| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright (C) 2017 Synopsys, Inc. All rights reserved. |
| */ |
| /dts-v1/; |
| |
| #include "skeleton.dtsi" |
| #include "dt-bindings/clock/snps,hsdk-cgu.h" |
| |
| / { |
| model = "snps,hsdk"; |
| |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| aliases { |
| console = &uart0; |
| spi0 = &spi0; |
| }; |
| |
| cpu_card { |
| core_clk: core_clk { |
| #clock-cells = <0>; |
| compatible = "fixed-clock"; |
| clock-frequency = <500000000>; |
| u-boot,dm-pre-reloc; |
| }; |
| }; |
| |
| clk-fmeas { |
| clocks = <&cgu_clk CLK_ARC_PLL>, <&cgu_clk CLK_SYS_PLL>, |
| <&cgu_clk CLK_TUN_PLL>, <&cgu_clk CLK_DDR_PLL>, |
| <&cgu_clk CLK_ARC>, <&cgu_clk CLK_HDMI_PLL>, |
| <&cgu_clk CLK_TUN_TUN>, <&cgu_clk CLK_HDMI>, |
| <&cgu_clk CLK_SYS_APB>, <&cgu_clk CLK_SYS_AXI>, |
| <&cgu_clk CLK_SYS_ETH>, <&cgu_clk CLK_SYS_USB>, |
| <&cgu_clk CLK_SYS_SDIO>, <&cgu_clk CLK_SYS_HDMI>, |
| <&cgu_clk CLK_SYS_GFX_CORE>, <&cgu_clk CLK_SYS_GFX_DMA>, |
| <&cgu_clk CLK_SYS_GFX_CFG>, <&cgu_clk CLK_SYS_DMAC_CORE>, |
| <&cgu_clk CLK_SYS_DMAC_CFG>, <&cgu_clk CLK_SYS_SDIO_REF>, |
| <&cgu_clk CLK_SYS_SPI_REF>, <&cgu_clk CLK_SYS_I2C_REF>, |
| <&cgu_clk CLK_SYS_UART_REF>, <&cgu_clk CLK_SYS_EBI_REF>, |
| <&cgu_clk CLK_TUN_ROM>, <&cgu_clk CLK_TUN_PWM>; |
| clock-names = "cpu-pll", "sys-pll", |
| "tun-pll", "ddr-clk", |
| "cpu-clk", "hdmi-pll", |
| "tun-clk", "hdmi-clk", |
| "apb-clk", "axi-clk", |
| "eth-clk", "usb-clk", |
| "sdio-clk", "hdmi-sys-clk", |
| "gfx-core-clk", "gfx-dma-clk", |
| "gfx-cfg-clk", "dmac-core-clk", |
| "dmac-cfg-clk", "sdio-ref-clk", |
| "spi-clk", "i2c-clk", |
| "uart-clk", "ebi-clk", |
| "rom-clk", "pwm-clk"; |
| }; |
| |
| cgu_clk: cgu-clk@f0000000 { |
| compatible = "snps,hsdk-cgu-clock"; |
| reg = <0xf0000000 0x10>, <0xf00014B8 0x4>; |
| #clock-cells = <1>; |
| }; |
| |
| uart0: serial0@f0005000 { |
| compatible = "snps,dw-apb-uart"; |
| reg = <0xf0005000 0x1000>; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| }; |
| |
| ethernet@f0008000 { |
| #interrupt-cells = <1>; |
| compatible = "snps,arc-dwmac-3.70a"; |
| reg = <0xf0008000 0x2000>; |
| phy-mode = "gmii"; |
| }; |
| |
| ehci@0xf0040000 { |
| compatible = "generic-ehci"; |
| reg = <0xf0040000 0x100>; |
| }; |
| |
| ohci@0xf0060000 { |
| compatible = "generic-ohci"; |
| reg = <0xf0060000 0x100>; |
| }; |
| |
| mmcclk_ciu: mmcclk-ciu { |
| compatible = "fixed-clock"; |
| /* |
| * DW sdio controller has external ciu clock divider |
| * controlled via register in SDIO IP. Due to its |
| * unexpected default value (it should divide by 1 |
| * but it divides by 8) SDIO IP uses wrong clock and |
| * works unstable (see STAR 9001204800) |
| * We switched to the minimum possible value of the |
| * divisor (div-by-2) in HSDK platform code. |
| * So default mmcclk ciu clock is 50000000 Hz. |
| */ |
| clock-frequency = <50000000>; |
| #clock-cells = <0>; |
| }; |
| |
| mmc: mmc0@f000a000 { |
| compatible = "snps,dw-mshc"; |
| reg = <0xf000a000 0x400>; |
| bus-width = <4>; |
| fifo-depth = <256>; |
| clocks = <&cgu_clk CLK_SYS_SDIO>, <&mmcclk_ciu>; |
| clock-names = "biu", "ciu"; |
| max-frequency = <25000000>; |
| }; |
| |
| spi0: spi@f0020000 { |
| compatible = "snps,dw-apb-ssi"; |
| reg = <0xf0020000 0x1000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| spi-max-frequency = <4000000>; |
| clocks = <&cgu_clk CLK_SYS_SPI_REF>; |
| clock-names = "spi_clk"; |
| cs-gpio = <&cs_gpio 0>; |
| spi_flash@0 { |
| compatible = "jedec,spi-nor"; |
| reg = <0>; |
| spi-max-frequency = <4000000>; |
| }; |
| }; |
| |
| cs_gpio: gpio@f00014b0 { |
| compatible = "snps,creg-gpio"; |
| reg = <0xf00014b0 0x4>; |
| gpio-controller; |
| #gpio-cells = <1>; |
| gpio-bank-name = "hsdk-spi-cs"; |
| gpio-count = <1>; |
| gpio-first-shift = <0>; |
| gpio-bit-per-line = <2>; |
| gpio-activate-val = <2>; |
| gpio-deactivate-val = <3>; |
| gpio-default-val = <1>; |
| }; |
| }; |