| Overview |
| -------- |
| The LS1046A Freeway Board (iFRWY) is a high-performance computing, |
| evaluation, and development platform that supports the QorIQ LS1046A |
| LayerScape Architecture processor. The FRWY-LS1046A provides SW development |
| platform for the Freescale LS1046A processor series, with a complete |
| debugging environment. The FRWY-LS1046A is lead-free and RoHS-compliant. |
| |
| LS1046A SoC Overview |
| -------------------- |
| Please refer arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc for LS1046A |
| SoC overview. |
| |
| FRWY-LS1046A board Overview |
| ----------------------- |
| - SERDES1 Connections, 4 lanes supporting: |
| - Lane0: Unused |
| - Lane1: Unused |
| - Lane2: QSGMII |
| - Lane3: Unused |
| - SERDES2 Connections, 4 lanes supporting: |
| - Lane0: Unused |
| - Lane1: PCIe3 with PCIe x1 slot |
| - Lane2: Unused |
| - Lane3: PCIe3 with PCIe x1 slot |
| - DDR Controller |
| - 8GB 64bits DDR4 SDRAM. Support rates of up to 2133MT/s |
| -IFC/Local Bus |
| - One 512 MB NAND flash with ECC support |
| - USB 3.0 |
| - Two Type A port |
| - SDHC: connects directly to a full microSD slot |
| - QSPI: 64 MB high-speed flash Memory for boot code and storage |
| - 4 I2C controllers |
| - UART |
| - Two 4-pin serial ports at up to 115.2 Kbit/s |
| - Two DB9 D-Type connectors supporting one Serial port each |
| - ARM JTAG support |
| |
| Memory map from core's view |
| ---------------------------- |
| Start Address End Address Description Size |
| 0x00_0000_0000 - 0x00_000F_FFFF Secure Boot ROM 1MB |
| 0x00_0100_0000 - 0x00_0FFF_FFFF CCSRBAR 240MB |
| 0x00_1000_0000 - 0x00_1000_FFFF OCRAM0 64KB |
| 0x00_1001_0000 - 0x00_1001_FFFF OCRAM1 64KB |
| 0x00_2000_0000 - 0x00_20FF_FFFF DCSR 16MB |
| 0x00_7E80_0000 - 0x00_7E80_FFFF IFC - NAND Flash 64KB |
| 0x00_7FB0_0000 - 0x00_7FB0_0FFF IFC - CPLD 4KB |
| 0x00_8000_0000 - 0x00_FFFF_FFFF DRAM1 2GB |
| 0x05_0000_0000 - 0x05_07FF_FFFF QMAN S/W Portal 128M |
| 0x05_0800_0000 - 0x05_0FFF_FFFF BMAN S/W Portal 128M |
| 0x08_8000_0000 - 0x09_FFFF_FFFF DRAM2 6GB |
| 0x40_0000_0000 - 0x47_FFFF_FFFF PCI Express1 32G |
| 0x48_0000_0000 - 0x4F_FFFF_FFFF PCI Express2 32G |
| 0x50_0000_0000 - 0x57_FFFF_FFFF PCI Express3 32G |
| |
| QSPI flash map: |
| Start Address End Address Description Size |
| 0x00_4000_0000 - 0x00_400F_FFFF RCW + PBI + BL2 1MB |
| 0x00_4010_0000 - 0x00_404F_FFFF FIP Image |
| (Bl31 + BL32(optee. |
| bin) + Bl33(uboot) |
| + headers for secure |
| boot) 4MB |
| 0x00_4050_0000 - 0x00_405F_FFFF Boot Firmware Env 1MB |
| 0x00_4060_0000 - 0x00_408F_FFFF Secure boot headers 3MB |
| 0x00_4090_0000 - 0x00_4093_FFFF FMan ucode 256KB |
| 0x00_4094_0000 - 0x00_4097_FFFF QE/uQE firmware 256KB |
| 0x00_409C_0000 - 0x00_409F_FFFF Reserved 256KB |
| 0x00_4100_0000 - 0x00_43FF_FFFF FIT Image 48MB |
| |
| Booting Options |
| --------------- |
| a) QSPI boot |
| b) microSD boot |
