| // SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause |
| /* |
| * Command for accessing Arcturus factory environment. |
| * |
| * Copyright 2013-2019 Arcturus Networks Inc. |
| * https://www.arcturusnetworks.com/products/ |
| * by Oleksandr G Zhadan et al. |
| * |
| */ |
| |
| #include <common.h> |
| #include <div64.h> |
| #include <env.h> |
| #include <malloc.h> |
| #include <spi_flash.h> |
| #include <mmc.h> |
| #include <version.h> |
| #include <asm/io.h> |
| |
| static ulong fwenv_addr[MAX_FWENV_ADDR]; |
| const char mystrerr[] = "ERROR: Failed to save factory info"; |
| |
| static int ishwaddr(char *hwaddr) |
| { |
| if (strlen(hwaddr) == MAX_HWADDR_SIZE) |
| if (hwaddr[2] == ':' && |
| hwaddr[5] == ':' && |
| hwaddr[8] == ':' && |
| hwaddr[11] == ':' && |
| hwaddr[14] == ':') |
| return 0; |
| return -1; |
| } |
| |
| #if (FWENV_TYPE == FWENV_MMC) |
| |
| static char smac[29][18] __attribute__ ((aligned(0x200))); /* 1 MMC block is 512 bytes */ |
| |
| int set_mmc_arc_product(int argc, char *const argv[]) |
| { |
| struct mmc *mmc; |
| u32 blk, cnt, n; |
| int i, err = 1; |
| void *addr; |
| const u8 mmc_dev_num = CONFIG_SYS_MMC_ENV_DEV; |
| |
| mmc = find_mmc_device(mmc_dev_num); |
| if (!mmc) { |
| printf("No SD/MMC/eMMC card found\n"); |
| return 0; |
| } |
| if (mmc_init(mmc)) { |
| printf("%s(%d) init failed\n", IS_SD(mmc) ? "SD" : "MMC", |
| mmc_dev_num); |
| return 0; |
| } |
| if (mmc_getwp(mmc) == 1) { |
| printf("Error: card is write protected!\n"); |
| return CMD_RET_FAILURE; |
| } |
| |
| /* Save factory defaults */ |
| addr = (void *)smac; |
| cnt = 1; /* One 512 bytes block */ |
| |
| for (i = 0; i < MAX_FWENV_ADDR; i++) |
| if (fwenv_addr[i] != -1) { |
| blk = fwenv_addr[i] / 512; |
| n = blk_dwrite(mmc_get_blk_desc(mmc), blk, cnt, addr); |
| if (n != cnt) |
| printf("%s: %s [%d]\n", __func__, mystrerr, i); |
| else |
| err = 0; |
| } |
| if (err) |
| return -2; |
| |
| return err; |
| } |
| |
| static int read_mmc_arc_info(void) |
| { |
| struct mmc *mmc; |
| u32 blk, cnt, n; |
| int i; |
| void *addr; |
| const u8 mmc_dev_num = CONFIG_SYS_MMC_ENV_DEV; |
| |
| mmc = find_mmc_device(mmc_dev_num); |
| if (!mmc) { |
| printf("No SD/MMC/eMMC card found\n"); |
| return 0; |
| } |
| if (mmc_init(mmc)) { |
| printf("%s(%d) init failed\n", IS_SD(mmc) ? "SD" : "MMC", |
| mmc_dev_num); |
| return 0; |
| } |
| |
| addr = (void *)smac; |
| cnt = 1; /* One 512 bytes block */ |
| |
| for (i = 0; i < MAX_FWENV_ADDR; i++) |
| if (fwenv_addr[i] != -1) { |
| blk = fwenv_addr[i] / 512; |
| n = blk_dread(mmc_get_blk_desc(mmc), blk, cnt, addr); |
| flush_cache((ulong) addr, 512); |
| if (n == cnt) |
| return (i + 1); |
| } |
| return 0; |
| } |
| #endif |
| |
| #if (FWENV_TYPE == FWENV_SPI_FLASH) |
| |
| static struct spi_flash *flash; |
| static char smac[4][18]; |
| |
| int set_spi_arc_product(int argc, char *const argv[]) |
| { |
| int i, err = 1; |
| |
| flash = spi_flash_probe(CONFIG_ENV_SPI_BUS, CONFIG_ENV_SPI_CS, |
| CONFIG_ENV_SPI_MAX_HZ, CONFIG_ENV_SPI_MODE); |
| if (!flash) { |
| printf("Failed to initialize SPI flash at %u:%u\n", |
| CONFIG_ENV_SPI_BUS, CONFIG_ENV_SPI_CS); |
| return -1; |
| } |
| |
| /* Save factory defaults */ |
| for (i = 0; i < MAX_FWENV_ADDR; i++) |
| if (fwenv_addr[i] != -1) |
| if (spi_flash_write |
| (flash, fwenv_addr[i], sizeof(smac), smac)) |
| printf("%s: %s [%d]\n", __func__, mystrerr, i); |
| else |
| err = 0; |
| if (err) |
| return -2; |
| |
| return err; |
| } |
| |
| static int read_spi_arc_info(void) |
| { |
| int i; |
| |
| flash = spi_flash_probe(CONFIG_ENV_SPI_BUS, CONFIG_ENV_SPI_CS, |
| CONFIG_ENV_SPI_MAX_HZ, CONFIG_ENV_SPI_MODE); |
| if (!flash) { |
| printf("Failed to initialize SPI flash at %u:%u\n", |
| CONFIG_ENV_SPI_BUS, CONFIG_ENV_SPI_CS); |
| return 0; |
| } |
| for (i = 0; i < MAX_FWENV_ADDR; i++) |
| if (fwenv_addr[i] != -1) |
| if (!spi_flash_read |
| (flash, fwenv_addr[i], sizeof(smac), smac)) |
| return (i + 1); |
| return 0; |
| } |
| #endif |
| |
| #if (FWENV_TYPE == FWENV_NOR_FLASH) |
| |
| static char smac[4][18]; |
| |
| int set_nor_arc_product(int argc, char *const argv[]) |
| { |
| int i, err = 1; |
| |
| /* Save factory defaults */ |
| for (i = 0; i < MAX_FWENV_ADDR; i++) |
| if (fwenv_addr[i] != -1) { |
| ulong fwenv_end = fwenv_addr[i] + 4; |
| |
| flash_sect_roundb(&fwenv_end); |
| flash_sect_protect(0, fwenv_addr[i], fwenv_end); |
| if (flash_write |
| ((char *)smac, fwenv_addr[i], sizeof(smac))) |
| printf("%s: %s [%d]\n", __func__, mystrerr, i); |
| else |
| err = 0; |
| flash_sect_protect(1, fwenv_addr[i], fwenv_end); |
| } |
| if (err) |
| return -2; |
| |
| return err; |
| } |
| |
| static int read_nor_arc_info(void) |
| { |
| int i; |
| |
| for (i = 0; i < MAX_FWENV_ADDR; i++) |
| if (fwenv_addr[i] != -1) { |
| memcpy(smac, (void *)fwenv_addr[i], sizeof(smac)); |
| return (i + 1); |
| } |
| |
| return 0; |
| } |
| #endif |
| |
| int set_arc_product(int argc, char *const argv[]) |
| { |
| if (argc != 5) |
| return -1; |
| |
| /* Check serial number */ |
| if (strlen(argv[1]) != MAX_SERIAL_SIZE) |
| return -1; |
| |
| /* Check HWaddrs */ |
| if (ishwaddr(argv[2]) || ishwaddr(argv[3]) || ishwaddr(argv[4])) |
| return -1; |
| |
| strcpy(smac[0], argv[1]); |
| strcpy(smac[1], argv[2]); |
| strcpy(smac[2], argv[3]); |
| strcpy(smac[3], argv[4]); |
| |
| #if (FWENV_TYPE == FWENV_NOR_FLASH) |
| return set_nor_arc_product(argc, argv); |
| #endif |
| #if (FWENV_TYPE == FWENV_SPI_FLASH) |
| return set_spi_arc_product(argc, argv); |
| #endif |
| #if (FWENV_TYPE == FWENV_MMC) |
| return set_mmc_arc_product(argc, argv); |
| #endif |
| return -2; |
| } |
| |
| static int read_arc_info(void) |
| { |
| #if (FWENV_TYPE == FWENV_NOR_FLASH) |
| return read_nor_arc_info(); |
| #endif |
| #if (FWENV_TYPE == FWENV_SPI_FLASH) |
| return read_spi_arc_info(); |
| #endif |
| #if (FWENV_TYPE == FWENV_MMC) |
| return read_mmc_arc_info(); |
| #endif |
| return 0; |
| } |
| |
| static int do_get_arc_info(void) |
| { |
| int l = read_arc_info(); |
| char *oldserial = env_get("SERIAL"); |
| char *oldversion = env_get("VERSION"); |
| |
| if (oldversion != NULL) |
| if (strcmp(oldversion, U_BOOT_VERSION) != 0) |
| oldversion = NULL; |
| |
| if (l == 0) { |
| printf("%s: failed to read factory info\n", __func__); |
| return -2; |
| } |
| |
| printf("\rSERIAL: "); |
| if (smac[0][0] == EMPY_CHAR) { |
| printf("<not found>\n"); |
| } else { |
| printf("%s\n", smac[0]); |
| env_set("SERIAL", smac[0]); |
| } |
| |
| if (strcmp(smac[1], "00:00:00:00:00:00") == 0) { |
| env_set("ethaddr", NULL); |
| env_set("eth1addr", NULL); |
| env_set("eth2addr", NULL); |
| goto done; |
| } |
| |
| printf("HWADDR0: "); |
| if (smac[1][0] == EMPY_CHAR) { |
| printf("<not found>\n"); |
| } else { |
| char *ret = env_get("ethaddr"); |
| |
| if (ret == NULL) { |
| env_set("ethaddr", smac[1]); |
| printf("%s\n", smac[1]); |
| } else if (strcmp(ret, __stringify(CONFIG_ETHADDR)) == 0) { |
| env_set("ethaddr", smac[1]); |
| printf("%s (factory)\n", smac[1]); |
| } else { |
| printf("%s\n", ret); |
| } |
| } |
| |
| if (strcmp(smac[2], "00:00:00:00:00:00") == 0) { |
| env_set("eth1addr", NULL); |
| env_set("eth2addr", NULL); |
| goto done; |
| } |
| |
| printf("HWADDR1: "); |
| if (smac[2][0] == EMPY_CHAR) { |
| printf("<not found>\n"); |
| } else { |
| char *ret = env_get("eth1addr"); |
| |
| if (ret == NULL) { |
| env_set("ethaddr", smac[2]); |
| printf("%s\n", smac[2]); |
| } else if (strcmp(ret, __stringify(CONFIG_ETH1ADDR)) == 0) { |
| env_set("eth1addr", smac[2]); |
| printf("%s (factory)\n", smac[2]); |
| } else { |
| printf("%s\n", ret); |
| } |
| } |
| |
| if (strcmp(smac[3], "00:00:00:00:00:00") == 0) { |
| env_set("eth2addr", NULL); |
| goto done; |
| } |
| |
| printf("HWADDR2: "); |
| if (smac[3][0] == EMPY_CHAR) { |
| printf("<not found>\n"); |
| } else { |
| char *ret = env_get("eth2addr"); |
| |
| if (ret == NULL) { |
| env_set("ethaddr", smac[3]); |
| printf("%s\n", smac[3]); |
| } else if (strcmp(ret, __stringify(CONFIG_ETH2ADDR)) == 0) { |
| env_set("eth2addr", smac[3]); |
| printf("%s (factory)\n", smac[3]); |
| } else { |
| printf("%s\n", ret); |
| } |
| } |
| done: |
| if (oldserial == NULL || oldversion == NULL) { |
| if (oldversion == NULL) |
| env_set("VERSION", U_BOOT_VERSION); |
| env_save(); |
| } |
| |
| return 0; |
| } |
| |
| static int init_fwenv(void) |
| { |
| int i, ret = -1; |
| |
| fwenv_addr[0] = FWENV_ADDR1; |
| fwenv_addr[1] = FWENV_ADDR2; |
| fwenv_addr[2] = FWENV_ADDR3; |
| fwenv_addr[3] = FWENV_ADDR4; |
| |
| for (i = 0; i < MAX_FWENV_ADDR; i++) |
| if (fwenv_addr[i] != -1) |
| ret = 0; |
| if (ret) |
| printf("%s: No firmfare info storage address is defined\n", |
| __func__); |
| return ret; |
| } |
| |
| void get_arc_info(void) |
| { |
| if (!init_fwenv()) |
| do_get_arc_info(); |
| } |
| |
| static int do_arc_cmd(cmd_tbl_t * cmdtp, int flag, int argc, char *const argv[]) |
| { |
| const char *cmd; |
| int ret = -1; |
| |
| cmd = argv[1]; |
| --argc; |
| ++argv; |
| |
| if (init_fwenv()) |
| return ret; |
| |
| if (strcmp(cmd, "product") == 0) |
| ret = set_arc_product(argc, argv); |
| else if (strcmp(cmd, "info") == 0) |
| ret = do_get_arc_info(); |
| |
| if (ret == -1) |
| return CMD_RET_USAGE; |
| |
| return ret; |
| } |
| |
| U_BOOT_CMD(arc, 6, 1, do_arc_cmd, |
| "Arcturus product command sub-system", |
| "product serial hwaddr0 hwaddr1 hwaddr2 - save Arcturus factory env\n" |
| "info - show Arcturus factory env\n\n"); |