| /* SPDX-License-Identifier: GPL-2.0+ */ |
| /* |
| * This header file describes this specific Xtensa processor's TIE extensions |
| * that extend basic Xtensa core functionality. It is customized to this |
| * Xtensa processor configuration. |
| * This file is autogenerated, please do not edit. |
| * |
| * Copyright (C) 1999-2015 Cadence Design Systems Inc. |
| */ |
| |
| #ifndef _XTENSA_CORE_TIE_H |
| #define _XTENSA_CORE_TIE_H |
| |
| #define XCHAL_CP_NUM 0 /* number of coprocessors */ |
| #define XCHAL_CP_MAX 0 /* max CP ID + 1 (0 if none) */ |
| #define XCHAL_CP_MASK 0x00 /* bitmask of all CPs by ID */ |
| #define XCHAL_CP_PORT_MASK 0x00 /* bitmask of only port CPs */ |
| |
| /* Save area for non-coprocessor optional and custom (TIE) state: */ |
| #define XCHAL_NCP_SA_SIZE 28 |
| #define XCHAL_NCP_SA_ALIGN 4 |
| |
| /* Total save area for optional and custom state (NCP + CPn): */ |
| #define XCHAL_TOTAL_SA_SIZE 32 /* with 16-byte align padding */ |
| #define XCHAL_TOTAL_SA_ALIGN 4 /* actual minimum alignment */ |
| |
| /* |
| * Detailed contents of save areas. |
| * NOTE: caller must define the XCHAL_SA_REG macro (not defined here) |
| * before expanding the XCHAL_xxx_SA_LIST() macros. |
| * |
| * XCHAL_SA_REG(s,ccused,abikind,kind,opt,name,galign,align,asize, |
| * dbnum,base,regnum,bitsz,gapsz,reset,x...) |
| * |
| * s = passed from XCHAL_*_LIST(s), eg. to select how to expand |
| * ccused = set if used by compiler without special options or code |
| * abikind = 0 (caller-saved), 1 (callee-saved), or 2 (thread-global) |
| * kind = 0 (special reg), 1 (TIE user reg), or 2 (TIE regfile reg) |
| * opt = 0 (custom TIE extension or coprocessor), or 1 (optional reg) |
| * name = lowercase reg name (no quotes) |
| * galign = group byte alignment (power of 2) (galign >= align) |
| * align = register byte alignment (power of 2) |
| * asize = allocated size in bytes (asize*8 == bitsz + gapsz + padsz) |
| * (not including any pad bytes required to galign this or next reg) |
| * dbnum = unique target number f/debug (see <xtensa-libdb-macros.h>) |
| * base = reg shortname w/o index (or sr=special, ur=TIE user reg) |
| * regnum = reg index in regfile, or special/TIE-user reg number |
| * bitsz = number of significant bits (regfile width, or ur/sr mask bits) |
| * gapsz = intervening bits, if bitsz bits not stored contiguously |
| * (padsz = pad bits at end [TIE regfile] or at msbits [ur,sr] of asize) |
| * reset = register reset value (or 0 if undefined at reset) |
| * x = reserved for future use (0 until then) |
| * |
| * To filter out certain registers, e.g. to expand only the non-global |
| * registers used by the compiler, you can do something like this: |
| * |
| * #define XCHAL_SA_REG(s,ccused,p...) SELCC##ccused(p) |
| * #define SELCC0(p...) |
| * #define SELCC1(abikind,p...) SELAK##abikind(p) |
| * #define SELAK0(p...) REG(p) |
| * #define SELAK1(p...) REG(p) |
| * #define SELAK2(p...) |
| * #define REG(kind,tie,name,galn,aln,asz,csz,dbnum,base,rnum,bsz,rst,x...) \ |
| * ...what you want to expand... |
| */ |
| |
| #define XCHAL_NCP_SA_NUM 7 |
| #define XCHAL_NCP_SA_LIST(s) \ |
| XCHAL_SA_REG(s,1,0,0,1, acclo, 4, 4, 4,0x0210, sr,16 , 32,0,0,0) \ |
| XCHAL_SA_REG(s,1,0,0,1, acchi, 4, 4, 4,0x0211, sr,17 , 8,0,0,0) \ |
| XCHAL_SA_REG(s,0,0,0,1, scompare1, 4, 4, 4,0x020C, sr,12 , 32,0,0,0) \ |
| XCHAL_SA_REG(s,0,0,0,1, m0, 4, 4, 4,0x0220, sr,32 , 32,0,0,0) \ |
| XCHAL_SA_REG(s,0,0,0,1, m1, 4, 4, 4,0x0221, sr,33 , 32,0,0,0) \ |
| XCHAL_SA_REG(s,0,0,0,1, m2, 4, 4, 4,0x0222, sr,34 , 32,0,0,0) \ |
| XCHAL_SA_REG(s,0,0,0,1, m3, 4, 4, 4,0x0223, sr,35 , 32,0,0,0) |
| |
| #define XCHAL_CP0_SA_NUM 0 |
| #define XCHAL_CP0_SA_LIST(s) /* empty */ |
| |
| #define XCHAL_CP1_SA_NUM 0 |
| #define XCHAL_CP1_SA_LIST(s) /* empty */ |
| |
| #define XCHAL_CP2_SA_NUM 0 |
| #define XCHAL_CP2_SA_LIST(s) /* empty */ |
| |
| #define XCHAL_CP3_SA_NUM 0 |
| #define XCHAL_CP3_SA_LIST(s) /* empty */ |
| |
| #define XCHAL_CP4_SA_NUM 0 |
| #define XCHAL_CP4_SA_LIST(s) /* empty */ |
| |
| #define XCHAL_CP5_SA_NUM 0 |
| #define XCHAL_CP5_SA_LIST(s) /* empty */ |
| |
| #define XCHAL_CP6_SA_NUM 0 |
| #define XCHAL_CP6_SA_LIST(s) /* empty */ |
| |
| #define XCHAL_CP7_SA_NUM 0 |
| #define XCHAL_CP7_SA_LIST(s) /* empty */ |
| |
| /* Byte length of instruction from its first nibble (op0 field), per FLIX. */ |
| #define XCHAL_OP0_FORMAT_LENGTHS 3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,3 |
| /* Byte length of instruction from its first byte, per FLIX. */ |
| #define XCHAL_BYTE0_FORMAT_LENGTHS \ |
| 3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,3, 3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,3,\ |
| 3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,3, 3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,3,\ |
| 3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,3, 3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,3,\ |
| 3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,3, 3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,3,\ |
| 3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,3, 3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,3,\ |
| 3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,3, 3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,3,\ |
| 3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,3, 3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,3,\ |
| 3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,3, 3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,3 |
| |
| #endif /*_XTENSA_CORE_TIE_H*/ |
| |
