| /* SPDX-License-Identifier: GPL-2.0+ */ |
| /* |
| * (C) Copyright 2015 Miao Yan <yanmiaobest@gmail.com> |
| */ |
| |
| #ifndef __FW_CFG__ |
| #define __FW_CFG__ |
| |
| #include <linux/list.h> |
| |
| enum qemu_fwcfg_items { |
| FW_CFG_SIGNATURE = 0x00, |
| FW_CFG_ID = 0x01, |
| FW_CFG_UUID = 0x02, |
| FW_CFG_RAM_SIZE = 0x03, |
| FW_CFG_NOGRAPHIC = 0x04, |
| FW_CFG_NB_CPUS = 0x05, |
| FW_CFG_MACHINE_ID = 0x06, |
| FW_CFG_KERNEL_ADDR = 0x07, |
| FW_CFG_KERNEL_SIZE = 0x08, |
| FW_CFG_KERNEL_CMDLINE = 0x09, |
| FW_CFG_INITRD_ADDR = 0x0a, |
| FW_CFG_INITRD_SIZE = 0x0b, |
| FW_CFG_BOOT_DEVICE = 0x0c, |
| FW_CFG_NUMA = 0x0d, |
| FW_CFG_BOOT_MENU = 0x0e, |
| FW_CFG_MAX_CPUS = 0x0f, |
| FW_CFG_KERNEL_ENTRY = 0x10, |
| FW_CFG_KERNEL_DATA = 0x11, |
| FW_CFG_INITRD_DATA = 0x12, |
| FW_CFG_CMDLINE_ADDR = 0x13, |
| FW_CFG_CMDLINE_SIZE = 0x14, |
| FW_CFG_CMDLINE_DATA = 0x15, |
| FW_CFG_SETUP_ADDR = 0x16, |
| FW_CFG_SETUP_SIZE = 0x17, |
| FW_CFG_SETUP_DATA = 0x18, |
| FW_CFG_FILE_DIR = 0x19, |
| FW_CFG_FILE_FIRST = 0x20, |
| FW_CFG_WRITE_CHANNEL = 0x4000, |
| FW_CFG_ARCH_LOCAL = 0x8000, |
| FW_CFG_INVALID = 0xffff, |
| }; |
| |
| enum { |
| BIOS_LINKER_LOADER_COMMAND_ALLOCATE = 0x1, |
| BIOS_LINKER_LOADER_COMMAND_ADD_POINTER = 0x2, |
| BIOS_LINKER_LOADER_COMMAND_ADD_CHECKSUM = 0x3, |
| }; |
| |
| enum { |
| BIOS_LINKER_LOADER_ALLOC_ZONE_HIGH = 0x1, |
| BIOS_LINKER_LOADER_ALLOC_ZONE_FSEG = 0x2, |
| }; |
| |
| #define FW_CFG_FILE_SLOTS 0x10 |
| #define FW_CFG_MAX_ENTRY (FW_CFG_FILE_FIRST + FW_CFG_FILE_SLOTS) |
| #define FW_CFG_ENTRY_MASK ~(FW_CFG_WRITE_CHANNEL | FW_CFG_ARCH_LOCAL) |
| |
| #define FW_CFG_MAX_FILE_PATH 56 |
| #define BIOS_LINKER_LOADER_FILESZ FW_CFG_MAX_FILE_PATH |
| |
| #define QEMU_FW_CFG_SIGNATURE (('Q' << 24) | ('E' << 16) | ('M' << 8) | 'U') |
| |
| #define FW_CFG_DMA_ERROR (1 << 0) |
| #define FW_CFG_DMA_READ (1 << 1) |
| #define FW_CFG_DMA_SKIP (1 << 2) |
| #define FW_CFG_DMA_SELECT (1 << 3) |
| |
| #define FW_CFG_DMA_ENABLED (1 << 1) |
| |
| struct fw_cfg_file { |
| __be32 size; |
| __be16 select; |
| __be16 reserved; |
| char name[FW_CFG_MAX_FILE_PATH]; |
| }; |
| |
| struct fw_file { |
| struct fw_cfg_file cfg; /* firmware file information */ |
| unsigned long addr; /* firmware file in-memory address */ |
| struct list_head list; /* list node to link to fw_list */ |
| }; |
| |
| struct fw_cfg_file_iter { |
| struct list_head *entry; /* structure to iterate file list */ |
| }; |
| |
| struct fw_cfg_dma_access { |
| __be32 control; |
| __be32 length; |
| __be64 address; |
| }; |
| |
| struct fw_cfg_arch_ops { |
| void (*arch_read_pio)(uint16_t selector, uint32_t size, |
| void *address); |
| void (*arch_read_dma)(struct fw_cfg_dma_access *dma); |
| }; |
| |
| struct bios_linker_entry { |
| __le32 command; |
| union { |
| /* |
| * COMMAND_ALLOCATE - allocate a table from @alloc.file |
| * subject to @alloc.align alignment (must be power of 2) |
| * and @alloc.zone (can be HIGH or FSEG) requirements. |
| * |
| * Must appear exactly once for each file, and before |
| * this file is referenced by any other command. |
| */ |
| struct { |
| char file[BIOS_LINKER_LOADER_FILESZ]; |
| __le32 align; |
| uint8_t zone; |
| } alloc; |
| |
| /* |
| * COMMAND_ADD_POINTER - patch the table (originating from |
| * @dest_file) at @pointer.offset, by adding a pointer to the |
| * table originating from @src_file. 1,2,4 or 8 byte unsigned |
| * addition is used depending on @pointer.size. |
| */ |
| struct { |
| char dest_file[BIOS_LINKER_LOADER_FILESZ]; |
| char src_file[BIOS_LINKER_LOADER_FILESZ]; |
| __le32 offset; |
| uint8_t size; |
| } pointer; |
| |
| /* |
| * COMMAND_ADD_CHECKSUM - calculate checksum of the range |
| * specified by @cksum_start and @cksum_length fields, |
| * and then add the value at @cksum.offset. |
| * Checksum simply sums -X for each byte X in the range |
| * using 8-bit math. |
| */ |
| struct { |
| char file[BIOS_LINKER_LOADER_FILESZ]; |
| __le32 offset; |
| __le32 start; |
| __le32 length; |
| } cksum; |
| |
| /* padding */ |
| char pad[124]; |
| }; |
| } __packed; |
| |
| /** |
| * Initialize QEMU fw_cfg interface |
| * |
| * @ops: arch specific read operations |
| */ |
| void qemu_fwcfg_init(struct fw_cfg_arch_ops *ops); |
| |
| void qemu_fwcfg_read_entry(uint16_t entry, uint32_t length, void *address); |
| int qemu_fwcfg_read_firmware_list(void); |
| struct fw_file *qemu_fwcfg_find_file(const char *name); |
| |
| /** |
| * Get system cpu number |
| * |
| * @return: cpu number in system |
| */ |
| int qemu_fwcfg_online_cpus(void); |
| |
| /* helper functions to iterate firmware file list */ |
| struct fw_file *qemu_fwcfg_file_iter_init(struct fw_cfg_file_iter *iter); |
| struct fw_file *qemu_fwcfg_file_iter_next(struct fw_cfg_file_iter *iter); |
| bool qemu_fwcfg_file_iter_end(struct fw_cfg_file_iter *iter); |
| |
| bool qemu_fwcfg_present(void); |
| bool qemu_fwcfg_dma_present(void); |
| |
| #endif |