include/configs/uniphier.h - u-boot-mtk - Git at Google

 /* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright (C) 2012-2015 Panasonic Corporation
  * Copyright (C) 2015-2016 Socionext Inc.
  *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
  */

 /* U-Boot - Common settings for UniPhier Family */

 #ifndef __CONFIG_UNIPHIER_COMMON_H__
 #define __CONFIG_UNIPHIER_COMMON_H__

 #ifndef CONFIG_SPL_BUILD
 #include <config_distro_bootcmd.h>

 #ifdef CONFIG_CMD_MMC
 #define BOOT_TARGET_DEVICE_MMC(func)	func(MMC, mmc, 0) func(MMC, mmc, 1)
 #else
 #define BOOT_TARGET_DEVICE_MMC(func)
 #endif

 #ifdef CONFIG_CMD_UBIFS
 #define BOOT_TARGET_DEVICE_UBIFS(func)	func(UBIFS, ubifs, 0)
 #else
 #define BOOT_TARGET_DEVICE_UBIFS(func)
 #endif

 #ifdef CONFIG_CMD_USB
 #define BOOT_TARGET_DEVICE_USB(func)	func(USB, usb, 0)
 #else
 #define BOOT_TARGET_DEVICE_USB(func)
 #endif

 #define BOOT_TARGET_DEVICES(func)	\
 	BOOT_TARGET_DEVICE_MMC(func)	\
 	BOOT_TARGET_DEVICE_UBIFS(func)	\
 	BOOT_TARGET_DEVICE_USB(func)
 #else
 #define BOOTENV
 #endif

 #define CONFIG_ARMV7_PSCI_1_0

 /*-----------------------------------------------------------------------
  * MMU and Cache Setting
  *----------------------------------------------------------------------*/

 #define CONFIG_SYS_MALLOC_LEN		(4 * 1024 * 1024)

 #define CONFIG_TIMESTAMP

 /* FLASH related */

 #define CONFIG_SYS_MAX_FLASH_SECT	256
 #define CONFIG_SYS_MONITOR_BASE		0
 #define CONFIG_SYS_MONITOR_LEN		0x000d0000	/* 832KB */
 #define CONFIG_SYS_FLASH_BASE		0

 /*
  * flash_toggle does not work for our support card.
  * We need to use flash_status_poll.
  */
 #define CONFIG_SYS_CFI_FLASH_STATUS_POLL

 #define CONFIG_FLASH_SHOW_PROGRESS	45 /* count down from 45/5: 9..1 */

 #define CONFIG_SYS_MAX_FLASH_BANKS_DETECT 1

 /* serial console configuration */

 #define CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size */
 /* Boot Argument Buffer Size */
 #define CONFIG_SYS_BARGSIZE		(CONFIG_SYS_CBSIZE)

 #define CONFIG_ENV_OFFSET			0x100000
 #define CONFIG_ENV_SIZE				0x2000
 /* #define CONFIG_ENV_OFFSET_REDUND	(CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) */

 #define CONFIG_SYS_MMC_ENV_DEV		0
 #define CONFIG_SYS_MMC_ENV_PART		1

 #if !defined(CONFIG_ARM64)
 /* Time clock 1MHz */
 #define CONFIG_SYS_TIMER_RATE			1000000
 #endif

 #define CONFIG_SYS_MAX_NAND_DEVICE			1
 #define CONFIG_SYS_NAND_ONFI_DETECTION
 #define CONFIG_SYS_NAND_REGS_BASE			0x68100000
 #define CONFIG_SYS_NAND_DATA_BASE			0x68000000
 #define CONFIG_SYS_NAND_BAD_BLOCK_POS			0

 /*
  * Network Configuration
  */
 #define CONFIG_SERVERIP			192.168.11.1
 #define CONFIG_IPADDR			192.168.11.10
 #define CONFIG_GATEWAYIP		192.168.11.1
 #define CONFIG_NETMASK			255.255.255.0

 #define CONFIG_SYS_LOAD_ADDR		0x85000000
 #define CONFIG_SYS_BOOTM_LEN		(32 << 20)

 #if defined(CONFIG_ARM64)
 /* ARM Trusted Firmware */
 #define BOOT_IMAGES \
 	"second_image=unph_bl.bin\0" \
 	"third_image=fip.bin\0"
 #else
 #define BOOT_IMAGES \
 	"second_image=u-boot-spl.bin\0" \
 	"third_image=u-boot.bin\0"
 #endif

 #define CONFIG_ROOTPATH			"/nfs/root/path"
 #define CONFIG_NFSBOOTCOMMAND						\
 	"setenv bootargs $bootargs root=/dev/nfs rw "			\
 	"nfsroot=$serverip:$rootpath "					\
 	"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off;" \
 		"run __nfsboot"

 #ifdef CONFIG_FIT
 #define CONFIG_BOOTFILE			"fitImage"
 #define KERNEL_ADDR_R_OFFSET		"0x05100000"
 #define LINUXBOOT_ENV_SETTINGS \
 	"tftpboot=tftpboot $kernel_addr_r $bootfile &&" \
 		"bootm $kernel_addr_r\0" \
 	"__nfsboot=run tftpboot\0"
 #else
 #ifdef CONFIG_ARM64
 #define CONFIG_BOOTFILE			"Image"
 #define LINUXBOOT_CMD			"booti"
 #define KERNEL_ADDR_R_OFFSET		"0x02080000"
 #else
 #define CONFIG_BOOTFILE			"zImage"
 #define LINUXBOOT_CMD			"bootz"
 #define KERNEL_ADDR_R_OFFSET		"0x00208000"
 #endif
 #define LINUXBOOT_ENV_SETTINGS \
 	"boot_common=setexpr bootm_low $kernel_addr_r '&' fe000000 && " \
 		LINUXBOOT_CMD " $kernel_addr_r $ramdisk_addr_r $fdt_addr_r\0" \
 	"tftpboot=tftpboot $kernel_addr_r $bootfile && " \
 		"tftpboot $fdt_addr_r $fdtfile &&" \
 		"tftpboot $ramdisk_addr_r $ramdisk_file &&" \
 		"setenv ramdisk_addr_r $ramdisk_addr_r:$filesize &&" \
 		"run boot_common\0" \
 	"__nfsboot=tftpboot $kernel_addr_load $bootfile && " \
 		"tftpboot $fdt_addr_r $fdtfile &&" \
 		"setenv ramdisk_addr_r - &&" \
 		"run boot_common\0"
 #endif

 #define	CONFIG_EXTRA_ENV_SETTINGS				\
 	"fdt_addr_r_offset=0x05100000\0" \
 	"kernel_addr_r_offset=" KERNEL_ADDR_R_OFFSET "\0" \
 	"ramdisk_addr_r_offset=0x06000000\0" \
 	"ramdisk_file=rootfs.cpio.gz\0" \
 	"netdev=eth0\0"						\
 	"initrd_high=0xffffffffffffffff\0"			\
 	"loadaddr_offset=0x05000000\0" \
 	"script=boot.scr\0" \
 	"scriptaddr=0x85000000\0"				\
 	"nor_base=0x42000000\0"					\
 	"emmcboot=mmcsetn && run bootcmd_mmc${mmc_first_dev}\0" \
 	"nandboot=run bootcmd_ubifs0\0" \
 	"norboot=run tftpboot\0" \
 	"usbboot=run bootcmd_usb0\0" \
 	"emmcscript=setenv devtype mmc && " \
 		"mmcsetn && " \
 		"setenv devnum ${mmc_first_dev} && " \
 		"run loadscript_fat\0" \
 	"nandscript=echo Running ${script} from ubi ... && " \
 		"ubi part UBI && " \
 		"ubifsmount ubi0:boot && " \
 		"ubifsload ${loadaddr} ${script} && " \
 		"source\0" \
 	"norscript=echo Running ${script} from tftp ... && " \
 		"tftpboot ${script} &&" \
 		"source\0" \
 	"usbscript=usb start && " \
 		"setenv devtype usb && " \
 		"setenv devnum 0 && " \
 		"run loadscript_fat\0" \
 	"loadscript_fat=echo Running ${script} from ${devtype}${devnum} ... && " \
 		"load ${devtype} ${devnum}:1 ${loadaddr} ${script} && " \
 		"source\0" \
 	"sramupdate=setexpr tmp_addr $nor_base + 0x50000 &&"	\
 		"tftpboot $tmp_addr $second_image && " \
 		"setexpr tmp_addr $nor_base + 0x70000 && " \
 		"tftpboot $tmp_addr $third_image\0" \
 	"emmcupdate=mmcsetn &&"					\
 		"mmc dev $mmc_first_dev &&"			\
 		"mmc partconf $mmc_first_dev 0 1 1 &&"		\
 		"tftpboot $second_image && " \
 		"mmc write $loadaddr 0 100 && " \
 		"tftpboot $third_image && " \
 		"mmc write $loadaddr 100 f00\0" \
 	"nandupdate=nand erase 0 0x00100000 &&"			\
 		"tftpboot $second_image && " \
 		"nand write $loadaddr 0 0x00020000 && " \
 		"tftpboot $third_image && " \
 		"nand write $loadaddr 0x00020000 0x001e0000\0" \
 	"usbupdate=usb start &&" \
 		"tftpboot $second_image && " \
 		"usb write $loadaddr 0 100 && " \
 		"tftpboot $third_image && " \
 		"usb write $loadaddr 100 f00\0" \
 	BOOT_IMAGES \
 	LINUXBOOT_ENV_SETTINGS \
 	BOOTENV

 #define CONFIG_SYS_BOOTMAPSZ			0x20000000

 #define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_TEXT_BASE)

 /* only for SPL */
 #define CONFIG_SPL_STACK		(0x00200000)

 #define CONFIG_SYS_NAND_U_BOOT_OFFS		0x20000

 /* subtract sizeof(struct image_header) */
 #define CONFIG_SYS_UBOOT_BASE			(0x130000 - 0x40)

 #define CONFIG_SPL_TARGET			"u-boot-with-spl.bin"
 #define CONFIG_SPL_MAX_FOOTPRINT		0x10000
 #define CONFIG_SPL_MAX_SIZE			0x10000
 #define CONFIG_SPL_BSS_MAX_SIZE			0x2000

 #define CONFIG_SPL_PAD_TO			0x20000

 #endif /* __CONFIG_UNIPHIER_COMMON_H__ */
	/* SPDX-License-Identifier: GPL-2.0+ */
	/*
	* Copyright (C) 2012-2015 Panasonic Corporation
	* Copyright (C) 2015-2016 Socionext Inc.
	* Author: Masahiro Yamada <yamada.masahiro@socionext.com>
	*/

	/* U-Boot - Common settings for UniPhier Family */

	#ifndef __CONFIG_UNIPHIER_COMMON_H__
	#define __CONFIG_UNIPHIER_COMMON_H__

	#ifndef CONFIG_SPL_BUILD
	#include <config_distro_bootcmd.h>

	#ifdef CONFIG_CMD_MMC
	#define BOOT_TARGET_DEVICE_MMC(func) func(MMC, mmc, 0) func(MMC, mmc, 1)
	#else
	#define BOOT_TARGET_DEVICE_MMC(func)
	#endif

	#ifdef CONFIG_CMD_UBIFS
	#define BOOT_TARGET_DEVICE_UBIFS(func) func(UBIFS, ubifs, 0)
	#else
	#define BOOT_TARGET_DEVICE_UBIFS(func)
	#endif

	#ifdef CONFIG_CMD_USB
	#define BOOT_TARGET_DEVICE_USB(func) func(USB, usb, 0)
	#else
	#define BOOT_TARGET_DEVICE_USB(func)
	#endif

	#define BOOT_TARGET_DEVICES(func) \
	BOOT_TARGET_DEVICE_MMC(func) \
	BOOT_TARGET_DEVICE_UBIFS(func) \
	BOOT_TARGET_DEVICE_USB(func)
	#else
	#define BOOTENV
	#endif

	#define CONFIG_ARMV7_PSCI_1_0

	/*-----------------------------------------------------------------------
	* MMU and Cache Setting
	----------------------------------------------------------------------/

	#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024)

	#define CONFIG_TIMESTAMP

	/* FLASH related */

	#define CONFIG_SYS_MAX_FLASH_SECT 256
	#define CONFIG_SYS_MONITOR_BASE 0
	#define CONFIG_SYS_MONITOR_LEN 0x000d0000 /* 832KB */
	#define CONFIG_SYS_FLASH_BASE 0

	/*
	* flash_toggle does not work for our support card.
	* We need to use flash_status_poll.
	*/
	#define CONFIG_SYS_CFI_FLASH_STATUS_POLL

	#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */

	#define CONFIG_SYS_MAX_FLASH_BANKS_DETECT 1

	/* serial console configuration */

	#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
	/* Boot Argument Buffer Size */
	#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE)

	#define CONFIG_ENV_OFFSET 0x100000
	#define CONFIG_ENV_SIZE 0x2000
	/* #define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) */

	#define CONFIG_SYS_MMC_ENV_DEV 0
	#define CONFIG_SYS_MMC_ENV_PART 1

	#if !defined(CONFIG_ARM64)
	/* Time clock 1MHz */
	#define CONFIG_SYS_TIMER_RATE 1000000
	#endif

	#define CONFIG_SYS_MAX_NAND_DEVICE 1
	#define CONFIG_SYS_NAND_ONFI_DETECTION
	#define CONFIG_SYS_NAND_REGS_BASE 0x68100000
	#define CONFIG_SYS_NAND_DATA_BASE 0x68000000
	#define CONFIG_SYS_NAND_BAD_BLOCK_POS 0

	/*
	* Network Configuration
	*/
	#define CONFIG_SERVERIP 192.168.11.1
	#define CONFIG_IPADDR 192.168.11.10
	#define CONFIG_GATEWAYIP 192.168.11.1
	#define CONFIG_NETMASK 255.255.255.0

	#define CONFIG_SYS_LOAD_ADDR 0x85000000
	#define CONFIG_SYS_BOOTM_LEN (32 << 20)

	#if defined(CONFIG_ARM64)
	/* ARM Trusted Firmware */
	#define BOOT_IMAGES \
	"second_image=unph_bl.bin\0" \
	"third_image=fip.bin\0"
	#else
	#define BOOT_IMAGES \
	"second_image=u-boot-spl.bin\0" \
	"third_image=u-boot.bin\0"
	#endif

	#define CONFIG_ROOTPATH "/nfs/root/path"
	#define CONFIG_NFSBOOTCOMMAND \
	"setenv bootargs $bootargs root=/dev/nfs rw " \
	"nfsroot=$serverip:$rootpath " \
	"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off;" \
	"run __nfsboot"

	#ifdef CONFIG_FIT
	#define CONFIG_BOOTFILE "fitImage"
	#define KERNEL_ADDR_R_OFFSET "0x05100000"
	#define LINUXBOOT_ENV_SETTINGS \
	"tftpboot=tftpboot $kernel_addr_r $bootfile &&" \
	"bootm $kernel_addr_r\0" \
	"__nfsboot=run tftpboot\0"
	#else
	#ifdef CONFIG_ARM64
	#define CONFIG_BOOTFILE "Image"
	#define LINUXBOOT_CMD "booti"
	#define KERNEL_ADDR_R_OFFSET "0x02080000"
	#else
	#define CONFIG_BOOTFILE "zImage"
	#define LINUXBOOT_CMD "bootz"
	#define KERNEL_ADDR_R_OFFSET "0x00208000"
	#endif
	#define LINUXBOOT_ENV_SETTINGS \
	"boot_common=setexpr bootm_low $kernel_addr_r '&' fe000000 && " \
	LINUXBOOT_CMD " $kernel_addr_r $ramdisk_addr_r $fdt_addr_r\0" \
	"tftpboot=tftpboot $kernel_addr_r $bootfile && " \
	"tftpboot $fdt_addr_r $fdtfile &&" \
	"tftpboot $ramdisk_addr_r $ramdisk_file &&" \
	"setenv ramdisk_addr_r $ramdisk_addr_r:$filesize &&" \
	"run boot_common\0" \
	"__nfsboot=tftpboot $kernel_addr_load $bootfile && " \
	"tftpboot $fdt_addr_r $fdtfile &&" \
	"setenv ramdisk_addr_r - &&" \
	"run boot_common\0"
	#endif

	#define CONFIG_EXTRA_ENV_SETTINGS \
	"fdt_addr_r_offset=0x05100000\0" \
	"kernel_addr_r_offset=" KERNEL_ADDR_R_OFFSET "\0" \
	"ramdisk_addr_r_offset=0x06000000\0" \
	"ramdisk_file=rootfs.cpio.gz\0" \
	"netdev=eth0\0" \
	"initrd_high=0xffffffffffffffff\0" \
	"loadaddr_offset=0x05000000\0" \
	"script=boot.scr\0" \
	"scriptaddr=0x85000000\0" \
	"nor_base=0x42000000\0" \
	"emmcboot=mmcsetn && run bootcmd_mmc${mmc_first_dev}\0" \
	"nandboot=run bootcmd_ubifs0\0" \
	"norboot=run tftpboot\0" \
	"usbboot=run bootcmd_usb0\0" \
	"emmcscript=setenv devtype mmc && " \
	"mmcsetn && " \
	"setenv devnum ${mmc_first_dev} && " \
	"run loadscript_fat\0" \
	"nandscript=echo Running ${script} from ubi ... && " \
	"ubi part UBI && " \
	"ubifsmount ubi0:boot && " \
	"ubifsload ${loadaddr} ${script} && " \
	"source\0" \
	"norscript=echo Running ${script} from tftp ... && " \
	"tftpboot ${script} &&" \
	"source\0" \
	"usbscript=usb start && " \
	"setenv devtype usb && " \
	"setenv devnum 0 && " \
	"run loadscript_fat\0" \
	"loadscript_fat=echo Running ${script} from ${devtype}${devnum} ... && " \
	"load ${devtype} ${devnum}:1 ${loadaddr} ${script} && " \
	"source\0" \
	"sramupdate=setexpr tmp_addr $nor_base + 0x50000 &&" \
	"tftpboot $tmp_addr $second_image && " \
	"setexpr tmp_addr $nor_base + 0x70000 && " \
	"tftpboot $tmp_addr $third_image\0" \
	"emmcupdate=mmcsetn &&" \
	"mmc dev $mmc_first_dev &&" \
	"mmc partconf $mmc_first_dev 0 1 1 &&" \
	"tftpboot $second_image && " \
	"mmc write $loadaddr 0 100 && " \
	"tftpboot $third_image && " \
	"mmc write $loadaddr 100 f00\0" \
	"nandupdate=nand erase 0 0x00100000 &&" \
	"tftpboot $second_image && " \
	"nand write $loadaddr 0 0x00020000 && " \
	"tftpboot $third_image && " \
	"nand write $loadaddr 0x00020000 0x001e0000\0" \
	"usbupdate=usb start &&" \
	"tftpboot $second_image && " \
	"usb write $loadaddr 0 100 && " \
	"tftpboot $third_image && " \
	"usb write $loadaddr 100 f00\0" \
	BOOT_IMAGES \
	LINUXBOOT_ENV_SETTINGS \
	BOOTENV

	#define CONFIG_SYS_BOOTMAPSZ 0x20000000

	#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE)

	/* only for SPL */
	#define CONFIG_SPL_STACK (0x00200000)

	#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x20000

	/* subtract sizeof(struct image_header) */
	#define CONFIG_SYS_UBOOT_BASE (0x130000 - 0x40)

	#define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
	#define CONFIG_SPL_MAX_FOOTPRINT 0x10000
	#define CONFIG_SPL_MAX_SIZE 0x10000
	#define CONFIG_SPL_BSS_MAX_SIZE 0x2000

	#define CONFIG_SPL_PAD_TO 0x20000

	#endif /* __CONFIG_UNIPHIER_COMMON_H__ */