include/configs/etamin.h - u-boot-mtk - Git at Google

 /* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * (C) Copyright 2013 Siemens Schweiz AG
  * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de.
  *
  * Based on:
  * U-Boot file:/include/configs/am335x_evm.h
  *
  * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
  */

 #ifndef __CONFIG_ETAMIN_H
 #define __CONFIG_ETAMIN_H

 #include "siemens-am33x-common.h"
 /* NAND specific changes for etamin due to different page size */
 #undef CONFIG_SYS_NAND_PAGE_SIZE
 #undef CONFIG_SYS_NAND_OOBSIZE
 #undef CONFIG_SYS_NAND_BLOCK_SIZE
 #undef CONFIG_SYS_NAND_ECCPOS
 #undef CONFIG_SYS_NAND_U_BOOT_OFFS
 #undef CONFIG_SYS_ENV_SECT_SIZE
 #undef CONFIG_ENV_OFFSET
 #undef CONFIG_NAND_OMAP_ECCSCHEME
 #define CONFIG_NAND_OMAP_ECCSCHEME	OMAP_ECC_BCH16_CODE_HW

 #define CONFIG_ENV_OFFSET       0x980000
 #define CONFIG_SYS_ENV_SECT_SIZE       (512 << 10)     /* 512 KiB */
 #define CONFIG_SYS_NAND_PAGE_SIZE       4096
 #define CONFIG_SYS_NAND_OOBSIZE         224
 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128 * CONFIG_SYS_NAND_PAGE_SIZE)
 #define CONFIG_SYS_NAND_ECCPOS	{ 2, 3, 4, 5, 6, 7, 8, 9, \
 				10, 11, 12, 13, 14, 15, 16, 17, 18, 19, \
 				20, 21, 22, 23, 24, 25, 26, 27, 28, 29, \
 				30, 31, 32, 33, 34, 35, 36, 37, 38, 39, \
 				40, 41, 42, 43, 44, 45, 46, 47, 48, 49, \
 				50, 51, 52, 53, 54, 55, 56, 57, 58, 59, \
 				60, 61, 62, 63, 64, 65, 66, 67, 68, 69, \
 				70, 71, 72, 73, 74, 75, 76, 77, 78, 79, \
 				80, 81, 82, 83, 84, 85, 86, 87, 88, 89, \
 				90, 91, 92, 93, 94, 95, 96, 97, 98, 99, \
 			100, 101, 102, 103, 104, 105, 106, 107, 108, 109, \
 			110, 111, 112, 113, 114, 115, 116, 117, 118, 119, \
 			120, 121, 122, 123, 124, 125, 126, 127, 128, 129, \
 			130, 131, 132, 133, 134, 135, 136, 137, 138, 139, \
 			140, 141, 142, 143, 144, 145, 146, 147, 148, 149, \
 			150, 151, 152, 153, 154, 155, 156, 157, 158, 159, \
 			160, 161, 162, 163, 164, 165, 166, 167, 168, 169, \
 			170, 171, 172, 173, 174, 175, 176, 177, 178, 179, \
 			180, 181, 182, 183, 184, 185, 186, 187, 188, 189, \
 			190, 191, 192, 193, 194, 195, 196, 197, 198, 199, \
 			200, 201, 202, 203, 204, 205, 206, 207, 208, 209, \
 			}

 #undef CONFIG_SYS_NAND_ECCSIZE
 #undef CONFIG_SYS_NAND_ECCBYTES
 #define CONFIG_SYS_NAND_ECCSIZE 512
 #define CONFIG_SYS_NAND_ECCBYTES 26

 #define CONFIG_SYS_NAND_U_BOOT_OFFS     0x200000

 #define CONFIG_SYS_NAND_MAX_CHIPS       1

 #undef CONFIG_SYS_MAX_NAND_DEVICE
 #define CONFIG_SYS_MAX_NAND_DEVICE      3
 #define CONFIG_SYS_NAND_BASE2           (0x18000000)    /* physical address */
 #define CONFIG_SYS_NAND_BASE_LIST       {CONFIG_SYS_NAND_BASE, \
 					CONFIG_SYS_NAND_BASE2}

 #define CONFIG_SYS_NAND_ONFI_DETECTION
 #define DDR_PLL_FREQ	303

 /* FWD Button = 27
  * SRV Button = 87 */
 #define BOARD_DFU_BUTTON_GPIO	27
 #define GPIO_LAN9303_NRST	88	/* GPIO2_24 = gpio88 */
 /* In dfu mode keep led1 on */
 #define CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \
 	"button_dfu0=27\0" \
 	"button_dfu1=87\0" \
 	"led0=3,0,1\0" \
 	"led1=4,0,0\0" \
 	"led2=5,0,1\0" \
 	"led3=87,0,1\0" \
 	"led4=60,0,1\0" \
 	"led5=63,0,1\0"

 /* Physical Memory Map */
 #define CONFIG_MAX_RAM_BANK_SIZE       (1024 << 20)    /* 1GB */

 /* I2C Configuration */
 #define CONFIG_SYS_I2C_SPEED		100000

 #define CONFIG_SYS_I2C_EEPROM_ADDR              0x50
 #define EEPROM_ADDR_DDR3 0x90
 #define EEPROM_ADDR_CHIP 0x120

 #define CONFIG_PHY_SMSC

 #define CONFIG_FACTORYSET

 /* use both define to compile a SPL compliance test  */
 /*
 #define CONFIG_SPL_CMT
 #define CONFIG_SPL_CMT_DEBUG
 */

 /* nedded by compliance test in read mode */
 #if defined(CONFIG_SPL_CMT)
 #define CONFIG_SYS_DCACHE_OFF
 #endif

 /* Define own nand partitions */
 #define CONFIG_ENV_OFFSET_REDUND	0xB80000
 #define CONFIG_ENV_SIZE_REDUND		CONFIG_ENV_SIZE
 #define CONFIG_ENV_RANGE		(4 * CONFIG_SYS_ENV_SECT_SIZE)


 #undef COMMON_ENV_DFU_ARGS
 #define COMMON_ENV_DFU_ARGS	"dfu_args=run bootargs_defaults;" \
 				"setenv bootargs ${bootargs};" \
 				"mtdparts default;" \
 				"draco_led 1;" \
 				"dfu 0 mtd 0;" \
 				"draco_led 0;\0" \

 #undef DFU_ALT_INFO_NAND_V2
 #define DFU_ALT_INFO_NAND_V2 \
 	"spl mtddev;" \
 	"spl.backup1 mtddev;" \
 	"spl.backup2 mtddev;" \
 	"spl.backup3 mtddev;" \
 	"u-boot mtddev;" \
 	"u-boot.env0 mtddev;" \
 	"u-boot.env1 mtddev;" \
 	"rootfs mtddevubi" \

 #undef CONFIG_ENV_SETTINGS_NAND_V2
 #define CONFIG_ENV_SETTINGS_NAND_V2 \
 	"nand_active_ubi_vol=rootfs_a\0" \
 	"rootfs_name=rootfs\0" \
 	"kernel_name=uImage\0"\
 	"nand_root_fs_type=ubifs rootwait=1\0" \
 	"nand_args=run bootargs_defaults;" \
 		"mtdparts default;" \
 		"setenv ${partitionset_active} true;" \
 		"if test -n ${A}; then " \
 			"setenv nand_active_ubi_vol ${rootfs_name}_a;" \
 		"fi;" \
 		"if test -n ${B}; then " \
 			"setenv nand_active_ubi_vol ${rootfs_name}_b;" \
 		"fi;" \
 		"setenv nand_root ubi0:${nand_active_ubi_vol} rw " \
 		"ubi.mtd=rootfs,${ubi_off};" \
 		"setenv bootargs ${bootargs} " \
 		"root=${nand_root} noinitrd ${mtdparts} " \
 		"rootfstype=${nand_root_fs_type} ip=${ip_method} " \
 		"console=ttyMTD,mtdoops console=ttyO0,115200n8 mtdoops.mtddev" \
 		"=mtdoops\0" \
 	COMMON_ENV_DFU_ARGS \
 		"dfu_alt_info=" DFU_ALT_INFO_NAND_V2 "\0" \
 	COMMON_ENV_NAND_BOOT \
 		"ubi part rootfs ${ubi_off};" \
 		"ubifsmount ubi0:${nand_active_ubi_vol};" \
 		"ubifsload ${kloadaddr} boot/${kernel_name};" \
 		"ubifsload ${loadaddr} boot/${dtb_name}.dtb;" \
 		"bootm ${kloadaddr} - ${loadaddr}\0" \
 	"nand_boot_backup=ubifsload ${loadaddr} boot/am335x-draco.dtb;" \
 		"bootm ${kloadaddr} - ${loadaddr}\0" \
 	COMMON_ENV_NAND_CMDS

 #ifndef CONFIG_SPL_BUILD

 #define CONFIG_NAND_CS_INIT
 #define ETAMIN_NAND_GPMC_CONFIG1	0x00000800
 #define ETAMIN_NAND_GPMC_CONFIG2	0x001e1e00
 #define ETAMIN_NAND_GPMC_CONFIG3	0x001e1e00
 #define ETAMIN_NAND_GPMC_CONFIG4	0x16051807
 #define ETAMIN_NAND_GPMC_CONFIG5	0x00151e1e
 #define ETAMIN_NAND_GPMC_CONFIG6	0x16000f80
 #define CONFIG_MTD_CONCAT

 /* Default env settings */
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	"hostname=etamin\0" \
 	"ubi_off=4096\0"\
 	"nand_img_size=0x400000\0" \
 	"optargs=\0" \
 	"preboot=draco_led 0\0" \
 	CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \
 	CONFIG_ENV_SETTINGS_V2 \
 	CONFIG_ENV_SETTINGS_NAND_V2

 #ifndef CONFIG_RESTORE_FLASH

 #define CONFIG_BOOTCOMMAND \
 "if dfubutton; then " \
 	"run dfu_start; " \
 	"reset; " \
 "fi;" \
 "run nand_boot;" \
 "run nand_boot_backup;" \
 "reset;"


 #else
 #define CONFIG_BOOTCOMMAND			\
 	"setenv autoload no; "			\
 	"dhcp; "				\
 	"if tftp 80000000 debrick.scr; then "	\
 		"source 80000000; "		\
 	"fi"
 #endif
 #endif	/* CONFIG_SPL_BUILD */
 #endif	/* ! __CONFIG_ETAMIN_H */
	/* SPDX-License-Identifier: GPL-2.0+ */
	/*
	* (C) Copyright 2013 Siemens Schweiz AG
	* (C) Heiko Schocher, DENX Software Engineering, hs@denx.de.
	*
	* Based on:
	* U-Boot file:/include/configs/am335x_evm.h
	*
	* Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
	*/

	#ifndef __CONFIG_ETAMIN_H
	#define __CONFIG_ETAMIN_H

	#include "siemens-am33x-common.h"
	/* NAND specific changes for etamin due to different page size */
	#undef CONFIG_SYS_NAND_PAGE_SIZE
	#undef CONFIG_SYS_NAND_OOBSIZE
	#undef CONFIG_SYS_NAND_BLOCK_SIZE
	#undef CONFIG_SYS_NAND_ECCPOS
	#undef CONFIG_SYS_NAND_U_BOOT_OFFS
	#undef CONFIG_SYS_ENV_SECT_SIZE
	#undef CONFIG_ENV_OFFSET
	#undef CONFIG_NAND_OMAP_ECCSCHEME
	#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH16_CODE_HW

	#define CONFIG_ENV_OFFSET 0x980000
	#define CONFIG_SYS_ENV_SECT_SIZE (512 << 10) /* 512 KiB */
	#define CONFIG_SYS_NAND_PAGE_SIZE 4096
	#define CONFIG_SYS_NAND_OOBSIZE 224
	#define CONFIG_SYS_NAND_BLOCK_SIZE (128 * CONFIG_SYS_NAND_PAGE_SIZE)
	#define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \
	10, 11, 12, 13, 14, 15, 16, 17, 18, 19, \
	20, 21, 22, 23, 24, 25, 26, 27, 28, 29, \
	30, 31, 32, 33, 34, 35, 36, 37, 38, 39, \
	40, 41, 42, 43, 44, 45, 46, 47, 48, 49, \
	50, 51, 52, 53, 54, 55, 56, 57, 58, 59, \
	60, 61, 62, 63, 64, 65, 66, 67, 68, 69, \
	70, 71, 72, 73, 74, 75, 76, 77, 78, 79, \
	80, 81, 82, 83, 84, 85, 86, 87, 88, 89, \
	90, 91, 92, 93, 94, 95, 96, 97, 98, 99, \
	100, 101, 102, 103, 104, 105, 106, 107, 108, 109, \
	110, 111, 112, 113, 114, 115, 116, 117, 118, 119, \
	120, 121, 122, 123, 124, 125, 126, 127, 128, 129, \
	130, 131, 132, 133, 134, 135, 136, 137, 138, 139, \
	140, 141, 142, 143, 144, 145, 146, 147, 148, 149, \
	150, 151, 152, 153, 154, 155, 156, 157, 158, 159, \
	160, 161, 162, 163, 164, 165, 166, 167, 168, 169, \
	170, 171, 172, 173, 174, 175, 176, 177, 178, 179, \
	180, 181, 182, 183, 184, 185, 186, 187, 188, 189, \
	190, 191, 192, 193, 194, 195, 196, 197, 198, 199, \
	200, 201, 202, 203, 204, 205, 206, 207, 208, 209, \
	}

	#undef CONFIG_SYS_NAND_ECCSIZE
	#undef CONFIG_SYS_NAND_ECCBYTES
	#define CONFIG_SYS_NAND_ECCSIZE 512
	#define CONFIG_SYS_NAND_ECCBYTES 26

	#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x200000

	#define CONFIG_SYS_NAND_MAX_CHIPS 1

	#undef CONFIG_SYS_MAX_NAND_DEVICE
	#define CONFIG_SYS_MAX_NAND_DEVICE 3
	#define CONFIG_SYS_NAND_BASE2 (0x18000000) /* physical address */
	#define CONFIG_SYS_NAND_BASE_LIST {CONFIG_SYS_NAND_BASE, \
	CONFIG_SYS_NAND_BASE2}

	#define CONFIG_SYS_NAND_ONFI_DETECTION
	#define DDR_PLL_FREQ 303

	/* FWD Button = 27
	* SRV Button = 87 */
	#define BOARD_DFU_BUTTON_GPIO 27
	#define GPIO_LAN9303_NRST 88 /* GPIO2_24 = gpio88 */
	/* In dfu mode keep led1 on */
	#define CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \
	"button_dfu0=27\0" \
	"button_dfu1=87\0" \
	"led0=3,0,1\0" \
	"led1=4,0,0\0" \
	"led2=5,0,1\0" \
	"led3=87,0,1\0" \
	"led4=60,0,1\0" \
	"led5=63,0,1\0"

	/* Physical Memory Map */
	#define CONFIG_MAX_RAM_BANK_SIZE (1024 << 20) /* 1GB */

	/* I2C Configuration */
	#define CONFIG_SYS_I2C_SPEED 100000

	#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
	#define EEPROM_ADDR_DDR3 0x90
	#define EEPROM_ADDR_CHIP 0x120

	#define CONFIG_PHY_SMSC

	#define CONFIG_FACTORYSET

	/* use both define to compile a SPL compliance test */
	/*
	#define CONFIG_SPL_CMT
	#define CONFIG_SPL_CMT_DEBUG
	*/

	/* nedded by compliance test in read mode */
	#if defined(CONFIG_SPL_CMT)
	#define CONFIG_SYS_DCACHE_OFF
	#endif

	/* Define own nand partitions */
	#define CONFIG_ENV_OFFSET_REDUND 0xB80000
	#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
	#define CONFIG_ENV_RANGE (4 * CONFIG_SYS_ENV_SECT_SIZE)



	#undef COMMON_ENV_DFU_ARGS
	#define COMMON_ENV_DFU_ARGS "dfu_args=run bootargs_defaults;" \
	"setenv bootargs ${bootargs};" \
	"mtdparts default;" \
	"draco_led 1;" \
	"dfu 0 mtd 0;" \
	"draco_led 0;\0" \

	#undef DFU_ALT_INFO_NAND_V2
	#define DFU_ALT_INFO_NAND_V2 \
	"spl mtddev;" \
	"spl.backup1 mtddev;" \
	"spl.backup2 mtddev;" \
	"spl.backup3 mtddev;" \
	"u-boot mtddev;" \
	"u-boot.env0 mtddev;" \
	"u-boot.env1 mtddev;" \
	"rootfs mtddevubi" \

	#undef CONFIG_ENV_SETTINGS_NAND_V2
	#define CONFIG_ENV_SETTINGS_NAND_V2 \
	"nand_active_ubi_vol=rootfs_a\0" \
	"rootfs_name=rootfs\0" \
	"kernel_name=uImage\0"\
	"nand_root_fs_type=ubifs rootwait=1\0" \
	"nand_args=run bootargs_defaults;" \
	"mtdparts default;" \
	"setenv ${partitionset_active} true;" \
	"if test -n ${A}; then " \
	"setenv nand_active_ubi_vol ${rootfs_name}_a;" \
	"fi;" \
	"if test -n ${B}; then " \
	"setenv nand_active_ubi_vol ${rootfs_name}_b;" \
	"fi;" \
	"setenv nand_root ubi0:${nand_active_ubi_vol} rw " \
	"ubi.mtd=rootfs,${ubi_off};" \
	"setenv bootargs ${bootargs} " \
	"root=${nand_root} noinitrd ${mtdparts} " \
	"rootfstype=${nand_root_fs_type} ip=${ip_method} " \
	"console=ttyMTD,mtdoops console=ttyO0,115200n8 mtdoops.mtddev" \
	"=mtdoops\0" \
	COMMON_ENV_DFU_ARGS \
	"dfu_alt_info=" DFU_ALT_INFO_NAND_V2 "\0" \
	COMMON_ENV_NAND_BOOT \
	"ubi part rootfs ${ubi_off};" \
	"ubifsmount ubi0:${nand_active_ubi_vol};" \
	"ubifsload ${kloadaddr} boot/${kernel_name};" \
	"ubifsload ${loadaddr} boot/${dtb_name}.dtb;" \
	"bootm ${kloadaddr} - ${loadaddr}\0" \
	"nand_boot_backup=ubifsload ${loadaddr} boot/am335x-draco.dtb;" \
	"bootm ${kloadaddr} - ${loadaddr}\0" \
	COMMON_ENV_NAND_CMDS

	#ifndef CONFIG_SPL_BUILD

	#define CONFIG_NAND_CS_INIT
	#define ETAMIN_NAND_GPMC_CONFIG1 0x00000800
	#define ETAMIN_NAND_GPMC_CONFIG2 0x001e1e00
	#define ETAMIN_NAND_GPMC_CONFIG3 0x001e1e00
	#define ETAMIN_NAND_GPMC_CONFIG4 0x16051807
	#define ETAMIN_NAND_GPMC_CONFIG5 0x00151e1e
	#define ETAMIN_NAND_GPMC_CONFIG6 0x16000f80
	#define CONFIG_MTD_CONCAT

	/* Default env settings */
	#define CONFIG_EXTRA_ENV_SETTINGS \
	"hostname=etamin\0" \
	"ubi_off=4096\0"\
	"nand_img_size=0x400000\0" \
	"optargs=\0" \
	"preboot=draco_led 0\0" \
	CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \
	CONFIG_ENV_SETTINGS_V2 \
	CONFIG_ENV_SETTINGS_NAND_V2

	#ifndef CONFIG_RESTORE_FLASH

	#define CONFIG_BOOTCOMMAND \
	"if dfubutton; then " \
	"run dfu_start; " \
	"reset; " \
	"fi;" \
	"run nand_boot;" \
	"run nand_boot_backup;" \
	"reset;"


	#else
	#define CONFIG_BOOTCOMMAND \
	"setenv autoload no; " \
	"dhcp; " \
	"if tftp 80000000 debrick.scr; then " \
	"source 80000000; " \
	"fi"
	#endif
	#endif /* CONFIG_SPL_BUILD */
	#endif /* ! __CONFIG_ETAMIN_H */