| /* SPDX-License-Identifier: GPL-2.0+ */ |
| /* |
| * (C) Copyright 2014 |
| * Texas Instruments Incorporated. |
| * Felipe Balbi <balbi@ti.com> |
| * |
| * Configuration settings for the TI Beagle x15 board. |
| * See ti_omap5_common.h for omap5 common settings. |
| */ |
| |
| #ifndef __CONFIG_AM57XX_EVM_H |
| #define __CONFIG_AM57XX_EVM_H |
| |
| #include <environment/ti/dfu.h> |
| #include <linux/sizes.h> |
| |
| #define CONFIG_IODELAY_RECALIBRATION |
| |
| /* MMC ENV related defines */ |
| #define CONFIG_SYS_MMC_ENV_DEV 1 /* eMMC */ |
| #define CONFIG_SYS_MMC_ENV_PART 0 |
| #define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) |
| #define CONFIG_SYS_REDUNDAND_ENVIRONMENT |
| |
| #define CONFIG_SYS_BOOTM_LEN SZ_64M |
| |
| #define CONSOLEDEV "ttyS2" |
| #define CONFIG_SYS_NS16550_COM1 UART1_BASE /* Base EVM has UART0 */ |
| #define CONFIG_SYS_NS16550_COM2 UART2_BASE /* UART2 */ |
| #define CONFIG_SYS_NS16550_COM3 UART3_BASE /* UART3 */ |
| |
| #define CONFIG_ENV_EEPROM_IS_ON_I2C |
| #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* Main EEPROM */ |
| #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 |
| |
| #define CONFIG_SYS_OMAP_ABE_SYSCK |
| |
| #ifdef CONFIG_SPL_DFU |
| #ifndef CONFIG_SPL_BUILD |
| #define DFUARGS \ |
| "dfu_bufsiz=0x10000\0" \ |
| DFU_ALT_INFO_MMC \ |
| DFU_ALT_INFO_EMMC \ |
| DFU_ALT_INFO_RAM \ |
| DFU_ALT_INFO_QSPI |
| #else |
| #undef CONFIG_CMD_BOOTD |
| #define CONFIG_SPL_LOAD_FIT_ADDRESS 0x80200000 |
| #define DFUARGS \ |
| "dfu_bufsiz=0x10000\0" \ |
| DFU_ALT_INFO_RAM |
| #endif |
| #endif |
| |
| #include <configs/ti_omap5_common.h> |
| |
| /* Enhance our eMMC support / experience. */ |
| #define CONFIG_HSMMC2_8BIT |
| |
| /* CPSW Ethernet */ |
| #define CONFIG_BOOTP_DNS2 |
| #define CONFIG_BOOTP_SEND_HOSTNAME |
| #define CONFIG_NET_RETRY_COUNT 10 |
| #define PHY_ANEG_TIMEOUT 8000 /* PHY needs longer aneg time at 1G */ |
| |
| /* USB xHCI HOST */ |
| #define CONFIG_USB_XHCI_OMAP |
| |
| #define CONFIG_OMAP_USB3PHY1_HOST |
| |
| /* SATA */ |
| #define CONFIG_SCSI_AHCI_PLAT |
| #define CONFIG_SYS_SCSI_MAX_SCSI_ID 1 |
| #define CONFIG_SYS_SCSI_MAX_LUN 1 |
| #define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ |
| CONFIG_SYS_SCSI_MAX_LUN) |
| |
| /* |
| * Default to using SPI for environment, etc. |
| * 0x000000 - 0x040000 : QSPI.SPL (256KiB) |
| * 0x040000 - 0x140000 : QSPI.u-boot (1MiB) |
| * 0x140000 - 0x1C0000 : QSPI.u-boot-spl-os (512KiB) |
| * 0x1C0000 - 0x1D0000 : QSPI.u-boot-env (64KiB) |
| * 0x1D0000 - 0x1E0000 : QSPI.u-boot-env.backup1 (64KiB) |
| * 0x1E0000 - 0x9E0000 : QSPI.kernel (8MiB) |
| * 0x9E0000 - 0x2000000 : USERLAND |
| */ |
| #define CONFIG_SYS_SPI_KERNEL_OFFS 0x1E0000 |
| #define CONFIG_SYS_SPI_ARGS_OFFS 0x140000 |
| #define CONFIG_SYS_SPI_ARGS_SIZE 0x80000 |
| |
| /* SPI SPL */ |
| |
| #endif /* __CONFIG_AM57XX_EVM_H */ |
