| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright (C) 2012 Samsung Electronics |
| * R. Chandrasekar <rcsekar@samsung.com> |
| */ |
| |
| #include <common.h> |
| #include <dm.h> |
| #include <i2s.h> |
| #include <sound.h> |
| #include <asm/arch/clk.h> |
| #include <asm/arch/pinmux.h> |
| #include <asm/arch/i2s-regs.h> |
| #include <asm/io.h> |
| |
| #define FIC_TX2COUNT(x) (((x) >> 24) & 0xf) |
| #define FIC_TX1COUNT(x) (((x) >> 16) & 0xf) |
| #define FIC_TXCOUNT(x) (((x) >> 8) & 0xf) |
| #define FIC_RXCOUNT(x) (((x) >> 0) & 0xf) |
| #define FICS_TXCOUNT(x) (((x) >> 8) & 0x7f) |
| |
| #define TIMEOUT_I2S_TX 100 /* i2s transfer timeout */ |
| |
| /* |
| * Sets the frame size for I2S LR clock |
| * |
| * @param i2s_reg i2s register address |
| * @param rfs Frame Size |
| */ |
| static void i2s_set_lr_framesize(struct i2s_reg *i2s_reg, unsigned int rfs) |
| { |
| unsigned int mod = readl(&i2s_reg->mod); |
| |
| mod &= ~MOD_RCLK_MASK; |
| |
| switch (rfs) { |
| case 768: |
| mod |= MOD_RCLK_768FS; |
| break; |
| case 512: |
| mod |= MOD_RCLK_512FS; |
| break; |
| case 384: |
| mod |= MOD_RCLK_384FS; |
| break; |
| default: |
| mod |= MOD_RCLK_256FS; |
| break; |
| } |
| |
| writel(mod, &i2s_reg->mod); |
| } |
| |
| /* |
| * Sets the i2s transfer control |
| * |
| * @param i2s_reg i2s register address |
| * @param on 1 enable tx , 0 disable tx transfer |
| */ |
| static void i2s_txctrl(struct i2s_reg *i2s_reg, int on) |
| { |
| unsigned int con = readl(&i2s_reg->con); |
| unsigned int mod = readl(&i2s_reg->mod) & ~MOD_MASK; |
| |
| if (on) { |
| con |= CON_ACTIVE; |
| con &= ~CON_TXCH_PAUSE; |
| } else { |
| con |= CON_TXCH_PAUSE; |
| con &= ~CON_ACTIVE; |
| } |
| |
| writel(mod, &i2s_reg->mod); |
| writel(con, &i2s_reg->con); |
| } |
| |
| /* |
| * set the bit clock frame size (in multiples of LRCLK) |
| * |
| * @param i2s_reg i2s register address |
| * @param bfs bit Frame Size |
| */ |
| static void i2s_set_bitclk_framesize(struct i2s_reg *i2s_reg, unsigned bfs) |
| { |
| unsigned int mod = readl(&i2s_reg->mod); |
| |
| mod &= ~MOD_BCLK_MASK; |
| |
| switch (bfs) { |
| case 48: |
| mod |= MOD_BCLK_48FS; |
| break; |
| case 32: |
| mod |= MOD_BCLK_32FS; |
| break; |
| case 24: |
| mod |= MOD_BCLK_24FS; |
| break; |
| case 16: |
| mod |= MOD_BCLK_16FS; |
| break; |
| default: |
| return; |
| } |
| writel(mod, &i2s_reg->mod); |
| } |
| |
| /* |
| * flushes the i2stx fifo |
| * |
| * @param i2s_reg i2s register address |
| * @param flush Tx fifo flush command (0x00 - do not flush |
| * 0x80 - flush tx fifo) |
| */ |
| static void i2s_fifo(struct i2s_reg *i2s_reg, unsigned int flush) |
| { |
| /* Flush the FIFO */ |
| setbits_le32(&i2s_reg->fic, flush); |
| clrbits_le32(&i2s_reg->fic, flush); |
| } |
| |
| /* |
| * Set System Clock direction |
| * |
| * @param i2s_reg i2s register address |
| * @param dir Clock direction |
| * |
| * @return int value 0 for success, -1 in case of error |
| */ |
| static int i2s_set_sysclk_dir(struct i2s_reg *i2s_reg, int dir) |
| { |
| unsigned int mod = readl(&i2s_reg->mod); |
| |
| if (dir == SND_SOC_CLOCK_IN) |
| mod |= MOD_CDCLKCON; |
| else |
| mod &= ~MOD_CDCLKCON; |
| |
| writel(mod, &i2s_reg->mod); |
| |
| return 0; |
| } |
| |
| /* |
| * Sets I2S Clcok format |
| * |
| * @param fmt i2s clock properties |
| * @param i2s_reg i2s register address |
| * |
| * @return int value 0 for success, -1 in case of error |
| */ |
| static int i2s_set_fmt(struct i2s_reg *i2s_reg, unsigned int fmt) |
| { |
| unsigned int mod = readl(&i2s_reg->mod); |
| unsigned int tmp = 0; |
| unsigned int ret = 0; |
| |
| /* Format is priority */ |
| switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { |
| case SND_SOC_DAIFMT_RIGHT_J: |
| tmp |= MOD_LR_RLOW; |
| tmp |= MOD_SDF_MSB; |
| break; |
| case SND_SOC_DAIFMT_LEFT_J: |
| tmp |= MOD_LR_RLOW; |
| tmp |= MOD_SDF_LSB; |
| break; |
| case SND_SOC_DAIFMT_I2S: |
| tmp |= MOD_SDF_IIS; |
| break; |
| default: |
| debug("%s: Invalid format priority [0x%x]\n", __func__, |
| (fmt & SND_SOC_DAIFMT_FORMAT_MASK)); |
| return -ERANGE; |
| } |
| |
| /* |
| * INV flag is relative to the FORMAT flag - if set it simply |
| * flips the polarity specified by the Standard |
| */ |
| switch (fmt & SND_SOC_DAIFMT_INV_MASK) { |
| case SND_SOC_DAIFMT_NB_NF: |
| break; |
| case SND_SOC_DAIFMT_NB_IF: |
| if (tmp & MOD_LR_RLOW) |
| tmp &= ~MOD_LR_RLOW; |
| else |
| tmp |= MOD_LR_RLOW; |
| break; |
| default: |
| debug("%s: Invalid clock ploarity input [0x%x]\n", __func__, |
| (fmt & SND_SOC_DAIFMT_INV_MASK)); |
| return -ERANGE; |
| } |
| |
| switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { |
| case SND_SOC_DAIFMT_CBS_CFS: |
| tmp |= MOD_SLAVE; |
| break; |
| case SND_SOC_DAIFMT_CBM_CFM: |
| /* Set default source clock in Master mode */ |
| ret = i2s_set_sysclk_dir(i2s_reg, SND_SOC_CLOCK_OUT); |
| if (ret != 0) { |
| debug("%s:set i2s clock direction failed\n", __func__); |
| return ret; |
| } |
| break; |
| default: |
| debug("%s: Invalid master selection [0x%x]\n", __func__, |
| (fmt & SND_SOC_DAIFMT_MASTER_MASK)); |
| return -ERANGE; |
| } |
| |
| mod &= ~(MOD_SDF_MASK | MOD_LR_RLOW | MOD_SLAVE); |
| mod |= tmp; |
| writel(mod, &i2s_reg->mod); |
| |
| return 0; |
| } |
| |
| /* |
| * Sets the sample width in bits |
| * |
| * @param blc samplewidth (size of sample in bits) |
| * @param i2s_reg i2s register address |
| * |
| * @return int value 0 for success, -1 in case of error |
| */ |
| static int i2s_set_samplesize(struct i2s_reg *i2s_reg, unsigned int blc) |
| { |
| unsigned int mod = readl(&i2s_reg->mod); |
| |
| mod &= ~MOD_BLCP_MASK; |
| mod &= ~MOD_BLC_MASK; |
| |
| switch (blc) { |
| case 8: |
| mod |= MOD_BLCP_8BIT; |
| mod |= MOD_BLC_8BIT; |
| break; |
| case 16: |
| mod |= MOD_BLCP_16BIT; |
| mod |= MOD_BLC_16BIT; |
| break; |
| case 24: |
| mod |= MOD_BLCP_24BIT; |
| mod |= MOD_BLC_24BIT; |
| break; |
| default: |
| debug("%s: Invalid sample size input [0x%x]\n", |
| __func__, blc); |
| return -ERANGE; |
| } |
| writel(mod, &i2s_reg->mod); |
| |
| return 0; |
| } |
| |
| int i2s_transfer_tx_data(struct i2s_uc_priv *pi2s_tx, void *data, |
| uint data_size) |
| { |
| struct i2s_reg *i2s_reg = (struct i2s_reg *)pi2s_tx->base_address; |
| u32 *ptr; |
| int i; |
| int start; |
| |
| if (data_size < FIFO_LENGTH) { |
| debug("%s : Invalid data size\n", __func__); |
| return -ENODATA; /* invalid pcm data size */ |
| } |
| |
| /* fill the tx buffer before stating the tx transmit */ |
| for (i = 0, ptr = data; i < FIFO_LENGTH; i++) |
| writel(*ptr++, &i2s_reg->txd); |
| |
| data_size -= sizeof(*ptr) * FIFO_LENGTH; |
| i2s_txctrl(i2s_reg, I2S_TX_ON); |
| |
| while (data_size > 0) { |
| start = get_timer(0); |
| if (!(CON_TXFIFO_FULL & (readl(&i2s_reg->con)))) { |
| writel(*ptr++, &i2s_reg->txd); |
| data_size -= sizeof(*ptr); |
| } else { |
| if (get_timer(start) > TIMEOUT_I2S_TX) { |
| i2s_txctrl(i2s_reg, I2S_TX_OFF); |
| debug("%s: I2S Transfer Timeout\n", __func__); |
| return -ETIMEDOUT; |
| } |
| } |
| } |
| i2s_txctrl(i2s_reg, I2S_TX_OFF); |
| |
| return 0; |
| } |
| |
| static int i2s_tx_init(struct i2s_uc_priv *pi2s_tx) |
| { |
| int ret; |
| struct i2s_reg *i2s_reg = (struct i2s_reg *)pi2s_tx->base_address; |
| |
| if (pi2s_tx->id == 0) { |
| /* Initialize GPIO for I2S-0 */ |
| exynos_pinmux_config(PERIPH_ID_I2S0, 0); |
| |
| /* Set EPLL Clock */ |
| ret = set_epll_clk(pi2s_tx->samplingrate * pi2s_tx->rfs * 4); |
| } else if (pi2s_tx->id == 1) { |
| /* Initialize GPIO for I2S-1 */ |
| exynos_pinmux_config(PERIPH_ID_I2S1, 0); |
| |
| /* Set EPLL Clock */ |
| ret = set_epll_clk(pi2s_tx->audio_pll_clk); |
| } else { |
| debug("%s: unsupported i2s-%d bus\n", __func__, pi2s_tx->id); |
| return -ERANGE; |
| } |
| |
| if (ret) { |
| debug("%s: epll clock set rate failed\n", __func__); |
| return ret; |
| } |
| |
| /* Select Clk Source for Audio 0 or 1 */ |
| ret = set_i2s_clk_source(pi2s_tx->id); |
| if (ret) { |
| debug("%s: unsupported clock for i2s-%d\n", __func__, |
| pi2s_tx->id); |
| return ret; |
| } |
| |
| if (pi2s_tx->id == 0) { |
| /*Reset the i2s module */ |
| writel(CON_RESET, &i2s_reg->con); |
| |
| writel(MOD_OP_CLK | MOD_RCLKSRC, &i2s_reg->mod); |
| /* set i2s prescaler */ |
| writel(PSREN | PSVAL, &i2s_reg->psr); |
| } else { |
| /* Set Prescaler to get MCLK */ |
| ret = set_i2s_clk_prescaler(pi2s_tx->audio_pll_clk, |
| (pi2s_tx->samplingrate * (pi2s_tx->rfs)), |
| pi2s_tx->id); |
| } |
| if (ret) { |
| debug("%s: unsupported prescalar for i2s-%d\n", __func__, |
| pi2s_tx->id); |
| return ret; |
| } |
| |
| /* Configure I2s format */ |
| ret = i2s_set_fmt(i2s_reg, SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF | |
| SND_SOC_DAIFMT_CBM_CFM); |
| if (ret == 0) { |
| i2s_set_lr_framesize(i2s_reg, pi2s_tx->rfs); |
| ret = i2s_set_samplesize(i2s_reg, pi2s_tx->bitspersample); |
| if (ret != 0) { |
| debug("%s:set sample rate failed\n", __func__); |
| return ret; |
| } |
| |
| i2s_set_bitclk_framesize(i2s_reg, pi2s_tx->bfs); |
| /* disable i2s transfer flag and flush the fifo */ |
| i2s_txctrl(i2s_reg, I2S_TX_OFF); |
| i2s_fifo(i2s_reg, FIC_TXFLUSH); |
| } else { |
| debug("%s: failed\n", __func__); |
| } |
| |
| return ret; |
| } |
| |
| static int samsung_i2s_tx_data(struct udevice *dev, void *data, uint data_size) |
| { |
| struct i2s_uc_priv *priv = dev_get_uclass_priv(dev); |
| |
| return i2s_transfer_tx_data(priv, data, data_size); |
| } |
| |
| static int samsung_i2s_probe(struct udevice *dev) |
| { |
| struct i2s_uc_priv *priv = dev_get_uclass_priv(dev); |
| |
| return i2s_tx_init(priv); |
| } |
| |
| static int samsung_i2s_ofdata_to_platdata(struct udevice *dev) |
| { |
| struct i2s_uc_priv *priv = dev_get_uclass_priv(dev); |
| ulong base; |
| |
| /* |
| * Get the pre-defined sound specific values from FDT. |
| * All of these are expected to be correct otherwise |
| * wrong register values in i2s setup parameters |
| * may result in no sound play. |
| */ |
| base = dev_read_addr(dev); |
| if (base == FDT_ADDR_T_NONE) { |
| debug("%s: Missing i2s base\n", __func__); |
| return -EINVAL; |
| } |
| priv->base_address = base; |
| |
| if (dev_read_u32u(dev, "samsung,i2s-epll-clock-frequency", |
| &priv->audio_pll_clk)) |
| goto err; |
| debug("audio_pll_clk = %d\n", priv->audio_pll_clk); |
| if (dev_read_u32u(dev, "samsung,i2s-sampling-rate", |
| &priv->samplingrate)) |
| goto err; |
| debug("samplingrate = %d\n", priv->samplingrate); |
| if (dev_read_u32u(dev, "samsung,i2s-bits-per-sample", |
| &priv->bitspersample)) |
| goto err; |
| debug("bitspersample = %d\n", priv->bitspersample); |
| if (dev_read_u32u(dev, "samsung,i2s-channels", &priv->channels)) |
| goto err; |
| debug("channels = %d\n", priv->channels); |
| if (dev_read_u32u(dev, "samsung,i2s-lr-clk-framesize", &priv->rfs)) |
| goto err; |
| debug("rfs = %d\n", priv->rfs); |
| if (dev_read_u32u(dev, "samsung,i2s-bit-clk-framesize", &priv->bfs)) |
| goto err; |
| debug("bfs = %d\n", priv->bfs); |
| |
| if (dev_read_u32u(dev, "samsung,i2s-id", &priv->id)) |
| goto err; |
| debug("id = %d\n", priv->id); |
| |
| return 0; |
| |
| err: |
| debug("fail to get sound i2s node properties\n"); |
| |
| return -EINVAL; |
| } |
| |
| static const struct i2s_ops samsung_i2s_ops = { |
| .tx_data = samsung_i2s_tx_data, |
| }; |
| |
| static const struct udevice_id samsung_i2s_ids[] = { |
| { .compatible = "samsung,s5pv210-i2s" }, |
| { } |
| }; |
| |
| U_BOOT_DRIVER(samsung_i2s) = { |
| .name = "samsung_i2s", |
| .id = UCLASS_I2S, |
| .of_match = samsung_i2s_ids, |
| .probe = samsung_i2s_probe, |
| .ofdata_to_platdata = samsung_i2s_ofdata_to_platdata, |
| .ops = &samsung_i2s_ops, |
| }; |