| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * (C) Copyright 2007 |
| * Eran Liberty, Extricom , eran.liberty@gmail.com |
| */ |
| |
| #include <common.h> /* core U-Boot definitions */ |
| #include <altera.h> |
| |
| int StratixII_ps_fpp_load (Altera_desc * desc, void *buf, size_t bsize, |
| int isSerial, int isSecure); |
| int StratixII_ps_fpp_dump (Altera_desc * desc, void *buf, size_t bsize); |
| |
| /****************************************************************/ |
| /* Stratix II Generic Implementation */ |
| int StratixII_load (Altera_desc * desc, void *buf, size_t bsize) |
| { |
| int ret_val = FPGA_FAIL; |
| |
| switch (desc->iface) { |
| case passive_serial: |
| ret_val = StratixII_ps_fpp_load (desc, buf, bsize, 1, 0); |
| break; |
| case fast_passive_parallel: |
| ret_val = StratixII_ps_fpp_load (desc, buf, bsize, 0, 0); |
| break; |
| case fast_passive_parallel_security: |
| ret_val = StratixII_ps_fpp_load (desc, buf, bsize, 0, 1); |
| break; |
| |
| /* Add new interface types here */ |
| default: |
| printf ("%s: Unsupported interface type, %d\n", __FUNCTION__, |
| desc->iface); |
| } |
| return ret_val; |
| } |
| |
| int StratixII_dump (Altera_desc * desc, void *buf, size_t bsize) |
| { |
| int ret_val = FPGA_FAIL; |
| |
| switch (desc->iface) { |
| case passive_serial: |
| case fast_passive_parallel: |
| case fast_passive_parallel_security: |
| ret_val = StratixII_ps_fpp_dump (desc, buf, bsize); |
| break; |
| /* Add new interface types here */ |
| default: |
| printf ("%s: Unsupported interface type, %d\n", __FUNCTION__, |
| desc->iface); |
| } |
| return ret_val; |
| } |
| |
| int StratixII_info (Altera_desc * desc) |
| { |
| return FPGA_SUCCESS; |
| } |
| |
| int StratixII_ps_fpp_dump (Altera_desc * desc, void *buf, size_t bsize) |
| { |
| printf ("Stratix II Fast Passive Parallel dump is not implemented\n"); |
| return FPGA_FAIL; |
| } |
| |
| int StratixII_ps_fpp_load (Altera_desc * desc, void *buf, size_t bsize, |
| int isSerial, int isSecure) |
| { |
| altera_board_specific_func *fns; |
| int cookie; |
| int ret_val = FPGA_FAIL; |
| int bytecount; |
| char *buff = buf; |
| int i; |
| |
| if (!desc) { |
| printf ("%s(%d) Altera_desc missing\n", __FUNCTION__, __LINE__); |
| return FPGA_FAIL; |
| } |
| if (!buff) { |
| printf ("%s(%d) buffer is missing\n", __FUNCTION__, __LINE__); |
| return FPGA_FAIL; |
| } |
| if (!bsize) { |
| printf ("%s(%d) size is zero\n", __FUNCTION__, __LINE__); |
| return FPGA_FAIL; |
| } |
| if (!desc->iface_fns) { |
| printf |
| ("%s(%d) Altera_desc function interface table is missing\n", |
| __FUNCTION__, __LINE__); |
| return FPGA_FAIL; |
| } |
| fns = (altera_board_specific_func *) (desc->iface_fns); |
| cookie = desc->cookie; |
| |
| if (! |
| (fns->config && fns->status && fns->done && fns->data |
| && fns->abort)) { |
| printf |
| ("%s(%d) Missing some function in the function interface table\n", |
| __FUNCTION__, __LINE__); |
| return FPGA_FAIL; |
| } |
| |
| /* 1. give board specific a chance to do anything before we start */ |
| if (fns->pre) { |
| if ((ret_val = fns->pre (cookie)) < 0) { |
| return ret_val; |
| } |
| } |
| |
| /* from this point on we must fail gracfully by calling lower layer abort */ |
| |
| /* 2. Strat burn cycle by deasserting config for t_CFG and waiting t_CF2CK after reaserted */ |
| fns->config (0, 1, cookie); |
| udelay (5); /* nCONFIG low pulse width 2usec */ |
| fns->config (1, 1, cookie); |
| udelay (100); /* nCONFIG high to first rising edge on DCLK */ |
| |
| /* 3. Start the Data cycle with clk deasserted */ |
| bytecount = 0; |
| fns->clk (0, 1, cookie); |
| |
| printf ("loading to fpga "); |
| while (bytecount < bsize) { |
| /* 3.1 check stratix has not signaled us an error */ |
| if (fns->status (cookie) != 1) { |
| printf |
| ("\n%s(%d) Stratix failed (byte transferred till failure 0x%x)\n", |
| __FUNCTION__, __LINE__, bytecount); |
| fns->abort (cookie); |
| return FPGA_FAIL; |
| } |
| if (isSerial) { |
| int i; |
| uint8_t data = buff[bytecount++]; |
| for (i = 0; i < 8; i++) { |
| /* 3.2(ps) put data on the bus */ |
| fns->data ((data >> i) & 1, 1, cookie); |
| |
| /* 3.3(ps) clock once */ |
| fns->clk (1, 1, cookie); |
| fns->clk (0, 1, cookie); |
| } |
| } else { |
| /* 3.2(fpp) put data on the bus */ |
| fns->data (buff[bytecount++], 1, cookie); |
| |
| /* 3.3(fpp) clock once */ |
| fns->clk (1, 1, cookie); |
| fns->clk (0, 1, cookie); |
| |
| /* 3.4(fpp) for secure cycle push 3 more clocks */ |
| for (i = 0; isSecure && i < 3; i++) { |
| fns->clk (1, 1, cookie); |
| fns->clk (0, 1, cookie); |
| } |
| } |
| |
| /* 3.5 while clk is deasserted it is safe to print some progress indication */ |
| if ((bytecount % (bsize / 100)) == 0) { |
| printf ("\b\b\b%02d\%", bytecount * 100 / bsize); |
| } |
| } |
| |
| /* 4. Set one last clock and check conf done signal */ |
| fns->clk (1, 1, cookie); |
| udelay (100); |
| if (!fns->done (cookie)) { |
| printf (" error!.\n"); |
| fns->abort (cookie); |
| return FPGA_FAIL; |
| } else { |
| printf ("\b\b\b done.\n"); |
| } |
| |
| /* 5. call lower layer post configuration */ |
| if (fns->post) { |
| if ((ret_val = fns->post (cookie)) < 0) { |
| fns->abort (cookie); |
| return ret_val; |
| } |
| } |
| |
| return FPGA_SUCCESS; |
| } |