| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Copyright (C) 2018 Stefan Roese <sr@denx.de> |
| */ |
| |
| /dts-v1/; |
| |
| #include "mt7628a.dtsi" |
| #include <dt-bindings/gpio/gpio.h> |
| |
| / { |
| compatible = "gardena,smart-gateway-mt7688", "ralink,mt7628a-soc"; |
| model = "GARDENA smart Gateway (MT7688)"; |
| |
| aliases { |
| serial0 = &uart0; |
| spi0 = &spi0; |
| }; |
| |
| memory@0 { |
| device_type = "memory"; |
| reg = <0x0 0x08000000>; |
| }; |
| |
| leds { |
| compatible = "gpio-leds"; |
| |
| power_blue { |
| label = "smartgw:power:blue"; |
| gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>; |
| default-state = "off"; |
| }; |
| |
| power_green { |
| label = "smartgw:power:green"; |
| gpios = <&gpio0 19 GPIO_ACTIVE_HIGH>; |
| default-state = "on"; |
| }; |
| |
| power_red { |
| label = "smartgw:power:red"; |
| gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>; |
| default-state = "off"; |
| }; |
| |
| radio_blue { |
| label = "smartgw:radio:blue"; |
| gpios = <&gpio0 23 GPIO_ACTIVE_HIGH>; |
| default-state = "off"; |
| }; |
| |
| radio_green { |
| label = "smartgw:radio:green"; |
| gpios = <&gpio0 24 GPIO_ACTIVE_HIGH>; |
| default-state = "off"; |
| }; |
| |
| radio_red { |
| label = "smartgw:radio:red"; |
| gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>; |
| default-state = "off"; |
| }; |
| |
| internet_blue { |
| label = "smartgw:internet:blue"; |
| gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>; |
| default-state = "off"; |
| }; |
| |
| internet_green { |
| label = "smartgw:internet:green"; |
| gpios = <&gpio0 27 GPIO_ACTIVE_HIGH>; |
| default-state = "off"; |
| }; |
| |
| internet_red { |
| label = "smartgw:internet:red"; |
| gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>; |
| default-state = "off"; |
| }; |
| }; |
| |
| chosen { |
| stdout-path = &uart0; |
| }; |
| }; |
| |
| &uart0 { |
| status = "okay"; |
| clock-frequency = <40000000>; |
| }; |
| |
| &spi0 { |
| status = "okay"; |
| num-cs = <2>; |
| |
| spi-flash@0 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "jedec,spi-nor"; |
| spi-max-frequency = <40000000>; |
| reg = <0>; |
| }; |
| |
| spi-nand@1 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "spi-nand"; |
| spi-max-frequency = <40000000>; |
| reg = <1>; |
| }; |
| }; |