| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright (C) 2016 Google, Inc |
| */ |
| |
| #include <common.h> |
| #include <dm.h> |
| #include <errno.h> |
| #include <fdtdec.h> |
| #include <pch.h> |
| #include <pci.h> |
| #include <asm/cpu.h> |
| #include <asm/gpio.h> |
| #include <asm/io.h> |
| #include <asm/pci.h> |
| #include <asm/arch/gpio.h> |
| #include <dt-bindings/gpio/x86-gpio.h> |
| #include <dm/pinctrl.h> |
| #include <dm/uclass-internal.h> |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| enum { |
| MAX_GPIOS = 95, |
| }; |
| |
| #define PIRQ_SHIFT 16 |
| #define CONF_MASK 0xffff |
| |
| struct pin_info { |
| int node; |
| int phandle; |
| bool mode_gpio; |
| bool dir_input; |
| bool invert; |
| bool trigger_level; |
| bool output_high; |
| bool sense_disable; |
| bool owner_gpio; |
| bool route_smi; |
| bool irq_enable; |
| bool reset_rsmrst; |
| bool pirq_apic_route; |
| }; |
| |
| static int broadwell_pinctrl_read_configs(struct udevice *dev, |
| struct pin_info *conf, int max_pins) |
| { |
| const void *blob = gd->fdt_blob; |
| int count = 0; |
| int node; |
| |
| debug("%s: starting\n", __func__); |
| for (node = fdt_first_subnode(blob, dev_of_offset(dev)); |
| node > 0; |
| node = fdt_next_subnode(blob, node)) { |
| int phandle = fdt_get_phandle(blob, node); |
| |
| if (!phandle) |
| continue; |
| if (count == max_pins) |
| return -ENOSPC; |
| |
| /* We've found a new configuration */ |
| memset(conf, '\0', sizeof(*conf)); |
| conf->node = node; |
| conf->phandle = phandle; |
| conf->mode_gpio = fdtdec_get_bool(blob, node, "mode-gpio"); |
| if (fdtdec_get_int(blob, node, "direction", -1) == PIN_INPUT) |
| conf->dir_input = true; |
| conf->invert = fdtdec_get_bool(blob, node, "invert"); |
| if (fdtdec_get_int(blob, node, "trigger", -1) == TRIGGER_LEVEL) |
| conf->trigger_level = true; |
| if (fdtdec_get_int(blob, node, "output-value", -1) == 1) |
| conf->output_high = true; |
| conf->sense_disable = fdtdec_get_bool(blob, node, |
| "sense-disable"); |
| if (fdtdec_get_int(blob, node, "owner", -1) == OWNER_GPIO) |
| conf->owner_gpio = true; |
| if (fdtdec_get_int(blob, node, "route", -1) == ROUTE_SMI) |
| conf->route_smi = true; |
| conf->irq_enable = fdtdec_get_bool(blob, node, "irq-enable"); |
| conf->reset_rsmrst = fdtdec_get_bool(blob, node, |
| "reset-rsmrst"); |
| if (fdtdec_get_int(blob, node, "pirq-apic", -1) == |
| PIRQ_APIC_ROUTE) |
| conf->pirq_apic_route = true; |
| debug("config: phandle=%d\n", phandle); |
| count++; |
| conf++; |
| } |
| debug("%s: Found %d configurations\n", __func__, count); |
| |
| return count; |
| } |
| |
| static int broadwell_pinctrl_lookup_phandle(struct pin_info *conf, |
| int conf_count, int phandle) |
| { |
| int i; |
| |
| for (i = 0; i < conf_count; i++) { |
| if (conf[i].phandle == phandle) |
| return i; |
| } |
| |
| return -ENOENT; |
| } |
| |
| static int broadwell_pinctrl_read_pins(struct udevice *dev, |
| struct pin_info *conf, int conf_count, int gpio_conf[], |
| int num_gpios) |
| { |
| const void *blob = gd->fdt_blob; |
| int count = 0; |
| int node; |
| |
| for (node = fdt_first_subnode(blob, dev_of_offset(dev)); |
| node > 0; |
| node = fdt_next_subnode(blob, node)) { |
| int len, i; |
| const u32 *prop = fdt_getprop(blob, node, "config", &len); |
| |
| if (!prop) |
| continue; |
| |
| /* There are three cells per pin */ |
| count = len / (sizeof(u32) * 3); |
| debug("Found %d GPIOs to configure\n", count); |
| for (i = 0; i < count; i++) { |
| uint gpio = fdt32_to_cpu(prop[i * 3]); |
| uint phandle = fdt32_to_cpu(prop[i * 3 + 1]); |
| int val; |
| |
| if (gpio >= num_gpios) { |
| debug("%s: GPIO %d out of range\n", __func__, |
| gpio); |
| return -EDOM; |
| } |
| val = broadwell_pinctrl_lookup_phandle(conf, conf_count, |
| phandle); |
| if (val < 0) { |
| debug("%s: Cannot find phandle %d\n", __func__, |
| phandle); |
| return -EINVAL; |
| } |
| gpio_conf[gpio] = val | |
| fdt32_to_cpu(prop[i * 3 + 2]) << PIRQ_SHIFT; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static void broadwell_pinctrl_commit(struct pch_lp_gpio_regs *regs, |
| struct pin_info *pin_info, |
| int gpio_conf[], int count) |
| { |
| u32 owner_gpio[GPIO_BANKS] = {0}; |
| u32 route_smi[GPIO_BANKS] = {0}; |
| u32 irq_enable[GPIO_BANKS] = {0}; |
| u32 reset_rsmrst[GPIO_BANKS] = {0}; |
| u32 pirq2apic = 0; |
| int set, bit, gpio = 0; |
| |
| for (gpio = 0; gpio < MAX_GPIOS; gpio++) { |
| int confnum = gpio_conf[gpio] & CONF_MASK; |
| struct pin_info *pin = &pin_info[confnum]; |
| u32 val; |
| |
| val = pin->mode_gpio << CONFA_MODE_SHIFT | |
| pin->dir_input << CONFA_DIR_SHIFT | |
| pin->invert << CONFA_INVERT_SHIFT | |
| pin->trigger_level << CONFA_TRIGGER_SHIFT | |
| pin->output_high << CONFA_OUTPUT_SHIFT; |
| outl(val, ®s->config[gpio].conf_a); |
| outl(pin->sense_disable << CONFB_SENSE_SHIFT, |
| ®s->config[gpio].conf_b); |
| |
| /* Determine set and bit based on GPIO number */ |
| set = gpio / GPIO_PER_BANK; |
| bit = gpio % GPIO_PER_BANK; |
| |
| /* Apply settings to set specific bits */ |
| owner_gpio[set] |= pin->owner_gpio << bit; |
| route_smi[set] |= pin->route_smi << bit; |
| irq_enable[set] |= pin->irq_enable << bit; |
| reset_rsmrst[set] |= pin->reset_rsmrst << bit; |
| |
| /* PIRQ to IO-APIC map */ |
| if (pin->pirq_apic_route) |
| pirq2apic |= gpio_conf[gpio] >> PIRQ_SHIFT; |
| debug("gpio %d: conf %d, mode_gpio %d, dir_input %d, output_high %d\n", |
| gpio, confnum, pin->mode_gpio, pin->dir_input, |
| pin->output_high); |
| } |
| |
| for (set = 0; set < GPIO_BANKS; set++) { |
| outl(owner_gpio[set], ®s->own[set]); |
| outl(route_smi[set], ®s->gpi_route[set]); |
| outl(irq_enable[set], ®s->gpi_ie[set]); |
| outl(reset_rsmrst[set], ®s->rst_sel[set]); |
| } |
| |
| outl(pirq2apic, ®s->pirq_to_ioxapic); |
| } |
| |
| static int broadwell_pinctrl_probe(struct udevice *dev) |
| { |
| struct pch_lp_gpio_regs *regs; |
| struct pin_info conf[12]; |
| int gpio_conf[MAX_GPIOS]; |
| struct udevice *pch; |
| int conf_count; |
| u32 gpiobase; |
| int ret; |
| |
| ret = uclass_find_first_device(UCLASS_PCH, &pch); |
| if (ret) |
| return ret; |
| if (!pch) |
| return -ENODEV; |
| debug("%s: start\n", __func__); |
| |
| /* Only init once, before relocation */ |
| if (gd->flags & GD_FLG_RELOC) |
| return 0; |
| |
| /* |
| * Get the memory/io base address to configure every pins. |
| * IOBASE is used to configure the mode/pads |
| * GPIOBASE is used to configure the direction and default value |
| */ |
| ret = pch_get_gpio_base(pch, &gpiobase); |
| if (ret) { |
| debug("%s: invalid GPIOBASE address (%08x)\n", __func__, |
| gpiobase); |
| return -EINVAL; |
| } |
| |
| conf_count = broadwell_pinctrl_read_configs(dev, conf, |
| ARRAY_SIZE(conf)); |
| if (conf_count < 0) { |
| debug("%s: Cannot read configs: err=%d\n", __func__, ret); |
| return conf_count; |
| } |
| |
| /* |
| * Assume that pin settings are provided for every pin. Pins not |
| * mentioned will get the first config mentioned in the list. |
| */ |
| ret = broadwell_pinctrl_read_pins(dev, conf, conf_count, gpio_conf, |
| MAX_GPIOS); |
| if (ret) { |
| debug("%s: Cannot read pin settings: err=%d\n", __func__, ret); |
| return ret; |
| } |
| |
| regs = (struct pch_lp_gpio_regs *)gpiobase; |
| broadwell_pinctrl_commit(regs, conf, gpio_conf, ARRAY_SIZE(conf)); |
| |
| debug("%s: done\n", __func__); |
| |
| return 0; |
| } |
| |
| static const struct udevice_id broadwell_pinctrl_match[] = { |
| { .compatible = "intel,x86-broadwell-pinctrl", |
| .data = X86_SYSCON_PINCONF }, |
| { /* sentinel */ } |
| }; |
| |
| U_BOOT_DRIVER(broadwell_pinctrl) = { |
| .name = "broadwell_pinctrl", |
| .id = UCLASS_SYSCON, |
| .of_match = broadwell_pinctrl_match, |
| .probe = broadwell_pinctrl_probe, |
| }; |