| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright (C) 2004-2007, 2012 Freescale Semiconductor, Inc. |
| * TsiChung Liew (Tsi-Chung.Liew@freescale.com) |
| */ |
| |
| /* |
| * PCI Configuration space access support |
| */ |
| #include <common.h> |
| #include <pci.h> |
| #include <asm/io.h> |
| #include <asm/immap.h> |
| |
| #if defined(CONFIG_PCI) |
| /* System RAM mapped over PCI */ |
| #define CONFIG_SYS_PCI_SYS_MEM_BUS CONFIG_SYS_SDRAM_BASE |
| #define CONFIG_SYS_PCI_SYS_MEM_PHYS CONFIG_SYS_SDRAM_BASE |
| #define CONFIG_SYS_PCI_SYS_MEM_SIZE (1024 * 1024 * 1024) |
| |
| #define cfg_read(val, addr, type, op) *val = op((type)(addr)); |
| #define cfg_write(val, addr, type, op) op((type *)(addr), (val)); |
| |
| #define PCI_OP(rw, size, type, op, mask) \ |
| int pci_##rw##_cfg_##size(struct pci_controller *hose, \ |
| pci_dev_t dev, int offset, type val) \ |
| { \ |
| u32 addr = 0; \ |
| u16 cfg_type = 0; \ |
| addr = ((offset & 0xfc) | cfg_type | (dev) | 0x80000000); \ |
| out_be32(hose->cfg_addr, addr); \ |
| cfg_##rw(val, hose->cfg_data + (offset & mask), type, op); \ |
| out_be32(hose->cfg_addr, addr & 0x7fffffff); \ |
| return 0; \ |
| } |
| |
| PCI_OP(read, byte, u8 *, in_8, 3) |
| PCI_OP(read, word, u16 *, in_le16, 2) |
| PCI_OP(read, dword, u32 *, in_le32, 0) |
| PCI_OP(write, byte, u8, out_8, 3) |
| PCI_OP(write, word, u16, out_le16, 2) |
| PCI_OP(write, dword, u32, out_le32, 0) |
| |
| void pci_mcf5445x_init(struct pci_controller *hose) |
| { |
| pci_t *pci = (pci_t *)MMAP_PCI; |
| pciarb_t *pciarb = (pciarb_t *)MMAP_PCIARB; |
| gpio_t *gpio = (gpio_t *) MMAP_GPIO; |
| u32 barEn = 0; |
| |
| out_be32(&pciarb->acr, 0x001f001f); |
| |
| /* Set PCIGNT1, PCIREQ1, PCIREQ0/PCIGNTIN, PCIGNT0/PCIREQOUT, |
| PCIREQ2, PCIGNT2 */ |
| out_be16(&gpio->par_pci, |
| GPIO_PAR_PCI_GNT3_GNT3 | GPIO_PAR_PCI_GNT2 | |
| GPIO_PAR_PCI_GNT1 | GPIO_PAR_PCI_GNT0 | |
| GPIO_PAR_PCI_REQ3_REQ3 | GPIO_PAR_PCI_REQ2 | |
| GPIO_PAR_PCI_REQ1 | GPIO_PAR_PCI_REQ0); |
| |
| /* Assert reset bit */ |
| setbits_be32(&pci->gscr, PCI_GSCR_PR); |
| |
| setbits_be32(&pci->tcr1, PCI_TCR1_P); |
| |
| /* Initiator windows */ |
| out_be32(&pci->iw0btar, |
| CONFIG_SYS_PCI_MEM_PHYS | (CONFIG_SYS_PCI_MEM_PHYS >> 16)); |
| out_be32(&pci->iw1btar, |
| CONFIG_SYS_PCI_IO_PHYS | (CONFIG_SYS_PCI_IO_PHYS >> 16)); |
| out_be32(&pci->iw2btar, |
| CONFIG_SYS_PCI_CFG_PHYS | (CONFIG_SYS_PCI_CFG_PHYS >> 16)); |
| |
| out_be32(&pci->iwcr, |
| PCI_IWCR_W0C_EN | PCI_IWCR_W1C_EN | PCI_IWCR_W1C_IO | |
| PCI_IWCR_W2C_EN | PCI_IWCR_W2C_IO); |
| |
| out_be32(&pci->icr, 0); |
| |
| /* Enable bus master and mem access */ |
| out_be32(&pci->scr, PCI_SCR_B | PCI_SCR_M); |
| |
| /* Cache line size and master latency */ |
| out_be32(&pci->cr1, PCI_CR1_CLS(8) | PCI_CR1_LTMR(0xF8)); |
| out_be32(&pci->cr2, 0); |
| |
| #ifdef CONFIG_SYS_PCI_BAR0 |
| out_be32(&pci->bar0, PCI_BAR_BAR0(CONFIG_SYS_PCI_BAR0)); |
| out_be32(&pci->tbatr0, CONFIG_SYS_PCI_TBATR0 | PCI_TBATR_EN); |
| barEn |= PCI_TCR2_B0E; |
| #endif |
| #ifdef CONFIG_SYS_PCI_BAR1 |
| out_be32(&pci->bar1, PCI_BAR_BAR1(CONFIG_SYS_PCI_BAR1)); |
| out_be32(&pci->tbatr1, CONFIG_SYS_PCI_TBATR1 | PCI_TBATR_EN); |
| barEn |= PCI_TCR2_B1E; |
| #endif |
| #ifdef CONFIG_SYS_PCI_BAR2 |
| out_be32(&pci->bar2, PCI_BAR_BAR2(CONFIG_SYS_PCI_BAR2)); |
| out_be32(&pci->tbatr2, CONFIG_SYS_PCI_TBATR2 | PCI_TBATR_EN); |
| barEn |= PCI_TCR2_B2E; |
| #endif |
| #ifdef CONFIG_SYS_PCI_BAR3 |
| out_be32(&pci->bar3, PCI_BAR_BAR3(CONFIG_SYS_PCI_BAR3)); |
| out_be32(&pci->tbatr3, CONFIG_SYS_PCI_TBATR3 | PCI_TBATR_EN); |
| barEn |= PCI_TCR2_B3E; |
| #endif |
| #ifdef CONFIG_SYS_PCI_BAR4 |
| out_be32(&pci->bar4, PCI_BAR_BAR4(CONFIG_SYS_PCI_BAR4)); |
| out_be32(&pci->tbatr4, CONFIG_SYS_PCI_TBATR4 | PCI_TBATR_EN); |
| barEn |= PCI_TCR2_B4E; |
| #endif |
| #ifdef CONFIG_SYS_PCI_BAR5 |
| out_be32(&pci->bar5, PCI_BAR_BAR5(CONFIG_SYS_PCI_BAR5)); |
| out_be32(&pci->tbatr5, CONFIG_SYS_PCI_TBATR5 | PCI_TBATR_EN); |
| barEn |= PCI_TCR2_B5E; |
| #endif |
| |
| out_be32(&pci->tcr2, barEn); |
| |
| /* Deassert reset bit */ |
| clrbits_be32(&pci->gscr, PCI_GSCR_PR); |
| udelay(1000); |
| |
| /* Enable PCI bus master support */ |
| hose->first_busno = 0; |
| hose->last_busno = 0xff; |
| |
| pci_set_region(hose->regions + 0, CONFIG_SYS_PCI_MEM_BUS, CONFIG_SYS_PCI_MEM_PHYS, |
| CONFIG_SYS_PCI_MEM_SIZE, PCI_REGION_MEM); |
| |
| pci_set_region(hose->regions + 1, CONFIG_SYS_PCI_IO_BUS, CONFIG_SYS_PCI_IO_PHYS, |
| CONFIG_SYS_PCI_IO_SIZE, PCI_REGION_IO); |
| |
| pci_set_region(hose->regions + 2, CONFIG_SYS_PCI_SYS_MEM_BUS, |
| CONFIG_SYS_PCI_SYS_MEM_PHYS, CONFIG_SYS_PCI_SYS_MEM_SIZE, |
| PCI_REGION_MEM | PCI_REGION_SYS_MEMORY); |
| |
| hose->region_count = 3; |
| |
| hose->cfg_addr = &(pci->car); |
| hose->cfg_data = (volatile unsigned char *)CONFIG_SYS_PCI_CFG_BUS; |
| |
| pci_set_ops(hose, pci_read_cfg_byte, pci_read_cfg_word, |
| pci_read_cfg_dword, pci_write_cfg_byte, pci_write_cfg_word, |
| pci_write_cfg_dword); |
| |
| /* Hose scan */ |
| pci_register_hose(hose); |
| hose->last_busno = pci_hose_scan(hose); |
| } |
| #endif /* CONFIG_PCI */ |