| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * sun4i, sun5i and sun7i specific clock code |
| * |
| * (C) Copyright 2007-2012 |
| * Allwinner Technology Co., Ltd. <www.allwinnertech.com> |
| * Tom Cubie <tangliang@allwinnertech.com> |
| * |
| * (C) Copyright 2013 Luke Kenneth Casson Leighton <lkcl@lkcl.net> |
| */ |
| |
| #include <common.h> |
| #include <asm/io.h> |
| #include <asm/arch/clock.h> |
| #include <asm/arch/gpio.h> |
| #include <asm/arch/sys_proto.h> |
| |
| #ifdef CONFIG_SPL_BUILD |
| void clock_init_safe(void) |
| { |
| struct sunxi_ccm_reg * const ccm = |
| (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; |
| |
| /* Set safe defaults until PMU is configured */ |
| writel(AXI_DIV_1 << AXI_DIV_SHIFT | |
| AHB_DIV_2 << AHB_DIV_SHIFT | |
| APB0_DIV_1 << APB0_DIV_SHIFT | |
| CPU_CLK_SRC_OSC24M << CPU_CLK_SRC_SHIFT, |
| &ccm->cpu_ahb_apb0_cfg); |
| writel(PLL1_CFG_DEFAULT, &ccm->pll1_cfg); |
| sdelay(200); |
| writel(AXI_DIV_1 << AXI_DIV_SHIFT | |
| AHB_DIV_2 << AHB_DIV_SHIFT | |
| APB0_DIV_1 << APB0_DIV_SHIFT | |
| CPU_CLK_SRC_PLL1 << CPU_CLK_SRC_SHIFT, |
| &ccm->cpu_ahb_apb0_cfg); |
| #ifdef CONFIG_MACH_SUN7I |
| setbits_le32(&ccm->ahb_gate0, 0x1 << AHB_GATE_OFFSET_DMA); |
| #endif |
| writel(PLL6_CFG_DEFAULT, &ccm->pll6_cfg); |
| #ifdef CONFIG_SUNXI_AHCI |
| setbits_le32(&ccm->ahb_gate0, 0x1 << AHB_GATE_OFFSET_SATA); |
| setbits_le32(&ccm->pll6_cfg, 0x1 << CCM_PLL6_CTRL_SATA_EN_SHIFT); |
| #endif |
| } |
| #endif |
| |
| void clock_init_uart(void) |
| { |
| struct sunxi_ccm_reg *const ccm = |
| (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; |
| |
| /* uart clock source is apb1 */ |
| writel(APB1_CLK_SRC_OSC24M| |
| APB1_CLK_RATE_N_1| |
| APB1_CLK_RATE_M(1), |
| &ccm->apb1_clk_div_cfg); |
| |
| /* open the clock for uart */ |
| setbits_le32(&ccm->apb1_gate, |
| CLK_GATE_OPEN << (APB1_GATE_UART_SHIFT+CONFIG_CONS_INDEX - 1)); |
| } |
| |
| int clock_twi_onoff(int port, int state) |
| { |
| struct sunxi_ccm_reg *const ccm = |
| (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; |
| |
| /* set the apb clock gate for twi */ |
| if (state) |
| setbits_le32(&ccm->apb1_gate, |
| CLK_GATE_OPEN << (APB1_GATE_TWI_SHIFT + port)); |
| else |
| clrbits_le32(&ccm->apb1_gate, |
| CLK_GATE_OPEN << (APB1_GATE_TWI_SHIFT + port)); |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_SPL_BUILD |
| #define PLL1_CFG(N, K, M, P) ( 1 << CCM_PLL1_CFG_ENABLE_SHIFT | \ |
| 0 << CCM_PLL1_CFG_VCO_RST_SHIFT | \ |
| 8 << CCM_PLL1_CFG_VCO_BIAS_SHIFT | \ |
| 0 << CCM_PLL1_CFG_PLL4_EXCH_SHIFT | \ |
| 16 << CCM_PLL1_CFG_BIAS_CUR_SHIFT | \ |
| (P)<< CCM_PLL1_CFG_DIVP_SHIFT | \ |
| 2 << CCM_PLL1_CFG_LCK_TMR_SHIFT | \ |
| (N)<< CCM_PLL1_CFG_FACTOR_N_SHIFT | \ |
| (K)<< CCM_PLL1_CFG_FACTOR_K_SHIFT | \ |
| 0 << CCM_PLL1_CFG_SIG_DELT_PAT_IN_SHIFT | \ |
| 0 << CCM_PLL1_CFG_SIG_DELT_PAT_EN_SHIFT | \ |
| (M)<< CCM_PLL1_CFG_FACTOR_M_SHIFT) |
| |
| static struct { |
| u32 pll1_cfg; |
| unsigned int freq; |
| } pll1_para[] = { |
| /* This array must be ordered by frequency. */ |
| { PLL1_CFG(31, 1, 0, 0), 1488000000}, |
| { PLL1_CFG(30, 1, 0, 0), 1440000000}, |
| { PLL1_CFG(29, 1, 0, 0), 1392000000}, |
| { PLL1_CFG(28, 1, 0, 0), 1344000000}, |
| { PLL1_CFG(27, 1, 0, 0), 1296000000}, |
| { PLL1_CFG(26, 1, 0, 0), 1248000000}, |
| { PLL1_CFG(25, 1, 0, 0), 1200000000}, |
| { PLL1_CFG(24, 1, 0, 0), 1152000000}, |
| { PLL1_CFG(23, 1, 0, 0), 1104000000}, |
| { PLL1_CFG(22, 1, 0, 0), 1056000000}, |
| { PLL1_CFG(21, 1, 0, 0), 1008000000}, |
| { PLL1_CFG(20, 1, 0, 0), 960000000 }, |
| { PLL1_CFG(19, 1, 0, 0), 912000000 }, |
| { PLL1_CFG(16, 1, 0, 0), 768000000 }, |
| /* Final catchall entry 384MHz*/ |
| { PLL1_CFG(16, 0, 0, 0), 0 }, |
| |
| }; |
| |
| void clock_set_pll1(unsigned int hz) |
| { |
| int i = 0; |
| int axi, ahb, apb0; |
| struct sunxi_ccm_reg * const ccm = |
| (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; |
| |
| /* Find target frequency */ |
| while (pll1_para[i].freq > hz) |
| i++; |
| |
| hz = pll1_para[i].freq; |
| if (! hz) |
| hz = 384000000; |
| |
| /* Calculate system clock divisors */ |
| axi = DIV_ROUND_UP(hz, 432000000); /* Max 450MHz */ |
| ahb = DIV_ROUND_UP(hz/axi, 204000000); /* Max 250MHz */ |
| apb0 = 2; /* Max 150MHz */ |
| |
| printf("CPU: %uHz, AXI/AHB/APB: %d/%d/%d\n", hz, axi, ahb, apb0); |
| |
| /* Map divisors to register values */ |
| axi = axi - 1; |
| if (ahb > 4) |
| ahb = 3; |
| else if (ahb > 2) |
| ahb = 2; |
| else if (ahb > 1) |
| ahb = 1; |
| else |
| ahb = 0; |
| |
| apb0 = apb0 - 1; |
| |
| /* Switch to 24MHz clock while changing PLL1 */ |
| writel(AXI_DIV_1 << AXI_DIV_SHIFT | |
| AHB_DIV_2 << AHB_DIV_SHIFT | |
| APB0_DIV_1 << APB0_DIV_SHIFT | |
| CPU_CLK_SRC_OSC24M << CPU_CLK_SRC_SHIFT, |
| &ccm->cpu_ahb_apb0_cfg); |
| sdelay(20); |
| |
| /* Configure sys clock divisors */ |
| writel(axi << AXI_DIV_SHIFT | |
| ahb << AHB_DIV_SHIFT | |
| apb0 << APB0_DIV_SHIFT | |
| CPU_CLK_SRC_OSC24M << CPU_CLK_SRC_SHIFT, |
| &ccm->cpu_ahb_apb0_cfg); |
| |
| /* Configure PLL1 at the desired frequency */ |
| writel(pll1_para[i].pll1_cfg, &ccm->pll1_cfg); |
| sdelay(200); |
| |
| /* Switch CPU to PLL1 */ |
| writel(axi << AXI_DIV_SHIFT | |
| ahb << AHB_DIV_SHIFT | |
| apb0 << APB0_DIV_SHIFT | |
| CPU_CLK_SRC_PLL1 << CPU_CLK_SRC_SHIFT, |
| &ccm->cpu_ahb_apb0_cfg); |
| sdelay(20); |
| } |
| #endif |
| |
| void clock_set_pll3(unsigned int clk) |
| { |
| struct sunxi_ccm_reg * const ccm = |
| (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; |
| |
| if (clk == 0) { |
| clrbits_le32(&ccm->pll3_cfg, CCM_PLL3_CTRL_EN); |
| return; |
| } |
| |
| /* PLL3 rate = 3000000 * m */ |
| writel(CCM_PLL3_CTRL_EN | CCM_PLL3_CTRL_INTEGER_MODE | |
| CCM_PLL3_CTRL_M(clk / 3000000), &ccm->pll3_cfg); |
| } |
| |
| unsigned int clock_get_pll3(void) |
| { |
| struct sunxi_ccm_reg *const ccm = |
| (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; |
| uint32_t rval = readl(&ccm->pll3_cfg); |
| int m = ((rval & CCM_PLL3_CTRL_M_MASK) >> CCM_PLL3_CTRL_M_SHIFT); |
| return 3000000 * m; |
| } |
| |
| unsigned int clock_get_pll5p(void) |
| { |
| struct sunxi_ccm_reg *const ccm = |
| (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; |
| uint32_t rval = readl(&ccm->pll5_cfg); |
| int n = ((rval & CCM_PLL5_CTRL_N_MASK) >> CCM_PLL5_CTRL_N_SHIFT); |
| int k = ((rval & CCM_PLL5_CTRL_K_MASK) >> CCM_PLL5_CTRL_K_SHIFT) + 1; |
| int p = ((rval & CCM_PLL5_CTRL_P_MASK) >> CCM_PLL5_CTRL_P_SHIFT); |
| return (24000000 * n * k) >> p; |
| } |
| |
| unsigned int clock_get_pll6(void) |
| { |
| struct sunxi_ccm_reg *const ccm = |
| (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; |
| uint32_t rval = readl(&ccm->pll6_cfg); |
| int n = ((rval & CCM_PLL6_CTRL_N_MASK) >> CCM_PLL6_CTRL_N_SHIFT); |
| int k = ((rval & CCM_PLL6_CTRL_K_MASK) >> CCM_PLL6_CTRL_K_SHIFT) + 1; |
| return 24000000 * n * k / 2; |
| } |
| |
| void clock_set_de_mod_clock(u32 *clk_cfg, unsigned int hz) |
| { |
| int pll = clock_get_pll5p(); |
| int div = 1; |
| |
| while ((pll / div) > hz) |
| div++; |
| |
| writel(CCM_DE_CTRL_GATE | CCM_DE_CTRL_RST | CCM_DE_CTRL_PLL5P | |
| CCM_DE_CTRL_M(div), clk_cfg); |
| } |