arch/arm/mach-stm32mp/cpu.c - u-boot-mtk - Git at Google

 // SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
 /*
  * Copyright (C) 2018, STMicroelectronics - All Rights Reserved
  */
 #include <common.h>
 #include <clk.h>
 #include <debug_uart.h>
 #include <env.h>
 #include <misc.h>
 #include <asm/io.h>
 #include <asm/arch/stm32.h>
 #include <asm/arch/sys_proto.h>
 #include <dm/device.h>
 #include <dm/uclass.h>

 /* RCC register */
 #define RCC_TZCR		(STM32_RCC_BASE + 0x00)
 #define RCC_DBGCFGR		(STM32_RCC_BASE + 0x080C)
 #define RCC_BDCR		(STM32_RCC_BASE + 0x0140)
 #define RCC_MP_APB5ENSETR	(STM32_RCC_BASE + 0x0208)
 #define RCC_MP_AHB5ENSETR	(STM32_RCC_BASE + 0x0210)
 #define RCC_BDCR_VSWRST		BIT(31)
 #define RCC_BDCR_RTCSRC		GENMASK(17, 16)
 #define RCC_DBGCFGR_DBGCKEN	BIT(8)

 /* Security register */
 #define ETZPC_TZMA1_SIZE	(STM32_ETZPC_BASE + 0x04)
 #define ETZPC_DECPROT0		(STM32_ETZPC_BASE + 0x10)

 #define TZC_GATE_KEEPER		(STM32_TZC_BASE + 0x008)
 #define TZC_REGION_ATTRIBUTE0	(STM32_TZC_BASE + 0x110)
 #define TZC_REGION_ID_ACCESS0	(STM32_TZC_BASE + 0x114)

 #define TAMP_CR1		(STM32_TAMP_BASE + 0x00)

 #define PWR_CR1			(STM32_PWR_BASE + 0x00)
 #define PWR_CR1_DBP		BIT(8)

 /* DBGMCU register */
 #define DBGMCU_IDC		(STM32_DBGMCU_BASE + 0x00)
 #define DBGMCU_APB4FZ1		(STM32_DBGMCU_BASE + 0x2C)
 #define DBGMCU_APB4FZ1_IWDG2	BIT(2)
 #define DBGMCU_IDC_DEV_ID_MASK	GENMASK(11, 0)
 #define DBGMCU_IDC_DEV_ID_SHIFT	0
 #define DBGMCU_IDC_REV_ID_MASK	GENMASK(31, 16)
 #define DBGMCU_IDC_REV_ID_SHIFT	16

 /* GPIOZ registers */
 #define GPIOZ_SECCFGR		0x54004030

 /* boot interface from Bootrom
  * - boot instance = bit 31:16
  * - boot device = bit 15:0
  */
 #define BOOTROM_PARAM_ADDR	0x2FFC0078
 #define BOOTROM_MODE_MASK	GENMASK(15, 0)
 #define BOOTROM_MODE_SHIFT	0
 #define BOOTROM_INSTANCE_MASK	 GENMASK(31, 16)
 #define BOOTROM_INSTANCE_SHIFT	16

 /* BSEC OTP index */
 #define BSEC_OTP_RPN	1
 #define BSEC_OTP_SERIAL	13
 #define BSEC_OTP_PKG	16
 #define BSEC_OTP_MAC	57

 /* Device Part Number (RPN) = OTP_DATA1 lower 8 bits */
 #define RPN_SHIFT	0
 #define RPN_MASK	GENMASK(7, 0)

 /* Package = bit 27:29 of OTP16
  * - 100: LBGA448 (FFI) => AA = LFBGA 18x18mm 448 balls p. 0.8mm
  * - 011: LBGA354 (LCI) => AB = LFBGA 16x16mm 359 balls p. 0.8mm
  * - 010: TFBGA361 (FFC) => AC = TFBGA 12x12mm 361 balls p. 0.5mm
  * - 001: TFBGA257 (LCC) => AD = TFBGA 10x10mm 257 balls p. 0.5mm
  * - others: Reserved
  */
 #define PKG_SHIFT	27
 #define PKG_MASK	GENMASK(2, 0)

 #if !defined(CONFIG_SPL) || defined(CONFIG_SPL_BUILD)
 #ifndef CONFIG_STM32MP1_TRUSTED
 static void security_init(void)
 {
 	/* Disable the backup domain write protection */
 	/* the protection is enable at each reset by hardware */
 	/* And must be disable by software */
 	setbits_le32(PWR_CR1, PWR_CR1_DBP);

 	while (!(readl(PWR_CR1) & PWR_CR1_DBP))
 		;

 	/* If RTC clock isn't enable so this is a cold boot then we need
 	 * to reset the backup domain
 	 */
 	if (!(readl(RCC_BDCR) & RCC_BDCR_RTCSRC)) {
 		setbits_le32(RCC_BDCR, RCC_BDCR_VSWRST);
 		while (!(readl(RCC_BDCR) & RCC_BDCR_VSWRST))
 			;
 		clrbits_le32(RCC_BDCR, RCC_BDCR_VSWRST);
 	}

 	/* allow non secure access in Write/Read for all peripheral */
 	writel(GENMASK(25, 0), ETZPC_DECPROT0);

 	/* Open SYSRAM for no secure access */
 	writel(0x0, ETZPC_TZMA1_SIZE);

 	/* enable TZC1 TZC2 clock */
 	writel(BIT(11) | BIT(12), RCC_MP_APB5ENSETR);

 	/* Region 0 set to no access by default */
 	/* bit 0 / 16 => nsaid0 read/write Enable
 	 * bit 1 / 17 => nsaid1 read/write Enable
 	 * ...
 	 * bit 15 / 31 => nsaid15 read/write Enable
 	 */
 	writel(0xFFFFFFFF, TZC_REGION_ID_ACCESS0);
 	/* bit 30 / 31 => Secure Global Enable : write/read */
 	/* bit 0 / 1 => Region Enable for filter 0/1 */
 	writel(BIT(0) | BIT(1) | BIT(30) | BIT(31), TZC_REGION_ATTRIBUTE0);

 	/* Enable Filter 0 and 1 */
 	setbits_le32(TZC_GATE_KEEPER, BIT(0) | BIT(1));

 	/* RCC trust zone deactivated */
 	writel(0x0, RCC_TZCR);

 	/* TAMP: deactivate the internal tamper
 	 * Bit 23 ITAMP8E: monotonic counter overflow
 	 * Bit 20 ITAMP5E: RTC calendar overflow
 	 * Bit 19 ITAMP4E: HSE monitoring
 	 * Bit 18 ITAMP3E: LSE monitoring
 	 * Bit 16 ITAMP1E: RTC power domain supply monitoring
 	 */
 	writel(0x0, TAMP_CR1);

 	/* GPIOZ: deactivate the security */
 	writel(BIT(0), RCC_MP_AHB5ENSETR);
 	writel(0x0, GPIOZ_SECCFGR);
 }
 #endif /* CONFIG_STM32MP1_TRUSTED */

 /*
  * Debug init
  */
 static void dbgmcu_init(void)
 {
 	setbits_le32(RCC_DBGCFGR, RCC_DBGCFGR_DBGCKEN);

 	/* Freeze IWDG2 if Cortex-A7 is in debug mode */
 	setbits_le32(DBGMCU_APB4FZ1, DBGMCU_APB4FZ1_IWDG2);
 }
 #endif /* !defined(CONFIG_SPL) || defined(CONFIG_SPL_BUILD) */

 #if !defined(CONFIG_STM32MP1_TRUSTED) && \
 	(!defined(CONFIG_SPL) || defined(CONFIG_SPL_BUILD))
 /* get bootmode from ROM code boot context: saved in TAMP register */
 static void update_bootmode(void)
 {
 	u32 boot_mode;
 	u32 bootrom_itf = readl(BOOTROM_PARAM_ADDR);
 	u32 bootrom_device, bootrom_instance;

 	/* enable TAMP clock = RTCAPBEN */
 	writel(BIT(8), RCC_MP_APB5ENSETR);

 	/* read bootrom context */
 	bootrom_device =
 		(bootrom_itf & BOOTROM_MODE_MASK) >> BOOTROM_MODE_SHIFT;
 	bootrom_instance =
 		(bootrom_itf & BOOTROM_INSTANCE_MASK) >> BOOTROM_INSTANCE_SHIFT;
 	boot_mode =
 		((bootrom_device << BOOT_TYPE_SHIFT) & BOOT_TYPE_MASK) |
 		((bootrom_instance << BOOT_INSTANCE_SHIFT) &
 		 BOOT_INSTANCE_MASK);

 	/* save the boot mode in TAMP backup register */
 	clrsetbits_le32(TAMP_BOOT_CONTEXT,
 			TAMP_BOOT_MODE_MASK,
 			boot_mode << TAMP_BOOT_MODE_SHIFT);
 }
 #endif

 u32 get_bootmode(void)
 {
 	/* read bootmode from TAMP backup register */
 	return (readl(TAMP_BOOT_CONTEXT) & TAMP_BOOT_MODE_MASK) >>
 		    TAMP_BOOT_MODE_SHIFT;
 }

 /*
  * Early system init
  */
 int arch_cpu_init(void)
 {
 	u32 boot_mode;

 	/* early armv7 timer init: needed for polling */
 	timer_init();

 #if !defined(CONFIG_SPL) || defined(CONFIG_SPL_BUILD)
 	dbgmcu_init();
 #ifndef CONFIG_STM32MP1_TRUSTED
 	security_init();
 	update_bootmode();
 #endif
 #endif

 	boot_mode = get_bootmode();

 	if ((boot_mode & TAMP_BOOT_DEVICE_MASK) == BOOT_SERIAL_UART)
 		gd->flags |= GD_FLG_SILENT | GD_FLG_DISABLE_CONSOLE;
 #if defined(CONFIG_DEBUG_UART) && \
 	!defined(CONFIG_STM32MP1_TRUSTED) && \
 	(!defined(CONFIG_SPL) || defined(CONFIG_SPL_BUILD))
 	else
 		debug_uart_init();
 #endif

 	return 0;
 }

 void enable_caches(void)
 {
 	/* Enable D-cache. I-cache is already enabled in start.S */
 	dcache_enable();
 }

 static u32 read_idc(void)
 {
 	setbits_le32(RCC_DBGCFGR, RCC_DBGCFGR_DBGCKEN);

 	return readl(DBGMCU_IDC);
 }

 u32 get_cpu_rev(void)
 {
 	return (read_idc() & DBGMCU_IDC_REV_ID_MASK) >> DBGMCU_IDC_REV_ID_SHIFT;
 }

 static u32 get_otp(int index, int shift, int mask)
 {
 	int ret;
 	struct udevice *dev;
 	u32 otp = 0;

 	ret = uclass_get_device_by_driver(UCLASS_MISC,
 					  DM_GET_DRIVER(stm32mp_bsec),
 					  &dev);

 	if (!ret)
 		ret = misc_read(dev, STM32_BSEC_SHADOW(index),
 				&otp, sizeof(otp));

 	return (otp >> shift) & mask;
 }

 /* Get Device Part Number (RPN) from OTP */
 static u32 get_cpu_rpn(void)
 {
 	return get_otp(BSEC_OTP_RPN, RPN_SHIFT, RPN_MASK);
 }

 u32 get_cpu_type(void)
 {
 	u32 id;

 	id = (read_idc() & DBGMCU_IDC_DEV_ID_MASK) >> DBGMCU_IDC_DEV_ID_SHIFT;

 	return (id << 16) | get_cpu_rpn();
 }

 /* Get Package options from OTP */
 u32 get_cpu_package(void)
 {
 	return get_otp(BSEC_OTP_PKG, PKG_SHIFT, PKG_MASK);
 }

 #if defined(CONFIG_DISPLAY_CPUINFO)
 int print_cpuinfo(void)
 {
 	char *cpu_s, *cpu_r, *pkg;

 	/* MPUs Part Numbers */
 	switch (get_cpu_type()) {
 	case CPU_STM32MP157Cxx:
 		cpu_s = "157C";
 		break;
 	case CPU_STM32MP157Axx:
 		cpu_s = "157A";
 		break;
 	case CPU_STM32MP153Cxx:
 		cpu_s = "153C";
 		break;
 	case CPU_STM32MP153Axx:
 		cpu_s = "153A";
 		break;
 	case CPU_STM32MP151Cxx:
 		cpu_s = "151C";
 		break;
 	case CPU_STM32MP151Axx:
 		cpu_s = "151A";
 		break;
 	default:
 		cpu_s = "????";
 		break;
 	}

 	/* Package */
 	switch (get_cpu_package()) {
 	case PKG_AA_LBGA448:
 		pkg = "AA";
 		break;
 	case PKG_AB_LBGA354:
 		pkg = "AB";
 		break;
 	case PKG_AC_TFBGA361:
 		pkg = "AC";
 		break;
 	case PKG_AD_TFBGA257:
 		pkg = "AD";
 		break;
 	default:
 		pkg = "??";
 		break;
 	}

 	/* REVISION */
 	switch (get_cpu_rev()) {
 	case CPU_REVA:
 		cpu_r = "A";
 		break;
 	case CPU_REVB:
 		cpu_r = "B";
 		break;
 	default:
 		cpu_r = "?";
 		break;
 	}

 	printf("CPU: STM32MP%s%s Rev.%s\n", cpu_s, pkg, cpu_r);

 	return 0;
 }
 #endif /* CONFIG_DISPLAY_CPUINFO */

 static void setup_boot_mode(void)
 {
 	const u32 serial_addr[] = {
 		STM32_USART1_BASE,
 		STM32_USART2_BASE,
 		STM32_USART3_BASE,
 		STM32_UART4_BASE,
 		STM32_UART5_BASE,
 		STM32_USART6_BASE,
 		STM32_UART7_BASE,
 		STM32_UART8_BASE
 	};
 	char cmd[60];
 	u32 boot_ctx = readl(TAMP_BOOT_CONTEXT);
 	u32 boot_mode =
 		(boot_ctx & TAMP_BOOT_MODE_MASK) >> TAMP_BOOT_MODE_SHIFT;
 	unsigned int instance = (boot_mode & TAMP_BOOT_INSTANCE_MASK) - 1;
 	u32 forced_mode = (boot_ctx & TAMP_BOOT_FORCED_MASK);
 	struct udevice *dev;
 	int alias;

 	pr_debug("%s: boot_ctx=0x%x => boot_mode=%x, instance=%d forced=%x\n",
 		 __func__, boot_ctx, boot_mode, instance, forced_mode);
 	switch (boot_mode & TAMP_BOOT_DEVICE_MASK) {
 	case BOOT_SERIAL_UART:
 		if (instance > ARRAY_SIZE(serial_addr))
 			break;
 		/* serial : search associated alias in devicetree */
 		sprintf(cmd, "serial@%x", serial_addr[instance]);
 		if (uclass_get_device_by_name(UCLASS_SERIAL, cmd, &dev))
 			break;
 		if (fdtdec_get_alias_seq(gd->fdt_blob, "serial",
 					 dev_of_offset(dev), &alias))
 			break;
 		sprintf(cmd, "%d", alias);
 		env_set("boot_device", "serial");
 		env_set("boot_instance", cmd);

 		/* restore console on uart when not used */
 		if (gd->cur_serial_dev != dev) {
 			gd->flags &= ~(GD_FLG_SILENT |
 				       GD_FLG_DISABLE_CONSOLE);
 			printf("serial boot with console enabled!\n");
 		}
 		break;
 	case BOOT_SERIAL_USB:
 		env_set("boot_device", "usb");
 		env_set("boot_instance", "0");
 		break;
 	case BOOT_FLASH_SD:
 	case BOOT_FLASH_EMMC:
 		sprintf(cmd, "%d", instance);
 		env_set("boot_device", "mmc");
 		env_set("boot_instance", cmd);
 		break;
 	case BOOT_FLASH_NAND:
 		env_set("boot_device", "nand");
 		env_set("boot_instance", "0");
 		break;
 	case BOOT_FLASH_NOR:
 		env_set("boot_device", "nor");
 		env_set("boot_instance", "0");
 		break;
 	default:
 		pr_debug("unexpected boot mode = %x\n", boot_mode);
 		break;
 	}

 	switch (forced_mode) {
 	case BOOT_FASTBOOT:
 		printf("Enter fastboot!\n");
 		env_set("preboot", "env set preboot; fastboot 0");
 		break;
 	case BOOT_STM32PROG:
 		env_set("boot_device", "usb");
 		env_set("boot_instance", "0");
 		break;
 	case BOOT_UMS_MMC0:
 	case BOOT_UMS_MMC1:
 	case BOOT_UMS_MMC2:
 		printf("Enter UMS!\n");
 		instance = forced_mode - BOOT_UMS_MMC0;
 		sprintf(cmd, "env set preboot; ums 0 mmc %d", instance);
 		env_set("preboot", cmd);
 		break;
 	case BOOT_RECOVERY:
 		env_set("preboot", "env set preboot; run altbootcmd");
 		break;
 	case BOOT_NORMAL:
 		break;
 	default:
 		pr_debug("unexpected forced boot mode = %x\n", forced_mode);
 		break;
 	}

 	/* clear TAMP for next reboot */
 	clrsetbits_le32(TAMP_BOOT_CONTEXT, TAMP_BOOT_FORCED_MASK, BOOT_NORMAL);
 }

 /*
  * If there is no MAC address in the environment, then it will be initialized
  * (silently) from the value in the OTP.
  */
 static int setup_mac_address(void)
 {
 #if defined(CONFIG_NET)
 	int ret;
 	int i;
 	u32 otp[2];
 	uchar enetaddr[6];
 	struct udevice *dev;

 	/* MAC already in environment */
 	if (eth_env_get_enetaddr("ethaddr", enetaddr))
 		return 0;

 	ret = uclass_get_device_by_driver(UCLASS_MISC,
 					  DM_GET_DRIVER(stm32mp_bsec),
 					  &dev);
 	if (ret)
 		return ret;

 	ret = misc_read(dev, STM32_BSEC_SHADOW(BSEC_OTP_MAC),
 			otp, sizeof(otp));
 	if (ret < 0)
 		return ret;

 	for (i = 0; i < 6; i++)
 		enetaddr[i] = ((uint8_t *)&otp)[i];

 	if (!is_valid_ethaddr(enetaddr)) {
 		pr_err("invalid MAC address in OTP %pM\n", enetaddr);
 		return -EINVAL;
 	}
 	pr_debug("OTP MAC address = %pM\n", enetaddr);
 	ret = !eth_env_set_enetaddr("ethaddr", enetaddr);
 	if (!ret)
 		pr_err("Failed to set mac address %pM from OTP: %d\n",
 		       enetaddr, ret);
 #endif

 	return 0;
 }

 static int setup_serial_number(void)
 {
 	char serial_string[25];
 	u32 otp[3] = {0, 0, 0 };
 	struct udevice *dev;
 	int ret;

 	if (env_get("serial#"))
 		return 0;

 	ret = uclass_get_device_by_driver(UCLASS_MISC,
 					  DM_GET_DRIVER(stm32mp_bsec),
 					  &dev);
 	if (ret)
 		return ret;

 	ret = misc_read(dev, STM32_BSEC_SHADOW(BSEC_OTP_SERIAL),
 			otp, sizeof(otp));
 	if (ret < 0)
 		return ret;

 	sprintf(serial_string, "%08X%08X%08X", otp[0], otp[1], otp[2]);
 	env_set("serial#", serial_string);

 	return 0;
 }

 int arch_misc_init(void)
 {
 	setup_boot_mode();
 	setup_mac_address();
 	setup_serial_number();

 	return 0;
 }
	// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
	/*
	* Copyright (C) 2018, STMicroelectronics - All Rights Reserved
	*/
	#include <common.h>
	#include <clk.h>
	#include <debug_uart.h>
	#include <env.h>
	#include <misc.h>
	#include <asm/io.h>
	#include <asm/arch/stm32.h>
	#include <asm/arch/sys_proto.h>
	#include <dm/device.h>
	#include <dm/uclass.h>

	/* RCC register */
	#define RCC_TZCR (STM32_RCC_BASE + 0x00)
	#define RCC_DBGCFGR (STM32_RCC_BASE + 0x080C)
	#define RCC_BDCR (STM32_RCC_BASE + 0x0140)
	#define RCC_MP_APB5ENSETR (STM32_RCC_BASE + 0x0208)
	#define RCC_MP_AHB5ENSETR (STM32_RCC_BASE + 0x0210)
	#define RCC_BDCR_VSWRST BIT(31)
	#define RCC_BDCR_RTCSRC GENMASK(17, 16)
	#define RCC_DBGCFGR_DBGCKEN BIT(8)

	/* Security register */
	#define ETZPC_TZMA1_SIZE (STM32_ETZPC_BASE + 0x04)
	#define ETZPC_DECPROT0 (STM32_ETZPC_BASE + 0x10)

	#define TZC_GATE_KEEPER (STM32_TZC_BASE + 0x008)
	#define TZC_REGION_ATTRIBUTE0 (STM32_TZC_BASE + 0x110)
	#define TZC_REGION_ID_ACCESS0 (STM32_TZC_BASE + 0x114)

	#define TAMP_CR1 (STM32_TAMP_BASE + 0x00)

	#define PWR_CR1 (STM32_PWR_BASE + 0x00)
	#define PWR_CR1_DBP BIT(8)

	/* DBGMCU register */
	#define DBGMCU_IDC (STM32_DBGMCU_BASE + 0x00)
	#define DBGMCU_APB4FZ1 (STM32_DBGMCU_BASE + 0x2C)
	#define DBGMCU_APB4FZ1_IWDG2 BIT(2)
	#define DBGMCU_IDC_DEV_ID_MASK GENMASK(11, 0)
	#define DBGMCU_IDC_DEV_ID_SHIFT 0
	#define DBGMCU_IDC_REV_ID_MASK GENMASK(31, 16)
	#define DBGMCU_IDC_REV_ID_SHIFT 16

	/* GPIOZ registers */
	#define GPIOZ_SECCFGR 0x54004030

	/* boot interface from Bootrom
	* - boot instance = bit 31:16
	* - boot device = bit 15:0
	*/
	#define BOOTROM_PARAM_ADDR 0x2FFC0078
	#define BOOTROM_MODE_MASK GENMASK(15, 0)
	#define BOOTROM_MODE_SHIFT 0
	#define BOOTROM_INSTANCE_MASK GENMASK(31, 16)
	#define BOOTROM_INSTANCE_SHIFT 16

	/* BSEC OTP index */
	#define BSEC_OTP_RPN 1
	#define BSEC_OTP_SERIAL 13
	#define BSEC_OTP_PKG 16
	#define BSEC_OTP_MAC 57

	/* Device Part Number (RPN) = OTP_DATA1 lower 8 bits */
	#define RPN_SHIFT 0
	#define RPN_MASK GENMASK(7, 0)

	/* Package = bit 27:29 of OTP16
	* - 100: LBGA448 (FFI) => AA = LFBGA 18x18mm 448 balls p. 0.8mm
	* - 011: LBGA354 (LCI) => AB = LFBGA 16x16mm 359 balls p. 0.8mm
	* - 010: TFBGA361 (FFC) => AC = TFBGA 12x12mm 361 balls p. 0.5mm
	* - 001: TFBGA257 (LCC) => AD = TFBGA 10x10mm 257 balls p. 0.5mm
	* - others: Reserved
	*/
	#define PKG_SHIFT 27
	#define PKG_MASK GENMASK(2, 0)

	#if !defined(CONFIG_SPL) \|\| defined(CONFIG_SPL_BUILD)
	#ifndef CONFIG_STM32MP1_TRUSTED
	static void security_init(void)
	{
	/* Disable the backup domain write protection */
	/* the protection is enable at each reset by hardware */
	/* And must be disable by software */
	setbits_le32(PWR_CR1, PWR_CR1_DBP);

	while (!(readl(PWR_CR1) & PWR_CR1_DBP))
	;

	/* If RTC clock isn't enable so this is a cold boot then we need
	* to reset the backup domain
	*/
	if (!(readl(RCC_BDCR) & RCC_BDCR_RTCSRC)) {
	setbits_le32(RCC_BDCR, RCC_BDCR_VSWRST);
	while (!(readl(RCC_BDCR) & RCC_BDCR_VSWRST))
	;
	clrbits_le32(RCC_BDCR, RCC_BDCR_VSWRST);
	}

	/* allow non secure access in Write/Read for all peripheral */
	writel(GENMASK(25, 0), ETZPC_DECPROT0);

	/* Open SYSRAM for no secure access */
	writel(0x0, ETZPC_TZMA1_SIZE);

	/* enable TZC1 TZC2 clock */
	writel(BIT(11) \| BIT(12), RCC_MP_APB5ENSETR);

	/* Region 0 set to no access by default */
	/* bit 0 / 16 => nsaid0 read/write Enable
	* bit 1 / 17 => nsaid1 read/write Enable
	* ...
	* bit 15 / 31 => nsaid15 read/write Enable
	*/
	writel(0xFFFFFFFF, TZC_REGION_ID_ACCESS0);
	/* bit 30 / 31 => Secure Global Enable : write/read */
	/* bit 0 / 1 => Region Enable for filter 0/1 */
	writel(BIT(0) \| BIT(1) \| BIT(30) \| BIT(31), TZC_REGION_ATTRIBUTE0);

	/* Enable Filter 0 and 1 */
	setbits_le32(TZC_GATE_KEEPER, BIT(0) \| BIT(1));

	/* RCC trust zone deactivated */
	writel(0x0, RCC_TZCR);

	/* TAMP: deactivate the internal tamper
	* Bit 23 ITAMP8E: monotonic counter overflow
	* Bit 20 ITAMP5E: RTC calendar overflow
	* Bit 19 ITAMP4E: HSE monitoring
	* Bit 18 ITAMP3E: LSE monitoring
	* Bit 16 ITAMP1E: RTC power domain supply monitoring
	*/
	writel(0x0, TAMP_CR1);

	/* GPIOZ: deactivate the security */
	writel(BIT(0), RCC_MP_AHB5ENSETR);
	writel(0x0, GPIOZ_SECCFGR);
	}
	#endif /* CONFIG_STM32MP1_TRUSTED */

	/*
	* Debug init
	*/
	static void dbgmcu_init(void)
	{
	setbits_le32(RCC_DBGCFGR, RCC_DBGCFGR_DBGCKEN);

	/* Freeze IWDG2 if Cortex-A7 is in debug mode */
	setbits_le32(DBGMCU_APB4FZ1, DBGMCU_APB4FZ1_IWDG2);
	}
	#endif /* !defined(CONFIG_SPL) \|\| defined(CONFIG_SPL_BUILD) */

	#if !defined(CONFIG_STM32MP1_TRUSTED) && \
	(!defined(CONFIG_SPL) \|\| defined(CONFIG_SPL_BUILD))
	/* get bootmode from ROM code boot context: saved in TAMP register */
	static void update_bootmode(void)
	{
	u32 boot_mode;
	u32 bootrom_itf = readl(BOOTROM_PARAM_ADDR);
	u32 bootrom_device, bootrom_instance;

	/* enable TAMP clock = RTCAPBEN */
	writel(BIT(8), RCC_MP_APB5ENSETR);

	/* read bootrom context */
	bootrom_device =
	(bootrom_itf & BOOTROM_MODE_MASK) >> BOOTROM_MODE_SHIFT;
	bootrom_instance =
	(bootrom_itf & BOOTROM_INSTANCE_MASK) >> BOOTROM_INSTANCE_SHIFT;
	boot_mode =
	((bootrom_device << BOOT_TYPE_SHIFT) & BOOT_TYPE_MASK) \|
	((bootrom_instance << BOOT_INSTANCE_SHIFT) &
	BOOT_INSTANCE_MASK);

	/* save the boot mode in TAMP backup register */
	clrsetbits_le32(TAMP_BOOT_CONTEXT,
	TAMP_BOOT_MODE_MASK,
	boot_mode << TAMP_BOOT_MODE_SHIFT);
	}
	#endif

	u32 get_bootmode(void)
	{
	/* read bootmode from TAMP backup register */
	return (readl(TAMP_BOOT_CONTEXT) & TAMP_BOOT_MODE_MASK) >>
	TAMP_BOOT_MODE_SHIFT;
	}

	/*
	* Early system init
	*/
	int arch_cpu_init(void)
	{
	u32 boot_mode;

	/* early armv7 timer init: needed for polling */
	timer_init();

	#if !defined(CONFIG_SPL) \|\| defined(CONFIG_SPL_BUILD)
	dbgmcu_init();
	#ifndef CONFIG_STM32MP1_TRUSTED
	security_init();
	update_bootmode();
	#endif
	#endif

	boot_mode = get_bootmode();

	if ((boot_mode & TAMP_BOOT_DEVICE_MASK) == BOOT_SERIAL_UART)
	gd->flags \|= GD_FLG_SILENT \| GD_FLG_DISABLE_CONSOLE;
	#if defined(CONFIG_DEBUG_UART) && \
	!defined(CONFIG_STM32MP1_TRUSTED) && \
	(!defined(CONFIG_SPL) \|\| defined(CONFIG_SPL_BUILD))
	else
	debug_uart_init();
	#endif

	return 0;
	}

	void enable_caches(void)
	{
	/* Enable D-cache. I-cache is already enabled in start.S */
	dcache_enable();
	}

	static u32 read_idc(void)
	{
	setbits_le32(RCC_DBGCFGR, RCC_DBGCFGR_DBGCKEN);

	return readl(DBGMCU_IDC);
	}

	u32 get_cpu_rev(void)
	{
	return (read_idc() & DBGMCU_IDC_REV_ID_MASK) >> DBGMCU_IDC_REV_ID_SHIFT;
	}

	static u32 get_otp(int index, int shift, int mask)
	{
	int ret;
	struct udevice *dev;
	u32 otp = 0;

	ret = uclass_get_device_by_driver(UCLASS_MISC,
	DM_GET_DRIVER(stm32mp_bsec),
	&dev);

	if (!ret)
	ret = misc_read(dev, STM32_BSEC_SHADOW(index),
	&otp, sizeof(otp));

	return (otp >> shift) & mask;
	}

	/* Get Device Part Number (RPN) from OTP */
	static u32 get_cpu_rpn(void)
	{
	return get_otp(BSEC_OTP_RPN, RPN_SHIFT, RPN_MASK);
	}

	u32 get_cpu_type(void)
	{
	u32 id;

	id = (read_idc() & DBGMCU_IDC_DEV_ID_MASK) >> DBGMCU_IDC_DEV_ID_SHIFT;

	return (id << 16) \| get_cpu_rpn();
	}

	/* Get Package options from OTP */
	u32 get_cpu_package(void)
	{
	return get_otp(BSEC_OTP_PKG, PKG_SHIFT, PKG_MASK);
	}

	#if defined(CONFIG_DISPLAY_CPUINFO)
	int print_cpuinfo(void)
	{
	char cpu_s, cpu_r, *pkg;

	/* MPUs Part Numbers */
	switch (get_cpu_type()) {
	case CPU_STM32MP157Cxx:
	cpu_s = "157C";
	break;
	case CPU_STM32MP157Axx:
	cpu_s = "157A";
	break;
	case CPU_STM32MP153Cxx:
	cpu_s = "153C";
	break;
	case CPU_STM32MP153Axx:
	cpu_s = "153A";
	break;
	case CPU_STM32MP151Cxx:
	cpu_s = "151C";
	break;
	case CPU_STM32MP151Axx:
	cpu_s = "151A";
	break;
	default:
	cpu_s = "????";
	break;
	}

	/* Package */
	switch (get_cpu_package()) {
	case PKG_AA_LBGA448:
	pkg = "AA";
	break;
	case PKG_AB_LBGA354:
	pkg = "AB";
	break;
	case PKG_AC_TFBGA361:
	pkg = "AC";
	break;
	case PKG_AD_TFBGA257:
	pkg = "AD";
	break;
	default:
	pkg = "??";
	break;
	}

	/* REVISION */
	switch (get_cpu_rev()) {
	case CPU_REVA:
	cpu_r = "A";
	break;
	case CPU_REVB:
	cpu_r = "B";
	break;
	default:
	cpu_r = "?";
	break;
	}

	printf("CPU: STM32MP%s%s Rev.%s\n", cpu_s, pkg, cpu_r);

	return 0;
	}
	#endif /* CONFIG_DISPLAY_CPUINFO */

	static void setup_boot_mode(void)
	{
	const u32 serial_addr[] = {
	STM32_USART1_BASE,
	STM32_USART2_BASE,
	STM32_USART3_BASE,
	STM32_UART4_BASE,
	STM32_UART5_BASE,
	STM32_USART6_BASE,
	STM32_UART7_BASE,
	STM32_UART8_BASE
	};
	char cmd[60];
	u32 boot_ctx = readl(TAMP_BOOT_CONTEXT);
	u32 boot_mode =
	(boot_ctx & TAMP_BOOT_MODE_MASK) >> TAMP_BOOT_MODE_SHIFT;
	unsigned int instance = (boot_mode & TAMP_BOOT_INSTANCE_MASK) - 1;
	u32 forced_mode = (boot_ctx & TAMP_BOOT_FORCED_MASK);
	struct udevice *dev;
	int alias;

	pr_debug("%s: boot_ctx=0x%x => boot_mode=%x, instance=%d forced=%x\n",
	__func__, boot_ctx, boot_mode, instance, forced_mode);
	switch (boot_mode & TAMP_BOOT_DEVICE_MASK) {
	case BOOT_SERIAL_UART:
	if (instance > ARRAY_SIZE(serial_addr))
	break;
	/* serial : search associated alias in devicetree */
	sprintf(cmd, "serial@%x", serial_addr[instance]);
	if (uclass_get_device_by_name(UCLASS_SERIAL, cmd, &dev))
	break;
	if (fdtdec_get_alias_seq(gd->fdt_blob, "serial",
	dev_of_offset(dev), &alias))
	break;
	sprintf(cmd, "%d", alias);
	env_set("boot_device", "serial");
	env_set("boot_instance", cmd);

	/* restore console on uart when not used */
	if (gd->cur_serial_dev != dev) {
	gd->flags &= ~(GD_FLG_SILENT \|
	GD_FLG_DISABLE_CONSOLE);
	printf("serial boot with console enabled!\n");
	}
	break;
	case BOOT_SERIAL_USB:
	env_set("boot_device", "usb");
	env_set("boot_instance", "0");
	break;
	case BOOT_FLASH_SD:
	case BOOT_FLASH_EMMC:
	sprintf(cmd, "%d", instance);
	env_set("boot_device", "mmc");
	env_set("boot_instance", cmd);
	break;
	case BOOT_FLASH_NAND:
	env_set("boot_device", "nand");
	env_set("boot_instance", "0");
	break;
	case BOOT_FLASH_NOR:
	env_set("boot_device", "nor");
	env_set("boot_instance", "0");
	break;
	default:
	pr_debug("unexpected boot mode = %x\n", boot_mode);
	break;
	}

	switch (forced_mode) {
	case BOOT_FASTBOOT:
	printf("Enter fastboot!\n");
	env_set("preboot", "env set preboot; fastboot 0");
	break;
	case BOOT_STM32PROG:
	env_set("boot_device", "usb");
	env_set("boot_instance", "0");
	break;
	case BOOT_UMS_MMC0:
	case BOOT_UMS_MMC1:
	case BOOT_UMS_MMC2:
	printf("Enter UMS!\n");
	instance = forced_mode - BOOT_UMS_MMC0;
	sprintf(cmd, "env set preboot; ums 0 mmc %d", instance);
	env_set("preboot", cmd);
	break;
	case BOOT_RECOVERY:
	env_set("preboot", "env set preboot; run altbootcmd");
	break;
	case BOOT_NORMAL:
	break;
	default:
	pr_debug("unexpected forced boot mode = %x\n", forced_mode);
	break;
	}

	/* clear TAMP for next reboot */
	clrsetbits_le32(TAMP_BOOT_CONTEXT, TAMP_BOOT_FORCED_MASK, BOOT_NORMAL);
	}

	/*
	* If there is no MAC address in the environment, then it will be initialized
	* (silently) from the value in the OTP.
	*/
	static int setup_mac_address(void)
	{
	#if defined(CONFIG_NET)
	int ret;
	int i;
	u32 otp[2];
	uchar enetaddr[6];
	struct udevice *dev;

	/* MAC already in environment */
	if (eth_env_get_enetaddr("ethaddr", enetaddr))
	return 0;

	ret = uclass_get_device_by_driver(UCLASS_MISC,
	DM_GET_DRIVER(stm32mp_bsec),
	&dev);
	if (ret)
	return ret;

	ret = misc_read(dev, STM32_BSEC_SHADOW(BSEC_OTP_MAC),
	otp, sizeof(otp));
	if (ret < 0)
	return ret;

	for (i = 0; i < 6; i++)
	enetaddr[i] = ((uint8_t *)&otp)[i];

	if (!is_valid_ethaddr(enetaddr)) {
	pr_err("invalid MAC address in OTP %pM\n", enetaddr);
	return -EINVAL;
	}
	pr_debug("OTP MAC address = %pM\n", enetaddr);
	ret = !eth_env_set_enetaddr("ethaddr", enetaddr);
	if (!ret)
	pr_err("Failed to set mac address %pM from OTP: %d\n",
	enetaddr, ret);
	#endif

	return 0;
	}

	static int setup_serial_number(void)
	{
	char serial_string[25];
	u32 otp[3] = {0, 0, 0 };
	struct udevice *dev;
	int ret;

	if (env_get("serial#"))
	return 0;

	ret = uclass_get_device_by_driver(UCLASS_MISC,
	DM_GET_DRIVER(stm32mp_bsec),
	&dev);
	if (ret)
	return ret;

	ret = misc_read(dev, STM32_BSEC_SHADOW(BSEC_OTP_SERIAL),
	otp, sizeof(otp));
	if (ret < 0)
	return ret;

	sprintf(serial_string, "%08X%08X%08X", otp[0], otp[1], otp[2]);
	env_set("serial#", serial_string);

	return 0;
	}

	int arch_misc_init(void)
	{
	setup_boot_mode();
	setup_mac_address();
	setup_serial_number();

	return 0;
	}