| // SPDX-License-Identifier: GPL-2.0 OR MIT |
| /* |
| * Copyright (C) 2019 BayLibre SAS. |
| * Author: Fabien Parent <fparent@baylibre.com> |
| */ |
| |
| /dts-v1/; |
| |
| #include <config.h> |
| #include "mt8516.dtsi" |
| |
| / { |
| model = "Pumpkin MT8516"; |
| |
| chosen { |
| stdout-path = &uart0; |
| }; |
| |
| memory@40000000 { |
| device_type = "memory"; |
| reg = <0x40000000 0x20000000>; |
| }; |
| |
| reserved-memory { |
| #address-cells = <2>; |
| #size-cells = <2>; |
| |
| /* 128 KiB reserved for ARM Trusted Firmware (BL31) */ |
| bl31_secmon_reserved: secmon@43000000 { |
| no-map; |
| reg = <0 0x43000000 0 0x20000>; |
| }; |
| }; |
| |
| reg_1p8v: regulator-1p8v { |
| compatible = "regulator-fixed"; |
| regulator-name = "fixed-1.8V"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| reg_3p3v: regulator-3p3v { |
| compatible = "regulator-fixed"; |
| regulator-name = "fixed-3.3V"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| }; |
| |
| &mmc0 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&mmc0_pins_default>; |
| bus-width = <4>; |
| max-frequency = <200000000>; |
| cap-mmc-highspeed; |
| mmc-hs200-1_8v; |
| cap-mmc-hw-reset; |
| vmmc-supply = <®_3p3v>; |
| vqmmc-supply = <®_1p8v>; |
| non-removable; |
| status = "okay"; |
| }; |
| |
| &pinctrl { |
| mmc0_pins_default: mmc0default { |
| mux { |
| function = "msdc"; |
| groups = "msdc0"; |
| }; |
| |
| conf-cmd-data { |
| pins = "MSDC0_CMD", "MSDC0_DAT0", "MSDC0_DAT1", |
| "MSDC0_DAT2", "MSDC0_DAT3", "MSDC0_DAT4", |
| "MSDC0_DAT5", "MSDC0_DAT6", "MSDC0_DAT7"; |
| input-enable; |
| bias-pull-up; |
| }; |
| |
| conf-clk { |
| pins = "MSDC0_CLK"; |
| bias-pull-down; |
| }; |
| |
| conf-rst { |
| pins = "MSDC0_RSTB"; |
| bias-pull-up; |
| }; |
| }; |
| |
| uart0_pins: uart0 { |
| mux { |
| function = "uart"; |
| groups = "uart0_0_rxd_txd"; |
| }; |
| }; |
| }; |
| |
| &uart0 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&uart0_pins>; |
| status = "okay"; |
| }; |
| |
| &watchdog { |
| status = "okay"; |
| }; |
| |
| &usb0 { |
| status = "okay"; |
| }; |