| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * (C) Copyright 2019 |
| * Alex Marginean, NXP |
| */ |
| |
| #include <dm.h> |
| #include <errno.h> |
| #include <miiphy.h> |
| #include <i2c.h> |
| |
| /* |
| * This driver is used for MDIO muxes driven by writing to a register of an I2C |
| * chip. The board it was developed for uses a mux controlled by on-board FPGA |
| * which in turn is accessed as a chip over I2C. |
| */ |
| |
| struct mdio_mux_i2creg_priv { |
| struct udevice *chip; |
| int reg; |
| int mask; |
| }; |
| |
| static int mdio_mux_i2creg_select(struct udevice *mux, int cur, int sel) |
| { |
| struct mdio_mux_i2creg_priv *priv = dev_get_priv(mux); |
| u8 val, val_old; |
| |
| /* if last selection didn't change we're good to go */ |
| if (cur == sel) |
| return 0; |
| |
| val_old = dm_i2c_reg_read(priv->chip, priv->reg); |
| val = (val_old & ~priv->mask) | (sel & priv->mask); |
| debug("%s: chip %s, reg %x, val %x => %x\n", __func__, priv->chip->name, |
| priv->reg, val_old, val); |
| dm_i2c_reg_write(priv->chip, priv->reg, val); |
| |
| return 0; |
| } |
| |
| static const struct mdio_mux_ops mdio_mux_i2creg_ops = { |
| .select = mdio_mux_i2creg_select, |
| }; |
| |
| static int mdio_mux_i2creg_probe(struct udevice *dev) |
| { |
| struct mdio_mux_i2creg_priv *priv = dev_get_priv(dev); |
| ofnode chip_node, bus_node; |
| struct udevice *i2c_bus; |
| u32 reg_mask[2]; |
| u32 chip_addr; |
| int err; |
| |
| /* read the register addr/mask pair */ |
| err = dev_read_u32_array(dev, "mux-reg-masks", reg_mask, 2); |
| if (err) { |
| debug("%s: error reading mux-reg-masks property\n", __func__); |
| return err; |
| } |
| |
| /* parent should be an I2C chip, grandparent should be an I2C bus */ |
| chip_node = ofnode_get_parent(dev->node); |
| bus_node = ofnode_get_parent(chip_node); |
| |
| err = uclass_get_device_by_ofnode(UCLASS_I2C, bus_node, &i2c_bus); |
| if (err) { |
| debug("%s: can't find I2C bus for node %s\n", __func__, |
| ofnode_get_name(bus_node)); |
| return err; |
| } |
| |
| err = ofnode_read_u32(chip_node, "reg", &chip_addr); |
| if (err) { |
| debug("%s: can't read chip address in %s\n", __func__, |
| ofnode_get_name(chip_node)); |
| return err; |
| } |
| |
| err = i2c_get_chip(i2c_bus, (uint)chip_addr, 1, &priv->chip); |
| if (err) { |
| debug("%s: can't find i2c chip device for addr %x\n", __func__, |
| chip_addr); |
| return err; |
| } |
| |
| priv->reg = (int)reg_mask[0]; |
| priv->mask = (int)reg_mask[1]; |
| |
| debug("%s: chip %s, reg %x, mask %x\n", __func__, priv->chip->name, |
| priv->reg, priv->mask); |
| |
| return 0; |
| } |
| |
| static const struct udevice_id mdio_mux_i2creg_ids[] = { |
| { .compatible = "mdio-mux-i2creg" }, |
| { } |
| }; |
| |
| U_BOOT_DRIVER(mdio_mux_i2creg) = { |
| .name = "mdio_mux_i2creg", |
| .id = UCLASS_MDIO_MUX, |
| .of_match = mdio_mux_i2creg_ids, |
| .probe = mdio_mux_i2creg_probe, |
| .ops = &mdio_mux_i2creg_ops, |
| .priv_auto_alloc_size = sizeof(struct mdio_mux_i2creg_priv), |
| }; |