| // SPDX-License-Identifier: GPL-2.0+ |
| /** |
| * PCIe SERDES driver for AM654x SoC |
| * |
| * Copyright (C) 2018 Texas Instruments |
| * Author: Kishon Vijay Abraham I <kishon@ti.com> |
| */ |
| |
| #include <common.h> |
| #include <clk-uclass.h> |
| #include <dm.h> |
| #include <dm/device.h> |
| #include <dm/lists.h> |
| #include <dt-bindings/phy/phy.h> |
| #include <generic-phy.h> |
| #include <asm/io.h> |
| #include <asm/arch/sys_proto.h> |
| #include <power-domain.h> |
| #include <regmap.h> |
| #include <syscon.h> |
| |
| #define CMU_R07C 0x7c |
| #define CMU_MASTER_CDN_O BIT(24) |
| |
| #define COMLANE_R138 0xb38 |
| #define CONFIG_VERSION_REG_MASK GENMASK(23, 16) |
| #define CONFIG_VERSION_REG_SHIFT 16 |
| #define VERSION 0x70 |
| |
| #define COMLANE_R190 0xb90 |
| #define L1_MASTER_CDN_O BIT(9) |
| |
| #define COMLANE_R194 0xb94 |
| #define CMU_OK_I_0 BIT(19) |
| |
| #define SERDES_CTRL 0x1fd0 |
| #define POR_EN BIT(29) |
| |
| #define WIZ_LANEXCTL_STS 0x1fe0 |
| #define TX0_ENABLE_OVL BIT(31) |
| #define TX0_ENABLE_MASK GENMASK(30, 29) |
| #define TX0_ENABLE_SHIFT 29 |
| #define TX0_DISABLE_STATE 0x0 |
| #define TX0_SLEEP_STATE 0x1 |
| #define TX0_SNOOZE_STATE 0x2 |
| #define TX0_ENABLE_STATE 0x3 |
| #define RX0_ENABLE_OVL BIT(15) |
| #define RX0_ENABLE_MASK GENMASK(14, 13) |
| #define RX0_ENABLE_SHIFT 13 |
| #define RX0_DISABLE_STATE 0x0 |
| #define RX0_SLEEP_STATE 0x1 |
| #define RX0_SNOOZE_STATE 0x2 |
| #define RX0_ENABLE_STATE 0x3 |
| |
| #define WIZ_PLL_CTRL 0x1ff4 |
| #define PLL_ENABLE_OVL BIT(31) |
| #define PLL_ENABLE_MASK GENMASK(30, 29) |
| #define PLL_ENABLE_SHIFT 29 |
| #define PLL_DISABLE_STATE 0x0 |
| #define PLL_SLEEP_STATE 0x1 |
| #define PLL_SNOOZE_STATE 0x2 |
| #define PLL_ENABLE_STATE 0x3 |
| #define PLL_OK BIT(28) |
| |
| #define PLL_LOCK_TIME 1000 /* in milliseconds */ |
| #define SLEEP_TIME 100 /* in microseconds */ |
| |
| #define LANE_USB3 0x0 |
| #define LANE_PCIE0_LANE0 0x1 |
| |
| #define LANE_PCIE1_LANE0 0x0 |
| #define LANE_PCIE0_LANE1 0x1 |
| |
| #define SERDES_NUM_CLOCKS 3 |
| |
| /* SERDES control MMR bit offsets */ |
| #define SERDES_CTL_LANE_FUNC_SEL_SHIFT 0 |
| #define SERDES_CTL_LANE_FUNC_SEL_MASK GENMASK(1, 0) |
| #define SERDES_CTL_CLK_SEL_SHIFT 4 |
| #define SERDES_CTL_CLK_SEL_MASK GENMASK(7, 4) |
| |
| /** |
| * struct serdes_am654_mux_clk_data - clock controller information structure |
| */ |
| struct serdes_am654_mux_clk_data { |
| struct regmap *regmap; |
| struct clk_bulk parents; |
| }; |
| |
| static int serdes_am654_mux_clk_probe(struct udevice *dev) |
| { |
| struct serdes_am654_mux_clk_data *data = dev_get_priv(dev); |
| struct udevice *syscon; |
| struct regmap *regmap; |
| int ret; |
| |
| debug("%s(dev=%s)\n", __func__, dev->name); |
| |
| if (!data) |
| return -ENOMEM; |
| |
| ret = uclass_get_device_by_phandle(UCLASS_SYSCON, dev, |
| "ti,serdes-clk", &syscon); |
| if (ret) { |
| dev_err(dev, "unable to find syscon device\n"); |
| return ret; |
| } |
| |
| regmap = syscon_get_regmap(syscon); |
| if (IS_ERR(regmap)) { |
| dev_err(dev, "Fail to get Syscon regmap\n"); |
| return PTR_ERR(regmap); |
| } |
| |
| data->regmap = regmap; |
| |
| ret = clk_get_bulk(dev, &data->parents); |
| if (ret) { |
| dev_err(dev, "Failed to obtain parent clocks\n"); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static int mux_table[SERDES_NUM_CLOCKS][3] = { |
| /* |
| * The entries represent values for selecting between |
| * {left input, external reference clock, right input} |
| * Only one of Left Output or Right Output should be used since |
| * both left and right output clock uses the same bits and modifying |
| * one clock will impact the other. |
| */ |
| { BIT(2), 0, BIT(0) }, /* Mux of CMU refclk */ |
| { -1, BIT(3), BIT(1) }, /* Mux of Left Output */ |
| { BIT(1), BIT(3) | BIT(1), -1 }, /* Mux of Right Output */ |
| }; |
| |
| static int serdes_am654_mux_clk_set_parent(struct clk *clk, struct clk *parent) |
| { |
| struct serdes_am654_mux_clk_data *data = dev_get_priv(clk->dev); |
| u32 val; |
| int i; |
| |
| debug("%s(clk=%s, parent=%s)\n", __func__, clk->dev->name, |
| parent->dev->name); |
| |
| /* |
| * Since we have the same device-tree node represent both the |
| * clock and serdes device, we have two devices associated with |
| * the serdes node. assigned-clocks for this node is processed twice, |
| * once for the clock device and another time for the serdes |
| * device. When it is processed for the clock device, it is before |
| * the probe for clock device has been called. We ignore this case |
| * and rely on assigned-clocks to be processed correctly for the |
| * serdes case. |
| */ |
| if (!data->regmap) |
| return 0; |
| |
| for (i = 0; i < data->parents.count; i++) { |
| if (clk_is_match(&data->parents.clks[i], parent)) |
| break; |
| } |
| |
| if (i >= data->parents.count) |
| return -EINVAL; |
| |
| val = mux_table[clk->id][i]; |
| val <<= SERDES_CTL_CLK_SEL_SHIFT; |
| |
| regmap_update_bits(data->regmap, 0, SERDES_CTL_CLK_SEL_MASK, val); |
| |
| return 0; |
| } |
| |
| static struct clk_ops serdes_am654_mux_clk_ops = { |
| .set_parent = serdes_am654_mux_clk_set_parent, |
| }; |
| |
| U_BOOT_DRIVER(serdes_am654_mux_clk) = { |
| .name = "ti-serdes-am654-mux-clk", |
| .id = UCLASS_CLK, |
| .probe = serdes_am654_mux_clk_probe, |
| .priv_auto_alloc_size = sizeof(struct serdes_am654_mux_clk_data), |
| .ops = &serdes_am654_mux_clk_ops, |
| }; |
| |
| struct serdes_am654 { |
| struct regmap *regmap; |
| struct regmap *serdes_ctl; |
| }; |
| |
| static int serdes_am654_enable_pll(struct serdes_am654 *phy) |
| { |
| u32 mask = PLL_ENABLE_OVL | PLL_ENABLE_MASK; |
| u32 val = PLL_ENABLE_OVL | (PLL_ENABLE_STATE << PLL_ENABLE_SHIFT); |
| |
| regmap_update_bits(phy->regmap, WIZ_PLL_CTRL, mask, val); |
| |
| return regmap_read_poll_timeout(phy->regmap, WIZ_PLL_CTRL, val, |
| val & PLL_OK, 1000, PLL_LOCK_TIME); |
| } |
| |
| static void serdes_am654_disable_pll(struct serdes_am654 *phy) |
| { |
| u32 mask = PLL_ENABLE_OVL | PLL_ENABLE_MASK; |
| |
| regmap_update_bits(phy->regmap, WIZ_PLL_CTRL, mask, 0); |
| } |
| |
| static int serdes_am654_enable_txrx(struct serdes_am654 *phy) |
| { |
| u32 mask; |
| u32 val; |
| |
| /* Enable TX */ |
| mask = TX0_ENABLE_OVL | TX0_ENABLE_MASK; |
| val = TX0_ENABLE_OVL | (TX0_ENABLE_STATE << TX0_ENABLE_SHIFT); |
| regmap_update_bits(phy->regmap, WIZ_LANEXCTL_STS, mask, val); |
| |
| /* Enable RX */ |
| mask = RX0_ENABLE_OVL | RX0_ENABLE_MASK; |
| val = RX0_ENABLE_OVL | (RX0_ENABLE_STATE << RX0_ENABLE_SHIFT); |
| regmap_update_bits(phy->regmap, WIZ_LANEXCTL_STS, mask, val); |
| |
| return 0; |
| } |
| |
| static int serdes_am654_disable_txrx(struct serdes_am654 *phy) |
| { |
| u32 mask; |
| |
| /* Disable TX */ |
| mask = TX0_ENABLE_OVL | TX0_ENABLE_MASK; |
| regmap_update_bits(phy->regmap, WIZ_LANEXCTL_STS, mask, 0); |
| |
| /* Disable RX */ |
| mask = RX0_ENABLE_OVL | RX0_ENABLE_MASK; |
| regmap_update_bits(phy->regmap, WIZ_LANEXCTL_STS, mask, 0); |
| |
| return 0; |
| } |
| |
| static int serdes_am654_power_on(struct phy *x) |
| { |
| struct serdes_am654 *phy = dev_get_priv(x->dev); |
| int ret; |
| u32 val; |
| |
| ret = serdes_am654_enable_pll(phy); |
| if (ret) { |
| dev_err(x->dev, "Failed to enable PLL\n"); |
| return ret; |
| } |
| |
| ret = serdes_am654_enable_txrx(phy); |
| if (ret) { |
| dev_err(x->dev, "Failed to enable TX RX\n"); |
| return ret; |
| } |
| |
| return regmap_read_poll_timeout(phy->regmap, COMLANE_R194, val, |
| val & CMU_OK_I_0, SLEEP_TIME, |
| PLL_LOCK_TIME); |
| } |
| |
| static int serdes_am654_power_off(struct phy *x) |
| { |
| struct serdes_am654 *phy = dev_get_priv(x->dev); |
| |
| serdes_am654_disable_txrx(phy); |
| serdes_am654_disable_pll(phy); |
| |
| return 0; |
| } |
| |
| static int serdes_am654_init(struct phy *x) |
| { |
| struct serdes_am654 *phy = dev_get_priv(x->dev); |
| u32 mask; |
| u32 val; |
| |
| mask = CONFIG_VERSION_REG_MASK; |
| val = VERSION << CONFIG_VERSION_REG_SHIFT; |
| regmap_update_bits(phy->regmap, COMLANE_R138, mask, val); |
| |
| val = CMU_MASTER_CDN_O; |
| regmap_update_bits(phy->regmap, CMU_R07C, val, val); |
| |
| val = L1_MASTER_CDN_O; |
| regmap_update_bits(phy->regmap, COMLANE_R190, val, val); |
| |
| return 0; |
| } |
| |
| static int serdes_am654_reset(struct phy *x) |
| { |
| struct serdes_am654 *phy = dev_get_priv(x->dev); |
| u32 val; |
| |
| val = POR_EN; |
| regmap_update_bits(phy->regmap, SERDES_CTRL, val, val); |
| mdelay(1); |
| regmap_update_bits(phy->regmap, SERDES_CTRL, val, 0); |
| |
| return 0; |
| } |
| |
| static int serdes_am654_of_xlate(struct phy *x, |
| struct ofnode_phandle_args *args) |
| { |
| struct serdes_am654 *phy = dev_get_priv(x->dev); |
| |
| if (args->args_count != 2) { |
| dev_err(phy->dev, "Invalid DT PHY argument count: %d\n", |
| args->args_count); |
| return -EINVAL; |
| } |
| |
| if (args->args[0] != PHY_TYPE_PCIE) { |
| dev_err(phy->dev, "Unrecognized PHY type: %d\n", |
| args->args[0]); |
| return -EINVAL; |
| } |
| |
| x->id = args->args[0] | (args->args[1] << 16); |
| |
| /* Setup mux mode using second argument */ |
| regmap_update_bits(phy->serdes_ctl, 0, SERDES_CTL_LANE_FUNC_SEL_MASK, |
| args->args[1]); |
| |
| return 0; |
| } |
| |
| static int serdes_am654_bind(struct udevice *dev) |
| { |
| int ret; |
| |
| ret = device_bind_driver_to_node(dev->parent, |
| "ti-serdes-am654-mux-clk", |
| dev_read_name(dev), dev->node, |
| NULL); |
| if (ret) { |
| dev_err(dev, "%s: not able to bind clock driver\n", __func__); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static int serdes_am654_probe(struct udevice *dev) |
| { |
| struct serdes_am654 *phy = dev_get_priv(dev); |
| struct power_domain serdes_pwrdmn; |
| struct regmap *serdes_ctl; |
| struct regmap *map; |
| int ret; |
| |
| ret = regmap_init_mem(dev_ofnode(dev), &map); |
| if (ret) |
| return ret; |
| |
| phy->regmap = map; |
| |
| serdes_ctl = syscon_regmap_lookup_by_phandle(dev, "ti,serdes-clk"); |
| if (IS_ERR(serdes_ctl)) { |
| dev_err(dev, "unable to find syscon device\n"); |
| return PTR_ERR(serdes_ctl); |
| } |
| |
| phy->serdes_ctl = serdes_ctl; |
| |
| ret = power_domain_get_by_index(dev, &serdes_pwrdmn, 0); |
| if (ret) { |
| dev_err(dev, "failed to get power domain\n"); |
| return ret; |
| } |
| |
| ret = power_domain_on(&serdes_pwrdmn); |
| if (ret) { |
| dev_err(dev, "Power domain on failed\n"); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static const struct udevice_id serdes_am654_phy_ids[] = { |
| { |
| .compatible = "ti,phy-am654-serdes", |
| }, |
| }; |
| |
| static const struct phy_ops serdes_am654_phy_ops = { |
| .reset = serdes_am654_reset, |
| .init = serdes_am654_init, |
| .power_on = serdes_am654_power_on, |
| .power_off = serdes_am654_power_off, |
| .of_xlate = serdes_am654_of_xlate, |
| }; |
| |
| U_BOOT_DRIVER(am654_serdes_phy) = { |
| .name = "am654_serdes_phy", |
| .id = UCLASS_PHY, |
| .of_match = serdes_am654_phy_ids, |
| .bind = serdes_am654_bind, |
| .ops = &serdes_am654_phy_ops, |
| .probe = serdes_am654_probe, |
| .priv_auto_alloc_size = sizeof(struct serdes_am654), |
| }; |