blob: a46e8438f7c2bf91ae0cc65bed98bfaf1d7941bf [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
/*
* Copyright (C) 2018, STMicroelectronics - All Rights Reserved
*/
#include <common.h>
#include <clk.h>
#include <debug_uart.h>
#include <env.h>
#include <misc.h>
#include <asm/io.h>
#include <asm/arch/stm32.h>
#include <asm/arch/sys_proto.h>
#include <dm/device.h>
#include <dm/uclass.h>
/* RCC register */
#define RCC_TZCR (STM32_RCC_BASE + 0x00)
#define RCC_DBGCFGR (STM32_RCC_BASE + 0x080C)
#define RCC_BDCR (STM32_RCC_BASE + 0x0140)
#define RCC_MP_APB5ENSETR (STM32_RCC_BASE + 0x0208)
#define RCC_MP_AHB5ENSETR (STM32_RCC_BASE + 0x0210)
#define RCC_BDCR_VSWRST BIT(31)
#define RCC_BDCR_RTCSRC GENMASK(17, 16)
#define RCC_DBGCFGR_DBGCKEN BIT(8)
/* Security register */
#define ETZPC_TZMA1_SIZE (STM32_ETZPC_BASE + 0x04)
#define ETZPC_DECPROT0 (STM32_ETZPC_BASE + 0x10)
#define TZC_GATE_KEEPER (STM32_TZC_BASE + 0x008)
#define TZC_REGION_ATTRIBUTE0 (STM32_TZC_BASE + 0x110)
#define TZC_REGION_ID_ACCESS0 (STM32_TZC_BASE + 0x114)
#define TAMP_CR1 (STM32_TAMP_BASE + 0x00)
#define PWR_CR1 (STM32_PWR_BASE + 0x00)
#define PWR_CR1_DBP BIT(8)
/* DBGMCU register */
#define DBGMCU_IDC (STM32_DBGMCU_BASE + 0x00)
#define DBGMCU_APB4FZ1 (STM32_DBGMCU_BASE + 0x2C)
#define DBGMCU_APB4FZ1_IWDG2 BIT(2)
#define DBGMCU_IDC_DEV_ID_MASK GENMASK(11, 0)
#define DBGMCU_IDC_DEV_ID_SHIFT 0
#define DBGMCU_IDC_REV_ID_MASK GENMASK(31, 16)
#define DBGMCU_IDC_REV_ID_SHIFT 16
/* GPIOZ registers */
#define GPIOZ_SECCFGR 0x54004030
/* boot interface from Bootrom
* - boot instance = bit 31:16
* - boot device = bit 15:0
*/
#define BOOTROM_PARAM_ADDR 0x2FFC0078
#define BOOTROM_MODE_MASK GENMASK(15, 0)
#define BOOTROM_MODE_SHIFT 0
#define BOOTROM_INSTANCE_MASK GENMASK(31, 16)
#define BOOTROM_INSTANCE_SHIFT 16
/* BSEC OTP index */
#define BSEC_OTP_RPN 1
#define BSEC_OTP_SERIAL 13
#define BSEC_OTP_PKG 16
#define BSEC_OTP_MAC 57
/* Device Part Number (RPN) = OTP_DATA1 lower 8 bits */
#define RPN_SHIFT 0
#define RPN_MASK GENMASK(7, 0)
/* Package = bit 27:29 of OTP16
* - 100: LBGA448 (FFI) => AA = LFBGA 18x18mm 448 balls p. 0.8mm
* - 011: LBGA354 (LCI) => AB = LFBGA 16x16mm 359 balls p. 0.8mm
* - 010: TFBGA361 (FFC) => AC = TFBGA 12x12mm 361 balls p. 0.5mm
* - 001: TFBGA257 (LCC) => AD = TFBGA 10x10mm 257 balls p. 0.5mm
* - others: Reserved
*/
#define PKG_SHIFT 27
#define PKG_MASK GENMASK(2, 0)
#if !defined(CONFIG_SPL) || defined(CONFIG_SPL_BUILD)
#ifndef CONFIG_STM32MP1_TRUSTED
static void security_init(void)
{
/* Disable the backup domain write protection */
/* the protection is enable at each reset by hardware */
/* And must be disable by software */
setbits_le32(PWR_CR1, PWR_CR1_DBP);
while (!(readl(PWR_CR1) & PWR_CR1_DBP))
;
/* If RTC clock isn't enable so this is a cold boot then we need
* to reset the backup domain
*/
if (!(readl(RCC_BDCR) & RCC_BDCR_RTCSRC)) {
setbits_le32(RCC_BDCR, RCC_BDCR_VSWRST);
while (!(readl(RCC_BDCR) & RCC_BDCR_VSWRST))
;
clrbits_le32(RCC_BDCR, RCC_BDCR_VSWRST);
}
/* allow non secure access in Write/Read for all peripheral */
writel(GENMASK(25, 0), ETZPC_DECPROT0);
/* Open SYSRAM for no secure access */
writel(0x0, ETZPC_TZMA1_SIZE);
/* enable TZC1 TZC2 clock */
writel(BIT(11) | BIT(12), RCC_MP_APB5ENSETR);
/* Region 0 set to no access by default */
/* bit 0 / 16 => nsaid0 read/write Enable
* bit 1 / 17 => nsaid1 read/write Enable
* ...
* bit 15 / 31 => nsaid15 read/write Enable
*/
writel(0xFFFFFFFF, TZC_REGION_ID_ACCESS0);
/* bit 30 / 31 => Secure Global Enable : write/read */
/* bit 0 / 1 => Region Enable for filter 0/1 */
writel(BIT(0) | BIT(1) | BIT(30) | BIT(31), TZC_REGION_ATTRIBUTE0);
/* Enable Filter 0 and 1 */
setbits_le32(TZC_GATE_KEEPER, BIT(0) | BIT(1));
/* RCC trust zone deactivated */
writel(0x0, RCC_TZCR);
/* TAMP: deactivate the internal tamper
* Bit 23 ITAMP8E: monotonic counter overflow
* Bit 20 ITAMP5E: RTC calendar overflow
* Bit 19 ITAMP4E: HSE monitoring
* Bit 18 ITAMP3E: LSE monitoring
* Bit 16 ITAMP1E: RTC power domain supply monitoring
*/
writel(0x0, TAMP_CR1);
/* GPIOZ: deactivate the security */
writel(BIT(0), RCC_MP_AHB5ENSETR);
writel(0x0, GPIOZ_SECCFGR);
}
#endif /* CONFIG_STM32MP1_TRUSTED */
/*
* Debug init
*/
static void dbgmcu_init(void)
{
setbits_le32(RCC_DBGCFGR, RCC_DBGCFGR_DBGCKEN);
/* Freeze IWDG2 if Cortex-A7 is in debug mode */
setbits_le32(DBGMCU_APB4FZ1, DBGMCU_APB4FZ1_IWDG2);
}
#endif /* !defined(CONFIG_SPL) || defined(CONFIG_SPL_BUILD) */
#if !defined(CONFIG_STM32MP1_TRUSTED) && \
(!defined(CONFIG_SPL) || defined(CONFIG_SPL_BUILD))
/* get bootmode from ROM code boot context: saved in TAMP register */
static void update_bootmode(void)
{
u32 boot_mode;
u32 bootrom_itf = readl(BOOTROM_PARAM_ADDR);
u32 bootrom_device, bootrom_instance;
/* enable TAMP clock = RTCAPBEN */
writel(BIT(8), RCC_MP_APB5ENSETR);
/* read bootrom context */
bootrom_device =
(bootrom_itf & BOOTROM_MODE_MASK) >> BOOTROM_MODE_SHIFT;
bootrom_instance =
(bootrom_itf & BOOTROM_INSTANCE_MASK) >> BOOTROM_INSTANCE_SHIFT;
boot_mode =
((bootrom_device << BOOT_TYPE_SHIFT) & BOOT_TYPE_MASK) |
((bootrom_instance << BOOT_INSTANCE_SHIFT) &
BOOT_INSTANCE_MASK);
/* save the boot mode in TAMP backup register */
clrsetbits_le32(TAMP_BOOT_CONTEXT,
TAMP_BOOT_MODE_MASK,
boot_mode << TAMP_BOOT_MODE_SHIFT);
}
#endif
u32 get_bootmode(void)
{
/* read bootmode from TAMP backup register */
return (readl(TAMP_BOOT_CONTEXT) & TAMP_BOOT_MODE_MASK) >>
TAMP_BOOT_MODE_SHIFT;
}
/*
* Early system init
*/
int arch_cpu_init(void)
{
u32 boot_mode;
/* early armv7 timer init: needed for polling */
timer_init();
#if !defined(CONFIG_SPL) || defined(CONFIG_SPL_BUILD)
dbgmcu_init();
#ifndef CONFIG_STM32MP1_TRUSTED
security_init();
update_bootmode();
#endif
#endif
boot_mode = get_bootmode();
if ((boot_mode & TAMP_BOOT_DEVICE_MASK) == BOOT_SERIAL_UART)
gd->flags |= GD_FLG_SILENT | GD_FLG_DISABLE_CONSOLE;
#if defined(CONFIG_DEBUG_UART) && \
!defined(CONFIG_STM32MP1_TRUSTED) && \
(!defined(CONFIG_SPL) || defined(CONFIG_SPL_BUILD))
else
debug_uart_init();
#endif
return 0;
}
void enable_caches(void)
{
/* Enable D-cache. I-cache is already enabled in start.S */
dcache_enable();
}
static u32 read_idc(void)
{
setbits_le32(RCC_DBGCFGR, RCC_DBGCFGR_DBGCKEN);
return readl(DBGMCU_IDC);
}
u32 get_cpu_rev(void)
{
return (read_idc() & DBGMCU_IDC_REV_ID_MASK) >> DBGMCU_IDC_REV_ID_SHIFT;
}
static u32 get_otp(int index, int shift, int mask)
{
int ret;
struct udevice *dev;
u32 otp = 0;
ret = uclass_get_device_by_driver(UCLASS_MISC,
DM_GET_DRIVER(stm32mp_bsec),
&dev);
if (!ret)
ret = misc_read(dev, STM32_BSEC_SHADOW(index),
&otp, sizeof(otp));
return (otp >> shift) & mask;
}
/* Get Device Part Number (RPN) from OTP */
static u32 get_cpu_rpn(void)
{
return get_otp(BSEC_OTP_RPN, RPN_SHIFT, RPN_MASK);
}
u32 get_cpu_type(void)
{
u32 id;
id = (read_idc() & DBGMCU_IDC_DEV_ID_MASK) >> DBGMCU_IDC_DEV_ID_SHIFT;
return (id << 16) | get_cpu_rpn();
}
/* Get Package options from OTP */
u32 get_cpu_package(void)
{
return get_otp(BSEC_OTP_PKG, PKG_SHIFT, PKG_MASK);
}
#if defined(CONFIG_DISPLAY_CPUINFO)
int print_cpuinfo(void)
{
char *cpu_s, *cpu_r, *pkg;
/* MPUs Part Numbers */
switch (get_cpu_type()) {
case CPU_STM32MP157Cxx:
cpu_s = "157C";
break;
case CPU_STM32MP157Axx:
cpu_s = "157A";
break;
case CPU_STM32MP153Cxx:
cpu_s = "153C";
break;
case CPU_STM32MP153Axx:
cpu_s = "153A";
break;
case CPU_STM32MP151Cxx:
cpu_s = "151C";
break;
case CPU_STM32MP151Axx:
cpu_s = "151A";
break;
default:
cpu_s = "????";
break;
}
/* Package */
switch (get_cpu_package()) {
case PKG_AA_LBGA448:
pkg = "AA";
break;
case PKG_AB_LBGA354:
pkg = "AB";
break;
case PKG_AC_TFBGA361:
pkg = "AC";
break;
case PKG_AD_TFBGA257:
pkg = "AD";
break;
default:
pkg = "??";
break;
}
/* REVISION */
switch (get_cpu_rev()) {
case CPU_REVA:
cpu_r = "A";
break;
case CPU_REVB:
cpu_r = "B";
break;
default:
cpu_r = "?";
break;
}
printf("CPU: STM32MP%s%s Rev.%s\n", cpu_s, pkg, cpu_r);
return 0;
}
#endif /* CONFIG_DISPLAY_CPUINFO */
static void setup_boot_mode(void)
{
const u32 serial_addr[] = {
STM32_USART1_BASE,
STM32_USART2_BASE,
STM32_USART3_BASE,
STM32_UART4_BASE,
STM32_UART5_BASE,
STM32_USART6_BASE,
STM32_UART7_BASE,
STM32_UART8_BASE
};
char cmd[60];
u32 boot_ctx = readl(TAMP_BOOT_CONTEXT);
u32 boot_mode =
(boot_ctx & TAMP_BOOT_MODE_MASK) >> TAMP_BOOT_MODE_SHIFT;
unsigned int instance = (boot_mode & TAMP_BOOT_INSTANCE_MASK) - 1;
u32 forced_mode = (boot_ctx & TAMP_BOOT_FORCED_MASK);
struct udevice *dev;
int alias;
pr_debug("%s: boot_ctx=0x%x => boot_mode=%x, instance=%d forced=%x\n",
__func__, boot_ctx, boot_mode, instance, forced_mode);
switch (boot_mode & TAMP_BOOT_DEVICE_MASK) {
case BOOT_SERIAL_UART:
if (instance > ARRAY_SIZE(serial_addr))
break;
/* serial : search associated alias in devicetree */
sprintf(cmd, "serial@%x", serial_addr[instance]);
if (uclass_get_device_by_name(UCLASS_SERIAL, cmd, &dev))
break;
if (fdtdec_get_alias_seq(gd->fdt_blob, "serial",
dev_of_offset(dev), &alias))
break;
sprintf(cmd, "%d", alias);
env_set("boot_device", "serial");
env_set("boot_instance", cmd);
/* restore console on uart when not used */
if (gd->cur_serial_dev != dev) {
gd->flags &= ~(GD_FLG_SILENT |
GD_FLG_DISABLE_CONSOLE);
printf("serial boot with console enabled!\n");
}
break;
case BOOT_SERIAL_USB:
env_set("boot_device", "usb");
env_set("boot_instance", "0");
break;
case BOOT_FLASH_SD:
case BOOT_FLASH_EMMC:
sprintf(cmd, "%d", instance);
env_set("boot_device", "mmc");
env_set("boot_instance", cmd);
break;
case BOOT_FLASH_NAND:
env_set("boot_device", "nand");
env_set("boot_instance", "0");
break;
case BOOT_FLASH_NOR:
env_set("boot_device", "nor");
env_set("boot_instance", "0");
break;
default:
pr_debug("unexpected boot mode = %x\n", boot_mode);
break;
}
switch (forced_mode) {
case BOOT_FASTBOOT:
printf("Enter fastboot!\n");
env_set("preboot", "env set preboot; fastboot 0");
break;
case BOOT_STM32PROG:
env_set("boot_device", "usb");
env_set("boot_instance", "0");
break;
case BOOT_UMS_MMC0:
case BOOT_UMS_MMC1:
case BOOT_UMS_MMC2:
printf("Enter UMS!\n");
instance = forced_mode - BOOT_UMS_MMC0;
sprintf(cmd, "env set preboot; ums 0 mmc %d", instance);
env_set("preboot", cmd);
break;
case BOOT_RECOVERY:
env_set("preboot", "env set preboot; run altbootcmd");
break;
case BOOT_NORMAL:
break;
default:
pr_debug("unexpected forced boot mode = %x\n", forced_mode);
break;
}
/* clear TAMP for next reboot */
clrsetbits_le32(TAMP_BOOT_CONTEXT, TAMP_BOOT_FORCED_MASK, BOOT_NORMAL);
}
/*
* If there is no MAC address in the environment, then it will be initialized
* (silently) from the value in the OTP.
*/
static int setup_mac_address(void)
{
#if defined(CONFIG_NET)
int ret;
int i;
u32 otp[2];
uchar enetaddr[6];
struct udevice *dev;
/* MAC already in environment */
if (eth_env_get_enetaddr("ethaddr", enetaddr))
return 0;
ret = uclass_get_device_by_driver(UCLASS_MISC,
DM_GET_DRIVER(stm32mp_bsec),
&dev);
if (ret)
return ret;
ret = misc_read(dev, STM32_BSEC_SHADOW(BSEC_OTP_MAC),
otp, sizeof(otp));
if (ret < 0)
return ret;
for (i = 0; i < 6; i++)
enetaddr[i] = ((uint8_t *)&otp)[i];
if (!is_valid_ethaddr(enetaddr)) {
pr_err("invalid MAC address in OTP %pM\n", enetaddr);
return -EINVAL;
}
pr_debug("OTP MAC address = %pM\n", enetaddr);
ret = !eth_env_set_enetaddr("ethaddr", enetaddr);
if (!ret)
pr_err("Failed to set mac address %pM from OTP: %d\n",
enetaddr, ret);
#endif
return 0;
}
static int setup_serial_number(void)
{
char serial_string[25];
u32 otp[3] = {0, 0, 0 };
struct udevice *dev;
int ret;
if (env_get("serial#"))
return 0;
ret = uclass_get_device_by_driver(UCLASS_MISC,
DM_GET_DRIVER(stm32mp_bsec),
&dev);
if (ret)
return ret;
ret = misc_read(dev, STM32_BSEC_SHADOW(BSEC_OTP_SERIAL),
otp, sizeof(otp));
if (ret < 0)
return ret;
sprintf(serial_string, "%08X%08X%08X", otp[0], otp[1], otp[2]);
env_set("serial#", serial_string);
return 0;
}
int arch_misc_init(void)
{
setup_boot_mode();
setup_mac_address();
setup_serial_number();
return 0;
}