| # SPDX-License-Identifier: GPL-2.0+ |
| # |
| # Copyright (c) 2014 Google, Inc |
| # Copyright (c) 2019 Rockchip Electronics Co., Ltd. |
| |
| # We don't want the bootrom-helper present in a full U-Boot build, as |
| # this may have entered from ATF with the stack-pointer pointing to |
| # inaccessible/protected memory (and the bootrom-helper assumes that |
| # the stack-pointer is valid before switching to the U-Boot stack). |
| obj-spl-$(CONFIG_ROCKCHIP_BROM_HELPER) += bootrom.o |
| obj-spl-$(CONFIG_SPL_ROCKCHIP_COMMON_BOARD) += spl.o spl-boot-order.o |
| obj-tpl-$(CONFIG_ROCKCHIP_BROM_HELPER) += bootrom.o |
| obj-tpl-$(CONFIG_TPL_ROCKCHIP_COMMON_BOARD) += tpl.o |
| |
| obj-spl-$(CONFIG_ROCKCHIP_RK3036) += rk3036-board-spl.o |
| |
| ifeq ($(CONFIG_SPL_BUILD)$(CONFIG_TPL_BUILD),) |
| |
| # Always include boot_mode.o, as we bypass it (i.e. turn it off) |
| # inside of boot_mode.c when CONFIG_BOOT_MODE_REG is 0. This way, |
| # we can have the preprocessor correctly recognise both 0x0 and 0 |
| # meaning "turn it off". |
| obj-y += boot_mode.o |
| obj-$(CONFIG_ROCKCHIP_COMMON_BOARD) += board.o |
| obj-$(CONFIG_MISC_INIT_R) += misc.o |
| endif |
| |
| obj-$(CONFIG_$(SPL_TPL_)RAM) += sdram_common.o |
| |
| obj-$(CONFIG_ROCKCHIP_RK3036) += rk3036/ |
| obj-$(CONFIG_ROCKCHIP_RK3128) += rk3128/ |
| obj-$(CONFIG_ROCKCHIP_RK3188) += rk3188/ |
| obj-$(CONFIG_ROCKCHIP_RK322X) += rk322x/ |
| obj-$(CONFIG_ROCKCHIP_RK3288) += rk3288/ |
| obj-$(CONFIG_ROCKCHIP_RK3328) += rk3328/ |
| obj-$(CONFIG_ROCKCHIP_RK3368) += rk3368/ |
| obj-$(CONFIG_ROCKCHIP_RK3399) += rk3399/ |
| obj-$(CONFIG_ROCKCHIP_RV1108) += rv1108/ |
| |
| # Clear out SPL objects, in case this is a TPL build |
| obj-spl-$(CONFIG_TPL_BUILD) = |
| |
| # Now add SPL/TPL objects back into the main build |
| obj-$(CONFIG_SPL_BUILD) += $(obj-spl-y) |
| obj-$(CONFIG_TPL_BUILD) += $(obj-tpl-y) |
