include/fsl_validate.h - u-boot-mtk - Git at Google

 /* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright 2015 Freescale Semiconductor, Inc.
  */

 #ifndef _FSL_VALIDATE_H_
 #define _FSL_VALIDATE_H_

 #include <fsl_sec.h>
 #include <fsl_sec_mon.h>
 #include <command.h>
 #include <linux/types.h>

 #define WORD_SIZE 4

 /* Minimum and maximum size of RSA signature length in bits */
 #define KEY_SIZE       4096
 #define KEY_SIZE_BYTES (KEY_SIZE/8)
 #define KEY_SIZE_WORDS (KEY_SIZE_BYTES/(WORD_SIZE))

 extern struct jobring jr;

 /* Barker code size in bytes */
 #define ESBC_BARKER_LEN	4	/* barker code length in ESBC uboot client */
 				/* header */

 /* No-error return values */
 #define ESBC_VALID_HDR	0	/* header is valid */

 /* Maximum number of SG entries allowed */
 #define MAX_SG_ENTRIES	8

 /* Different Header Struct for LS-CH3 */
 #ifdef CONFIG_ESBC_HDR_LS
 struct fsl_secboot_img_hdr {
 	u8 barker[ESBC_BARKER_LEN];	/* barker code */
 	u32 srk_tbl_off;
 	struct {
 		u8 num_srk;
 		u8 srk_sel;
 		u8 reserve;
 	} len_kr;
 	u8 ie_flag;

 	u32 uid_flag;

 	u32 psign;		/* signature offset */
 	u32 sign_len;		/* length of the signature in bytes */

 	u64 pimg64;		/* 64 bit pointer to ESBC Image */
 	u32 img_size;		/* ESBC client image size in bytes */
 	u32 ie_key_sel;

 	u32 fsl_uid_0;
 	u32 fsl_uid_1;
 	u32 oem_uid_0;
 	u32 oem_uid_1;
 	u32 oem_uid_2;
 	u32 oem_uid_3;
 	u32 oem_uid_4;
 	u32 reserved1[3];
 };

 #ifdef CONFIG_KEY_REVOCATION
 /* Srk table and key revocation check */
 #define UNREVOCABLE_KEY	8
 #define ALIGN_REVOC_KEY 7
 #define MAX_KEY_ENTRIES 8
 #endif

 #if defined(CONFIG_FSL_ISBC_KEY_EXT)
 #define IE_FLAG_MASK 0x1
 #define SCRATCH_IE_LOW_ADR 13
 #define SCRATCH_IE_HIGH_ADR 14
 #endif

 #else /* CONFIG_ESBC_HDR_LS */

 /*
  * ESBC uboot client header structure.
  * The struct contain the following fields
  * barker code
  * public key offset
  * pub key length
  * signature offset
  * length of the signature
  * ptr to SG table
  * no of entries in SG table
  * esbc ptr
  * size of esbc
  * esbc entry point
  * Scatter gather flag
  * UID flag
  * FSL UID
  * OEM UID
  * Here, pub key is modulus concatenated with exponent
  * of equal length
  */
 struct fsl_secboot_img_hdr {
 	u8 barker[ESBC_BARKER_LEN];	/* barker code */
 	union {
 		u32 pkey;		/* public key offset */
 #ifdef CONFIG_KEY_REVOCATION
 		u32 srk_tbl_off;
 #endif
 	};

 	union {
 		u32 key_len;		/* pub key length in bytes */
 #ifdef CONFIG_KEY_REVOCATION
 		struct {
 			u32 srk_table_flag:8;
 			u32 srk_sel:8;
 			u32 num_srk:16;
 		} len_kr;
 #endif
 	};

 	u32 psign;		/* signature offset */
 	u32 sign_len;		/* length of the signature in bytes */
 	union {
 		u32 psgtable;	/* ptr to SG table */
 #ifndef CONFIG_ESBC_ADDR_64BIT
 		u32 pimg;	/* ptr to ESBC client image */
 #endif
 	};
 	union {
 		u32 sg_entries;	/* no of entries in SG table */
 		u32 img_size;	/* ESBC client image size in bytes */
 	};
 	u32 img_start;		/* ESBC client entry point */
 	u32 sg_flag;		/* Scatter gather flag */
 	u32 uid_flag;
 	u32 fsl_uid_0;
 	u32 oem_uid_0;
 	u32 reserved1[2];
 	u32 fsl_uid_1;
 	u32 oem_uid_1;
 	union {
 		u32 reserved2[2];
 #ifdef CONFIG_ESBC_ADDR_64BIT
 		u64 pimg64;	/* 64 bit pointer to ESBC Image */
 #endif
 	};
 	u32 ie_flag;
 	u32 ie_key_sel;
 };

 #ifdef CONFIG_KEY_REVOCATION
 /* Srk table and key revocation check */
 #define SRK_FLAG	0x01
 #define UNREVOCABLE_KEY	4
 #define ALIGN_REVOC_KEY 3
 #define MAX_KEY_ENTRIES 4
 #endif

 #if defined(CONFIG_FSL_ISBC_KEY_EXT)
 #define IE_FLAG_MASK 0xFFFFFFFF
 #endif

 #endif /* CONFIG_ESBC_HDR_LS */


 #if defined(CONFIG_FSL_ISBC_KEY_EXT)
 struct ie_key_table {
 	u32 key_len;
 	u8 pkey[2 * KEY_SIZE_BYTES];
 };

 struct ie_key_info {
 	uint32_t key_revok;
 	uint32_t num_keys;
 	struct ie_key_table ie_key_tbl[32];
 };
 #endif

 #ifdef CONFIG_KEY_REVOCATION
 struct srk_table {
 	u32 key_len;
 	u8 pkey[2 * KEY_SIZE_BYTES];
 };
 #endif

 /*
  * SG table.
  */
 #if defined(CONFIG_FSL_TRUST_ARCH_v1) && defined(CONFIG_FSL_CORENET)
 /*
  * This struct contains the following fields
  * length of the segment
  * source address
  */
 struct fsl_secboot_sg_table {
 	u32 len;		/* length of the segment in bytes */
 	u32 src_addr;		/* ptr to the data segment */
 };
 #else
 /*
  * This struct contains the following fields
  * length of the segment
  * Destination Target ID
  * source address
  * destination address
  */
 struct fsl_secboot_sg_table {
 	u32 len;
 	u32 trgt_id;
 	u32 src_addr;
 	u32 dst_addr;
 };
 #endif

 /* ESBC global structure.
  * Data to be used across verification of different images.
  * Stores follwoing Data:
  * IE Table
  */
 struct fsl_secboot_glb {
 #if defined(CONFIG_FSL_ISBC_KEY_EXT)
 	uintptr_t ie_addr;
 	struct ie_key_info ie_tbl;
 #endif
 };
 /*
  * ESBC private structure.
  * Private structure used by ESBC to store following fields
  * ESBC client key
  * ESBC client key hash
  * ESBC client Signature
  * Encoded hash recovered from signature
  * Encoded hash of ESBC client header plus ESBC client image
  */
 struct fsl_secboot_img_priv {
 	uint32_t hdr_location;
 	uintptr_t ie_addr;
 	u32 key_len;
 	struct fsl_secboot_img_hdr hdr;

 	u8 img_key[2 * KEY_SIZE_BYTES];	/* ESBC client key */
 	u8 img_key_hash[32];	/* ESBC client key hash */

 #ifdef CONFIG_KEY_REVOCATION
 	struct srk_table srk_tbl[MAX_KEY_ENTRIES];
 #endif
 	u8 img_sign[KEY_SIZE_BYTES];		/* ESBC client signature */

 	u8 img_encoded_hash[KEY_SIZE_BYTES];	/* EM wrt RSA PKCSv1.5  */
 						/* Includes hash recovered after
 						 * signature verification
 						 */

 	u8 img_encoded_hash_second[KEY_SIZE_BYTES];/* EM' wrt RSA PKCSv1.5 */
 						/* Includes hash of
 						 * ESBC client header plus
 						 * ESBC client image
 						 */

 	struct fsl_secboot_sg_table sgtbl[MAX_SG_ENTRIES];	/* SG table */
 	uintptr_t ehdrloc;	/* ESBC Header location */
 	uintptr_t *img_addr_ptr;	/* ESBC Image Location */
 	uint32_t img_size;	/* ESBC Image Size */
 };

 int do_esbc_halt(cmd_tbl_t *cmdtp, int flag, int argc,
 				char * const argv[]);

 int fsl_secboot_validate(uintptr_t haddr, char *arg_hash_str,
 	uintptr_t *img_addr_ptr);
 int fsl_secboot_blob_encap(cmd_tbl_t *cmdtp, int flag, int argc,
 	char * const argv[]);
 int fsl_secboot_blob_decap(cmd_tbl_t *cmdtp, int flag, int argc,
 	char * const argv[]);

 int fsl_check_boot_mode_secure(void);
 int fsl_setenv_chain_of_trust(void);

 /*
  * This function is used to validate the main U-boot binary from
  * SPL just before passing control to it using QorIQ Trust
  * Architecture header (appended to U-boot image).
  */
 void spl_validate_uboot(uint32_t hdr_addr, uintptr_t img_addr);
 #endif
	/* SPDX-License-Identifier: GPL-2.0+ */
	/*
	* Copyright 2015 Freescale Semiconductor, Inc.
	*/

	#ifndef _FSL_VALIDATE_H_
	#define _FSL_VALIDATE_H_

	#include <fsl_sec.h>
	#include <fsl_sec_mon.h>
	#include <command.h>
	#include <linux/types.h>

	#define WORD_SIZE 4

	/* Minimum and maximum size of RSA signature length in bits */
	#define KEY_SIZE 4096
	#define KEY_SIZE_BYTES (KEY_SIZE/8)
	#define KEY_SIZE_WORDS (KEY_SIZE_BYTES/(WORD_SIZE))

	extern struct jobring jr;

	/* Barker code size in bytes */
	#define ESBC_BARKER_LEN 4 /* barker code length in ESBC uboot client */
	/* header */

	/* No-error return values */
	#define ESBC_VALID_HDR 0 /* header is valid */

	/* Maximum number of SG entries allowed */
	#define MAX_SG_ENTRIES 8

	/* Different Header Struct for LS-CH3 */
	#ifdef CONFIG_ESBC_HDR_LS
	struct fsl_secboot_img_hdr {
	u8 barker[ESBC_BARKER_LEN]; /* barker code */
	u32 srk_tbl_off;
	struct {
	u8 num_srk;
	u8 srk_sel;
	u8 reserve;
	} len_kr;
	u8 ie_flag;

	u32 uid_flag;

	u32 psign; /* signature offset */
	u32 sign_len; /* length of the signature in bytes */

	u64 pimg64; /* 64 bit pointer to ESBC Image */
	u32 img_size; /* ESBC client image size in bytes */
	u32 ie_key_sel;

	u32 fsl_uid_0;
	u32 fsl_uid_1;
	u32 oem_uid_0;
	u32 oem_uid_1;
	u32 oem_uid_2;
	u32 oem_uid_3;
	u32 oem_uid_4;
	u32 reserved1[3];
	};

	#ifdef CONFIG_KEY_REVOCATION
	/* Srk table and key revocation check */
	#define UNREVOCABLE_KEY 8
	#define ALIGN_REVOC_KEY 7
	#define MAX_KEY_ENTRIES 8
	#endif

	#if defined(CONFIG_FSL_ISBC_KEY_EXT)
	#define IE_FLAG_MASK 0x1
	#define SCRATCH_IE_LOW_ADR 13
	#define SCRATCH_IE_HIGH_ADR 14
	#endif

	#else /* CONFIG_ESBC_HDR_LS */

	/*
	* ESBC uboot client header structure.
	* The struct contain the following fields
	* barker code
	* public key offset
	* pub key length
	* signature offset
	* length of the signature
	* ptr to SG table
	* no of entries in SG table
	* esbc ptr
	* size of esbc
	* esbc entry point
	* Scatter gather flag
	* UID flag
	* FSL UID
	* OEM UID
	* Here, pub key is modulus concatenated with exponent
	* of equal length
	*/
	struct fsl_secboot_img_hdr {
	u8 barker[ESBC_BARKER_LEN]; /* barker code */
	union {
	u32 pkey; /* public key offset */
	#ifdef CONFIG_KEY_REVOCATION
	u32 srk_tbl_off;
	#endif
	};

	union {
	u32 key_len; /* pub key length in bytes */
	#ifdef CONFIG_KEY_REVOCATION
	struct {
	u32 srk_table_flag:8;
	u32 srk_sel:8;
	u32 num_srk:16;
	} len_kr;
	#endif
	};

	u32 psign; /* signature offset */
	u32 sign_len; /* length of the signature in bytes */
	union {
	u32 psgtable; /* ptr to SG table */
	#ifndef CONFIG_ESBC_ADDR_64BIT
	u32 pimg; /* ptr to ESBC client image */
	#endif
	};
	union {
	u32 sg_entries; /* no of entries in SG table */
	u32 img_size; /* ESBC client image size in bytes */
	};
	u32 img_start; /* ESBC client entry point */
	u32 sg_flag; /* Scatter gather flag */
	u32 uid_flag;
	u32 fsl_uid_0;
	u32 oem_uid_0;
	u32 reserved1[2];
	u32 fsl_uid_1;
	u32 oem_uid_1;
	union {
	u32 reserved2[2];
	#ifdef CONFIG_ESBC_ADDR_64BIT
	u64 pimg64; /* 64 bit pointer to ESBC Image */
	#endif
	};
	u32 ie_flag;
	u32 ie_key_sel;
	};

	#ifdef CONFIG_KEY_REVOCATION
	/* Srk table and key revocation check */
	#define SRK_FLAG 0x01
	#define UNREVOCABLE_KEY 4
	#define ALIGN_REVOC_KEY 3
	#define MAX_KEY_ENTRIES 4
	#endif

	#if defined(CONFIG_FSL_ISBC_KEY_EXT)
	#define IE_FLAG_MASK 0xFFFFFFFF
	#endif

	#endif /* CONFIG_ESBC_HDR_LS */


	#if defined(CONFIG_FSL_ISBC_KEY_EXT)
	struct ie_key_table {
	u32 key_len;
	u8 pkey[2 * KEY_SIZE_BYTES];
	};

	struct ie_key_info {
	uint32_t key_revok;
	uint32_t num_keys;
	struct ie_key_table ie_key_tbl[32];
	};
	#endif

	#ifdef CONFIG_KEY_REVOCATION
	struct srk_table {
	u32 key_len;
	u8 pkey[2 * KEY_SIZE_BYTES];
	};
	#endif

	/*
	* SG table.
	*/
	#if defined(CONFIG_FSL_TRUST_ARCH_v1) && defined(CONFIG_FSL_CORENET)
	/*
	* This struct contains the following fields
	* length of the segment
	* source address
	*/
	struct fsl_secboot_sg_table {
	u32 len; /* length of the segment in bytes */
	u32 src_addr; /* ptr to the data segment */
	};
	#else
	/*
	* This struct contains the following fields
	* length of the segment
	* Destination Target ID
	* source address
	* destination address
	*/
	struct fsl_secboot_sg_table {
	u32 len;
	u32 trgt_id;
	u32 src_addr;
	u32 dst_addr;
	};
	#endif

	/* ESBC global structure.
	* Data to be used across verification of different images.
	* Stores follwoing Data:
	* IE Table
	*/
	struct fsl_secboot_glb {
	#if defined(CONFIG_FSL_ISBC_KEY_EXT)
	uintptr_t ie_addr;
	struct ie_key_info ie_tbl;
	#endif
	};
	/*
	* ESBC private structure.
	* Private structure used by ESBC to store following fields
	* ESBC client key
	* ESBC client key hash
	* ESBC client Signature
	* Encoded hash recovered from signature
	* Encoded hash of ESBC client header plus ESBC client image
	*/
	struct fsl_secboot_img_priv {
	uint32_t hdr_location;
	uintptr_t ie_addr;
	u32 key_len;
	struct fsl_secboot_img_hdr hdr;

	u8 img_key[2 * KEY_SIZE_BYTES]; /* ESBC client key */
	u8 img_key_hash[32]; /* ESBC client key hash */

	#ifdef CONFIG_KEY_REVOCATION
	struct srk_table srk_tbl[MAX_KEY_ENTRIES];
	#endif
	u8 img_sign[KEY_SIZE_BYTES]; /* ESBC client signature */

	u8 img_encoded_hash[KEY_SIZE_BYTES]; /* EM wrt RSA PKCSv1.5 */
	/* Includes hash recovered after
	* signature verification
	*/

	u8 img_encoded_hash_second[KEY_SIZE_BYTES];/* EM' wrt RSA PKCSv1.5 */
	/* Includes hash of
	* ESBC client header plus
	* ESBC client image
	*/

	struct fsl_secboot_sg_table sgtbl[MAX_SG_ENTRIES]; /* SG table */
	uintptr_t ehdrloc; /* ESBC Header location */
	uintptr_t img_addr_ptr; / ESBC Image Location */
	uint32_t img_size; /* ESBC Image Size */
	};

	int do_esbc_halt(cmd_tbl_t *cmdtp, int flag, int argc,
	char * const argv[]);

	int fsl_secboot_validate(uintptr_t haddr, char *arg_hash_str,
	uintptr_t *img_addr_ptr);
	int fsl_secboot_blob_encap(cmd_tbl_t *cmdtp, int flag, int argc,
	char * const argv[]);
	int fsl_secboot_blob_decap(cmd_tbl_t *cmdtp, int flag, int argc,
	char * const argv[]);

	int fsl_check_boot_mode_secure(void);
	int fsl_setenv_chain_of_trust(void);

	/*
	* This function is used to validate the main U-boot binary from
	* SPL just before passing control to it using QorIQ Trust
	* Architecture header (appended to U-boot image).
	*/
	void spl_validate_uboot(uint32_t hdr_addr, uintptr_t img_addr);
	#endif