| /* SPDX-License-Identifier: GPL-2.0+ */ |
| /* |
| * Copyright (C) 2014 Evgeni Dobrev <evgeni@studio-punkt.com> |
| * |
| * based on work from: |
| * (C) Copyright 2009 |
| * Marvell Semiconductor <www.marvell.com> |
| * Written-by: Prafulla Wadaskar <prafulla@marvell.com> |
| */ |
| |
| #ifndef _CONFIG_NAS220_H |
| #define _CONFIG_NAS220_H |
| |
| /* |
| * Machine type ID |
| */ |
| #define CONFIG_MACH_TYPE MACH_TYPE_RD88F6192_NAS |
| |
| /* |
| * High Level Configuration Options (easy to change) |
| */ |
| #define CONFIG_FEROCEON_88FR131 /* #define CPU Core subversion */ |
| #define CONFIG_KW88F6192 /* SOC Name */ |
| #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ |
| |
| /* power-on led, regulator, sata0, sata1 */ |
| #define NAS220_GE_OE_VAL_LOW ((1 << 12)|(1 << 14)|(1 << 24)|(1 << 28)) |
| #define NAS220_GE_OE_VAL_HIGH (0) |
| #define NAS220_GE_OE_LOW (~((1 << 12)|(1 << 14)|(1 << 24)|(1 << 28))) |
| #define NAS220_GE_OE_HIGH (~(0)) |
| |
| /* PHY related */ |
| #define MV88E1116_LED_FCTRL_REG 10 |
| #define MV88E1116_CPRSP_CR3_REG 21 |
| #define MV88E1116_MAC_CTRL_REG 21 |
| #define MV88E1116_PGADR_REG 22 |
| #define MV88E1116_RGMII_TXTM_CTRL (1 << 4) |
| #define MV88E1116_RGMII_RXTM_CTRL (1 << 5) |
| |
| /* |
| * Commands configuration |
| */ |
| |
| /* |
| * mv-common.h should be defined after CMD configs since it used them |
| * to enable certain macros |
| */ |
| #include "mv-common.h" |
| |
| /* |
| * Environment variables configurations |
| */ |
| #ifdef CONFIG_CMD_NAND |
| #define CONFIG_ENV_SECT_SIZE 0x10000 |
| #endif |
| |
| #define CONFIG_ENV_SIZE 0x10000 |
| #define CONFIG_ENV_OFFSET 0xa0000 |
| |
| /* |
| * Default environment variables |
| */ |
| #define CONFIG_BOOTCOMMAND "" |
| |
| #define CONFIG_EXTRA_ENV_SETTINGS \ |
| "bootargs=console=ttyS0,115200\0" \ |
| "mtdparts=mtdparts=orion_nand:0xa0000@0x0(uboot),"\ |
| "0x010000@0xa0000(env),"\ |
| "0x500000@0xc0000(uimage),"\ |
| "0x1a40000@0x5c0000(rootfs)\0" \ |
| "mtdids=nand0=orion_nand\0"\ |
| "autostart=no\0"\ |
| "autoload=no\0" |
| |
| /* |
| * Ethernet Driver configuration |
| */ |
| #ifdef CONFIG_CMD_NET |
| #define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ |
| #define CONFIG_PHY_BASE_ADR 8 |
| #endif /* CONFIG_CMD_NET */ |
| |
| /* |
| * USB/EHCI |
| */ |
| #ifdef CONFIG_CMD_USB |
| #define CONFIG_USB_EHCI_KIRKWOOD /* on Kirkwood platform */ |
| #define CONFIG_EHCI_IS_TDI |
| #endif /* CONFIG_CMD_USB */ |
| |
| /* |
| * File system |
| */ |
| #define CONFIG_JFFS2_NAND |
| #define CONFIG_JFFS2_LZO |
| |
| /* |
| * SATA |
| */ |
| #ifdef CONFIG_MVSATA_IDE |
| #define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET |
| #define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET |
| #endif |
| |
| /* |
| * EFI partition |
| */ |
| |
| #define CONFIG_KIRKWOOD_GPIO |
| |
| #endif /* _CONFIG_NAS220_H */ |
| |
