| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright (C) 2015-2016 Marvell International Ltd. |
| * |
| * Copyright (C) 2016 Stefan Roese <sr@denx.de> |
| */ |
| |
| #include <common.h> |
| #include <dm.h> |
| #include <fdtdec.h> |
| #include <linux/errno.h> |
| #include <asm/io.h> |
| |
| #include "comphy_core.h" |
| |
| #define COMPHY_MAX_CHIP 4 |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| static const char *get_speed_string(u32 speed) |
| { |
| static const char * const speed_strings[] = { |
| "1.25 Gbps", "1.5 Gbps", "2.5 Gbps", |
| "3.0 Gbps", "3.125 Gbps", "5 Gbps", "6 Gbps", |
| "6.25 Gbps", "10.31 Gbps" |
| }; |
| |
| if (speed < 0 || speed > PHY_SPEED_MAX) |
| return "invalid"; |
| |
| return speed_strings[speed]; |
| } |
| |
| static const char *get_type_string(u32 type) |
| { |
| static const char * const type_strings[] = { |
| "UNCONNECTED", "PEX0", "PEX1", "PEX2", "PEX3", |
| "SATA0", "SATA1", "SATA2", "SATA3", "SGMII0", |
| "SGMII1", "SGMII2", "SGMII3", "QSGMII", |
| "USB3_HOST0", "USB3_HOST1", "USB3_DEVICE", |
| "XAUI0", "XAUI1", "XAUI2", "XAUI3", |
| "RXAUI0", "RXAUI1", "SFI", "IGNORE" |
| }; |
| |
| if (type < 0 || type > PHY_TYPE_MAX) |
| return "invalid"; |
| |
| return type_strings[type]; |
| } |
| |
| void comphy_print(struct chip_serdes_phy_config *chip_cfg, |
| struct comphy_map *comphy_map_data) |
| { |
| u32 lane; |
| |
| for (lane = 0; lane < chip_cfg->comphy_lanes_count; |
| lane++, comphy_map_data++) { |
| if (comphy_map_data->speed == PHY_SPEED_INVALID) { |
| printf("Comphy-%d: %-13s\n", lane, |
| get_type_string(comphy_map_data->type)); |
| } else { |
| printf("Comphy-%d: %-13s %-10s\n", lane, |
| get_type_string(comphy_map_data->type), |
| get_speed_string(comphy_map_data->speed)); |
| } |
| } |
| } |
| |
| __weak int comphy_update_map(struct comphy_map *serdes_map, int count) |
| { |
| return 0; |
| } |
| |
| static int comphy_probe(struct udevice *dev) |
| { |
| const void *blob = gd->fdt_blob; |
| int node = dev_of_offset(dev); |
| struct chip_serdes_phy_config *chip_cfg = dev_get_priv(dev); |
| struct comphy_map comphy_map_data[MAX_LANE_OPTIONS]; |
| int subnode; |
| int lane; |
| int last_idx = 0; |
| static int current_idx; |
| int res; |
| |
| /* Save base addresses for later use */ |
| chip_cfg->comphy_base_addr = (void *)devfdt_get_addr_index(dev, 0); |
| if (IS_ERR(chip_cfg->comphy_base_addr)) |
| return PTR_ERR(chip_cfg->comphy_base_addr); |
| |
| chip_cfg->hpipe3_base_addr = (void *)devfdt_get_addr_index(dev, 1); |
| if (IS_ERR(chip_cfg->hpipe3_base_addr)) |
| return PTR_ERR(chip_cfg->hpipe3_base_addr); |
| |
| chip_cfg->comphy_lanes_count = fdtdec_get_int(blob, node, |
| "max-lanes", 0); |
| if (chip_cfg->comphy_lanes_count <= 0) { |
| dev_err(&dev->dev, "comphy max lanes is wrong\n"); |
| return -EINVAL; |
| } |
| |
| chip_cfg->comphy_mux_bitcount = fdtdec_get_int(blob, node, |
| "mux-bitcount", 0); |
| if (chip_cfg->comphy_mux_bitcount <= 0) { |
| dev_err(&dev->dev, "comphy mux bit count is wrong\n"); |
| return -EINVAL; |
| } |
| |
| chip_cfg->comphy_mux_lane_order = |
| fdtdec_locate_array(blob, node, "mux-lane-order", |
| chip_cfg->comphy_lanes_count); |
| |
| if (device_is_compatible(dev, "marvell,comphy-armada-3700")) |
| chip_cfg->ptr_comphy_chip_init = comphy_a3700_init; |
| |
| if (device_is_compatible(dev, "marvell,comphy-cp110")) |
| chip_cfg->ptr_comphy_chip_init = comphy_cp110_init; |
| |
| /* |
| * Bail out if no chip_init function is defined, e.g. no |
| * compatible node is found |
| */ |
| if (!chip_cfg->ptr_comphy_chip_init) { |
| dev_err(&dev->dev, "comphy: No compatible DT node found\n"); |
| return -ENODEV; |
| } |
| |
| lane = 0; |
| fdt_for_each_subnode(subnode, blob, node) { |
| /* Skip disabled ports */ |
| if (!fdtdec_get_is_enabled(blob, subnode)) |
| continue; |
| |
| comphy_map_data[lane].speed = fdtdec_get_int( |
| blob, subnode, "phy-speed", PHY_TYPE_INVALID); |
| comphy_map_data[lane].type = fdtdec_get_int( |
| blob, subnode, "phy-type", PHY_SPEED_INVALID); |
| comphy_map_data[lane].invert = fdtdec_get_int( |
| blob, subnode, "phy-invert", PHY_POLARITY_NO_INVERT); |
| comphy_map_data[lane].clk_src = fdtdec_get_bool(blob, subnode, |
| "clk-src"); |
| comphy_map_data[lane].end_point = fdtdec_get_bool(blob, subnode, |
| "end_point"); |
| if (comphy_map_data[lane].type == PHY_TYPE_INVALID) { |
| printf("no phy type for lane %d, setting lane as unconnected\n", |
| lane + 1); |
| } |
| |
| lane++; |
| } |
| |
| res = comphy_update_map(comphy_map_data, chip_cfg->comphy_lanes_count); |
| if (res < 0) |
| return res; |
| |
| /* Save CP index for MultiCP devices (A8K) */ |
| chip_cfg->cp_index = current_idx++; |
| /* PHY power UP sequence */ |
| chip_cfg->ptr_comphy_chip_init(chip_cfg, comphy_map_data); |
| /* PHY print SerDes status */ |
| if (of_machine_is_compatible("marvell,armada8040")) |
| printf("Comphy chip #%d:\n", chip_cfg->cp_index); |
| comphy_print(chip_cfg, comphy_map_data); |
| |
| /* |
| * Only run the dedicated PHY init code once, in the last PHY init call |
| */ |
| if (of_machine_is_compatible("marvell,armada8040")) |
| last_idx = 1; |
| |
| if (chip_cfg->cp_index == last_idx) { |
| /* Initialize dedicated PHYs (not muxed SerDes lanes) */ |
| comphy_dedicated_phys_init(); |
| } |
| |
| return 0; |
| } |
| |
| static const struct udevice_id comphy_ids[] = { |
| { .compatible = "marvell,mvebu-comphy" }, |
| { } |
| }; |
| |
| U_BOOT_DRIVER(mvebu_comphy) = { |
| .name = "mvebu_comphy", |
| .id = UCLASS_MISC, |
| .of_match = comphy_ids, |
| .probe = comphy_probe, |
| .priv_auto_alloc_size = sizeof(struct chip_serdes_phy_config), |
| }; |