blob: 3e8ea3852959addb62e032480ddfd45505df0fea [file] [log] [blame]
menu "mpc8xx CPU"
depends on MPC8xx
config SYS_CPU
default "mpc8xx"
choice
prompt "Target select"
optional
config TARGET_MCR3000
bool "Support MCR3000 board from CSSI"
endchoice
choice
prompt "CPU select"
default MPC866
config MPC866
bool "MPC866"
config MPC885
bool "MPC885"
endchoice
#config MPC8xx_WATCHDOG
# bool "Watchdog"
# select HW_WATCHDOG
config 8xx_GCLK_FREQ
int "CPU GCLK Frequency"
comment "Specific commands"
config CMD_IMMAP
bool "Enable various commands to dump IMMR information"
help
This enables various commands such as:
siuinfo - print System Interface Unit (SIU) registers
memcinfo - print Memory Controller registers
comment "Configuration Registers"
config SYS_SIUMCR
hex "SIUMCR register"
help
SIU Module Configuration (11-6)
config SYS_SYPCR
hex "SYPCR register"
help
System Protection Control (11-9)
config SYS_TBSCR
hex "TBSCR register"
help
Time Base Status and Control (11-26)
config SYS_PISCR
hex "PISCR register"
help
Periodic Interrupt Status and Control (11-31)
config SYS_PLPRCR_BOOL
bool "Customise PLPRCR"
config SYS_PLPRCR
hex "PLPRCR register"
depends on SYS_PLPRCR_BOOL
help
PLL, Low-Power, and Reset Control Register (15-30)
config SYS_SCCR
hex "SCCR register"
help
System Clock and reset Control Register (15-27)
config SYS_SCCR_MASK
hex "MASK for setting SCCR register"
config SYS_DER
hex "DER register"
help
Debug Event Register (37-47)
comment "Memory mapping"
config SYS_BR0_PRELIM
hex "Preliminary value for BR0"
config SYS_OR0_PRELIM
hex "Preliminary value for OR0"
config SYS_BR1_PRELIM_BOOL
bool "Define Bank 1"
config SYS_BR1_PRELIM
hex "Preliminary value for BR1"
depends on SYS_BR1_PRELIM_BOOL
config SYS_OR1_PRELIM
hex "Preliminary value for OR1"
depends on SYS_BR1_PRELIM_BOOL
config SYS_BR2_PRELIM_BOOL
bool "Define Bank 2"
config SYS_BR2_PRELIM
hex "Preliminary value for BR2"
depends on SYS_BR2_PRELIM_BOOL
config SYS_OR2_PRELIM
hex "Preliminary value for OR2"
depends on SYS_BR2_PRELIM_BOOL
config SYS_BR3_PRELIM_BOOL
bool "Define Bank 3"
config SYS_BR3_PRELIM
hex "Preliminary value for BR3"
depends on SYS_BR3_PRELIM_BOOL
config SYS_OR3_PRELIM
hex "Preliminary value for OR3"
depends on SYS_BR3_PRELIM_BOOL
config SYS_BR4_PRELIM_BOOL
bool "Define Bank 4"
config SYS_BR4_PRELIM
hex "Preliminary value for BR4"
depends on SYS_BR4_PRELIM_BOOL
config SYS_OR4_PRELIM
hex "Preliminary value for OR4"
depends on SYS_BR4_PRELIM_BOOL
config SYS_BR5_PRELIM_BOOL
bool "Define Bank 5"
config SYS_BR5_PRELIM
hex "Preliminary value for BR5"
depends on SYS_BR5_PRELIM_BOOL
config SYS_OR5_PRELIM
hex "Preliminary value for OR5"
depends on SYS_BR5_PRELIM_BOOL
config SYS_BR6_PRELIM_BOOL
bool "Define Bank 6"
config SYS_BR6_PRELIM
hex "Preliminary value for BR6"
depends on SYS_BR6_PRELIM_BOOL
config SYS_OR6_PRELIM
hex "Preliminary value for OR6"
depends on SYS_BR6_PRELIM_BOOL
config SYS_BR7_PRELIM_BOOL
bool "Define Bank 7"
config SYS_BR7_PRELIM
hex "Preliminary value for BR7"
depends on SYS_BR7_PRELIM_BOOL
config SYS_OR7_PRELIM
hex "Preliminary value for OR7"
depends on SYS_BR7_PRELIM_BOOL
config SYS_IMMR
hex "Value for IMMR"
source "board/cssi/MCR3000/Kconfig"
endmenu