blob: 487dfe985957959be1c95b1b4f812ac1f91357a2 [file] [log] [blame]
/* SPDX-License-Identifier: GPL-2.0+ */
/*
* TI K3 AM65x NAVSS Ring accelerator Manager (RA) subsystem driver
*
* Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com
*/
#ifndef __SOC_TI_K3_NAVSS_RINGACC_API_H_
#define __SOC_TI_K3_NAVSS_RINGACC_API_H_
#include <dm/ofnode.h>
/**
* enum k3_nav_ring_mode - &struct k3_nav_ring_cfg mode
*
* RA ring operational modes
*
* @K3_NAV_RINGACC_RING_MODE_RING: Exposed Ring mode for SW direct access
* @K3_NAV_RINGACC_RING_MODE_MESSAGE: Messaging mode. Messaging mode requires
* that all accesses to the queue must go through this IP so that all
* accesses to the memory are controlled and ordered. This IP then
* controls the entire state of the queue, and SW has no directly control,
* such as through doorbells and cannot access the storage memory directly.
* This is particularly useful when more than one SW or HW entity can be
* the producer and/or consumer at the same time
* @K3_NAV_RINGACC_RING_MODE_CREDENTIALS: Credentials mode is message mode plus
* stores credentials with each message, requiring the element size to be
* doubled to fit the credentials. Any exposed memory should be protected
* by a firewall from unwanted access
* @K3_NAV_RINGACC_RING_MODE_QM: Queue manager mode. This takes the credentials
* mode and adds packet length per element, along with additional read only
* fields for element count and accumulated queue length. The QM mode only
* operates with an 8 byte element size (any other element size is
* illegal), and like in credentials mode each operation uses 2 element
* slots to store the credentials and length fields
*/
enum k3_nav_ring_mode {
K3_NAV_RINGACC_RING_MODE_RING = 0,
K3_NAV_RINGACC_RING_MODE_MESSAGE,
K3_NAV_RINGACC_RING_MODE_CREDENTIALS,
K3_NAV_RINGACC_RING_MODE_QM,
k3_NAV_RINGACC_RING_MODE_INVALID
};
/**
* enum k3_nav_ring_size - &struct k3_nav_ring_cfg elm_size
*
* RA ring element's sizes in bytes.
*/
enum k3_nav_ring_size {
K3_NAV_RINGACC_RING_ELSIZE_4 = 0,
K3_NAV_RINGACC_RING_ELSIZE_8,
K3_NAV_RINGACC_RING_ELSIZE_16,
K3_NAV_RINGACC_RING_ELSIZE_32,
K3_NAV_RINGACC_RING_ELSIZE_64,
K3_NAV_RINGACC_RING_ELSIZE_128,
K3_NAV_RINGACC_RING_ELSIZE_256,
K3_NAV_RINGACC_RING_ELSIZE_INVALID
};
struct k3_nav_ringacc;
struct k3_nav_ring;
/**
* enum k3_nav_ring_cfg - RA ring configuration structure
*
* @size: Ring size, number of elements
* @elm_size: Ring element size
* @mode: Ring operational mode
* @flags: Ring configuration flags. Possible values:
* @K3_NAV_RINGACC_RING_SHARED: when set allows to request the same ring
* few times. It's usable when the same ring is used as Free Host PD ring
* for different flows, for example.
* Note: Locking should be done by consumer if required
*/
struct k3_nav_ring_cfg {
u32 size;
enum k3_nav_ring_size elm_size;
enum k3_nav_ring_mode mode;
#define K3_NAV_RINGACC_RING_SHARED BIT(1)
u32 flags;
};
#define K3_NAV_RINGACC_RING_ID_ANY (-1)
#define K3_NAV_RINGACC_RING_USE_PROXY BIT(1)
/**
* k3_nav_ringacc_request_ring - request ring from ringacc
* @ringacc: pointer on ringacc
* @id: ring id or K3_NAV_RINGACC_RING_ID_ANY for any general purpose ring
* @flags:
* @K3_NAV_RINGACC_RING_USE_PROXY: if set - proxy will be allocated and
* used to access ring memory. Sopported only for rings in
* Message/Credentials/Queue mode.
*
* Returns pointer on the Ring - struct k3_nav_ring
* or NULL in case of failure.
*/
struct k3_nav_ring *k3_nav_ringacc_request_ring(struct k3_nav_ringacc *ringacc,
int id, u32 flags);
/**
* k3_nav_ringacc_get_dev - get pointer on RA device
* @ringacc: pointer on RA
*
* Returns device pointer
*/
struct udevice *k3_nav_ringacc_get_dev(struct k3_nav_ringacc *ringacc);
/**
* k3_nav_ringacc_ring_reset - ring reset
* @ring: pointer on Ring
*
* Resets ring internal state ((hw)occ, (hw)idx).
* TODO_GS: ? Ring can be reused without reconfiguration
*/
void k3_nav_ringacc_ring_reset(struct k3_nav_ring *ring);
/**
* k3_nav_ringacc_ring_reset - ring reset for DMA rings
* @ring: pointer on Ring
*
* Resets ring internal state ((hw)occ, (hw)idx). Should be used for rings
* which are read by K3 UDMA, like TX or Free Host PD rings.
*/
void k3_nav_ringacc_ring_reset_dma(struct k3_nav_ring *ring, u32 occ);
/**
* k3_nav_ringacc_ring_free - ring free
* @ring: pointer on Ring
*
* Resets ring and free all alocated resources.
*/
int k3_nav_ringacc_ring_free(struct k3_nav_ring *ring);
/**
* k3_nav_ringacc_get_ring_id - Get the Ring ID
* @ring: pointer on ring
*
* Returns the Ring ID
*/
u32 k3_nav_ringacc_get_ring_id(struct k3_nav_ring *ring);
/**
* k3_nav_ringacc_ring_cfg - ring configure
* @ring: pointer on ring
* @cfg: Ring configuration parameters (see &struct k3_nav_ring_cfg)
*
* Configures ring, including ring memory allocation.
* Returns 0 on success, errno otherwise.
*/
int k3_nav_ringacc_ring_cfg(struct k3_nav_ring *ring,
struct k3_nav_ring_cfg *cfg);
/**
* k3_nav_ringacc_ring_get_size - get ring size
* @ring: pointer on ring
*
* Returns ring size in number of elements.
*/
u32 k3_nav_ringacc_ring_get_size(struct k3_nav_ring *ring);
/**
* k3_nav_ringacc_ring_get_free - get free elements
* @ring: pointer on ring
*
* Returns number of free elements in the ring.
*/
u32 k3_nav_ringacc_ring_get_free(struct k3_nav_ring *ring);
/**
* k3_nav_ringacc_ring_get_occ - get ring occupancy
* @ring: pointer on ring
*
* Returns total number of valid entries on the ring
*/
u32 k3_nav_ringacc_ring_get_occ(struct k3_nav_ring *ring);
/**
* k3_nav_ringacc_ring_is_full - checks if ring is full
* @ring: pointer on ring
*
* Returns true if the ring is full
*/
u32 k3_nav_ringacc_ring_is_full(struct k3_nav_ring *ring);
/**
* k3_nav_ringacc_ring_push - push element to the ring tail
* @ring: pointer on ring
* @elem: pointer on ring element buffer
*
* Push one ring element to the ring tail. Size of the ring element is
* determined by ring configuration &struct k3_nav_ring_cfg elm_size.
*
* Returns 0 on success, errno otherwise.
*/
int k3_nav_ringacc_ring_push(struct k3_nav_ring *ring, void *elem);
/**
* k3_nav_ringacc_ring_pop - pop element from the ring head
* @ring: pointer on ring
* @elem: pointer on ring element buffer
*
* Push one ring element from the ring head. Size of the ring element is
* determined by ring configuration &struct k3_nav_ring_cfg elm_size..
*
* Returns 0 on success, errno otherwise.
*/
int k3_nav_ringacc_ring_pop(struct k3_nav_ring *ring, void *elem);
/**
* k3_nav_ringacc_ring_push_head - push element to the ring head
* @ring: pointer on ring
* @elem: pointer on ring element buffer
*
* Push one ring element to the ring head. Size of the ring element is
* determined by ring configuration &struct k3_nav_ring_cfg elm_size.
*
* Returns 0 on success, errno otherwise.
* Not Supported by ring modes: K3_NAV_RINGACC_RING_MODE_RING
*/
int k3_nav_ringacc_ring_push_head(struct k3_nav_ring *ring, void *elem);
/**
* k3_nav_ringacc_ring_pop_tail - pop element from the ring tail
* @ring: pointer on ring
* @elem: pointer on ring element buffer
*
* Push one ring element from the ring tail. Size of the ring element is
* determined by ring configuration &struct k3_nav_ring_cfg elm_size.
*
* Returns 0 on success, errno otherwise.
* Not Supported by ring modes: K3_NAV_RINGACC_RING_MODE_RING
*/
int k3_nav_ringacc_ring_pop_tail(struct k3_nav_ring *ring, void *elem);
#endif /* __SOC_TI_K3_NAVSS_RINGACC_API_H_ */