blob: 35383c9a2b1f9a9bef60b98a9a52c2b2eb778a80 [file] [log] [blame]
/*
* Copyright 2015 Sutajio Ko-Usagi PTE LTD
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public
* License along with this file; if not, write to the Free
* Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
* MA 02110-1301 USA
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*
*/
/dts-v1/;
#include "imx6q.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
model = "Kosagi Novena Dual/Quad";
compatible = "kosagi,imx6q-novena", "fsl,imx6q";
/* Will be filled by the bootloader */
memory@10000000 {
device_type = "memory";
reg = <0x10000000 0>;
};
aliases {
mmc0 = &usdhc3;
mmc1 = &usdhc2;
};
chosen {
stdout-path = &uart2;
};
backlight: backlight {
compatible = "pwm-backlight";
pwms = <&pwm1 0 10000000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_backlight_novena>;
power-supply = <&reg_lvds_lcd>;
brightness-levels = <0 3 6 12 16 24 32 48 64 96 128 192 255>;
default-brightness-level = <12>;
};
gpio-keys {
compatible = "gpio-keys";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio_keys_novena>;
user-button {
label = "User Button";
gpios = <&gpio4 14 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
};
lid {
label = "Lid";
gpios = <&gpio4 12 GPIO_ACTIVE_LOW>;
linux,input-type = <5>; /* EV_SW */
linux,code = <0>; /* SW_LID */
};
};
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_leds_novena>;
heartbeat {
label = "novena:white:panel";
gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "default-on";
};
};
panel: panel {
compatible = "innolux,n133hse-ea1", "simple-panel";
backlight = <&backlight>;
};
reg_2p5v: regulator-2p5v {
compatible = "regulator-fixed";
regulator-name = "2P5V";
regulator-min-microvolt = <2500000>;
regulator-max-microvolt = <2500000>;
regulator-always-on;
};
reg_3p3v: regulator-3p3v {
compatible = "regulator-fixed";
regulator-name = "3P3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
reg_audio_codec: regulator-audio-codec {
compatible = "regulator-fixed";
regulator-name = "es8328-power";
regulator-boot-on;
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
startup-delay-us = <400000>;
gpio = <&gpio5 17 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
reg_display: regulator-display {
compatible = "regulator-fixed";
regulator-name = "lcd-display-power";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
startup-delay-us = <200000>;
gpio = <&gpio5 28 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
reg_lvds_lcd: regulator-lvds-lcd {
compatible = "regulator-fixed";
regulator-name = "lcd-lvds-power";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
reg_pcie: regulator-pcie {
compatible = "regulator-fixed";
regulator-name = "pcie-bus-power";
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <1500000>;
gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
reg_sata: regulator-sata {
compatible = "regulator-fixed";
regulator-name = "sata-power";
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
startup-delay-us = <10000>;
gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
reg_usb_otg_vbus: regulator-usb-otg-vbus {
compatible = "regulator-fixed";
regulator-name = "usb_otg_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
};
sound {
compatible = "fsl,imx-audio-es8328";
model = "imx-audio-es8328";
ssi-controller = <&ssi1>;
audio-codec = <&codec>;
audio-amp-supply = <&reg_audio_codec>;
jack-gpio = <&gpio5 15 GPIO_ACTIVE_HIGH>;
audio-routing =
"Speaker", "LOUT2",
"Speaker", "ROUT2",
"Speaker", "audio-amp",
"Headphone", "ROUT1",
"Headphone", "LOUT1",
"LINPUT1", "Mic Jack",
"RINPUT1", "Mic Jack",
"Mic Jack", "Mic Bias";
mux-int-port = <0x1>;
mux-ext-port = <0x3>;
};
};
&audmux {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_audmux_novena>;
status = "okay";
};
&ecspi3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi3_novena>;
status = "okay";
};
&fec {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet_novena>;
phy-mode = "rgmii";
phy-reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
rxc-skew-ps = <3000>;
rxdv-skew-ps = <0>;
txc-skew-ps = <3000>;
txen-skew-ps = <0>;
rxd0-skew-ps = <0>;
rxd1-skew-ps = <0>;
rxd2-skew-ps = <0>;
rxd3-skew-ps = <0>;
txd0-skew-ps = <3000>;
txd1-skew-ps = <3000>;
txd2-skew-ps = <3000>;
txd3-skew-ps = <3000>;
status = "okay";
};
&hdmi {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hdmi_novena>;
ddc-i2c-bus = <&i2c2>;
status = "okay";
};
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1_novena>;
status = "okay";
accel: mma8452@1c {
compatible = "fsl,mma8452";
reg = <0x1c>;
};
rtc: pcf8523@68 {
compatible = "nxp,pcf8523";
reg = <0x68>;
};
sbs_battery: bq20z75@b {
compatible = "sbs,sbs-battery";
reg = <0x0b>;
sbs,i2c-retry-count = <50>;
};
touch: stmpe811@44 {
compatible = "st,stmpe811";
reg = <0x44>;
irq-gpio = <&gpio5 13 GPIO_ACTIVE_HIGH>;
id = <0>;
blocks = <0x5>;
irq-trigger = <0x1>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_stmpe_novena>;
vio-supply = <&reg_3p3v>;
vcc-supply = <&reg_3p3v>;
stmpe_touchscreen {
compatible = "st,stmpe-ts";
st,sample-time = <4>;
st,mod-12b = <1>;
st,ref-sel = <0>;
st,adc-freq = <1>;
st,ave-ctrl = <1>;
st,touch-det-delay = <2>;
st,settling = <2>;
st,fraction-z = <7>;
st,i-drive = <1>;
};
};
};
&i2c2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2_novena>;
status = "okay";
pmic: pfuze100@8 {
compatible = "fsl,pfuze100";
reg = <0x08>;
regulators {
reg_sw1a: sw1a {
regulator-min-microvolt = <300000>;
regulator-max-microvolt = <1875000>;
regulator-boot-on;
regulator-always-on;
regulator-ramp-delay = <6250>;
};
reg_sw1c: sw1c {
regulator-min-microvolt = <300000>;
regulator-max-microvolt = <1875000>;
regulator-boot-on;
regulator-always-on;
};
reg_sw2: sw2 {
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
};
reg_sw3a: sw3a {
regulator-min-microvolt = <400000>;
regulator-max-microvolt = <1975000>;
regulator-boot-on;
regulator-always-on;
};
reg_sw3b: sw3b {
regulator-min-microvolt = <400000>;
regulator-max-microvolt = <1975000>;
regulator-boot-on;
regulator-always-on;
};
reg_sw4: sw4 {
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <3300000>;
};
reg_swbst: swbst {
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5150000>;
regulator-boot-on;
};
reg_snvs: vsnvs {
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <3000000>;
regulator-boot-on;
regulator-always-on;
};
reg_vref: vrefddr {
regulator-boot-on;
regulator-always-on;
};
reg_vgen1: vgen1 {
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1550000>;
};
reg_vgen2: vgen2 {
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1550000>;
};
reg_vgen3: vgen3 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
};
reg_vgen4: vgen4 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
reg_vgen5: vgen5 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
reg_vgen6: vgen6 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
};
};
};
&i2c3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c3_novena>;
status = "okay";
codec: es8328@11 {
compatible = "everest,es8328";
reg = <0x11>;
DVDD-supply = <&reg_audio_codec>;
AVDD-supply = <&reg_audio_codec>;
PVDD-supply = <&reg_audio_codec>;
HPVDD-supply = <&reg_audio_codec>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sound_novena>;
clocks = <&clks IMX6QDL_CLK_CKO1>;
assigned-clocks = <&clks IMX6QDL_CLK_CKO>,
<&clks IMX6QDL_CLK_CKO1_SEL>,
<&clks IMX6QDL_CLK_PLL4_AUDIO>,
<&clks IMX6QDL_CLK_CKO1>;
assigned-clock-parents = <&clks IMX6QDL_CLK_CKO1>,
<&clks IMX6QDL_CLK_PLL4_AUDIO_DIV>,
<&clks IMX6QDL_CLK_OSC>,
<&clks IMX6QDL_CLK_CKO1_PODF>;
assigned-clock-rates = <0 0 722534400 22579200>;
};
};
&kpp {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_kpp_novena>;
linux,keymap = <
MATRIX_KEY(1, 1, KEY_CONFIG)
>;
status = "okay";
};
&ldb {
fsl,dual-channel;
status = "okay";
lvds-channel@0 {
fsl,data-mapping = "jeida";
fsl,data-width = <24>;
fsl,panel = <&panel>;
status = "okay";
};
};
&pcie {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pcie_novena>;
reset-gpio = <&gpio3 29 GPIO_ACTIVE_LOW>;
vpcie-supply = <&reg_pcie>;
status = "okay";
};
&pwm1 {
status = "okay";
};
&sata {
target-supply = <&reg_sata>;
fsl,transmit-level-mV = <1025>;
fsl,transmit-boost-mdB = <0>;
fsl,transmit-atten-16ths = <8>;
status = "okay";
};
&ssi1 {
status = "okay";
};
&uart2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2_novena>;
status = "okay";
};
&uart3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3_novena>;
status = "okay";
};
&uart4 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart4_novena>;
status = "okay";
};
&usbotg {
vbus-supply = <&reg_usb_otg_vbus>;
dr_mode = "otg";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbotg_novena>;
disable-over-current;
status = "okay";
};
&usbh1 {
vbus-supply = <&reg_swbst>;
status = "okay";
};
&usdhc2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc2_novena>;
cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
wp-gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
bus-width = <4>;
status = "okay";
};
&usdhc3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc3_novena>;
bus-width = <4>;
non-removable;
status = "okay";
};
&iomuxc {
pinctrl_audmux_novena: audmuxgrp-novena {
fsl,pins = <
MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0
MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0
MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0
MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0
>;
};
pinctrl_backlight_novena: backlightgrp-novena {
fsl,pins = <
MX6QDL_PAD_DISP0_DAT8__PWM1_OUT 0x1b0b0
MX6QDL_PAD_CSI0_DAT10__GPIO5_IO28 0x1b0b1
MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b1
>;
};
pinctrl_ecspi3_novena: ecspi3grp-novena {
fsl,pins = <
MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO 0x100b1
MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x100b1
MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x100b1
>;
};
pinctrl_enet_novena: enetgrp-novena {
fsl,pins = <
MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b020
MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b028
MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b028
MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b028
MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b028
MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b028
MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030
MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030
MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030
MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030
MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030
MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030
MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
/* Ethernet reset */
MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x1b0b1
>;
};
pinctrl_fpga_gpio: fpgagpiogrp-novena {
fsl,pins = <
/* FPGA power */
MX6QDL_PAD_SD1_DAT1__GPIO1_IO17 0x1b0b1
/* Reset */
MX6QDL_PAD_DISP0_DAT13__GPIO5_IO07 0x1b0b1
/* FPGA GPIOs */
MX6QDL_PAD_EIM_DA0__GPIO3_IO00 0x1b0b1
MX6QDL_PAD_EIM_DA1__GPIO3_IO01 0x1b0b1
MX6QDL_PAD_EIM_DA2__GPIO3_IO02 0x1b0b1
MX6QDL_PAD_EIM_DA3__GPIO3_IO03 0x1b0b1
MX6QDL_PAD_EIM_DA4__GPIO3_IO04 0x1b0b1
MX6QDL_PAD_EIM_DA5__GPIO3_IO05 0x1b0b1
MX6QDL_PAD_EIM_DA6__GPIO3_IO06 0x1b0b1
MX6QDL_PAD_EIM_DA7__GPIO3_IO07 0x1b0b1
MX6QDL_PAD_EIM_DA8__GPIO3_IO08 0x1b0b1
MX6QDL_PAD_EIM_DA9__GPIO3_IO09 0x1b0b1
MX6QDL_PAD_EIM_DA10__GPIO3_IO10 0x1b0b1
MX6QDL_PAD_EIM_DA11__GPIO3_IO11 0x1b0b1
MX6QDL_PAD_EIM_DA12__GPIO3_IO12 0x1b0b1
MX6QDL_PAD_EIM_DA13__GPIO3_IO13 0x1b0b1
MX6QDL_PAD_EIM_DA14__GPIO3_IO14 0x1b0b1
MX6QDL_PAD_EIM_DA15__GPIO3_IO15 0x1b0b1
MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x1b0b1
MX6QDL_PAD_EIM_A17__GPIO2_IO21 0x1b0b1
MX6QDL_PAD_EIM_A18__GPIO2_IO20 0x1b0b1
MX6QDL_PAD_EIM_CS0__GPIO2_IO23 0x1b0b1
MX6QDL_PAD_EIM_CS1__GPIO2_IO24 0x1b0b1
MX6QDL_PAD_EIM_LBA__GPIO2_IO27 0x1b0b1
MX6QDL_PAD_EIM_OE__GPIO2_IO25 0x1b0b1
MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x1b0b1
MX6QDL_PAD_EIM_WAIT__GPIO5_IO00 0x1b0b1
MX6QDL_PAD_EIM_BCLK__GPIO6_IO31 0x1b0b1
>;
};
pinctrl_fpga_eim: fpgaeimgrp-novena {
fsl,pins = <
/* FPGA power */
MX6QDL_PAD_SD1_DAT1__GPIO1_IO17 0x1b0b1
/* Reset */
MX6QDL_PAD_DISP0_DAT13__GPIO5_IO07 0x1b0b1
/* FPGA GPIOs */
MX6QDL_PAD_EIM_DA0__EIM_AD00 0xb0f1
MX6QDL_PAD_EIM_DA1__EIM_AD01 0xb0f1
MX6QDL_PAD_EIM_DA2__EIM_AD02 0xb0f1
MX6QDL_PAD_EIM_DA3__EIM_AD03 0xb0f1
MX6QDL_PAD_EIM_DA4__EIM_AD04 0xb0f1
MX6QDL_PAD_EIM_DA5__EIM_AD05 0xb0f1
MX6QDL_PAD_EIM_DA6__EIM_AD06 0xb0f1
MX6QDL_PAD_EIM_DA7__EIM_AD07 0xb0f1
MX6QDL_PAD_EIM_DA8__EIM_AD08 0xb0f1
MX6QDL_PAD_EIM_DA9__EIM_AD09 0xb0f1
MX6QDL_PAD_EIM_DA10__EIM_AD10 0xb0f1
MX6QDL_PAD_EIM_DA11__EIM_AD11 0xb0f1
MX6QDL_PAD_EIM_DA12__EIM_AD12 0xb0f1
MX6QDL_PAD_EIM_DA13__EIM_AD13 0xb0f1
MX6QDL_PAD_EIM_DA14__EIM_AD14 0xb0f1
MX6QDL_PAD_EIM_DA15__EIM_AD15 0xb0f1
MX6QDL_PAD_EIM_A16__EIM_ADDR16 0xb0f1
MX6QDL_PAD_EIM_A17__EIM_ADDR17 0xb0f1
MX6QDL_PAD_EIM_A18__EIM_ADDR18 0xb0f1
MX6QDL_PAD_EIM_CS0__EIM_CS0_B 0xb0f1
MX6QDL_PAD_EIM_CS1__EIM_CS1_B 0xb0f1
MX6QDL_PAD_EIM_LBA__EIM_LBA_B 0xb0f1
MX6QDL_PAD_EIM_OE__EIM_OE_B 0xb0f1
MX6QDL_PAD_EIM_RW__EIM_RW 0xb0f1
MX6QDL_PAD_EIM_WAIT__EIM_WAIT_B 0xb0f1
MX6QDL_PAD_EIM_BCLK__EIM_BCLK 0xb0f1
>;
};
pinctrl_gpio_keys_novena: gpiokeysgrp-novena {
fsl,pins = <
/* User button */
MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x1b0b0
/* PCIe Wakeup */
MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1f0e0
/* Lid switch */
MX6QDL_PAD_KEY_COL3__GPIO4_IO12 0x1b0b0
>;
};
pinctrl_hdmi_novena: hdmigrp-novena {
fsl,pins = <
MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0
MX6QDL_PAD_EIM_A24__GPIO5_IO04 0x1b0b1
>;
};
pinctrl_i2c1_novena: i2c1grp-novena {
fsl,pins = <
MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
>;
};
pinctrl_i2c2_novena: i2c2grp-novena {
fsl,pins = <
MX6QDL_PAD_EIM_EB2__I2C2_SCL 0x4001b8b1
MX6QDL_PAD_EIM_D16__I2C2_SDA 0x4001b8b1
>;
};
pinctrl_i2c3_novena: i2c3grp-novena {
fsl,pins = <
MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1
MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
>;
};
pinctrl_kpp_novena: kppgrp-novena {
fsl,pins = <
/* Front panel button */
MX6QDL_PAD_KEY_ROW1__KEY_ROW1 0x1b0b1
/* Fake column driver, not connected */
MX6QDL_PAD_KEY_COL1__KEY_COL1 0x1b0b1
>;
};
pinctrl_leds_novena: ledsgrp-novena {
fsl,pins = <
MX6QDL_PAD_SD1_DAT3__GPIO1_IO21 0x1b0b1
>;
};
pinctrl_pcie_novena: pciegrp-novena {
fsl,pins = <
/* Reset */
MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x1b0b1
/* Power On */
MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b1
/* Wifi kill */
MX6QDL_PAD_EIM_A22__GPIO2_IO16 0x1b0b1
>;
};
pinctrl_sata_novena: satagrp-novena {
fsl,pins = <
MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x1b0b1
>;
};
pinctrl_senoko_novena: senokogrp-novena {
fsl,pins = <
/* Senoko IRQ line */
MX6QDL_PAD_SD1_CLK__GPIO1_IO20 0x13048
/* Senoko reset line */
MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21 0x1b0b1
>;
};
pinctrl_sound_novena: soundgrp-novena {
fsl,pins = <
/* Audio power regulator */
MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17 0x1b0b1
/* Headphone plug */
MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15 0x1b0b1
MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x000b0
>;
};
pinctrl_stmpe_novena: stmpegrp-novena {
fsl,pins = <
/* Touchscreen interrupt */
MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13 0x1b0b1
>;
};
pinctrl_uart2_novena: uart2grp-novena {
fsl,pins = <
MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1
MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1
>;
};
pinctrl_uart3_novena: uart3grp-novena {
fsl,pins = <
MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
>;
};
pinctrl_uart4_novena: uart4grp-novena {
fsl,pins = <
MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1
MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b1
>;
};
pinctrl_usbotg_novena: usbotggrp-novena {
fsl,pins = <
MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
>;
};
pinctrl_usdhc2_novena: usdhc2grp-novena {
fsl,pins = <
MX6QDL_PAD_SD2_CMD__SD2_CMD 0x170f9
MX6QDL_PAD_SD2_CLK__SD2_CLK 0x100f9
MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x170f9
MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x170f9
MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x170f9
MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x170f9
/* Write protect */
MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b1
/* Card detect */
MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b1
>;
};
pinctrl_usdhc3_novena: usdhc3grp-novena {
fsl,pins = <
MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9
MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9
MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170f9
MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170f9
MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170f9
MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170f9
>;
};
};