blob: 63908ba6bf1ff27102d60ca30b2456e4472331bd [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright 2017-2018 NXP
*/
/dts-v1/;
#include "fsl-imx8qm.dtsi"
#include "fsl-imx8qm-mek-u-boot.dtsi"
/ {
model = "Freescale i.MX8QM MEK";
compatible = "fsl,imx8qm-mek", "fsl,imx8qm";
chosen {
bootargs = "console=ttyLP0,115200 earlycon=lpuart32,0x5a060000,115200";
stdout-path = &lpuart0;
};
reg_usdhc2_vmmc: usdhc2_vmmc {
compatible = "regulator-fixed";
regulator-name = "sw-3p3-sd1";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio4 7 GPIO_ACTIVE_HIGH>;
off-on-delay = <4800>;
enable-active-high;
};
};
&iomuxc {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hog>;
imx8qm-mek {
pinctrl_hog: hoggrp {
fsl,pins = <
SC_P_MCLK_OUT0_AUD_ACM_MCLK_OUT0 0x0600004c
SC_P_QSPI1A_DATA1_LSIO_GPIO4_IO25 0x0600004c
SC_P_SCU_GPIO0_03_LSIO_GPIO0_IO31 0x0600004c
>;
};
pinctrl_fec1: fec1grp {
fsl,pins = <
SC_P_COMP_CTL_GPIO_1V8_3V3_ENET_ENETB_PAD 0x000014a0
SC_P_ENET0_MDC_CONN_ENET0_MDC 0x06000020
SC_P_ENET0_MDIO_CONN_ENET0_MDIO 0x06000020
SC_P_ENET0_RGMII_TX_CTL_CONN_ENET0_RGMII_TX_CTL 0x00000061
SC_P_ENET0_RGMII_TXC_CONN_ENET0_RGMII_TXC 0x00000061
SC_P_ENET0_RGMII_TXD0_CONN_ENET0_RGMII_TXD0 0x00000061
SC_P_ENET0_RGMII_TXD1_CONN_ENET0_RGMII_TXD1 0x00000061
SC_P_ENET0_RGMII_TXD2_CONN_ENET0_RGMII_TXD2 0x00000061
SC_P_ENET0_RGMII_TXD3_CONN_ENET0_RGMII_TXD3 0x00000061
SC_P_ENET0_RGMII_RXC_CONN_ENET0_RGMII_RXC 0x00000061
SC_P_ENET0_RGMII_RX_CTL_CONN_ENET0_RGMII_RX_CTL 0x00000061
SC_P_ENET0_RGMII_RXD0_CONN_ENET0_RGMII_RXD0 0x00000061
SC_P_ENET0_RGMII_RXD1_CONN_ENET0_RGMII_RXD1 0x00000061
SC_P_ENET0_RGMII_RXD2_CONN_ENET0_RGMII_RXD2 0x00000061
SC_P_ENET0_RGMII_RXD3_CONN_ENET0_RGMII_RXD3 0x00000061
>;
};
pinctrl_fec2: fec2grp {
fsl,pins = <
SC_P_COMP_CTL_GPIO_1V8_3V3_ENET_ENETA_PAD 0x000014a0
SC_P_ENET1_RGMII_TX_CTL_CONN_ENET1_RGMII_TX_CTL 0x00000060
SC_P_ENET1_RGMII_TXC_CONN_ENET1_RGMII_TXC 0x00000060
SC_P_ENET1_RGMII_TXD0_CONN_ENET1_RGMII_TXD0 0x00000060
SC_P_ENET1_RGMII_TXD1_CONN_ENET1_RGMII_TXD1 0x00000060
SC_P_ENET1_RGMII_TXD2_CONN_ENET1_RGMII_TXD2 0x00000060
SC_P_ENET1_RGMII_TXD3_CONN_ENET1_RGMII_TXD3 0x00000060
SC_P_ENET1_RGMII_RXC_CONN_ENET1_RGMII_RXC 0x00000060
SC_P_ENET1_RGMII_RX_CTL_CONN_ENET1_RGMII_RX_CTL 0x00000060
SC_P_ENET1_RGMII_RXD0_CONN_ENET1_RGMII_RXD0 0x00000060
SC_P_ENET1_RGMII_RXD1_CONN_ENET1_RGMII_RXD1 0x00000060
SC_P_ENET1_RGMII_RXD2_CONN_ENET1_RGMII_RXD2 0x00000060
SC_P_ENET1_RGMII_RXD3_CONN_ENET1_RGMII_RXD3 0x00000060
>;
};
pinctrl_lpuart0: lpuart0grp {
fsl,pins = <
SC_P_UART0_RX_DMA_UART0_RX 0x06000020
SC_P_UART0_TX_DMA_UART0_TX 0x06000020
>;
};
pinctrl_usdhc1: usdhc1grp {
fsl,pins = <
SC_P_EMMC0_CLK_CONN_EMMC0_CLK 0x06000041
SC_P_EMMC0_CMD_CONN_EMMC0_CMD 0x00000021
SC_P_EMMC0_DATA0_CONN_EMMC0_DATA0 0x00000021
SC_P_EMMC0_DATA1_CONN_EMMC0_DATA1 0x00000021
SC_P_EMMC0_DATA2_CONN_EMMC0_DATA2 0x00000021
SC_P_EMMC0_DATA3_CONN_EMMC0_DATA3 0x00000021
SC_P_EMMC0_DATA4_CONN_EMMC0_DATA4 0x00000021
SC_P_EMMC0_DATA5_CONN_EMMC0_DATA5 0x00000021
SC_P_EMMC0_DATA6_CONN_EMMC0_DATA6 0x00000021
SC_P_EMMC0_DATA7_CONN_EMMC0_DATA7 0x00000021
SC_P_EMMC0_STROBE_CONN_EMMC0_STROBE 0x00000041
SC_P_EMMC0_RESET_B_CONN_EMMC0_RESET_B 0x00000021
>;
};
pinctrl_usdhc2_gpio: usdhc2grpgpio {
fsl,pins = <
SC_P_USDHC1_DATA6_LSIO_GPIO5_IO21 0x00000021
SC_P_USDHC1_DATA7_LSIO_GPIO5_IO22 0x00000021
SC_P_USDHC1_RESET_B_LSIO_GPIO4_IO07 0x00000021
>;
};
pinctrl_usdhc2: usdhc2grp {
fsl,pins = <
SC_P_USDHC1_CLK_CONN_USDHC1_CLK 0x06000041
SC_P_USDHC1_CMD_CONN_USDHC1_CMD 0x00000021
SC_P_USDHC1_DATA0_CONN_USDHC1_DATA0 0x00000021
SC_P_USDHC1_DATA1_CONN_USDHC1_DATA1 0x00000021
SC_P_USDHC1_DATA2_CONN_USDHC1_DATA2 0x00000021
SC_P_USDHC1_DATA3_CONN_USDHC1_DATA3 0x00000021
SC_P_USDHC1_VSELECT_CONN_USDHC1_VSELECT 0x00000021
>;
};
};
};
&usdhc1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc1>;
bus-width = <8>;
non-removable;
status = "okay";
};
&usdhc2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
bus-width = <4>;
cd-gpios = <&gpio5 22 GPIO_ACTIVE_LOW>;
wp-gpios = <&gpio5 21 GPIO_ACTIVE_HIGH>;
vmmc-supply = <&reg_usdhc2_vmmc>;
status = "okay";
};
&fec1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fec1>;
phy-mode = "rgmii-txid";
phy-handle = <&ethphy0>;
fsl,magic-packet;
fsl,rgmii_rxc_dly;
status = "okay";
mdio {
#address-cells = <1>;
#size-cells = <0>;
ethphy0: ethernet-phy@0 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <0>;
at803x,eee-disabled;
at803x,vddio-1p8v;
};
ethphy1: ethernet-phy@1 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <1>;
at803x,eee-disabled;
at803x,vddio-1p8v;
status = "disabled";
};
};
};
&lpuart0 { /* console */
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lpuart0>;
status = "okay";
};
&gpio1 {
status = "okay";
};