blob: 1b219c423bd796ac24794542f3d325eeadb35178 [file] [log] [blame]
/*
* Device Tree file for Marvell Armada 3720 development board
* (DB-88F3720-DDR3)
* Copyright (C) 2016 Marvell
*
* Gregory CLEMENT <gregory.clement@free-electrons.com>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
#include "armada-372x.dtsi"
/ {
model = "Marvell Armada 3720 Development Board DB-88F3720-DDR3";
compatible = "marvell,armada-3720-db", "marvell,armada3720", "marvell,armada3710";
chosen {
stdout-path = "serial0:115200n8";
};
aliases {
ethernet0 = &eth0;
i2c0 = &i2c0;
spi0 = &spi0;
};
memory {
device_type = "memory";
reg = <0x00000000 0x00000000 0x00000000 0x20000000>;
};
};
&comphy {
phy0 {
phy-type = <PHY_TYPE_PEX0>;
phy-speed = <PHY_SPEED_2_5G>;
};
phy1 {
phy-type = <PHY_TYPE_USB3_HOST0>;
phy-speed = <PHY_SPEED_5G>;
};
};
&eth0 {
pinctrl-names = "default";
pinctrl-0 = <&rgmii_pins>, <&smi_pins>;
status = "okay";
phy-mode = "rgmii";
};
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins>;
status = "okay";
};
/* CON3 */
&sata {
status = "okay";
};
&sdhci0 {
bus-width = <4>;
pinctrl-names = "default";
pinctrl-0 = <&sdio_pins>;
status = "okay";
};
&sdhci1 {
non-removable;
bus-width = <8>;
mmc-ddr-1_8v;
mmc-hs400-1_8v;
marvell,pad-type = "fixed-1-8v";
pinctrl-names = "default";
pinctrl-0 = <&mmc_pins>;
status = "okay";
#address-cells = <1>;
#size-cells = <0>;
mmccard: mmccard@0 {
compatible = "mmc-card";
reg = <0>;
};
};
&spi0 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&spi_quad_pins>;
spi-flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "st,m25p128", "jedec,spi-nor";
reg = <0>; /* Chip select 0 */
spi-max-frequency = <50000000>;
m25p,fast-read;
};
};
/* Exported on the micro USB connector CON32 through an FTDI */
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart1_pins>;
status = "okay";
};
/* CON29 */
&usb2 {
status = "okay";
};
/* CON31 */
&usb3 {
status = "okay";
};
/* CON17 */
&pcie0 {
pinctrl-names = "default";
pinctrl-0 = <&pcie_pins>;
reset-gpio = <&gpiosb 3 GPIO_ACTIVE_HIGH>;
status = "okay";
};