blob: 27b0baab2781717ddbaf2a9128666275f4bb6ef0 [file] [log] [blame]
/dts-v1/;
/ {
model = "sandbox";
compatible = "sandbox";
#address-cells = <1>;
#size-cells = <1>;
aliases {
console = &uart0;
eth0 = "/eth@10002000";
eth3 = &eth_3;
eth5 = &eth_5;
gpio1 = &gpio_a;
gpio2 = &gpio_b;
i2c0 = "/i2c@0";
mmc0 = "/mmc0";
mmc1 = "/mmc1";
pci0 = &pci0;
pci1 = &pci1;
pci2 = &pci2;
remoteproc1 = &rproc_1;
remoteproc2 = &rproc_2;
rtc0 = &rtc_0;
rtc1 = &rtc_1;
spi0 = "/spi@0";
testfdt6 = "/e-test";
testbus3 = "/some-bus";
testfdt0 = "/some-bus/c-test@0";
testfdt1 = "/some-bus/c-test@1";
testfdt3 = "/b-test";
testfdt5 = "/some-bus/c-test@5";
testfdt8 = "/a-test";
fdt-dummy0 = "/translation-test@8000/dev@0,0";
fdt-dummy1 = "/translation-test@8000/dev@1,100";
fdt-dummy2 = "/translation-test@8000/dev@2,200";
fdt-dummy3 = "/translation-test@8000/noxlatebus@3,300/dev@42";
usb0 = &usb_0;
usb1 = &usb_1;
usb2 = &usb_2;
axi0 = &axi;
osd0 = "/osd";
};
audio: audio-codec {
compatible = "sandbox,audio-codec";
#sound-dai-cells = <1>;
};
cros_ec: cros-ec {
reg = <0 0>;
compatible = "google,cros-ec-sandbox";
/*
* This describes the flash memory within the EC. Note
* that the STM32L flash erases to 0, not 0xff.
*/
flash {
image-pos = <0x08000000>;
size = <0x20000>;
erase-value = <0>;
/* Information for sandbox */
ro {
image-pos = <0>;
size = <0xf000>;
};
wp-ro {
image-pos = <0xf000>;
size = <0x1000>;
};
rw {
image-pos = <0x10000>;
size = <0x10000>;
};
};
};
a-test {
reg = <0 1>;
compatible = "denx,u-boot-fdt-test";
ping-expect = <0>;
ping-add = <0>;
u-boot,dm-pre-reloc;
test-gpios = <&gpio_a 1>, <&gpio_a 4>, <&gpio_b 5 0 3 2 1>,
<0>, <&gpio_a 12>;
test2-gpios = <&gpio_a 1>, <&gpio_a 4>, <&gpio_b 6 1 3 2 1>,
<&gpio_b 7 2 3 2 1>, <&gpio_b 8 4 3 2 1>,
<&gpio_b 9 0xc 3 2 1>;
int-value = <1234>;
uint-value = <(-1234)>;
};
junk {
reg = <1 1>;
compatible = "not,compatible";
};
no-compatible {
reg = <2 1>;
};
backlight: backlight {
compatible = "pwm-backlight";
enable-gpios = <&gpio_a 1>;
power-supply = <&ldo_1>;
pwms = <&pwm 0 1000>;
default-brightness-level = <5>;
brightness-levels = <0 16 32 64 128 170 202 234 255>;
};
bind-test {
bind-test-child1 {
compatible = "sandbox,phy";
#phy-cells = <1>;
};
bind-test-child2 {
compatible = "simple-bus";
};
};
b-test {
reg = <3 1>;
compatible = "denx,u-boot-fdt-test";
ping-expect = <3>;
ping-add = <3>;
};
phy_provider0: gen_phy@0 {
compatible = "sandbox,phy";
#phy-cells = <1>;
};
phy_provider1: gen_phy@1 {
compatible = "sandbox,phy";
#phy-cells = <0>;
broken;
};
gen_phy_user: gen_phy_user {
compatible = "simple-bus";
phys = <&phy_provider0 0>, <&phy_provider0 1>, <&phy_provider1>;
phy-names = "phy1", "phy2", "phy3";
};
some-bus {
#address-cells = <1>;
#size-cells = <0>;
compatible = "denx,u-boot-test-bus";
reg = <3 1>;
ping-expect = <4>;
ping-add = <4>;
c-test@5 {
compatible = "denx,u-boot-fdt-test";
reg = <5>;
ping-expect = <5>;
ping-add = <5>;
};
c-test@0 {
compatible = "denx,u-boot-fdt-test";
reg = <0>;
ping-expect = <6>;
ping-add = <6>;
};
c-test@1 {
compatible = "denx,u-boot-fdt-test";
reg = <1>;
ping-expect = <7>;
ping-add = <7>;
};
};
d-test {
reg = <3 1>;
ping-expect = <6>;
ping-add = <6>;
compatible = "google,another-fdt-test";
};
e-test {
reg = <3 1>;
ping-expect = <6>;
ping-add = <6>;
compatible = "google,another-fdt-test";
};
f-test {
compatible = "denx,u-boot-fdt-test";
};
g-test {
compatible = "denx,u-boot-fdt-test";
};
h-test {
compatible = "denx,u-boot-fdt-test1";
};
clocks {
clk_fixed: clk-fixed {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <1234>;
};
clk_fixed_factor: clk-fixed-factor {
compatible = "fixed-factor-clock";
#clock-cells = <0>;
clock-div = <3>;
clock-mult = <2>;
clocks = <&clk_fixed>;
};
osc {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <20000000>;
};
};
clk_sandbox: clk-sbox {
compatible = "sandbox,clk";
#clock-cells = <1>;
};
clk-test {
compatible = "sandbox,clk-test";
clocks = <&clk_fixed>,
<&clk_sandbox 1>,
<&clk_sandbox 0>;
clock-names = "fixed", "i2c", "spi";
};
ccf: clk-ccf {
compatible = "sandbox,clk-ccf";
};
eth@10002000 {
compatible = "sandbox,eth";
reg = <0x10002000 0x1000>;
fake-host-hwaddr = [00 00 66 44 22 00];
};
eth_5: eth@10003000 {
compatible = "sandbox,eth";
reg = <0x10003000 0x1000>;
fake-host-hwaddr = [00 00 66 44 22 11];
};
eth_3: sbe5 {
compatible = "sandbox,eth";
reg = <0x10005000 0x1000>;
fake-host-hwaddr = [00 00 66 44 22 33];
};
eth@10004000 {
compatible = "sandbox,eth";
reg = <0x10004000 0x1000>;
fake-host-hwaddr = [00 00 66 44 22 22];
};
firmware {
sandbox_firmware: sandbox-firmware {
compatible = "sandbox,firmware";
};
};
gpio_a: base-gpios {
compatible = "sandbox,gpio";
gpio-controller;
#gpio-cells = <1>;
gpio-bank-name = "a";
sandbox,gpio-count = <20>;
};
gpio_b: extra-gpios {
compatible = "sandbox,gpio";
gpio-controller;
#gpio-cells = <5>;
gpio-bank-name = "b";
sandbox,gpio-count = <10>;
};
i2c@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0 1>;
compatible = "sandbox,i2c";
clock-frequency = <100000>;
eeprom@2c {
reg = <0x2c>;
compatible = "i2c-eeprom";
sandbox,emul = <&emul_eeprom>;
};
rtc_0: rtc@43 {
reg = <0x43>;
compatible = "sandbox-rtc";
sandbox,emul = <&emul0>;
};
rtc_1: rtc@61 {
reg = <0x61>;
compatible = "sandbox-rtc";
sandbox,emul = <&emul1>;
};
i2c_emul: emul {
reg = <0xff>;
compatible = "sandbox,i2c-emul-parent";
emul_eeprom: emul-eeprom {
compatible = "sandbox,i2c-eeprom";
sandbox,filename = "i2c.bin";
sandbox,size = <256>;
};
emul0: emul0 {
compatible = "sandbox,i2c-rtc";
};
emul1: emull {
compatible = "sandbox,i2c-rtc";
};
};
sandbox_pmic: sandbox_pmic {
reg = <0x40>;
sandbox,emul = <&emul_pmic0>;
};
mc34708: pmic@41 {
reg = <0x41>;
sandbox,emul = <&emul_pmic1>;
};
};
bootcount@0 {
compatible = "u-boot,bootcount-rtc";
rtc = <&rtc_1>;
offset = <0x13>;
};
adc@0 {
compatible = "sandbox,adc";
vdd-supply = <&buck2>;
vss-microvolts = <0>;
};
lcd {
u-boot,dm-pre-reloc;
compatible = "sandbox,lcd-sdl";
xres = <1366>;
yres = <768>;
};
leds {
compatible = "gpio-leds";
iracibble {
gpios = <&gpio_a 1 0>;
label = "sandbox:red";
};
martinet {
gpios = <&gpio_a 2 0>;
label = "sandbox:green";
};
default_on {
gpios = <&gpio_a 5 0>;
label = "sandbox:default_on";
default-state = "on";
};
default_off {
gpios = <&gpio_a 6 0>;
label = "sandbox:default_off";
default-state = "off";
};
};
mbox: mbox {
compatible = "sandbox,mbox";
#mbox-cells = <1>;
};
mbox-test {
compatible = "sandbox,mbox-test";
mboxes = <&mbox 100>, <&mbox 1>;
mbox-names = "other", "test";
};
cpu-test1 {
compatible = "sandbox,cpu_sandbox";
u-boot,dm-pre-reloc;
};
cpu-test2 {
compatible = "sandbox,cpu_sandbox";
u-boot,dm-pre-reloc;
};
cpu-test3 {
compatible = "sandbox,cpu_sandbox";
u-boot,dm-pre-reloc;
};
i2s: i2s {
compatible = "sandbox,i2s";
#sound-dai-cells = <1>;
sandbox,silent; /* Don't emit sounds while testing */
};
nop-test_0 {
compatible = "sandbox,nop_sandbox1";
nop-test_1 {
compatible = "sandbox,nop_sandbox2";
bind = "True";
};
nop-test_2 {
compatible = "sandbox,nop_sandbox2";
bind = "False";
};
};
misc-test {
compatible = "sandbox,misc_sandbox";
};
mmc2 {
compatible = "sandbox,mmc";
};
mmc1 {
compatible = "sandbox,mmc";
};
mmc0 {
compatible = "sandbox,mmc";
};
pch {
compatible = "sandbox,pch";
};
pci0: pci-controller0 {
compatible = "sandbox,pci";
device_type = "pci";
#address-cells = <3>;
#size-cells = <2>;
ranges = <0x02000000 0 0x10000000 0x10000000 0 0x2000
0x01000000 0 0x20000000 0x20000000 0 0x2000>;
pci@0,0 {
compatible = "pci-generic";
reg = <0x0000 0 0 0 0>;
emul@0,0 {
compatible = "sandbox,swap-case";
};
};
pci@1,0 {
compatible = "pci-generic";
reg = <0x0800 0 0 0 0>;
emul@0,0 {
compatible = "sandbox,swap-case";
use-ea;
};
};
pci@1f,0 {
compatible = "pci-generic";
reg = <0xf800 0 0 0 0>;
emul@1f,0 {
compatible = "sandbox,swap-case";
};
};
};
pci1: pci-controller1 {
compatible = "sandbox,pci";
device_type = "pci";
#address-cells = <3>;
#size-cells = <2>;
ranges = <0x02000000 0 0x30000000 0x30000000 0 0x2000
0x01000000 0 0x40000000 0x40000000 0 0x2000>;
sandbox,dev-info = <0x08 0x00 0x1234 0x5678
0x0c 0x00 0x1234 0x5678
0x10 0x00 0x1234 0x5678>;
pci@10,0 {
reg = <0x8000 0 0 0 0>;
};
};
pci2: pci-controller2 {
compatible = "sandbox,pci";
device_type = "pci";
#address-cells = <3>;
#size-cells = <2>;
ranges = <0x02000000 0 0x50000000 0x50000000 0 0x2000
0x01000000 0 0x60000000 0x60000000 0 0x2000>;
sandbox,dev-info = <0x08 0x00 0x1234 0x5678>;
pci@1f,0 {
compatible = "pci-generic";
reg = <0xf800 0 0 0 0>;
emul@1f,0 {
compatible = "sandbox,swap-case";
};
};
};
pci_ep: pci_ep {
compatible = "sandbox,pci_ep";
};
probing {
compatible = "simple-bus";
test1 {
compatible = "denx,u-boot-probe-test";
};
test2 {
compatible = "denx,u-boot-probe-test";
};
test3 {
compatible = "denx,u-boot-probe-test";
};
test4 {
compatible = "denx,u-boot-probe-test";
first-syscon = <&syscon0>;
second-sys-ctrl = <&another_system_controller>;
third-syscon = <&syscon2>;
};
};
pwrdom: power-domain {
compatible = "sandbox,power-domain";
#power-domain-cells = <1>;
};
power-domain-test {
compatible = "sandbox,power-domain-test";
power-domains = <&pwrdom 2>;
};
pwm: pwm {
compatible = "sandbox,pwm";
#pwm-cells = <2>;
};
pwm2 {
compatible = "sandbox,pwm";
#pwm-cells = <2>;
};
ram {
compatible = "sandbox,ram";
};
reset@0 {
compatible = "sandbox,warm-reset";
};
reset@1 {
compatible = "sandbox,reset";
};
resetc: reset-ctl {
compatible = "sandbox,reset-ctl";
#reset-cells = <1>;
};
reset-ctl-test {
compatible = "sandbox,reset-ctl-test";
resets = <&resetc 100>, <&resetc 2>;
reset-names = "other", "test";
};
rproc_1: rproc@1 {
compatible = "sandbox,test-processor";
remoteproc-name = "remoteproc-test-dev1";
};
rproc_2: rproc@2 {
compatible = "sandbox,test-processor";
internal-memory-mapped;
remoteproc-name = "remoteproc-test-dev2";
};
panel {
compatible = "simple-panel";
backlight = <&backlight 0 100>;
};
smem@0 {
compatible = "sandbox,smem";
};
sound {
compatible = "sandbox,sound";
cpu {
sound-dai = <&i2s 0>;
};
codec {
sound-dai = <&audio 0>;
};
};
spi@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0 1>;
compatible = "sandbox,spi";
cs-gpios = <0>, <&gpio_a 0>;
spi.bin@0 {
reg = <0>;
compatible = "spansion,m25p16", "jedec,spi-nor";
spi-max-frequency = <40000000>;
sandbox,filename = "spi.bin";
};
};
syscon0: syscon@0 {
compatible = "sandbox,syscon0";
reg = <0x10 16>;
};
another_system_controller: syscon@1 {
compatible = "sandbox,syscon1";
reg = <0x20 5
0x28 6
0x30 7
0x38 8>;
};
syscon2: syscon@2 {
compatible = "simple-mfd", "syscon";
reg = <0x40 5
0x48 6
0x50 7
0x58 8>;
};
timer {
compatible = "sandbox,timer";
clock-frequency = <1000000>;
};
tpm2 {
compatible = "sandbox,tpm2";
};
uart0: serial {
compatible = "sandbox,serial";
u-boot,dm-pre-reloc;
};
usb_0: usb@0 {
compatible = "sandbox,usb";
status = "disabled";
hub {
compatible = "sandbox,usb-hub";
#address-cells = <1>;
#size-cells = <0>;
flash-stick {
reg = <0>;
compatible = "sandbox,usb-flash";
};
};
};
usb_1: usb@1 {
compatible = "sandbox,usb";
hub {
compatible = "usb-hub";
usb,device-class = <9>;
hub-emul {
compatible = "sandbox,usb-hub";
#address-cells = <1>;
#size-cells = <0>;
flash-stick@0 {
reg = <0>;
compatible = "sandbox,usb-flash";
sandbox,filepath = "testflash.bin";
};
flash-stick@1 {
reg = <1>;
compatible = "sandbox,usb-flash";
sandbox,filepath = "testflash1.bin";
};
flash-stick@2 {
reg = <2>;
compatible = "sandbox,usb-flash";
sandbox,filepath = "testflash2.bin";
};
keyb@3 {
reg = <3>;
compatible = "sandbox,usb-keyb";
};
};
};
};
usb_2: usb@2 {
compatible = "sandbox,usb";
status = "disabled";
};
spmi: spmi@0 {
compatible = "sandbox,spmi";
#address-cells = <0x1>;
#size-cells = <0x1>;
pm8916@0 {
compatible = "qcom,spmi-pmic";
reg = <0x0 0x1>;
#address-cells = <0x1>;
#size-cells = <0x1>;
spmi_gpios: gpios@c000 {
compatible = "qcom,pm8916-gpio";
reg = <0xc000 0x400>;
gpio-controller;
gpio-count = <4>;
#gpio-cells = <2>;
gpio-bank-name="spmi";
};
};
};
wdt0: wdt@0 {
compatible = "sandbox,wdt";
};
axi: axi@0 {
compatible = "sandbox,axi";
#address-cells = <0x1>;
#size-cells = <0x1>;
store@0 {
compatible = "sandbox,sandbox_store";
reg = <0x0 0x400>;
};
};
chosen {
#address-cells = <1>;
#size-cells = <1>;
chosen-test {
compatible = "denx,u-boot-fdt-test";
reg = <9 1>;
};
};
translation-test@8000 {
compatible = "simple-bus";
reg = <0x8000 0x4000>;
#address-cells = <0x2>;
#size-cells = <0x1>;
ranges = <0 0x0 0x8000 0x1000
1 0x100 0x9000 0x1000
2 0x200 0xA000 0x1000
3 0x300 0xB000 0x1000
>;
dma-ranges = <0 0x000 0x10000000 0x1000
1 0x100 0x20000000 0x1000
>;
dev@0,0 {
compatible = "denx,u-boot-fdt-dummy";
reg = <0 0x0 0x1000>;
reg-names = "sandbox-dummy-0";
};
dev@1,100 {
compatible = "denx,u-boot-fdt-dummy";
reg = <1 0x100 0x1000>;
};
dev@2,200 {
compatible = "denx,u-boot-fdt-dummy";
reg = <2 0x200 0x1000>;
};
noxlatebus@3,300 {
compatible = "simple-bus";
reg = <3 0x300 0x1000>;
#address-cells = <0x1>;
#size-cells = <0x0>;
dev@42 {
compatible = "denx,u-boot-fdt-dummy";
reg = <0x42>;
};
};
};
osd {
compatible = "sandbox,sandbox_osd";
};
board {
compatible = "sandbox,board_sandbox";
};
sandbox_tee {
compatible = "sandbox,tee";
};
sandbox_virtio1 {
compatible = "sandbox,virtio1";
};
sandbox_virtio2 {
compatible = "sandbox,virtio2";
};
pinctrl {
compatible = "sandbox,pinctrl";
};
hwspinlock@0 {
compatible = "sandbox,hwspinlock";
};
dma: dma {
compatible = "sandbox,dma";
#dma-cells = <1>;
dmas = <&dma 0>, <&dma 1>, <&dma 2>;
dma-names = "m2m", "tx0", "rx0";
};
/*
* keep mdio-mux ahead of mdio so that the mux is removed first at the
* end of the test. If parent mdio is removed first, clean-up of the
* mux will trigger a 2nd probe of parent-mdio, leaving parent-mdio
* active at the end of the test. That it turn doesn't allow the mdio
* class to be destroyed, triggering an error.
*/
mdio-mux-test {
compatible = "sandbox,mdio-mux";
#address-cells = <1>;
#size-cells = <0>;
mdio-parent-bus = <&mdio>;
mdio-ch-test@0 {
reg = <0>;
};
mdio-ch-test@1 {
reg = <1>;
};
};
mdio: mdio-test {
compatible = "sandbox,mdio";
};
};
#include "sandbox_pmic.dtsi"