| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * (C) Copyright 2017 - Beniamino Galvani <b.galvani@gmail.com> |
| */ |
| #include <common.h> |
| #include <asm/io.h> |
| #include <clk.h> |
| #include <dm.h> |
| #include <i2c.h> |
| |
| #define I2C_TIMEOUT_MS 100 |
| |
| /* Control register fields */ |
| #define REG_CTRL_START BIT(0) |
| #define REG_CTRL_ACK_IGNORE BIT(1) |
| #define REG_CTRL_STATUS BIT(2) |
| #define REG_CTRL_ERROR BIT(3) |
| #define REG_CTRL_CLKDIV_SHIFT 12 |
| #define REG_CTRL_CLKDIV_MASK GENMASK(21, 12) |
| #define REG_CTRL_CLKDIVEXT_SHIFT 28 |
| #define REG_CTRL_CLKDIVEXT_MASK GENMASK(29, 28) |
| |
| enum { |
| TOKEN_END = 0, |
| TOKEN_START, |
| TOKEN_SLAVE_ADDR_WRITE, |
| TOKEN_SLAVE_ADDR_READ, |
| TOKEN_DATA, |
| TOKEN_DATA_LAST, |
| TOKEN_STOP, |
| }; |
| |
| struct i2c_regs { |
| u32 ctrl; |
| u32 slave_addr; |
| u32 tok_list0; |
| u32 tok_list1; |
| u32 tok_wdata0; |
| u32 tok_wdata1; |
| u32 tok_rdata0; |
| u32 tok_rdata1; |
| }; |
| |
| struct meson_i2c_data { |
| unsigned char div_factor; |
| }; |
| |
| struct meson_i2c { |
| const struct meson_i2c_data *data; |
| struct clk clk; |
| struct i2c_regs *regs; |
| struct i2c_msg *msg; /* Current I2C message */ |
| bool last; /* Whether the message is the last */ |
| uint count; /* Number of bytes in the current transfer */ |
| uint pos; /* Position of current transfer in message */ |
| u32 tokens[2]; /* Sequence of tokens to be written */ |
| uint num_tokens; /* Number of tokens to be written */ |
| }; |
| |
| static void meson_i2c_reset_tokens(struct meson_i2c *i2c) |
| { |
| i2c->tokens[0] = 0; |
| i2c->tokens[1] = 0; |
| i2c->num_tokens = 0; |
| } |
| |
| static void meson_i2c_add_token(struct meson_i2c *i2c, int token) |
| { |
| if (i2c->num_tokens < 8) |
| i2c->tokens[0] |= (token & 0xf) << (i2c->num_tokens * 4); |
| else |
| i2c->tokens[1] |= (token & 0xf) << ((i2c->num_tokens % 8) * 4); |
| |
| i2c->num_tokens++; |
| } |
| |
| /* |
| * Retrieve data for the current transfer (which can be at most 8 |
| * bytes) from the device internal buffer. |
| */ |
| static void meson_i2c_get_data(struct meson_i2c *i2c, u8 *buf, int len) |
| { |
| u32 rdata0, rdata1; |
| int i; |
| |
| rdata0 = readl(&i2c->regs->tok_rdata0); |
| rdata1 = readl(&i2c->regs->tok_rdata1); |
| |
| debug("meson i2c: read data %08x %08x len %d\n", rdata0, rdata1, len); |
| |
| for (i = 0; i < min(4, len); i++) |
| *buf++ = (rdata0 >> i * 8) & 0xff; |
| |
| for (i = 4; i < min(8, len); i++) |
| *buf++ = (rdata1 >> (i - 4) * 8) & 0xff; |
| } |
| |
| /* |
| * Write data for the current transfer (which can be at most 8 bytes) |
| * to the device internal buffer. |
| */ |
| static void meson_i2c_put_data(struct meson_i2c *i2c, u8 *buf, int len) |
| { |
| u32 wdata0 = 0, wdata1 = 0; |
| int i; |
| |
| for (i = 0; i < min(4, len); i++) |
| wdata0 |= *buf++ << (i * 8); |
| |
| for (i = 4; i < min(8, len); i++) |
| wdata1 |= *buf++ << ((i - 4) * 8); |
| |
| writel(wdata0, &i2c->regs->tok_wdata0); |
| writel(wdata1, &i2c->regs->tok_wdata1); |
| |
| debug("meson i2c: write data %08x %08x len %d\n", wdata0, wdata1, len); |
| } |
| |
| /* |
| * Prepare the next transfer: pick the next 8 bytes in the remaining |
| * part of message and write tokens and data (if needed) to the |
| * device. |
| */ |
| static void meson_i2c_prepare_xfer(struct meson_i2c *i2c) |
| { |
| bool write = !(i2c->msg->flags & I2C_M_RD); |
| int i; |
| |
| i2c->count = min(i2c->msg->len - i2c->pos, 8u); |
| |
| for (i = 0; i + 1 < i2c->count; i++) |
| meson_i2c_add_token(i2c, TOKEN_DATA); |
| |
| if (i2c->count) { |
| if (write || i2c->pos + i2c->count < i2c->msg->len) |
| meson_i2c_add_token(i2c, TOKEN_DATA); |
| else |
| meson_i2c_add_token(i2c, TOKEN_DATA_LAST); |
| } |
| |
| if (write) |
| meson_i2c_put_data(i2c, i2c->msg->buf + i2c->pos, i2c->count); |
| |
| if (i2c->last && i2c->pos + i2c->count >= i2c->msg->len) |
| meson_i2c_add_token(i2c, TOKEN_STOP); |
| |
| writel(i2c->tokens[0], &i2c->regs->tok_list0); |
| writel(i2c->tokens[1], &i2c->regs->tok_list1); |
| } |
| |
| static void meson_i2c_do_start(struct meson_i2c *i2c, struct i2c_msg *msg) |
| { |
| int token; |
| |
| token = (msg->flags & I2C_M_RD) ? TOKEN_SLAVE_ADDR_READ : |
| TOKEN_SLAVE_ADDR_WRITE; |
| |
| writel(msg->addr << 1, &i2c->regs->slave_addr); |
| meson_i2c_add_token(i2c, TOKEN_START); |
| meson_i2c_add_token(i2c, token); |
| } |
| |
| static int meson_i2c_xfer_msg(struct meson_i2c *i2c, struct i2c_msg *msg, |
| int last) |
| { |
| ulong start; |
| |
| debug("meson i2c: %s addr %u len %u\n", |
| (msg->flags & I2C_M_RD) ? "read" : "write", |
| msg->addr, msg->len); |
| |
| i2c->msg = msg; |
| i2c->last = last; |
| i2c->pos = 0; |
| i2c->count = 0; |
| |
| meson_i2c_reset_tokens(i2c); |
| meson_i2c_do_start(i2c, msg); |
| |
| do { |
| meson_i2c_prepare_xfer(i2c); |
| |
| /* start the transfer */ |
| setbits_le32(&i2c->regs->ctrl, REG_CTRL_START); |
| start = get_timer(0); |
| while (readl(&i2c->regs->ctrl) & REG_CTRL_STATUS) { |
| if (get_timer(start) > I2C_TIMEOUT_MS) { |
| clrbits_le32(&i2c->regs->ctrl, REG_CTRL_START); |
| debug("meson i2c: timeout\n"); |
| return -ETIMEDOUT; |
| } |
| udelay(1); |
| } |
| meson_i2c_reset_tokens(i2c); |
| clrbits_le32(&i2c->regs->ctrl, REG_CTRL_START); |
| |
| if (readl(&i2c->regs->ctrl) & REG_CTRL_ERROR) { |
| debug("meson i2c: error\n"); |
| return -EREMOTEIO; |
| } |
| |
| if ((msg->flags & I2C_M_RD) && i2c->count) { |
| meson_i2c_get_data(i2c, i2c->msg->buf + i2c->pos, |
| i2c->count); |
| } |
| i2c->pos += i2c->count; |
| } while (i2c->pos < msg->len); |
| |
| return 0; |
| } |
| |
| static int meson_i2c_xfer(struct udevice *bus, struct i2c_msg *msg, |
| int nmsgs) |
| { |
| struct meson_i2c *i2c = dev_get_priv(bus); |
| int i, ret = 0; |
| |
| for (i = 0; i < nmsgs; i++) { |
| ret = meson_i2c_xfer_msg(i2c, msg + i, i == nmsgs - 1); |
| if (ret) |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static int meson_i2c_set_bus_speed(struct udevice *bus, unsigned int speed) |
| { |
| struct meson_i2c *i2c = dev_get_priv(bus); |
| ulong clk_rate; |
| unsigned int div; |
| |
| clk_rate = clk_get_rate(&i2c->clk); |
| if (IS_ERR_VALUE(clk_rate)) |
| return -EINVAL; |
| |
| div = DIV_ROUND_UP(clk_rate, speed * i2c->data->div_factor); |
| |
| /* clock divider has 12 bits */ |
| if (div >= (1 << 12)) { |
| debug("meson i2c: requested bus frequency too low\n"); |
| div = (1 << 12) - 1; |
| } |
| |
| clrsetbits_le32(&i2c->regs->ctrl, REG_CTRL_CLKDIV_MASK, |
| (div & GENMASK(9, 0)) << REG_CTRL_CLKDIV_SHIFT); |
| |
| clrsetbits_le32(&i2c->regs->ctrl, REG_CTRL_CLKDIVEXT_MASK, |
| (div >> 10) << REG_CTRL_CLKDIVEXT_SHIFT); |
| |
| debug("meson i2c: set clk %u, src %lu, div %u\n", speed, clk_rate, div); |
| |
| return 0; |
| } |
| |
| static int meson_i2c_probe(struct udevice *bus) |
| { |
| struct meson_i2c *i2c = dev_get_priv(bus); |
| int ret; |
| |
| i2c->data = (const struct meson_i2c_data *)dev_get_driver_data(bus); |
| |
| ret = clk_get_by_index(bus, 0, &i2c->clk); |
| if (ret < 0) |
| return ret; |
| |
| ret = clk_enable(&i2c->clk); |
| if (ret) |
| return ret; |
| |
| i2c->regs = dev_read_addr_ptr(bus); |
| clrbits_le32(&i2c->regs->ctrl, REG_CTRL_START); |
| |
| return 0; |
| } |
| |
| static const struct dm_i2c_ops meson_i2c_ops = { |
| .xfer = meson_i2c_xfer, |
| .set_bus_speed = meson_i2c_set_bus_speed, |
| }; |
| |
| static const struct meson_i2c_data i2c_meson6_data = { |
| .div_factor = 4, |
| }; |
| |
| static const struct meson_i2c_data i2c_gxbb_data = { |
| .div_factor = 4, |
| }; |
| |
| static const struct meson_i2c_data i2c_axg_data = { |
| .div_factor = 3, |
| }; |
| |
| static const struct udevice_id meson_i2c_ids[] = { |
| {.compatible = "amlogic,meson6-i2c", .data = (ulong)&i2c_meson6_data}, |
| {.compatible = "amlogic,meson-gx-i2c", .data = (ulong)&i2c_gxbb_data}, |
| {.compatible = "amlogic,meson-gxbb-i2c", .data = (ulong)&i2c_gxbb_data}, |
| {.compatible = "amlogic,meson-axg-i2c", .data = (ulong)&i2c_axg_data}, |
| {} |
| }; |
| |
| U_BOOT_DRIVER(i2c_meson) = { |
| .name = "i2c_meson", |
| .id = UCLASS_I2C, |
| .of_match = meson_i2c_ids, |
| .probe = meson_i2c_probe, |
| .priv_auto_alloc_size = sizeof(struct meson_i2c), |
| .ops = &meson_i2c_ops, |
| }; |