| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * mtd.c |
| * |
| * Generic command to handle basic operations on any memory device. |
| * |
| * Copyright: Bootlin, 2018 |
| * Author: Miquèl Raynal <miquel.raynal@bootlin.com> |
| */ |
| |
| #include <command.h> |
| #include <common.h> |
| #include <console.h> |
| #include <malloc.h> |
| #include <mapmem.h> |
| #include <mtd.h> |
| |
| #include <linux/ctype.h> |
| |
| static struct mtd_info *get_mtd_by_name(const char *name) |
| { |
| struct mtd_info *mtd; |
| |
| mtd_probe_devices(); |
| |
| mtd = get_mtd_device_nm(name); |
| if (IS_ERR_OR_NULL(mtd)) |
| printf("MTD device %s not found, ret %ld\n", name, |
| PTR_ERR(mtd)); |
| |
| return mtd; |
| } |
| |
| static uint mtd_len_to_pages(struct mtd_info *mtd, u64 len) |
| { |
| do_div(len, mtd->writesize); |
| |
| return len; |
| } |
| |
| static bool mtd_is_aligned_with_min_io_size(struct mtd_info *mtd, u64 size) |
| { |
| return !do_div(size, mtd->writesize); |
| } |
| |
| static bool mtd_is_aligned_with_block_size(struct mtd_info *mtd, u64 size) |
| { |
| return !do_div(size, mtd->erasesize); |
| } |
| |
| static void mtd_dump_buf(const u8 *buf, uint len, uint offset) |
| { |
| int i, j; |
| |
| for (i = 0; i < len; ) { |
| printf("0x%08x:\t", offset + i); |
| for (j = 0; j < 8; j++) |
| printf("%02x ", buf[i + j]); |
| printf(" "); |
| i += 8; |
| for (j = 0; j < 8; j++) |
| printf("%02x ", buf[i + j]); |
| printf("\n"); |
| i += 8; |
| } |
| } |
| |
| static void mtd_dump_device_buf(struct mtd_info *mtd, u64 start_off, |
| const u8 *buf, u64 len, bool woob) |
| { |
| bool has_pages = mtd->type == MTD_NANDFLASH || |
| mtd->type == MTD_MLCNANDFLASH; |
| int npages = mtd_len_to_pages(mtd, len); |
| uint page; |
| |
| if (has_pages) { |
| for (page = 0; page < npages; page++) { |
| u64 data_off = page * mtd->writesize; |
| |
| printf("\nDump %d data bytes from 0x%08llx:\n", |
| mtd->writesize, start_off + data_off); |
| mtd_dump_buf(&buf[data_off], |
| mtd->writesize, start_off + data_off); |
| |
| if (woob) { |
| u64 oob_off = page * mtd->oobsize; |
| |
| printf("Dump %d OOB bytes from page at 0x%08llx:\n", |
| mtd->oobsize, start_off + data_off); |
| mtd_dump_buf(&buf[len + oob_off], |
| mtd->oobsize, 0); |
| } |
| } |
| } else { |
| printf("\nDump %lld data bytes from 0x%llx:\n", |
| len, start_off); |
| mtd_dump_buf(buf, len, start_off); |
| } |
| } |
| |
| static void mtd_show_parts(struct mtd_info *mtd, int level) |
| { |
| struct mtd_info *part; |
| int i; |
| |
| list_for_each_entry(part, &mtd->partitions, node) { |
| for (i = 0; i < level; i++) |
| printf("\t"); |
| printf(" - 0x%012llx-0x%012llx : \"%s\"\n", |
| part->offset, part->offset + part->size, part->name); |
| |
| mtd_show_parts(part, level + 1); |
| } |
| } |
| |
| static void mtd_show_device(struct mtd_info *mtd) |
| { |
| /* Device */ |
| printf("* %s\n", mtd->name); |
| #if defined(CONFIG_DM) |
| if (mtd->dev) { |
| printf(" - device: %s\n", mtd->dev->name); |
| printf(" - parent: %s\n", mtd->dev->parent->name); |
| printf(" - driver: %s\n", mtd->dev->driver->name); |
| } |
| #endif |
| |
| /* MTD device information */ |
| printf(" - type: "); |
| switch (mtd->type) { |
| case MTD_RAM: |
| printf("RAM\n"); |
| break; |
| case MTD_ROM: |
| printf("ROM\n"); |
| break; |
| case MTD_NORFLASH: |
| printf("NOR flash\n"); |
| break; |
| case MTD_NANDFLASH: |
| printf("NAND flash\n"); |
| break; |
| case MTD_DATAFLASH: |
| printf("Data flash\n"); |
| break; |
| case MTD_UBIVOLUME: |
| printf("UBI volume\n"); |
| break; |
| case MTD_MLCNANDFLASH: |
| printf("MLC NAND flash\n"); |
| break; |
| case MTD_ABSENT: |
| default: |
| printf("Unknown\n"); |
| break; |
| } |
| |
| printf(" - block size: 0x%x bytes\n", mtd->erasesize); |
| printf(" - min I/O: 0x%x bytes\n", mtd->writesize); |
| |
| if (mtd->oobsize) { |
| printf(" - OOB size: %u bytes\n", mtd->oobsize); |
| printf(" - OOB available: %u bytes\n", mtd->oobavail); |
| } |
| |
| if (mtd->ecc_strength) { |
| printf(" - ECC strength: %u bits\n", mtd->ecc_strength); |
| printf(" - ECC step size: %u bytes\n", mtd->ecc_step_size); |
| printf(" - bitflip threshold: %u bits\n", |
| mtd->bitflip_threshold); |
| } |
| |
| printf(" - 0x%012llx-0x%012llx : \"%s\"\n", |
| mtd->offset, mtd->offset + mtd->size, mtd->name); |
| |
| /* MTD partitions, if any */ |
| mtd_show_parts(mtd, 1); |
| } |
| |
| /* Logic taken from fs/ubifs/recovery.c:is_empty() */ |
| static bool mtd_oob_write_is_empty(struct mtd_oob_ops *op) |
| { |
| int i; |
| |
| for (i = 0; i < op->len; i++) |
| if (op->datbuf[i] != 0xff) |
| return false; |
| |
| for (i = 0; i < op->ooblen; i++) |
| if (op->oobbuf[i] != 0xff) |
| return false; |
| |
| return true; |
| } |
| |
| static int do_mtd_list(cmd_tbl_t *cmdtp, int flag, int argc, |
| char * const argv[]) |
| { |
| struct mtd_info *mtd; |
| int dev_nb = 0; |
| |
| /* Ensure all devices (and their partitions) are probed */ |
| mtd_probe_devices(); |
| |
| printf("List of MTD devices:\n"); |
| mtd_for_each_device(mtd) { |
| if (!mtd_is_partition(mtd)) |
| mtd_show_device(mtd); |
| |
| dev_nb++; |
| } |
| |
| if (!dev_nb) { |
| printf("No MTD device found\n"); |
| return CMD_RET_FAILURE; |
| } |
| |
| return CMD_RET_SUCCESS; |
| } |
| |
| static int mtd_special_write_oob(struct mtd_info *mtd, u64 off, |
| struct mtd_oob_ops *io_op, |
| bool write_empty_pages, bool woob) |
| { |
| int ret = 0; |
| |
| /* |
| * By default, do not write an empty page. |
| * Skip it by simulating a successful write. |
| */ |
| if (!write_empty_pages && mtd_oob_write_is_empty(io_op)) { |
| io_op->retlen = mtd->writesize; |
| io_op->oobretlen = woob ? mtd->oobsize : 0; |
| } else { |
| ret = mtd_write_oob(mtd, off, io_op); |
| } |
| |
| return ret; |
| } |
| |
| static int do_mtd_io(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) |
| { |
| bool dump, read, raw, woob, write_empty_pages, has_pages = false; |
| u64 start_off, off, len, remaining, default_len; |
| struct mtd_oob_ops io_op = {}; |
| uint user_addr = 0, npages; |
| const char *cmd = argv[0]; |
| struct mtd_info *mtd; |
| u32 oob_len; |
| u8 *buf; |
| int ret; |
| |
| if (argc < 2) |
| return CMD_RET_USAGE; |
| |
| mtd = get_mtd_by_name(argv[1]); |
| if (IS_ERR_OR_NULL(mtd)) |
| return CMD_RET_FAILURE; |
| |
| if (mtd->type == MTD_NANDFLASH || mtd->type == MTD_MLCNANDFLASH) |
| has_pages = true; |
| |
| dump = !strncmp(cmd, "dump", 4); |
| read = dump || !strncmp(cmd, "read", 4); |
| raw = strstr(cmd, ".raw"); |
| woob = strstr(cmd, ".oob"); |
| write_empty_pages = !has_pages || strstr(cmd, ".dontskipff"); |
| |
| argc -= 2; |
| argv += 2; |
| |
| if (!dump) { |
| if (!argc) { |
| ret = CMD_RET_USAGE; |
| goto out_put_mtd; |
| } |
| |
| user_addr = simple_strtoul(argv[0], NULL, 16); |
| argc--; |
| argv++; |
| } |
| |
| start_off = argc > 0 ? simple_strtoul(argv[0], NULL, 16) : 0; |
| if (!mtd_is_aligned_with_min_io_size(mtd, start_off)) { |
| printf("Offset not aligned with a page (0x%x)\n", |
| mtd->writesize); |
| ret = CMD_RET_FAILURE; |
| goto out_put_mtd; |
| } |
| |
| default_len = dump ? mtd->writesize : mtd->size; |
| len = argc > 1 ? simple_strtoul(argv[1], NULL, 16) : default_len; |
| if (!mtd_is_aligned_with_min_io_size(mtd, len)) { |
| len = round_up(len, mtd->writesize); |
| printf("Size not on a page boundary (0x%x), rounding to 0x%llx\n", |
| mtd->writesize, len); |
| } |
| |
| remaining = len; |
| npages = mtd_len_to_pages(mtd, len); |
| oob_len = woob ? npages * mtd->oobsize : 0; |
| |
| if (dump) |
| buf = kmalloc(len + oob_len, GFP_KERNEL); |
| else |
| buf = map_sysmem(user_addr, 0); |
| |
| if (!buf) { |
| printf("Could not map/allocate the user buffer\n"); |
| ret = CMD_RET_FAILURE; |
| goto out_put_mtd; |
| } |
| |
| if (has_pages) |
| printf("%s %lld byte(s) (%d page(s)) at offset 0x%08llx%s%s%s\n", |
| read ? "Reading" : "Writing", len, npages, start_off, |
| raw ? " [raw]" : "", woob ? " [oob]" : "", |
| !read && write_empty_pages ? " [dontskipff]" : ""); |
| else |
| printf("%s %lld byte(s) at offset 0x%08llx\n", |
| read ? "Reading" : "Writing", len, start_off); |
| |
| io_op.mode = raw ? MTD_OPS_RAW : MTD_OPS_AUTO_OOB; |
| io_op.len = has_pages ? mtd->writesize : len; |
| io_op.ooblen = woob ? mtd->oobsize : 0; |
| io_op.datbuf = buf; |
| io_op.oobbuf = woob ? &buf[len] : NULL; |
| |
| /* Search for the first good block after the given offset */ |
| off = start_off; |
| while (mtd_block_isbad(mtd, off)) |
| off += mtd->erasesize; |
| |
| /* Loop over the pages to do the actual read/write */ |
| while (remaining) { |
| /* Skip the block if it is bad */ |
| if (mtd_is_aligned_with_block_size(mtd, off) && |
| mtd_block_isbad(mtd, off)) { |
| off += mtd->erasesize; |
| continue; |
| } |
| |
| if (read) |
| ret = mtd_read_oob(mtd, off, &io_op); |
| else |
| ret = mtd_special_write_oob(mtd, off, &io_op, |
| write_empty_pages, woob); |
| |
| if (ret) { |
| printf("Failure while %s at offset 0x%llx\n", |
| read ? "reading" : "writing", off); |
| break; |
| } |
| |
| off += io_op.retlen; |
| remaining -= io_op.retlen; |
| io_op.datbuf += io_op.retlen; |
| io_op.oobbuf += io_op.oobretlen; |
| } |
| |
| if (!ret && dump) |
| mtd_dump_device_buf(mtd, start_off, buf, len, woob); |
| |
| if (dump) |
| kfree(buf); |
| else |
| unmap_sysmem(buf); |
| |
| if (ret) { |
| printf("%s on %s failed with error %d\n", |
| read ? "Read" : "Write", mtd->name, ret); |
| ret = CMD_RET_FAILURE; |
| } else { |
| ret = CMD_RET_SUCCESS; |
| } |
| |
| out_put_mtd: |
| put_mtd_device(mtd); |
| |
| return ret; |
| } |
| |
| static int do_mtd_erase(cmd_tbl_t *cmdtp, int flag, int argc, |
| char * const argv[]) |
| { |
| struct erase_info erase_op = {}; |
| struct mtd_info *mtd; |
| u64 off, len; |
| bool scrub; |
| int ret; |
| |
| if (argc < 2) |
| return CMD_RET_USAGE; |
| |
| mtd = get_mtd_by_name(argv[1]); |
| if (IS_ERR_OR_NULL(mtd)) |
| return CMD_RET_FAILURE; |
| |
| scrub = strstr(argv[0], ".dontskipbad"); |
| |
| argc -= 2; |
| argv += 2; |
| |
| off = argc > 0 ? simple_strtoul(argv[0], NULL, 16) : 0; |
| len = argc > 1 ? simple_strtoul(argv[1], NULL, 16) : mtd->size; |
| |
| if (!mtd_is_aligned_with_block_size(mtd, off)) { |
| printf("Offset not aligned with a block (0x%x)\n", |
| mtd->erasesize); |
| ret = CMD_RET_FAILURE; |
| goto out_put_mtd; |
| } |
| |
| if (!mtd_is_aligned_with_block_size(mtd, len)) { |
| printf("Size not a multiple of a block (0x%x)\n", |
| mtd->erasesize); |
| ret = CMD_RET_FAILURE; |
| goto out_put_mtd; |
| } |
| |
| printf("Erasing 0x%08llx ... 0x%08llx (%d eraseblock(s))\n", |
| off, off + len - 1, mtd_div_by_eb(len, mtd)); |
| |
| erase_op.mtd = mtd; |
| erase_op.addr = off; |
| erase_op.len = len; |
| erase_op.scrub = scrub; |
| |
| while (erase_op.len) { |
| ret = mtd_erase(mtd, &erase_op); |
| |
| /* Abort if its not a bad block error */ |
| if (ret != -EIO) |
| break; |
| |
| printf("Skipping bad block at 0x%08llx\n", erase_op.fail_addr); |
| |
| /* Skip bad block and continue behind it */ |
| erase_op.len -= erase_op.fail_addr - erase_op.addr; |
| erase_op.len -= mtd->erasesize; |
| erase_op.addr = erase_op.fail_addr + mtd->erasesize; |
| } |
| |
| if (ret && ret != -EIO) |
| ret = CMD_RET_FAILURE; |
| else |
| ret = CMD_RET_SUCCESS; |
| |
| out_put_mtd: |
| put_mtd_device(mtd); |
| |
| return ret; |
| } |
| |
| static int do_mtd_bad(cmd_tbl_t *cmdtp, int flag, int argc, |
| char * const argv[]) |
| { |
| struct mtd_info *mtd; |
| loff_t off; |
| |
| if (argc < 2) |
| return CMD_RET_USAGE; |
| |
| mtd = get_mtd_by_name(argv[1]); |
| if (IS_ERR_OR_NULL(mtd)) |
| return CMD_RET_FAILURE; |
| |
| if (!mtd_can_have_bb(mtd)) { |
| printf("Only NAND-based devices can have bad blocks\n"); |
| goto out_put_mtd; |
| } |
| |
| printf("MTD device %s bad blocks list:\n", mtd->name); |
| for (off = 0; off < mtd->size; off += mtd->erasesize) { |
| if (mtd_block_isbad(mtd, off)) |
| printf("\t0x%08llx\n", off); |
| } |
| |
| out_put_mtd: |
| put_mtd_device(mtd); |
| |
| return CMD_RET_SUCCESS; |
| } |
| |
| #ifdef CONFIG_AUTO_COMPLETE |
| static int mtd_name_complete(int argc, char * const argv[], char last_char, |
| int maxv, char *cmdv[]) |
| { |
| int len = 0, n_found = 0; |
| struct mtd_info *mtd; |
| |
| argc--; |
| argv++; |
| |
| if (argc > 1 || |
| (argc == 1 && (last_char == '\0' || isblank(last_char)))) |
| return 0; |
| |
| if (argc) |
| len = strlen(argv[0]); |
| |
| mtd_for_each_device(mtd) { |
| if (argc && |
| (len > strlen(mtd->name) || |
| strncmp(argv[0], mtd->name, len))) |
| continue; |
| |
| if (n_found >= maxv - 2) { |
| cmdv[n_found++] = "..."; |
| break; |
| } |
| |
| cmdv[n_found++] = mtd->name; |
| } |
| |
| cmdv[n_found] = NULL; |
| |
| return n_found; |
| } |
| #endif /* CONFIG_AUTO_COMPLETE */ |
| |
| #ifdef CONFIG_SYS_LONGHELP |
| static char mtd_help_text[] = |
| "- generic operations on memory technology devices\n\n" |
| "mtd list\n" |
| "mtd read[.raw][.oob] <name> <addr> [<off> [<size>]]\n" |
| "mtd dump[.raw][.oob] <name> [<off> [<size>]]\n" |
| "mtd write[.raw][.oob][.dontskipff] <name> <addr> [<off> [<size>]]\n" |
| "mtd erase[.dontskipbad] <name> [<off> [<size>]]\n" |
| "\n" |
| "Specific functions:\n" |
| "mtd bad <name>\n" |
| "\n" |
| "With:\n" |
| "\t<name>: NAND partition/chip name\n" |
| "\t<addr>: user address from/to which data will be retrieved/stored\n" |
| "\t<off>: offset in <name> in bytes (default: start of the part)\n" |
| "\t\t* must be block-aligned for erase\n" |
| "\t\t* must be page-aligned otherwise\n" |
| "\t<size>: length of the operation in bytes (default: the entire device)\n" |
| "\t\t* must be a multiple of a block for erase\n" |
| "\t\t* must be a multiple of a page otherwise (special case: default is a page with dump)\n" |
| "\n" |
| "The .dontskipff option forces writing empty pages, don't use it if unsure.\n"; |
| #endif |
| |
| U_BOOT_CMD_WITH_SUBCMDS(mtd, "MTD utils", mtd_help_text, |
| U_BOOT_SUBCMD_MKENT(list, 1, 1, do_mtd_list), |
| U_BOOT_SUBCMD_MKENT_COMPLETE(read, 5, 0, do_mtd_io, |
| mtd_name_complete), |
| U_BOOT_SUBCMD_MKENT_COMPLETE(write, 5, 0, do_mtd_io, |
| mtd_name_complete), |
| U_BOOT_SUBCMD_MKENT_COMPLETE(dump, 4, 0, do_mtd_io, |
| mtd_name_complete), |
| U_BOOT_SUBCMD_MKENT_COMPLETE(erase, 4, 0, do_mtd_erase, |
| mtd_name_complete), |
| U_BOOT_SUBCMD_MKENT_COMPLETE(bad, 2, 1, do_mtd_bad, |
| mtd_name_complete)); |