| /* |
| * Copyright (c) 2017-2018, ARM Limited and Contributors. All rights reserved. |
| * Copyright (c) 2018, Icenowy Zheng <icenowy@aosc.io> |
| * |
| * SPDX-License-Identifier: BSD-3-Clause |
| */ |
| |
| #include <errno.h> |
| #include <string.h> |
| |
| #include <arch_helpers.h> |
| #include <common/debug.h> |
| #include <drivers/delay_timer.h> |
| #include <drivers/mentor/mi2cv.h> |
| #include <lib/mmio.h> |
| |
| #include <sunxi_def.h> |
| #include <sunxi_mmap.h> |
| #include <sunxi_private.h> |
| |
| #define AXP805_ADDR 0x36 |
| #define AXP805_ID 0x03 |
| |
| enum pmic_type { |
| NO_PMIC, |
| AXP805, |
| }; |
| |
| enum pmic_type pmic; |
| |
| int axp_i2c_read(uint8_t chip, uint8_t reg, uint8_t *val) |
| { |
| int ret; |
| |
| ret = i2c_write(chip, 0, 0, ®, 1); |
| if (ret) |
| return ret; |
| |
| return i2c_read(chip, 0, 0, val, 1); |
| } |
| |
| int axp_i2c_write(uint8_t chip, uint8_t reg, uint8_t val) |
| { |
| return i2c_write(chip, reg, 1, &val, 1); |
| } |
| |
| static int axp805_probe(void) |
| { |
| int ret; |
| uint8_t val; |
| |
| ret = axp_i2c_write(AXP805_ADDR, 0xff, 0x0); |
| if (ret) { |
| ERROR("PMIC: Cannot put AXP805 to master mode.\n"); |
| return -EPERM; |
| } |
| |
| ret = axp_i2c_read(AXP805_ADDR, AXP805_ID, &val); |
| |
| if (!ret && ((val & 0xcf) == 0x40)) |
| NOTICE("PMIC: AXP805 detected\n"); |
| else if (ret) { |
| ERROR("PMIC: Cannot communicate with AXP805.\n"); |
| return -EPERM; |
| } else { |
| ERROR("PMIC: Non-AXP805 chip attached at AXP805's address.\n"); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| int sunxi_pmic_setup(uint16_t socid, const void *fdt) |
| { |
| int ret; |
| |
| sunxi_init_platform_r_twi(SUNXI_SOC_H6, false); |
| /* initialise mi2cv driver */ |
| i2c_init((void *)SUNXI_R_I2C_BASE); |
| |
| NOTICE("PMIC: Probing AXP805\n"); |
| pmic = AXP805; |
| |
| ret = axp805_probe(); |
| if (ret) |
| pmic = NO_PMIC; |
| else |
| pmic = AXP805; |
| |
| return 0; |
| } |
| |
| void __dead2 sunxi_power_down(void) |
| { |
| uint8_t val; |
| |
| switch (pmic) { |
| case AXP805: |
| /* Re-initialise after rich OS might have used it. */ |
| sunxi_init_platform_r_twi(SUNXI_SOC_H6, false); |
| /* initialise mi2cv driver */ |
| i2c_init((void *)SUNXI_R_I2C_BASE); |
| axp_i2c_read(AXP805_ADDR, 0x32, &val); |
| axp_i2c_write(AXP805_ADDR, 0x32, val | 0x80); |
| break; |
| default: |
| break; |
| } |
| |
| udelay(1000); |
| ERROR("PSCI: Cannot communicate with PMIC, halting\n"); |
| wfi(); |
| panic(); |
| } |