Merge changes from topic "qemu_sbsa" into integration
* changes:
qemu/qemu_sbsa: Adding memory mapping for both FLASH0/FLASH1
qemu/qemu_sbsa: Adding Qemu SBSA platform
diff --git a/docs/plat/qemu_sbsa.rst b/docs/plat/qemu_sbsa.rst
new file mode 100644
index 0000000..e04a63c
--- /dev/null
+++ b/docs/plat/qemu_sbsa.rst
@@ -0,0 +1,48 @@
+Trusted Firmware-A for QEMU SBSA target
+========================================
+
+Trusted Firmware-A (TF-A) implements the EL3 firmware layer for QEMU SBSA
+Armv8-A. While running Qemu from command line, we need to supply two Flash
+images. First Secure BootRom is supplied by -pflash argument. This Flash image
+is made by EDK2 build system by composing BL1 and FIP. Second parameter for Qemu
+is responsible for Non-secure rom which also given with -pflash argument and
+contains of UEFI and EFI variables (also made by EDK2 build system). Semihosting
+is not used
+
+When QEMU starts all CPUs are released simultaneously, BL1 selects a
+primary CPU to handle the boot and the secondaries are placed in a polling
+loop to be released by normal world via PSCI.
+
+BL2 edits the FDT, generated by QEMU at run-time to add a node describing PSCI
+and also enable methods for the CPUs.
+
+Current limitations:
+
+- Only cold boot is supported
+- No instructions for how to load a BL32 (Secure Payload)
+
+To build TF-A:
+
+::
+
+ git clone https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git tfa
+ cd tfa
+ export CROSS_COMPILE=aarch64-linux-gnu-
+ make PLAT=qemu_sbsa all fip
+
+Images will be placed at build/qemu_sbsa/release (bl1.bin and fip.bin).
+Need to copy them into top directory for EDK2 compilation.
+
+::
+
+ cp build/qemu_sbsa/release/bl1.bin ../
+ cp build/qemu_sbsa/release/fip.bin ../
+
+Those images cannot be used by itself (no semihosing support). Flash images are built by
+EDK2 build system, refer to edk2-platform repo for full build instructions.
+
+::
+
+ git clone https://github.com/tianocore/edk2-platforms.git
+ Platform/Qemu/SbsaQemu/Readme.md
+
diff --git a/plat/qemu/common/qemu_common.c b/plat/qemu/common/qemu_common.c
index 56bf953..365cfb7 100644
--- a/plat/qemu/common/qemu_common.c
+++ b/plat/qemu/common/qemu_common.c
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2015-2018, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2015-2019, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
@@ -41,6 +41,9 @@
#define MAP_FLASH0 MAP_REGION_FLAT(QEMU_FLASH0_BASE, QEMU_FLASH0_SIZE, \
MT_MEMORY | MT_RO | MT_SECURE)
+#define MAP_FLASH1 MAP_REGION_FLAT(QEMU_FLASH1_BASE, QEMU_FLASH1_SIZE, \
+ MT_MEMORY | MT_RO | MT_SECURE)
+
/*
* Table of regions for various BL stages to map using the MMU.
* This doesn't include TZRAM as the 'mem_layout' argument passed to
@@ -49,6 +52,7 @@
#ifdef IMAGE_BL1
static const mmap_region_t plat_qemu_mmap[] = {
MAP_FLASH0,
+ MAP_FLASH1,
MAP_SHARED_RAM,
MAP_DEVICE0,
#ifdef MAP_DEVICE1
@@ -63,6 +67,7 @@
#ifdef IMAGE_BL2
static const mmap_region_t plat_qemu_mmap[] = {
MAP_FLASH0,
+ MAP_FLASH1,
MAP_SHARED_RAM,
MAP_DEVICE0,
#ifdef MAP_DEVICE1
diff --git a/plat/qemu/qemu/include/platform_def.h b/plat/qemu/qemu/include/platform_def.h
index a905737..c6b4db5 100644
--- a/plat/qemu/qemu/include/platform_def.h
+++ b/plat/qemu/qemu/include/platform_def.h
@@ -170,7 +170,7 @@
#define PLAT_PHY_ADDR_SPACE_SIZE (1ULL << 32)
#define PLAT_VIRT_ADDR_SPACE_SIZE (1ULL << 32)
-#define MAX_MMAP_REGIONS 10
+#define MAX_MMAP_REGIONS 11
#define MAX_XLAT_TABLES 6
#define MAX_IO_DEVICES 3
#define MAX_IO_HANDLES 4
@@ -191,11 +191,13 @@
#define PLAT_QEMU_CONSOLE_BAUDRATE 115200
-#define QEMU_FLASH0_BASE 0x04000000
+#define QEMU_FLASH0_BASE 0x00000000
#define QEMU_FLASH0_SIZE 0x04000000
+#define QEMU_FLASH1_BASE 0x04000000
+#define QEMU_FLASH1_SIZE 0x04000000
-#define PLAT_QEMU_FIP_BASE QEMU_FLASH0_BASE
-#define PLAT_QEMU_FIP_MAX_SIZE QEMU_FLASH0_SIZE
+#define PLAT_QEMU_FIP_BASE QEMU_FLASH1_BASE
+#define PLAT_QEMU_FIP_MAX_SIZE QEMU_FLASH1_SIZE
#define DEVICE0_BASE 0x08000000
#define DEVICE0_SIZE 0x01000000
diff --git a/plat/qemu/qemu_sbsa/include/platform_def.h b/plat/qemu/qemu_sbsa/include/platform_def.h
new file mode 100644
index 0000000..333b21c
--- /dev/null
+++ b/plat/qemu/qemu_sbsa/include/platform_def.h
@@ -0,0 +1,243 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ *
+ * Copyright (c) 2019, Linaro Limited and Contributors. All rights reserved.
+ */
+
+#ifndef __PLATFORM_DEF_H__
+#define __PLATFORM_DEF_H__
+
+#include <arch.h>
+#include <plat/common/common_def.h>
+#include <tbbr_img_def.h>
+
+/* Special value used to verify platform parameters from BL2 to BL3-1 */
+#define QEMU_BL31_PLAT_PARAM_VAL 0x0f1e2d3c4b5a6978ULL
+
+#define PLATFORM_STACK_SIZE 0x1000
+
+#define PLATFORM_MAX_CPUS_PER_CLUSTER 4
+#define PLATFORM_CLUSTER_COUNT 2
+#define PLATFORM_CLUSTER0_CORE_COUNT PLATFORM_MAX_CPUS_PER_CLUSTER
+#define PLATFORM_CLUSTER1_CORE_COUNT PLATFORM_MAX_CPUS_PER_CLUSTER
+#define PLATFORM_CORE_COUNT (PLATFORM_CLUSTER0_CORE_COUNT + \
+ PLATFORM_CLUSTER1_CORE_COUNT)
+
+#define QEMU_PRIMARY_CPU 0
+
+#define PLAT_NUM_PWR_DOMAINS (PLATFORM_CLUSTER_COUNT + \
+ PLATFORM_CORE_COUNT)
+#define PLAT_MAX_PWR_LVL MPIDR_AFFLVL1
+
+#define PLAT_MAX_RET_STATE 1
+#define PLAT_MAX_OFF_STATE 2
+
+/* Local power state for power domains in Run state. */
+#define PLAT_LOCAL_STATE_RUN 0
+/* Local power state for retention. Valid only for CPU power domains */
+#define PLAT_LOCAL_STATE_RET 1
+/*
+ * Local power state for OFF/power-down. Valid for CPU and cluster power
+ * domains.
+ */
+#define PLAT_LOCAL_STATE_OFF 2
+
+/*
+ * Macros used to parse state information from State-ID if it is using the
+ * recommended encoding for State-ID.
+ */
+#define PLAT_LOCAL_PSTATE_WIDTH 4
+#define PLAT_LOCAL_PSTATE_MASK ((1 << PLAT_LOCAL_PSTATE_WIDTH) - 1)
+
+/*
+ * Some data must be aligned on the biggest cache line size in the platform.
+ * This is known only to the platform as it might have a combination of
+ * integrated and external caches.
+ */
+#define CACHE_WRITEBACK_SHIFT 6
+#define CACHE_WRITEBACK_GRANULE (1 << CACHE_WRITEBACK_SHIFT)
+
+/*
+ * Partition memory into secure ROM, non-secure DRAM, secure "SRAM",
+ * and secure DRAM.
+ */
+#define SEC_ROM_BASE 0x00000000
+#define SEC_ROM_SIZE 0x00020000
+
+#define NS_DRAM0_BASE 0x10000000000ULL
+#define NS_DRAM0_SIZE 0x00020000000
+
+#define SEC_SRAM_BASE 0x20000000
+#define SEC_SRAM_SIZE 0x20000000
+
+/*
+ * RAD just placeholders, need to be chosen after finalizing mem map
+ */
+#define SEC_DRAM_BASE 0x1000
+#define SEC_DRAM_SIZE 0x1000
+
+/* Load pageable part of OP-TEE 2MB above secure DRAM base */
+#define QEMU_OPTEE_PAGEABLE_LOAD_BASE (SEC_DRAM_BASE + 0x00200000)
+#define QEMU_OPTEE_PAGEABLE_LOAD_SIZE 0x00400000
+
+/*
+ * ARM-TF lives in SRAM, partition it here
+ */
+
+#define SHARED_RAM_BASE SEC_SRAM_BASE
+#define SHARED_RAM_SIZE 0x00001000
+
+#define PLAT_QEMU_TRUSTED_MAILBOX_BASE SHARED_RAM_BASE
+#define PLAT_QEMU_TRUSTED_MAILBOX_SIZE (8 + PLAT_QEMU_HOLD_SIZE)
+#define PLAT_QEMU_HOLD_BASE (PLAT_QEMU_TRUSTED_MAILBOX_BASE + 8)
+#define PLAT_QEMU_HOLD_SIZE (PLATFORM_CORE_COUNT * \
+ PLAT_QEMU_HOLD_ENTRY_SIZE)
+#define PLAT_QEMU_HOLD_ENTRY_SHIFT 3
+#define PLAT_QEMU_HOLD_ENTRY_SIZE (1 << PLAT_QEMU_HOLD_ENTRY_SHIFT)
+#define PLAT_QEMU_HOLD_STATE_WAIT 0
+#define PLAT_QEMU_HOLD_STATE_GO 1
+
+#define BL_RAM_BASE (SHARED_RAM_BASE + SHARED_RAM_SIZE)
+#define BL_RAM_SIZE (SEC_SRAM_SIZE - SHARED_RAM_SIZE)
+
+/*
+ * BL1 specific defines.
+ *
+ * BL1 RW data is relocated from ROM to RAM at runtime so we need 2 sets of
+ * addresses.
+ * Put BL1 RW at the top of the Secure SRAM. BL1_RW_BASE is calculated using
+ * the current BL1 RW debug size plus a little space for growth.
+ */
+#define BL1_RO_BASE SEC_ROM_BASE
+#define BL1_RO_LIMIT (SEC_ROM_BASE + SEC_ROM_SIZE)
+#define BL1_RW_BASE (BL1_RW_LIMIT - 0x12000)
+#define BL1_RW_LIMIT (BL_RAM_BASE + BL_RAM_SIZE)
+
+/*
+ * BL2 specific defines.
+ *
+ * Put BL2 just below BL3-1. BL2_BASE is calculated using the current BL2 debug
+ * size plus a little space for growth.
+ */
+#define BL2_BASE (BL31_BASE - 0x1D000)
+#define BL2_LIMIT BL31_BASE
+
+/*
+ * BL3-1 specific defines.
+ *
+ * Put BL3-1 at the top of the Trusted SRAM. BL31_BASE is calculated using the
+ * current BL3-1 debug size plus a little space for growth.
+ */
+#define BL31_BASE (BL31_LIMIT - 0x20000)
+#define BL31_LIMIT (BL_RAM_BASE + BL_RAM_SIZE)
+#define BL31_PROGBITS_LIMIT BL1_RW_BASE
+
+
+/*
+ * BL3-2 specific defines.
+ *
+ * BL3-2 can execute from Secure SRAM, or Secure DRAM.
+ */
+#define BL32_SRAM_BASE BL_RAM_BASE
+#define BL32_SRAM_LIMIT BL31_BASE
+#define BL32_DRAM_BASE SEC_DRAM_BASE
+#define BL32_DRAM_LIMIT (SEC_DRAM_BASE + SEC_DRAM_SIZE)
+
+#define BL32_MEM_BASE BL_RAM_BASE
+#define BL32_MEM_SIZE BL_RAM_SIZE
+#define BL32_BASE BL32_SRAM_BASE
+#define BL32_LIMIT BL32_SRAM_LIMIT
+
+#define NS_IMAGE_OFFSET (NS_DRAM0_BASE + 0x20000000)
+#define NS_IMAGE_MAX_SIZE (NS_DRAM0_SIZE - 0x20000000)
+
+#define PLAT_PHY_ADDR_SPACE_SIZE (1ull << 42)
+#define PLAT_VIRT_ADDR_SPACE_SIZE (1ull << 42)
+#define MAX_MMAP_REGIONS 11
+#define MAX_XLAT_TABLES 10
+#define MAX_IO_DEVICES 3
+#define MAX_IO_HANDLES 4
+
+/*
+ * PL011 related constants
+ */
+#define UART0_BASE 0x60000000
+#define UART1_BASE 0x60030000
+#define UART0_CLK_IN_HZ 1
+#define UART1_CLK_IN_HZ 1
+
+#define PLAT_QEMU_BOOT_UART_BASE UART0_BASE
+#define PLAT_QEMU_BOOT_UART_CLK_IN_HZ UART0_CLK_IN_HZ
+
+#define PLAT_QEMU_CRASH_UART_BASE UART1_BASE
+#define PLAT_QEMU_CRASH_UART_CLK_IN_HZ UART1_CLK_IN_HZ
+
+#define PLAT_QEMU_CONSOLE_BAUDRATE 115200
+
+#define QEMU_FLASH0_BASE 0x00000000
+#define QEMU_FLASH0_SIZE 0x10000000
+#define QEMU_FLASH1_BASE 0x10000000
+#define QEMU_FLASH1_SIZE 0x10000000
+
+#define PLAT_QEMU_FIP_BASE 0x00008000
+#define PLAT_QEMU_FIP_MAX_SIZE 0x00020000
+
+/* This is map from GIC_DIST up to last CPU (255) GIC_REDISTR */
+#define DEVICE0_BASE 0x40000000
+#define DEVICE0_SIZE 0x04080000
+/* This is map from NORMAL_UART up to SECURE_UART_MM */
+#define DEVICE1_BASE 0x60000000
+#define DEVICE1_SIZE 0x00041000
+
+/*
+ * GIC related constants
+ * We use GICv3 where CPU Interface registers are not memory mapped
+ */
+#define GICD_BASE 0x40060000
+#define GICR_BASE 0x40080000
+#define GICC_BASE 0x0
+
+#define QEMU_IRQ_SEC_SGI_0 8
+#define QEMU_IRQ_SEC_SGI_1 9
+#define QEMU_IRQ_SEC_SGI_2 10
+#define QEMU_IRQ_SEC_SGI_3 11
+#define QEMU_IRQ_SEC_SGI_4 12
+#define QEMU_IRQ_SEC_SGI_5 13
+#define QEMU_IRQ_SEC_SGI_6 14
+#define QEMU_IRQ_SEC_SGI_7 15
+
+/******************************************************************************
+ * On a GICv2 system, the Group 1 secure interrupts are treated as Group 0
+ * interrupts.
+ *****************************************************************************/
+#define PLATFORM_G1S_PROPS(grp) \
+ INTR_PROP_DESC(QEMU_IRQ_SEC_SGI_0, GIC_HIGHEST_SEC_PRIORITY, \
+ grp, GIC_INTR_CFG_EDGE), \
+ INTR_PROP_DESC(QEMU_IRQ_SEC_SGI_1, GIC_HIGHEST_SEC_PRIORITY, \
+ grp, GIC_INTR_CFG_EDGE), \
+ INTR_PROP_DESC(QEMU_IRQ_SEC_SGI_2, GIC_HIGHEST_SEC_PRIORITY, \
+ grp, GIC_INTR_CFG_EDGE), \
+ INTR_PROP_DESC(QEMU_IRQ_SEC_SGI_3, GIC_HIGHEST_SEC_PRIORITY, \
+ grp, GIC_INTR_CFG_EDGE), \
+ INTR_PROP_DESC(QEMU_IRQ_SEC_SGI_4, GIC_HIGHEST_SEC_PRIORITY, \
+ grp, GIC_INTR_CFG_EDGE), \
+ INTR_PROP_DESC(QEMU_IRQ_SEC_SGI_5, GIC_HIGHEST_SEC_PRIORITY, \
+ grp, GIC_INTR_CFG_EDGE), \
+ INTR_PROP_DESC(QEMU_IRQ_SEC_SGI_6, GIC_HIGHEST_SEC_PRIORITY, \
+ grp, GIC_INTR_CFG_EDGE), \
+ INTR_PROP_DESC(QEMU_IRQ_SEC_SGI_7, GIC_HIGHEST_SEC_PRIORITY, \
+ grp, GIC_INTR_CFG_EDGE)
+
+#define PLATFORM_G0_PROPS(grp)
+
+/*
+ * DT related constants
+ */
+#define PLAT_QEMU_DT_BASE NS_DRAM0_BASE
+#define PLAT_QEMU_DT_MAX_SIZE 0x10000
+
+/*
+ * System counter
+ */
+#define SYS_COUNTER_FREQ_IN_TICKS ((1000 * 1000 * 1000) / 16)
+
+#endif /* __PLATFORM_DEF_H__ */
diff --git a/plat/qemu/qemu_sbsa/platform.mk b/plat/qemu/qemu_sbsa/platform.mk
new file mode 100644
index 0000000..0d6047d
--- /dev/null
+++ b/plat/qemu/qemu_sbsa/platform.mk
@@ -0,0 +1,101 @@
+#
+# Copyright (c) 2019, Linaro Limited and Contributors. All rights reserved.
+#
+# SPDX-License-Identifier: BSD-3-Clause
+#
+
+CRASH_REPORTING := 1
+
+include lib/libfdt/libfdt.mk
+
+# Enable new version of image loading on QEMU platforms
+LOAD_IMAGE_V2 := 1
+
+ifeq ($(NEED_BL32),yes)
+$(eval $(call add_define,QEMU_LOAD_BL32))
+endif
+
+PLAT_QEMU_PATH := plat/qemu/qemu_sbsa
+PLAT_QEMU_COMMON_PATH := plat/qemu/common
+PLAT_INCLUDES := -Iinclude/plat/arm/common/ \
+ -I${PLAT_QEMU_COMMON_PATH}/include \
+ -I${PLAT_QEMU_PATH}/include \
+ -Iinclude/common/tbbr
+
+PLAT_INCLUDES += -Iinclude/plat/arm/common/${ARCH}
+
+PLAT_BL_COMMON_SOURCES := ${PLAT_QEMU_COMMON_PATH}/qemu_common.c \
+ ${PLAT_QEMU_COMMON_PATH}/qemu_console.c \
+ drivers/arm/pl011/${ARCH}/pl011_console.S
+
+include lib/xlat_tables_v2/xlat_tables.mk
+PLAT_BL_COMMON_SOURCES += ${XLAT_TABLES_LIB_SRCS}
+
+BL1_SOURCES += drivers/io/io_semihosting.c \
+ drivers/io/io_storage.c \
+ drivers/io/io_fip.c \
+ drivers/io/io_memmap.c \
+ lib/semihosting/semihosting.c \
+ lib/semihosting/${ARCH}/semihosting_call.S \
+ ${PLAT_QEMU_COMMON_PATH}/qemu_io_storage.c \
+ ${PLAT_QEMU_COMMON_PATH}/${ARCH}/plat_helpers.S \
+ ${PLAT_QEMU_COMMON_PATH}/qemu_bl1_setup.c
+
+BL1_SOURCES += lib/cpus/aarch64/aem_generic.S \
+ lib/cpus/aarch64/cortex_a53.S \
+ lib/cpus/aarch64/cortex_a57.S
+
+BL2_SOURCES += drivers/io/io_semihosting.c \
+ drivers/io/io_storage.c \
+ drivers/io/io_fip.c \
+ drivers/io/io_memmap.c \
+ lib/semihosting/semihosting.c \
+ lib/semihosting/${ARCH}/semihosting_call.S \
+ ${PLAT_QEMU_COMMON_PATH}/qemu_io_storage.c \
+ ${PLAT_QEMU_COMMON_PATH}/${ARCH}/plat_helpers.S \
+ ${PLAT_QEMU_COMMON_PATH}/qemu_bl2_setup.c \
+ common/fdt_fixup.c \
+ $(LIBFDT_SRCS)
+ifeq (${LOAD_IMAGE_V2},1)
+BL2_SOURCES += ${PLAT_QEMU_COMMON_PATH}/qemu_bl2_mem_params_desc.c \
+ ${PLAT_QEMU_COMMON_PATH}/qemu_image_load.c \
+ common/desc_image_load.c
+endif
+
+QEMU_GIC_SOURCES := drivers/arm/gic/v3/gicv3_helpers.c \
+ drivers/arm/gic/v3/gicv3_main.c \
+ drivers/arm/gic/common/gic_common.c \
+ plat/common/plat_gicv3.c \
+ ${PLAT_QEMU_COMMON_PATH}/qemu_gicv3.c
+
+BL31_SOURCES += lib/cpus/aarch64/aem_generic.S \
+ lib/cpus/aarch64/cortex_a53.S \
+ lib/cpus/aarch64/cortex_a57.S \
+ plat/common/plat_psci_common.c \
+ ${PLAT_QEMU_COMMON_PATH}/qemu_pm.c \
+ ${PLAT_QEMU_COMMON_PATH}/topology.c \
+ ${PLAT_QEMU_COMMON_PATH}/aarch64/plat_helpers.S \
+ ${PLAT_QEMU_COMMON_PATH}/qemu_bl31_setup.c \
+ ${QEMU_GIC_SOURCES}
+
+SEPARATE_CODE_AND_RODATA := 1
+ENABLE_STACK_PROTECTOR := 0
+ifneq ($(ENABLE_STACK_PROTECTOR), 0)
+ PLAT_BL_COMMON_SOURCES += ${PLAT_QEMU_COMMON_PATH}/qemu_stack_protector.c
+endif
+
+MULTI_CONSOLE_API := 1
+
+# Disable the PSCI platform compatibility layer
+ENABLE_PLAT_COMPAT := 0
+
+# Use known base for UEFI if not given from command line
+# By default BL33 is at FLASH1 base
+PRELOADED_BL33_BASE ?= 0x10000000
+
+# Qemu SBSA plafrom only support SEC_SRAM
+BL32_RAM_LOCATION_ID = SEC_SRAM_ID
+$(eval $(call add_define,BL32_RAM_LOCATION_ID))
+
+# Do not enable SVE
+ENABLE_SVE_FOR_NS := 0