blob: 3cf5c3605703ea9c9db2fc13805752e7c1f222dc [file] [log] [blame]
/*
* Copyright (c) 2018-2019, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#include <assert.h>
#include <platform_def.h>
#include <common/debug.h>
#include <drivers/console.h>
#include <drivers/mmc.h>
#include <lib/utils.h>
#include <imx_caam.h>
#include <imx_clock.h>
#include <imx_io_mux.h>
#include <imx_uart.h>
#include <imx_usdhc.h>
#include <imx7_def.h>
#define UART5_CLK_SELECT (CCM_TARGET_ROOT_ENABLE |\
CCM_TRGT_MUX_UART5_CLK_ROOT_OSC_24M)
#define USDHC_CLK_SELECT (CCM_TARGET_ROOT_ENABLE |\
CCM_TRGT_MUX_NAND_USDHC_BUS_CLK_ROOT_AHB |\
CCM_TARGET_POST_PODF(2))
#define USB_CLK_SELECT (CCM_TARGET_ROOT_ENABLE |\
CCM_TRGT_MUX_USB_HSIC_CLK_ROOT_SYS_PLL)
#define PICOPI_UART5_RX_MUX \
IOMUXC_SW_MUX_CTL_PAD_I2C4_SCL_ALT1_UART5_RX_DATA
#define PICOPI_UART5_TX_MUX \
IOMUXC_SW_MUX_CTL_PAD_I2C4_SDA_ALT1_UART5_TX_DATA
#define PICOPI_SD3_FEATURES \
(IOMUXC_SW_PAD_CTL_PAD_SD3_PU_47K | \
IOMUXC_SW_PAD_CTL_PAD_SD3_PE | \
IOMUXC_SW_PAD_CTL_PAD_SD3_HYS | \
IOMUXC_SW_PAD_CTL_PAD_SD3_SLEW_SLOW | \
IOMUXC_SW_PAD_CTL_PAD_SD3_DSE_3_X6)
static void picopi_setup_pinmux(void)
{
/* Configure UART5 TX */
imx_io_muxc_set_pad_alt_function(IOMUXC_SW_MUX_CTL_PAD_I2C4_SDA_OFFSET,
PICOPI_UART5_TX_MUX);
/* Configure UART5 RX */
imx_io_muxc_set_pad_alt_function(IOMUXC_SW_MUX_CTL_PAD_I2C4_SCL_OFFSET,
PICOPI_UART5_RX_MUX);
/* Configure USDHC3 */
imx_io_muxc_set_pad_alt_function(IOMUXC_SW_MUX_CTL_PAD_SD3_CLK_OFFSET, 0);
imx_io_muxc_set_pad_alt_function(IOMUXC_SW_MUX_CTL_PAD_SD3_CMD_OFFSET, 0);
imx_io_muxc_set_pad_alt_function(IOMUXC_SW_MUX_CTL_PAD_SD3_DATA0_OFFSET, 0);
imx_io_muxc_set_pad_alt_function(IOMUXC_SW_MUX_CTL_PAD_SD3_DATA1_OFFSET, 0);
imx_io_muxc_set_pad_alt_function(IOMUXC_SW_MUX_CTL_PAD_SD3_DATA2_OFFSET, 0);
imx_io_muxc_set_pad_alt_function(IOMUXC_SW_MUX_CTL_PAD_SD3_DATA3_OFFSET, 0);
imx_io_muxc_set_pad_alt_function(IOMUXC_SW_MUX_CTL_PAD_SD3_DATA4_OFFSET, 0);
imx_io_muxc_set_pad_alt_function(IOMUXC_SW_MUX_CTL_PAD_SD3_DATA5_OFFSET, 0);
imx_io_muxc_set_pad_alt_function(IOMUXC_SW_MUX_CTL_PAD_SD3_DATA6_OFFSET, 0);
imx_io_muxc_set_pad_alt_function(IOMUXC_SW_MUX_CTL_PAD_SD3_DATA7_OFFSET, 0);
imx_io_muxc_set_pad_alt_function(IOMUXC_SW_MUX_CTL_PAD_GPIO1_IO14_OFFSET,
IOMUXC_SW_MUX_CTL_PAD_GPIO1_IO14_ALT1_SD3_CD_B);
imx_io_muxc_set_pad_features(IOMUXC_SW_PAD_CTL_PAD_SD3_CLK_OFFSET,
PICOPI_SD3_FEATURES);
imx_io_muxc_set_pad_features(IOMUXC_SW_PAD_CTL_PAD_SD3_CMD_OFFSET,
PICOPI_SD3_FEATURES);
imx_io_muxc_set_pad_features(IOMUXC_SW_PAD_CTL_PAD_SD3_DATA0_OFFSET,
PICOPI_SD3_FEATURES);
imx_io_muxc_set_pad_features(IOMUXC_SW_PAD_CTL_PAD_SD3_DATA1_OFFSET,
PICOPI_SD3_FEATURES);
imx_io_muxc_set_pad_features(IOMUXC_SW_PAD_CTL_PAD_SD3_DATA2_OFFSET,
PICOPI_SD3_FEATURES);
imx_io_muxc_set_pad_features(IOMUXC_SW_PAD_CTL_PAD_SD3_DATA3_OFFSET,
PICOPI_SD3_FEATURES);
imx_io_muxc_set_pad_features(IOMUXC_SW_PAD_CTL_PAD_SD3_DATA4_OFFSET,
PICOPI_SD3_FEATURES);
imx_io_muxc_set_pad_features(IOMUXC_SW_PAD_CTL_PAD_SD3_DATA5_OFFSET,
PICOPI_SD3_FEATURES);
imx_io_muxc_set_pad_features(IOMUXC_SW_PAD_CTL_PAD_SD3_DATA6_OFFSET,
PICOPI_SD3_FEATURES);
imx_io_muxc_set_pad_features(IOMUXC_SW_PAD_CTL_PAD_SD3_DATA7_OFFSET,
PICOPI_SD3_FEATURES);
imx_io_muxc_set_pad_features(IOMUXC_SW_PAD_CTL_PAD_GPIO1_IO14_OFFSET,
PICOPI_SD3_FEATURES);
}
static void picopi_usdhc_setup(void)
{
imx_usdhc_params_t params;
struct mmc_device_info info;
zeromem(&params, sizeof(imx_usdhc_params_t));
params.reg_base = PLAT_PICOPI_BOOT_MMC_BASE;
params.clk_rate = 25000000;
params.bus_width = MMC_BUS_WIDTH_8;
info.mmc_dev_type = MMC_IS_EMMC;
imx_usdhc_init(&params, &info);
}
static void picopi_setup_usb_clocks(void)
{
uint32_t usb_en_bits = (uint32_t)USB_CLK_SELECT;
imx_clock_set_usb_clk_root_bits(usb_en_bits);
imx_clock_enable_usb(CCM_CCGR_ID_USB_IPG);
imx_clock_enable_usb(CCM_CCGR_ID_USB_PHY_480MCLK);
imx_clock_enable_usb(CCM_CCGR_ID_USB_OTG1_PHY);
imx_clock_enable_usb(CCM_CCGR_ID_USB_OTG2_PHY);
}
void imx7_platform_setup(u_register_t arg1, u_register_t arg2,
u_register_t arg3, u_register_t arg4)
{
uint32_t uart5_en_bits = (uint32_t)UART5_CLK_SELECT;
uint32_t usdhc_clock_sel = PLAT_PICOPI_SD - 1;
/* Initialize clocks etc */
imx_clock_enable_uart(4, uart5_en_bits);
imx_clock_enable_usdhc(usdhc_clock_sel, USDHC_CLK_SELECT);
picopi_setup_usb_clocks();
/* Setup pin-muxes */
picopi_setup_pinmux();
picopi_usdhc_setup();
}