blob: bd3f46fcca8260abe7075215c51b410af2fc6b02 [file] [log] [blame]
/*
* Copyright (c) 2015-2017, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#include <assert.h>
#include <platform_def.h>
#include <arch.h>
#include <arch_helpers.h>
#include <common/debug.h>
#include <drivers/delay_timer.h>
#include <denver.h>
#include <lib/mmio.h>
#include <lib/psci/psci.h>
#include <flowctrl.h>
#include <pmc.h>
#include <tegra_def.h>
#include <tegra_private.h>
/*
* Register used to clear CPU reset signals. Each CPU has two reset
* signals: CPU reset (3:0) and Core reset (19:16)
*/
#define CPU_CMPLX_RESET_CLR 0x344
#define CPU_CORE_RESET_MASK 0x10001
/* Clock and Reset controller registers for system clock's settings */
#define SCLK_RATE 0x30
#define SCLK_BURST_POLICY 0x28
#define SCLK_BURST_POLICY_DEFAULT 0x10000000
static int cpu_powergate_mask[PLATFORM_MAX_CPUS_PER_CLUSTER];
int32_t tegra_soc_validate_power_state(unsigned int power_state,
psci_power_state_t *req_state)
{
int state_id = psci_get_pstate_id(power_state);
int cpu = read_mpidr() & MPIDR_CPU_MASK;
/*
* Sanity check the requested state id, power level and CPU number.
* Currently T132 only supports SYSTEM_SUSPEND on last standing CPU
* i.e. CPU 0
*/
if ((state_id != PSTATE_ID_SOC_POWERDN) || (cpu != 0)) {
ERROR("unsupported state id @ power level\n");
return PSCI_E_INVALID_PARAMS;
}
/* Set lower power states to PLAT_MAX_OFF_STATE */
for (uint32_t i = MPIDR_AFFLVL0; i < PLAT_MAX_PWR_LVL; i++)
req_state->pwr_domain_state[i] = PLAT_MAX_OFF_STATE;
/* Set the SYSTEM_SUSPEND state-id */
req_state->pwr_domain_state[PLAT_MAX_PWR_LVL] =
PSTATE_ID_SOC_POWERDN;
return PSCI_E_SUCCESS;
}
int tegra_soc_pwr_domain_on(u_register_t mpidr)
{
int cpu = mpidr & MPIDR_CPU_MASK;
uint32_t mask = CPU_CORE_RESET_MASK << cpu;
if (cpu_powergate_mask[cpu] == 0) {
/* Deassert CPU reset signals */
mmio_write_32(TEGRA_CAR_RESET_BASE + CPU_CMPLX_RESET_CLR, mask);
/* Power on CPU using PMC */
tegra_pmc_cpu_on(cpu);
/* Fill in the CPU powergate mask */
cpu_powergate_mask[cpu] = 1;
} else {
/* Power on CPU using Flow Controller */
tegra_fc_cpu_on(cpu);
}
return PSCI_E_SUCCESS;
}
int tegra_soc_pwr_domain_on_finish(const psci_power_state_t *target_state)
{
/*
* Lock scratch registers which hold the CPU vectors
*/
tegra_pmc_lock_cpu_vectors();
return PSCI_E_SUCCESS;
}
int tegra_soc_pwr_domain_off(const psci_power_state_t *target_state)
{
uint64_t val;
tegra_fc_cpu_off(read_mpidr() & MPIDR_CPU_MASK);
/* Disable DCO operations */
denver_disable_dco();
/* Power down the CPU */
val = read_actlr_el1() & ~ACTLR_EL1_PMSTATE_MASK;
write_actlr_el1(val | DENVER_CPU_STATE_POWER_DOWN);
return PSCI_E_SUCCESS;
}
int tegra_soc_pwr_domain_suspend(const psci_power_state_t *target_state)
{
uint64_t val;
#if ENABLE_ASSERTIONS
int cpu = read_mpidr() & MPIDR_CPU_MASK;
/* SYSTEM_SUSPEND only on CPU0 */
assert(cpu == 0);
#endif
/* Allow restarting CPU #1 using PMC on suspend exit */
cpu_powergate_mask[1] = 0;
/* Program FC to enter suspend state */
tegra_fc_cpu_powerdn(read_mpidr());
/* Disable DCO operations */
denver_disable_dco();
/* Program the suspend state ID */
val = read_actlr_el1() & ~ACTLR_EL1_PMSTATE_MASK;
write_actlr_el1(val | target_state->pwr_domain_state[PLAT_MAX_PWR_LVL]);
return PSCI_E_SUCCESS;
}
int tegra_soc_prepare_system_reset(void)
{
/*
* Set System Clock (SCLK) to POR default so that the clock source
* for the PMC APB clock would not be changed due to system reset.
*/
mmio_write_32((uintptr_t)TEGRA_CAR_RESET_BASE + SCLK_BURST_POLICY,
SCLK_BURST_POLICY_DEFAULT);
mmio_write_32((uintptr_t)TEGRA_CAR_RESET_BASE + SCLK_RATE, 0);
/* Wait 1 ms to make sure clock source/device logic is stabilized. */
mdelay(1);
return PSCI_E_SUCCESS;
}