blob: cae36c9d8fc8d1fdf15455b1ae357ba087626a0e [file] [log] [blame]
/*
* Copyright (c) 2013-2018, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
/* ZynqMP power management enums and defines */
#ifndef PM_DEFS_H
#define PM_DEFS_H
/*********************************************************************
* Macro definitions
********************************************************************/
/*
* Version number is a 32bit value, like:
* (PM_VERSION_MAJOR << 16) | PM_VERSION_MINOR
*/
#define PM_VERSION_MAJOR 1
#define PM_VERSION_MINOR 0
#define PM_VERSION ((PM_VERSION_MAJOR << 16) | PM_VERSION_MINOR)
/* Capabilities for RAM */
#define PM_CAP_ACCESS 0x1U
#define PM_CAP_CONTEXT 0x2U
#define MAX_LATENCY (~0U)
#define MAX_QOS 100U
/* State arguments of the self suspend */
#define PM_STATE_CPU_IDLE 0x0U
#define PM_STATE_SUSPEND_TO_RAM 0xFU
/*********************************************************************
* Enum definitions
********************************************************************/
enum pm_api_id {
/* Miscellaneous API functions: */
PM_GET_API_VERSION = 1, /* Do not change or move */
PM_SET_CONFIGURATION,
PM_GET_NODE_STATUS,
PM_GET_OP_CHARACTERISTIC,
PM_REGISTER_NOTIFIER,
/* API for suspending of PUs: */
PM_REQ_SUSPEND,
PM_SELF_SUSPEND,
PM_FORCE_POWERDOWN,
PM_ABORT_SUSPEND,
PM_REQ_WAKEUP,
PM_SET_WAKEUP_SOURCE,
PM_SYSTEM_SHUTDOWN,
/* API for managing PM slaves: */
PM_REQ_NODE,
PM_RELEASE_NODE,
PM_SET_REQUIREMENT,
PM_SET_MAX_LATENCY,
/* Direct control API functions: */
PM_RESET_ASSERT,
PM_RESET_GET_STATUS,
PM_MMIO_WRITE,
PM_MMIO_READ,
PM_INIT_FINALIZE,
PM_FPGA_LOAD,
PM_FPGA_GET_STATUS,
PM_GET_CHIPID,
PM_SECURE_RSA_AES,
PM_SECURE_SHA,
PM_SECURE_RSA,
PM_PINCTRL_REQUEST,
PM_PINCTRL_RELEASE,
PM_PINCTRL_GET_FUNCTION,
PM_PINCTRL_SET_FUNCTION,
PM_PINCTRL_CONFIG_PARAM_GET,
PM_PINCTRL_CONFIG_PARAM_SET,
PM_IOCTL,
/* API to query information from firmware */
PM_QUERY_DATA,
/* Clock control API functions */
PM_CLOCK_ENABLE,
PM_CLOCK_DISABLE,
PM_CLOCK_GETSTATE,
PM_CLOCK_SETDIVIDER,
PM_CLOCK_GETDIVIDER,
PM_CLOCK_SETRATE,
PM_CLOCK_GETRATE,
PM_CLOCK_SETPARENT,
PM_CLOCK_GETPARENT,
PM_SECURE_IMAGE,
/* FPGA PL Readback */
PM_FPGA_READ,
PM_SECURE_AES,
/* PLL control API functions */
PM_PLL_SET_PARAMETER,
PM_PLL_GET_PARAMETER,
PM_PLL_SET_MODE,
PM_PLL_GET_MODE,
PM_API_MAX
};
enum pm_node_id {
NODE_UNKNOWN = 0,
NODE_APU,
NODE_APU_0,
NODE_APU_1,
NODE_APU_2,
NODE_APU_3,
NODE_RPU,
NODE_RPU_0,
NODE_RPU_1,
NODE_PLD,
NODE_FPD,
NODE_OCM_BANK_0,
NODE_OCM_BANK_1,
NODE_OCM_BANK_2,
NODE_OCM_BANK_3,
NODE_TCM_0_A,
NODE_TCM_0_B,
NODE_TCM_1_A,
NODE_TCM_1_B,
NODE_L2,
NODE_GPU_PP_0,
NODE_GPU_PP_1,
NODE_USB_0,
NODE_USB_1,
NODE_TTC_0,
NODE_TTC_1,
NODE_TTC_2,
NODE_TTC_3,
NODE_SATA,
NODE_ETH_0,
NODE_ETH_1,
NODE_ETH_2,
NODE_ETH_3,
NODE_UART_0,
NODE_UART_1,
NODE_SPI_0,
NODE_SPI_1,
NODE_I2C_0,
NODE_I2C_1,
NODE_SD_0,
NODE_SD_1,
NODE_DP,
NODE_GDMA,
NODE_ADMA,
NODE_NAND,
NODE_QSPI,
NODE_GPIO,
NODE_CAN_0,
NODE_CAN_1,
NODE_EXTERN,
NODE_APLL,
NODE_VPLL,
NODE_DPLL,
NODE_RPLL,
NODE_IOPLL,
NODE_DDR,
NODE_IPI_APU,
NODE_IPI_RPU_0,
NODE_GPU,
NODE_PCIE,
NODE_PCAP,
NODE_RTC,
NODE_LPD,
NODE_VCU,
NODE_IPI_RPU_1,
NODE_IPI_PL_0,
NODE_IPI_PL_1,
NODE_IPI_PL_2,
NODE_IPI_PL_3,
NODE_PL,
NODE_GEM_TSU,
NODE_SWDT_0,
NODE_SWDT_1,
NODE_CSU,
NODE_PJTAG,
NODE_TRACE,
NODE_TESTSCAN,
NODE_PMU,
NODE_MAX,
};
enum pm_request_ack {
REQ_ACK_NO = 1,
REQ_ACK_BLOCKING,
REQ_ACK_NON_BLOCKING,
};
enum pm_abort_reason {
ABORT_REASON_WKUP_EVENT = 100,
ABORT_REASON_PU_BUSY,
ABORT_REASON_NO_PWRDN,
ABORT_REASON_UNKNOWN,
};
enum pm_suspend_reason {
SUSPEND_REASON_PU_REQ = 201,
SUSPEND_REASON_ALERT,
SUSPEND_REASON_SYS_SHUTDOWN,
};
enum pm_ram_state {
PM_RAM_STATE_OFF = 1,
PM_RAM_STATE_RETENTION,
PM_RAM_STATE_ON,
};
enum pm_opchar_type {
PM_OPCHAR_TYPE_POWER = 1,
PM_OPCHAR_TYPE_TEMP,
PM_OPCHAR_TYPE_LATENCY,
};
/**
* @PM_RET_SUCCESS: success
* @PM_RET_ERROR_ARGS: illegal arguments provided
* @PM_RET_ERROR_ACCESS: access rights violation
* @PM_RET_ERROR_TIMEOUT: timeout in communication with PMU
* @PM_RET_ERROR_NOTSUPPORTED: feature not supported
* @PM_RET_ERROR_PROC: node is not a processor node
* @PM_RET_ERROR_API_ID: illegal API ID
* @PM_RET_ERROR_OTHER: other error
*/
enum pm_ret_status {
PM_RET_SUCCESS,
PM_RET_ERROR_ARGS,
PM_RET_ERROR_ACCESS,
PM_RET_ERROR_TIMEOUT,
PM_RET_ERROR_NOTSUPPORTED,
PM_RET_ERROR_PROC,
PM_RET_ERROR_API_ID,
PM_RET_ERROR_FAILURE,
PM_RET_ERROR_COMMUNIC,
PM_RET_ERROR_DOUBLEREQ,
PM_RET_ERROR_OTHER,
};
/**
* @PM_INITIAL_BOOT: boot is a fresh system startup
* @PM_RESUME: boot is a resume
* @PM_BOOT_ERROR: error, boot cause cannot be identified
*/
enum pm_boot_status {
PM_INITIAL_BOOT,
PM_RESUME,
PM_BOOT_ERROR,
};
/**
* @PMF_SHUTDOWN_TYPE_SHUTDOWN: shutdown
* @PMF_SHUTDOWN_TYPE_RESET: reset/reboot
* @PMF_SHUTDOWN_TYPE_SETSCOPE_ONLY: set the shutdown/reboot scope
*/
enum pm_shutdown_type {
PMF_SHUTDOWN_TYPE_SHUTDOWN,
PMF_SHUTDOWN_TYPE_RESET,
PMF_SHUTDOWN_TYPE_SETSCOPE_ONLY,
};
/**
* @PMF_SHUTDOWN_SUBTYPE_SUBSYSTEM: shutdown/reboot APU subsystem only
* @PMF_SHUTDOWN_SUBTYPE_PS_ONLY: shutdown/reboot entire PS (but not PL)
* @PMF_SHUTDOWN_SUBTYPE_SYSTEM: shutdown/reboot entire system
*/
enum pm_shutdown_subtype {
PMF_SHUTDOWN_SUBTYPE_SUBSYSTEM,
PMF_SHUTDOWN_SUBTYPE_PS_ONLY,
PMF_SHUTDOWN_SUBTYPE_SYSTEM,
};
/**
* @PM_PLL_PARAM_DIV2: Enable for divide by 2 function inside the PLL
* @PM_PLL_PARAM_FBDIV: Feedback divisor integer portion for the PLL
* @PM_PLL_PARAM_DATA: Feedback divisor fractional portion for the PLL
* @PM_PLL_PARAM_PRE_SRC: Clock source for PLL input
* @PM_PLL_PARAM_POST_SRC: Clock source for PLL Bypass mode
* @PM_PLL_PARAM_LOCK_DLY: Lock circuit config settings for lock windowsize
* @PM_PLL_PARAM_LOCK_CNT: Lock circuit counter setting
* @PM_PLL_PARAM_LFHF: PLL loop filter high frequency capacitor control
* @PM_PLL_PARAM_CP: PLL charge pump control
* @PM_PLL_PARAM_RES: PLL loop filter resistor control
*/
enum pm_pll_param {
PM_PLL_PARAM_DIV2,
PM_PLL_PARAM_FBDIV,
PM_PLL_PARAM_DATA,
PM_PLL_PARAM_PRE_SRC,
PM_PLL_PARAM_POST_SRC,
PM_PLL_PARAM_LOCK_DLY,
PM_PLL_PARAM_LOCK_CNT,
PM_PLL_PARAM_LFHF,
PM_PLL_PARAM_CP,
PM_PLL_PARAM_RES,
PM_PLL_PARAM_MAX,
};
/**
* @PM_PLL_MODE_RESET: PLL is in reset (not locked)
* @PM_PLL_MODE_INTEGER: PLL is locked in integer mode
* @PM_PLL_MODE_FRACTIONAL: PLL is locked in fractional mode
*/
enum pm_pll_mode {
PM_PLL_MODE_RESET,
PM_PLL_MODE_INTEGER,
PM_PLL_MODE_FRACTIONAL,
PM_PLL_MODE_MAX,
};
/**
* @PM_CLOCK_DIV0_ID: Clock divider 0
* @PM_CLOCK_DIV1_ID: Clock divider 1
*/
enum pm_clock_div_id {
PM_CLOCK_DIV0_ID,
PM_CLOCK_DIV1_ID,
};
#endif /* PM_DEFS_H */