blob: 2a2d102f7a8c5990aa86a4305883c1638cf1098d [file] [log] [blame]
/*
* Copyright (c) 2015-2019, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#include <arch_helpers.h>
#include <assert.h>
#include <cortex_a57.h>
#include <common/bl_common.h>
#include <common/debug.h>
#include <common/interrupt_props.h>
#include <drivers/console.h>
#include <lib/xlat_tables/xlat_tables_v2.h>
#include <drivers/arm/gic_common.h>
#include <drivers/arm/gicv2.h>
#include <bl31/interrupt_mgmt.h>
#include <bpmp.h>
#include <flowctrl.h>
#include <memctrl.h>
#include <plat/common/platform.h>
#include <security_engine.h>
#include <tegra_def.h>
#include <tegra_platform.h>
#include <tegra_private.h>
/* sets of MMIO ranges setup */
#define MMIO_RANGE_0_ADDR 0x50000000
#define MMIO_RANGE_1_ADDR 0x60000000
#define MMIO_RANGE_2_ADDR 0x70000000
#define MMIO_RANGE_SIZE 0x200000
/*
* Table of regions to map using the MMU.
*/
static const mmap_region_t tegra_mmap[] = {
MAP_REGION_FLAT(TEGRA_IRAM_BASE, 0x40000, /* 256KB */
MT_DEVICE | MT_RW | MT_SECURE),
MAP_REGION_FLAT(MMIO_RANGE_0_ADDR, MMIO_RANGE_SIZE,
MT_DEVICE | MT_RW | MT_SECURE),
MAP_REGION_FLAT(MMIO_RANGE_1_ADDR, MMIO_RANGE_SIZE,
MT_DEVICE | MT_RW | MT_SECURE),
MAP_REGION_FLAT(MMIO_RANGE_2_ADDR, MMIO_RANGE_SIZE,
MT_DEVICE | MT_RW | MT_SECURE),
{0}
};
/*******************************************************************************
* Set up the pagetables as per the platform memory map & initialize the MMU
******************************************************************************/
const mmap_region_t *plat_get_mmio_map(void)
{
/* Add the map region for security engine SE2 */
if (tegra_chipid_is_t210_b01()) {
mmap_add_region((uint64_t)TEGRA_SE2_BASE,
(uint64_t)TEGRA_SE2_BASE,
(uint64_t)TEGRA_SE2_RANGE_SIZE,
MT_DEVICE | MT_RW | MT_SECURE);
}
/* MMIO space */
return tegra_mmap;
}
/*******************************************************************************
* The Tegra power domain tree has a single system level power domain i.e. a
* single root node. The first entry in the power domain descriptor specifies
* the number of power domains at the highest power level.
*******************************************************************************
*/
const unsigned char tegra_power_domain_tree_desc[] = {
/* No of root nodes */
1,
/* No of clusters */
PLATFORM_CLUSTER_COUNT,
/* No of CPU cores - cluster0 */
PLATFORM_MAX_CPUS_PER_CLUSTER,
/* No of CPU cores - cluster1 */
PLATFORM_MAX_CPUS_PER_CLUSTER
};
/*******************************************************************************
* This function returns the Tegra default topology tree information.
******************************************************************************/
const unsigned char *plat_get_power_domain_tree_desc(void)
{
return tegra_power_domain_tree_desc;
}
/*******************************************************************************
* Handler to get the System Counter Frequency
******************************************************************************/
unsigned int plat_get_syscnt_freq2(void)
{
return 19200000;
}
/*******************************************************************************
* Maximum supported UART controllers
******************************************************************************/
#define TEGRA210_MAX_UART_PORTS 5
/*******************************************************************************
* This variable holds the UART port base addresses
******************************************************************************/
static uint32_t tegra210_uart_addresses[TEGRA210_MAX_UART_PORTS + 1] = {
0, /* undefined - treated as an error case */
TEGRA_UARTA_BASE,
TEGRA_UARTB_BASE,
TEGRA_UARTC_BASE,
TEGRA_UARTD_BASE,
TEGRA_UARTE_BASE,
};
/*******************************************************************************
* Retrieve the UART controller base to be used as the console
******************************************************************************/
uint32_t plat_get_console_from_id(int id)
{
if (id > TEGRA210_MAX_UART_PORTS)
return 0;
return tegra210_uart_addresses[id];
}
/*******************************************************************************
* Handler for early platform setup
******************************************************************************/
void plat_early_platform_setup(void)
{
const plat_params_from_bl2_t *plat_params = bl31_get_plat_params();
uint64_t val;
/* platform parameter passed by the previous bootloader */
if (plat_params->l2_ecc_parity_prot_dis != 1) {
/* Enable ECC Parity Protection for Cortex-A57 CPUs */
val = read_l2ctlr_el1();
val |= (uint64_t)CORTEX_A57_L2_ECC_PARITY_PROTECTION_BIT;
write_l2ctlr_el1(val);
}
/* Initialize security engine driver */
if (tegra_chipid_is_t210_b01()) {
tegra_se_init();
}
}
/* Secure IRQs for Tegra186 */
static const interrupt_prop_t tegra210_interrupt_props[] = {
INTR_PROP_DESC(TEGRA210_WDT_CPU_LEGACY_FIQ, GIC_HIGHEST_SEC_PRIORITY,
GICV2_INTR_GROUP0, GIC_INTR_CFG_EDGE),
};
void plat_late_platform_setup(void)
{
const plat_params_from_bl2_t *plat_params = bl31_get_plat_params();
uint64_t sc7entry_end, offset;
int ret;
uint32_t val;
/* memmap TZDRAM area containing the SC7 Entry Firmware */
if (plat_params->sc7entry_fw_base && plat_params->sc7entry_fw_size) {
assert(plat_params->sc7entry_fw_size <= TEGRA_IRAM_A_SIZE);
/*
* Verify that the SC7 entry firmware resides inside the TZDRAM
* aperture, _before_ the BL31 code and the start address is
* exactly 1MB from BL31 base.
*/
/* sc7entry-fw must be _before_ BL31 base */
assert(plat_params->tzdram_base > plat_params->sc7entry_fw_base);
sc7entry_end = plat_params->sc7entry_fw_base +
plat_params->sc7entry_fw_size;
assert(sc7entry_end < plat_params->tzdram_base);
/* sc7entry-fw start must be exactly 1MB behind BL31 base */
offset = plat_params->tzdram_base - plat_params->sc7entry_fw_base;
assert(offset == 0x100000);
/* secure TZDRAM area */
tegra_memctrl_tzdram_setup(plat_params->sc7entry_fw_base,
plat_params->tzdram_size + offset);
/* power off BPMP processor until SC7 entry */
tegra_fc_bpmp_off();
/* memmap SC7 entry firmware code */
ret = mmap_add_dynamic_region(plat_params->sc7entry_fw_base,
plat_params->sc7entry_fw_base,
plat_params->sc7entry_fw_size,
MT_SECURE | MT_RO_DATA);
assert(ret == 0);
/* restrict PMC access to secure world */
val = mmio_read_32(TEGRA_MISC_BASE + APB_SLAVE_SECURITY_ENABLE);
val |= PMC_SECURITY_EN_BIT;
mmio_write_32(TEGRA_MISC_BASE + APB_SLAVE_SECURITY_ENABLE, val);
}
}
/*******************************************************************************
* Initialize the GIC and SGIs
******************************************************************************/
void plat_gic_setup(void)
{
tegra_gic_setup(tegra210_interrupt_props, ARRAY_SIZE(tegra210_interrupt_props));
tegra_gic_init();
/* Enable handling for FIQs */
tegra_fiq_handler_setup();
/*
* Enable routing watchdog FIQs from the flow controller to
* the GICD.
*/
tegra_fc_enable_fiq_to_ccplex_routing();
}