rpi3: Move rpi3_hw.h header file to include/rpi_hw.h
With the advent of Raspberry Pi 4 support, we need to separate some
board specific headers between the RPi3 and RPi4.
Rename and move the "rpi3_hw.h" header, so that .c files just include
rpi_hw.h, and automatically get the correct version.
Change-Id: I03b39063028d2bee1429bffccde71dddfe2dcde8
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
diff --git a/plat/rpi/rpi3/aarch64/plat_helpers.S b/plat/rpi/rpi3/aarch64/plat_helpers.S
index 7974b60..556d872 100644
--- a/plat/rpi/rpi3/aarch64/plat_helpers.S
+++ b/plat/rpi/rpi3/aarch64/plat_helpers.S
@@ -9,7 +9,7 @@
#include <assert_macros.S>
#include <platform_def.h>
-#include "../rpi3_hw.h"
+#include "../include/rpi_hw.h"
.globl plat_crash_console_flush
.globl plat_crash_console_init
diff --git a/plat/rpi/rpi3/include/platform_def.h b/plat/rpi/rpi3/include/platform_def.h
index 4d90222..2a12fe7 100644
--- a/plat/rpi/rpi3/include/platform_def.h
+++ b/plat/rpi/rpi3/include/platform_def.h
@@ -12,7 +12,7 @@
#include <lib/utils_def.h>
#include <plat/common/common_def.h>
-#include "../rpi3_hw.h"
+#include "rpi_hw.h"
/* Special value used to verify platform parameters from BL2 to BL31 */
#define RPI3_BL31_PLAT_PARAM_VAL ULL(0x0F1E2D3C4B5A6978)
diff --git a/plat/rpi/rpi3/rpi3_hw.h b/plat/rpi/rpi3/include/rpi_hw.h
similarity index 97%
rename from plat/rpi/rpi3/rpi3_hw.h
rename to plat/rpi/rpi3/include/rpi_hw.h
index 1a86835..7a3ea57 100644
--- a/plat/rpi/rpi3/rpi3_hw.h
+++ b/plat/rpi/rpi3/include/rpi_hw.h
@@ -4,8 +4,8 @@
* SPDX-License-Identifier: BSD-3-Clause
*/
-#ifndef RPI3_HW_H
-#define RPI3_HW_H
+#ifndef RPI_HW_H
+#define RPI_HW_H
#include <lib/utils_def.h>
@@ -107,4 +107,4 @@
#define RPI3_INTC_PENDING_FIQ_OFFSET ULL(0x00000070)
#define RPI3_INTC_PENDING_FIQ_MBOX3 ULL(0x00000080)
-#endif /* RPI3_HW_H */
+#endif /* RPI_HW_H */
diff --git a/plat/rpi/rpi3/rpi3_common.c b/plat/rpi/rpi3/rpi3_common.c
index 9b10974..85a26c2 100644
--- a/plat/rpi/rpi3/rpi3_common.c
+++ b/plat/rpi/rpi3/rpi3_common.c
@@ -16,7 +16,7 @@
#include <drivers/ti/uart/uart_16550.h>
#include <lib/xlat_tables/xlat_tables_v2.h>
-#include "rpi3_hw.h"
+#include <rpi_hw.h>
#include "rpi3_private.h"
#define MAP_DEVICE0 MAP_REGION_FLAT(DEVICE0_BASE, \
diff --git a/plat/rpi/rpi3/rpi3_mbox.c b/plat/rpi/rpi3/rpi3_mbox.c
index 2db605e..03b395e 100644
--- a/plat/rpi/rpi3/rpi3_mbox.c
+++ b/plat/rpi/rpi3/rpi3_mbox.c
@@ -12,7 +12,7 @@
#include <common/debug.h>
#include <lib/mmio.h>
-#include "rpi3_hw.h"
+#include <rpi_hw.h>
/* This struct must be aligned to 16 bytes */
typedef struct __packed __aligned(16) rpi3_mbox_request {
diff --git a/plat/rpi/rpi3/rpi3_pm.c b/plat/rpi/rpi3/rpi3_pm.c
index 4f586b5..b79e273 100644
--- a/plat/rpi/rpi3/rpi3_pm.c
+++ b/plat/rpi/rpi3/rpi3_pm.c
@@ -15,7 +15,7 @@
#include <lib/psci/psci.h>
#include <plat/common/platform.h>
-#include "rpi3_hw.h"
+#include <rpi_hw.h>
/* Make composite power state parameter till power level 0 */
#if PSCI_EXTENDED_STATE_ID
diff --git a/plat/rpi/rpi3/rpi3_rng.c b/plat/rpi/rpi3/rpi3_rng.c
index fd69adb..b6bf005 100644
--- a/plat/rpi/rpi3/rpi3_rng.c
+++ b/plat/rpi/rpi3/rpi3_rng.c
@@ -9,7 +9,7 @@
#include <lib/mmio.h>
-#include "rpi3_hw.h"
+#include <rpi_hw.h>
/* Initial amount of values to discard */
#define RNG_WARMUP_COUNT U(0x40000)
