| /* |
| * Copyright (c) 2017-2018, ARM Limited and Contributors. All rights reserved. |
| * |
| * SPDX-License-Identifier: BSD-3-Clause |
| */ |
| #include <asm_macros.S> |
| |
| #define CONSOLE_NUM_BYTES_SHIFT 24 |
| #define CONSOLE_FLUSH_DATA_TO_PORT (1 << 26) |
| #define CONSOLE_RING_DOORBELL (1 << 31) |
| #define CONSOLE_IS_BUSY (1 << 31) |
| #define CONSOLE_WRITE (CONSOLE_RING_DOORBELL | CONSOLE_FLUSH_DATA_TO_PORT) |
| |
| /* |
| * This file contains a driver implementation to make use of the |
| * real console implementation provided by the SPE firmware running |
| * SoCs after Tegra186. |
| * |
| * This console is shared by multiple components and the SPE firmware |
| * finally displays everything on the UART port. |
| */ |
| |
| .globl console_core_init |
| .globl console_core_putc |
| .globl console_core_getc |
| .globl console_core_flush |
| |
| /* ----------------------------------------------- |
| * int console_core_init(uintptr_t base_addr, |
| * unsigned int uart_clk, unsigned int baud_rate) |
| * Function to initialize the console without a |
| * C Runtime to print debug information. This |
| * function will be accessed by console_init and |
| * crash reporting. |
| * In: x0 - console base address |
| * w1 - Uart clock in Hz |
| * w2 - Baud rate |
| * Out: return 1 on success else 0 on error |
| * Clobber list : x1, x2 |
| * ----------------------------------------------- |
| */ |
| func console_core_init |
| /* Check the input base address */ |
| cbz x0, core_init_fail |
| mov w0, #1 |
| ret |
| core_init_fail: |
| mov w0, wzr |
| ret |
| endfunc console_core_init |
| |
| /* -------------------------------------------------------- |
| * int console_core_putc(int c, uintptr_t base_addr) |
| * Function to output a character over the console. It |
| * returns the character printed on success or -1 on error. |
| * In : w0 - character to be printed |
| * x1 - console base address |
| * Out : return -1 on error else return character. |
| * Clobber list : x2 |
| * -------------------------------------------------------- |
| */ |
| func console_core_putc |
| /* Check the input parameter */ |
| cbz x1, putc_error |
| |
| /* Prepend '\r' to '\n' */ |
| cmp w0, #0xA |
| b.ne 2f |
| |
| /* wait until spe is ready */ |
| 1: ldr w2, [x1] |
| and w2, w2, #CONSOLE_IS_BUSY |
| cbnz w2, 1b |
| |
| /* spe is ready */ |
| mov w2, #0xD /* '\r' */ |
| and w2, w2, #0xFF |
| mov w3, #(CONSOLE_WRITE | (1 << CONSOLE_NUM_BYTES_SHIFT)) |
| orr w2, w2, w3 |
| str w2, [x1] |
| |
| /* wait until spe is ready */ |
| 2: ldr w2, [x1] |
| and w2, w2, #CONSOLE_IS_BUSY |
| cbnz w2, 2b |
| |
| /* spe is ready */ |
| mov w2, w0 |
| and w2, w2, #0xFF |
| mov w3, #(CONSOLE_WRITE | (1 << CONSOLE_NUM_BYTES_SHIFT)) |
| orr w2, w2, w3 |
| str w2, [x1] |
| |
| ret |
| putc_error: |
| mov w0, #-1 |
| ret |
| endfunc console_core_putc |
| |
| /* --------------------------------------------- |
| * int console_core_getc(uintptr_t base_addr) |
| * Function to get a character from the console. |
| * It returns the character grabbed on success |
| * or -1 on error. |
| * In : x0 - console base address |
| * Clobber list : x0, x1 |
| * --------------------------------------------- |
| */ |
| func console_core_getc |
| mov w0, #-1 |
| ret |
| endfunc console_core_getc |
| |
| /* --------------------------------------------- |
| * int console_core_flush(uintptr_t base_addr) |
| * Function to force a write of all buffered |
| * data that hasn't been output. |
| * In : x0 - console base address |
| * Out : return -1 on error else return 0. |
| * Clobber list : x0, x1 |
| * --------------------------------------------- |
| */ |
| func console_core_flush |
| cbz x0, flush_error |
| |
| /* flush console */ |
| mov w1, #CONSOLE_WRITE |
| str w1, [x0] |
| mov w0, #0 |
| ret |
| flush_error: |
| mov w0, #-1 |
| ret |
| endfunc console_core_flush |