blob: d47e4e0969505b5e94f03a870aa318d98edc3bc9 [file] [log] [blame]
/*
* Copyright (c) 2015-2019, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#ifndef ARM_MACROS_S
#define ARM_MACROS_S
#include <drivers/arm/gic_common.h>
#include <drivers/arm/gicv2.h>
#include <drivers/arm/gicv3.h>
#include <platform_def.h>
.section .rodata.gic_reg_name, "aS"
/* Applicable only to GICv2 and GICv3 with SRE disabled (legacy mode) */
gicc_regs:
.asciz "gicc_hppir", "gicc_ahppir", "gicc_ctlr", ""
/* Applicable only to GICv3 with SRE enabled */
icc_regs:
.asciz "icc_hppir0_el1", "icc_hppir1_el1", "icc_ctlr_el3", ""
/* Registers common to both GICv2 and GICv3 */
gicd_pend_reg:
.asciz "gicd_ispendr regs (Offsets 0x200-0x278)\nOffset\t\t\tValue\n"
newline:
.asciz "\n"
spacer:
.asciz ":\t\t 0x"
prefix:
.asciz "0x"
/* ---------------------------------------------
* The below utility macro prints out relevant GIC
* registers whenever an unhandled exception is
* taken in BL31 on ARM standard platforms.
* Expects: GICD base in x16, GICC base in x17
* Clobbers: x0 - x10, sp
* ---------------------------------------------
*/
.macro arm_print_gic_regs
/* Check for GICv3 system register access */
mrs x7, id_aa64pfr0_el1
ubfx x7, x7, #ID_AA64PFR0_GIC_SHIFT, #ID_AA64PFR0_GIC_WIDTH
cmp x7, #1
b.ne print_gicv2
/* Check for SRE enable */
mrs x8, ICC_SRE_EL3
tst x8, #ICC_SRE_SRE_BIT
b.eq print_gicv2
/* Load the icc reg list to x6 */
adr x6, icc_regs
/* Load the icc regs to gp regs used by str_in_crash_buf_print */
mrs x8, ICC_HPPIR0_EL1
mrs x9, ICC_HPPIR1_EL1
mrs x10, ICC_CTLR_EL3
/* Store to the crash buf and print to console */
bl str_in_crash_buf_print
b print_gic_common
print_gicv2:
/* Load the gicc reg list to x6 */
adr x6, gicc_regs
/* Load the gicc regs to gp regs used by str_in_crash_buf_print */
ldr w8, [x17, #GICC_HPPIR]
ldr w9, [x17, #GICC_AHPPIR]
ldr w10, [x17, #GICC_CTLR]
/* Store to the crash buf and print to console */
bl str_in_crash_buf_print
print_gic_common:
/* Print the GICD_ISPENDR regs */
add x7, x16, #GICD_ISPENDR
adr x4, gicd_pend_reg
bl asm_print_str
gicd_ispendr_loop:
sub x4, x7, x16
cmp x4, #0x280
b.eq exit_print_gic_regs
/* Print "0x" */
adr x4, prefix
bl asm_print_str
/* Print offset */
sub x4, x7, x16
mov x5, #12
bl asm_print_hex_bits
adr x4, spacer
bl asm_print_str
ldr x4, [x7], #8
bl asm_print_hex
adr x4, newline
bl asm_print_str
b gicd_ispendr_loop
exit_print_gic_regs:
.endm
#endif /* ARM_MACROS_S */