blob: 2dd10ad8328e67bfe537e5182feb22806ae95d47 [file] [log] [blame]
/*
* Copyright (c) 2015-2018, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#ifndef PLATFORM_DEF_H
#define PLATFORM_DEF_H
#include <arch.h>
#include <common/tbbr/tbbr_img_def.h>
#include <lib/utils_def.h>
#include <plat/common/common_def.h>
/* Special value used to verify platform parameters from BL2 to BL3-1 */
#define QEMU_BL31_PLAT_PARAM_VAL 0x0f1e2d3c4b5a6978ULL
#define PLATFORM_STACK_SIZE 0x1000
#if ARM_ARCH_MAJOR == 7
#define PLATFORM_MAX_CPUS_PER_CLUSTER 4
#define PLATFORM_CLUSTER_COUNT 1
#define PLATFORM_CLUSTER0_CORE_COUNT PLATFORM_MAX_CPUS_PER_CLUSTER
#define PLATFORM_CLUSTER1_CORE_COUNT 0
#else
#define PLATFORM_MAX_CPUS_PER_CLUSTER 4
#define PLATFORM_CLUSTER_COUNT 2
#define PLATFORM_CLUSTER0_CORE_COUNT PLATFORM_MAX_CPUS_PER_CLUSTER
#define PLATFORM_CLUSTER1_CORE_COUNT PLATFORM_MAX_CPUS_PER_CLUSTER
#endif
#define PLATFORM_CORE_COUNT (PLATFORM_CLUSTER0_CORE_COUNT + \
PLATFORM_CLUSTER1_CORE_COUNT)
#define QEMU_PRIMARY_CPU 0
#define PLAT_NUM_PWR_DOMAINS (PLATFORM_CLUSTER_COUNT + \
PLATFORM_CORE_COUNT)
#define PLAT_MAX_PWR_LVL MPIDR_AFFLVL1
#define PLAT_MAX_RET_STATE U(1)
#define PLAT_MAX_OFF_STATE U(2)
/* Local power state for power domains in Run state. */
#define PLAT_LOCAL_STATE_RUN U(0)
/* Local power state for retention. Valid only for CPU power domains */
#define PLAT_LOCAL_STATE_RET U(1)
/*
* Local power state for OFF/power-down. Valid for CPU and cluster power
* domains.
*/
#define PLAT_LOCAL_STATE_OFF 2
/*
* Macros used to parse state information from State-ID if it is using the
* recommended encoding for State-ID.
*/
#define PLAT_LOCAL_PSTATE_WIDTH 4
#define PLAT_LOCAL_PSTATE_MASK ((1 << PLAT_LOCAL_PSTATE_WIDTH) - 1)
/*
* Some data must be aligned on the biggest cache line size in the platform.
* This is known only to the platform as it might have a combination of
* integrated and external caches.
*/
#define CACHE_WRITEBACK_SHIFT 6
#define CACHE_WRITEBACK_GRANULE (1 << CACHE_WRITEBACK_SHIFT)
/*
* Partition memory into secure ROM, non-secure DRAM, secure "SRAM",
* and secure DRAM.
*/
#define SEC_ROM_BASE 0x00000000
#define SEC_ROM_SIZE 0x00020000
#define NS_DRAM0_BASE 0x40000000
#define NS_DRAM0_SIZE 0x3de00000
#define SEC_SRAM_BASE 0x0e000000
#define SEC_SRAM_SIZE 0x00060000
#define SEC_DRAM_BASE 0x0e100000
#define SEC_DRAM_SIZE 0x00f00000
/* Load pageable part of OP-TEE 2MB above secure DRAM base */
#define QEMU_OPTEE_PAGEABLE_LOAD_BASE (SEC_DRAM_BASE + 0x00200000)
#define QEMU_OPTEE_PAGEABLE_LOAD_SIZE 0x00400000
/*
* ARM-TF lives in SRAM, partition it here
*/
#define SHARED_RAM_BASE SEC_SRAM_BASE
#define SHARED_RAM_SIZE 0x00001000
#define PLAT_QEMU_TRUSTED_MAILBOX_BASE SHARED_RAM_BASE
#define PLAT_QEMU_TRUSTED_MAILBOX_SIZE (8 + PLAT_QEMU_HOLD_SIZE)
#define PLAT_QEMU_HOLD_BASE (PLAT_QEMU_TRUSTED_MAILBOX_BASE + 8)
#define PLAT_QEMU_HOLD_SIZE (PLATFORM_CORE_COUNT * \
PLAT_QEMU_HOLD_ENTRY_SIZE)
#define PLAT_QEMU_HOLD_ENTRY_SHIFT 3
#define PLAT_QEMU_HOLD_ENTRY_SIZE (1 << PLAT_QEMU_HOLD_ENTRY_SHIFT)
#define PLAT_QEMU_HOLD_STATE_WAIT 0
#define PLAT_QEMU_HOLD_STATE_GO 1
#define BL_RAM_BASE (SHARED_RAM_BASE + SHARED_RAM_SIZE)
#define BL_RAM_SIZE (SEC_SRAM_SIZE - SHARED_RAM_SIZE)
/*
* BL1 specific defines.
*
* BL1 RW data is relocated from ROM to RAM at runtime so we need 2 sets of
* addresses.
* Put BL1 RW at the top of the Secure SRAM. BL1_RW_BASE is calculated using
* the current BL1 RW debug size plus a little space for growth.
*/
#define BL1_RO_BASE SEC_ROM_BASE
#define BL1_RO_LIMIT (SEC_ROM_BASE + SEC_ROM_SIZE)
#define BL1_RW_BASE (BL1_RW_LIMIT - 0x12000)
#define BL1_RW_LIMIT (BL_RAM_BASE + BL_RAM_SIZE)
/*
* BL2 specific defines.
*
* Put BL2 just below BL3-1. BL2_BASE is calculated using the current BL2 debug
* size plus a little space for growth.
*/
#define BL2_BASE (BL31_BASE - 0x25000)
#define BL2_LIMIT BL31_BASE
/*
* BL3-1 specific defines.
*
* Put BL3-1 at the top of the Trusted SRAM. BL31_BASE is calculated using the
* current BL3-1 debug size plus a little space for growth.
*/
#define BL31_BASE (BL31_LIMIT - 0x20000)
#define BL31_LIMIT (BL_RAM_BASE + BL_RAM_SIZE)
#define BL31_PROGBITS_LIMIT BL1_RW_BASE
/*
* BL3-2 specific defines.
*
* BL3-2 can execute from Secure SRAM, or Secure DRAM.
*/
#define BL32_SRAM_BASE BL_RAM_BASE
#define BL32_SRAM_LIMIT BL31_BASE
#define BL32_DRAM_BASE SEC_DRAM_BASE
#define BL32_DRAM_LIMIT (SEC_DRAM_BASE + SEC_DRAM_SIZE)
#define SEC_SRAM_ID 0
#define SEC_DRAM_ID 1
#if BL32_RAM_LOCATION_ID == SEC_SRAM_ID
# define BL32_MEM_BASE BL_RAM_BASE
# define BL32_MEM_SIZE BL_RAM_SIZE
# define BL32_BASE BL32_SRAM_BASE
# define BL32_LIMIT BL32_SRAM_LIMIT
#elif BL32_RAM_LOCATION_ID == SEC_DRAM_ID
# define BL32_MEM_BASE SEC_DRAM_BASE
# define BL32_MEM_SIZE SEC_DRAM_SIZE
# define BL32_BASE BL32_DRAM_BASE
# define BL32_LIMIT BL32_DRAM_LIMIT
#else
# error "Unsupported BL32_RAM_LOCATION_ID value"
#endif
#define NS_IMAGE_OFFSET 0x60000000
#define PLAT_PHY_ADDR_SPACE_SIZE (1ULL << 32)
#define PLAT_VIRT_ADDR_SPACE_SIZE (1ULL << 32)
#define MAX_MMAP_REGIONS 10
#define MAX_XLAT_TABLES 6
#define MAX_IO_DEVICES 3
#define MAX_IO_HANDLES 4
/*
* PL011 related constants
*/
#define UART0_BASE 0x09000000
#define UART1_BASE 0x09040000
#define UART0_CLK_IN_HZ 1
#define UART1_CLK_IN_HZ 1
#define PLAT_QEMU_BOOT_UART_BASE UART0_BASE
#define PLAT_QEMU_BOOT_UART_CLK_IN_HZ UART0_CLK_IN_HZ
#define PLAT_QEMU_CRASH_UART_BASE UART1_BASE
#define PLAT_QEMU_CRASH_UART_CLK_IN_HZ UART1_CLK_IN_HZ
#define PLAT_QEMU_CONSOLE_BAUDRATE 115200
#define QEMU_FLASH0_BASE 0x04000000
#define QEMU_FLASH0_SIZE 0x04000000
#define PLAT_QEMU_FIP_BASE QEMU_FLASH0_BASE
#define PLAT_QEMU_FIP_MAX_SIZE QEMU_FLASH0_SIZE
#define DEVICE0_BASE 0x08000000
#define DEVICE0_SIZE 0x00021000
#define DEVICE1_BASE 0x09000000
#define DEVICE1_SIZE 0x00041000
/*
* GIC related constants
*/
#define GICD_BASE 0x8000000
#define GICC_BASE 0x8010000
#define GICR_BASE 0
#define QEMU_IRQ_SEC_SGI_0 8
#define QEMU_IRQ_SEC_SGI_1 9
#define QEMU_IRQ_SEC_SGI_2 10
#define QEMU_IRQ_SEC_SGI_3 11
#define QEMU_IRQ_SEC_SGI_4 12
#define QEMU_IRQ_SEC_SGI_5 13
#define QEMU_IRQ_SEC_SGI_6 14
#define QEMU_IRQ_SEC_SGI_7 15
/*
* DT related constants
*/
#define PLAT_QEMU_DT_BASE NS_DRAM0_BASE
#define PLAT_QEMU_DT_MAX_SIZE 0x100000
/*
* System counter
*/
#define SYS_COUNTER_FREQ_IN_TICKS ((1000 * 1000 * 1000) / 16)
#endif /* PLATFORM_DEF_H */