drivers/arm/pl011/aarch32/pl011_console.S - tf-a-mtk - Git at Google

 /*
  * Copyright (c) 2016-2019, ARM Limited and Contributors. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
 #include <arch.h>
 #include <asm_macros.S>
 #include <assert_macros.S>
 #include <console_macros.S>
 #include <drivers/arm/pl011.h>

 	/*
 	 * "core" functions are low-level implementations that don't require
 	 * writeable memory and are thus safe to call in BL1 crash context.
 	 */
 	.globl	console_pl011_core_init
 	.globl	console_pl011_core_putc
 	.globl	console_pl011_core_getc
 	.globl	console_pl011_core_flush

 	.globl	console_pl011_putc
 	.globl	console_pl011_getc
 	.globl	console_pl011_flush


 	/* -----------------------------------------------
 	 * int console_core_init(uintptr_t base_addr,
 	 * unsigned int uart_clk, unsigned int baud_rate)
 	 * Function to initialize the console without a
 	 * C Runtime to print debug information. This
 	 * function will be accessed by console_init and
 	 * crash reporting.
 	 * In: r0 - console base address
 	 *     r1 - Uart clock in Hz
 	 *     r2 - Baud rate
 	 * Out: return 1 on success else 0 on error
 	 * Clobber list : r1, r2, r3
 	 * -----------------------------------------------
 	 */
 func console_pl011_core_init
 	/* Check the input base address */
 	cmp	r0, #0
 	beq	core_init_fail
 #if !PL011_GENERIC_UART
 	/* Check baud rate and uart clock for sanity */
 	cmp	r1, #0
 	beq	core_init_fail
 	cmp	r2, #0
 	beq	core_init_fail
 	/* Disable the UART before initialization */
 	ldr	r3, [r0, #UARTCR]
 	bic	r3, r3, #PL011_UARTCR_UARTEN
 	str	r3, [r0, #UARTCR]
 	/* Program the baudrate */
 	/* Divisor =  (Uart clock * 4) / baudrate */
 	lsl	r1, r1, #2
 #if (ARM_ARCH_MAJOR == 7) && !defined(ARMV7_SUPPORTS_VIRTUALIZATION)
 	push	{r0,r3}
 	softudiv	r0,r1,r2,r3
 	mov	r2, r0
 	pop	{r0,r3}
 #else
 	udiv	r2, r1, r2
 #endif
 	/* IBRD = Divisor >> 6 */
 	lsr	r1, r2, #6
 	/* Write the IBRD */
 	str	r1, [r0, #UARTIBRD]
 	/* FBRD = Divisor & 0x3F */
 	and	r1, r2, #0x3f
 	/* Write the FBRD */
 	str	r1, [r0, #UARTFBRD]
 	mov	r1, #PL011_LINE_CONTROL
 	str	r1, [r0, #UARTLCR_H]
 	/* Clear any pending errors */
 	mov	r1, #0
 	str	r1, [r0, #UARTECR]
 	/* Enable tx, rx, and uart overall */
 	ldr	r1, =(PL011_UARTCR_RXE | PL011_UARTCR_TXE | PL011_UARTCR_UARTEN)
 	str	r1, [r0, #UARTCR]
 #endif
 	mov	r0, #1
 	bx	lr
 core_init_fail:
 	mov	r0, #0
 	bx	lr
 endfunc console_pl011_core_init

 	.globl console_pl011_register

 	/* -------------------------------------------------------
 	 * int console_pl011_register(uintptr_t baseaddr,
 	 *     uint32_t clock, uint32_t baud,
 	 *     console_pl011_t *console);
 	 * Function to initialize and register a new PL011
 	 * console. Storage passed in for the console struct
 	 * *must* be persistent (i.e. not from the stack).
 	 * In: r0 - UART register base address
 	 *     r1 - UART clock in Hz
 	 *     r2 - Baud rate
 	 *     r3 - pointer to empty console_pl011_t struct
 	 * Out: return 1 on success, 0 on error
 	 * Clobber list : r0, r1, r2
 	 * -------------------------------------------------------
 	 */
 func console_pl011_register
 	push	{r4, lr}
 	mov	r4, r3
 	cmp	r4, #0
 	beq	register_fail
 	str	r0, [r4, #CONSOLE_T_PL011_BASE]

 	bl console_pl011_core_init
 	cmp	r0, #0
 	beq	register_fail

 	mov	r0, r4
 	pop	{r4, lr}
 	finish_console_register pl011 putc=1, getc=1, flush=1

 register_fail:
 	pop	{r4, pc}
 endfunc console_pl011_register

 	/* --------------------------------------------------------
 	 * int console_core_putc(int c, uintptr_t base_addr)
 	 * Function to output a character over the console. It
 	 * returns the character printed on success or -1 on error.
 	 * In : r0 - character to be printed
 	 *      r1 - console base address
 	 * Out : return -1 on error else return character.
 	 * Clobber list : r2
 	 * --------------------------------------------------------
 	 */
 func console_pl011_core_putc
 	/* Check the input parameter */
 	cmp	r1, #0
 	beq	putc_error
 	/* Prepend '\r' to '\n' */
 	cmp	r0, #0xA
 	bne	2f
 1:
 	/* Check if the transmit FIFO is full */
 	ldr	r2, [r1, #UARTFR]
 	tst	r2, #PL011_UARTFR_TXFF
 	bne	1b
 	mov	r2, #0xD
 	str	r2, [r1, #UARTDR]
 2:
 	/* Check if the transmit FIFO is full */
 	ldr	r2, [r1, #UARTFR]
 	tst	r2, #PL011_UARTFR_TXFF
 	bne	2b
 	str	r0, [r1, #UARTDR]
 	bx	lr
 putc_error:
 	mov	r0, #-1
 	bx	lr
 endfunc console_pl011_core_putc

 	/* --------------------------------------------------------
 	 * int console_pl011_putc(int c, console_pl011_t *console)
 	 * Function to output a character over the console. It
 	 * returns the character printed on success or -1 on error.
 	 * In: r0 - character to be printed
 	 *     r1 - pointer to console_t structure
 	 * Out : return -1 on error else return character.
 	 * Clobber list: r2
 	 * -------------------------------------------------------
 	 */
 func console_pl011_putc
 #if ENABLE_ASSERTIONS
 	cmp	r1, #0
 	ASM_ASSERT(ne)
 #endif /* ENABLE_ASSERTIONS */
 	ldr	r1, [r1, #CONSOLE_T_PL011_BASE]
 	b	console_pl011_core_putc
 endfunc console_pl011_putc

 	/* ---------------------------------------------
 	 * int console_core_getc(uintptr_t base_addr)
 	 * Function to get a character from the console.
 	 * It returns the character grabbed on success
 	 * or -1 on error.
 	 * In : r0 - console base address
 	 * Clobber list : r0, r1
 	 * ---------------------------------------------
 	 */
 func console_pl011_core_getc
 	cmp	r0, #0
 	beq	getc_error
 1:
 	/* Check if the receive FIFO is empty */
 	ldr	r1, [r0, #UARTFR]
 	tst	r1, #PL011_UARTFR_RXFE
 	bne	1b
 	ldr	r1, [r0, #UARTDR]
 	mov	r0, r1
 	bx	lr
 getc_error:
 	mov	r0, #-1
 	bx	lr
 endfunc console_pl011_core_getc

 	/* ------------------------------------------------
 	 * int console_pl011_getc(console_pl011_t *console)
 	 * Function to get a character from the console.
 	 * It returns the character grabbed on success
 	 * or -1 if no character is available.
 	 * In : r0 - pointer to console_t structure
 	 * Out: r0 - character if available, else -1
 	 * Clobber list: r0, r1
 	 * ------------------------------------------------
 	 */
 func console_pl011_getc
 #if ENABLE_ASSERTIONS
 	cmp	r0, #0
 	ASM_ASSERT(ne)
 #endif /* ENABLE_ASSERTIONS */
 	ldr	r0, [r0, #CONSOLE_T_PL011_BASE]
 	b	console_pl011_core_getc
 endfunc console_pl011_getc

 	/* ---------------------------------------------
 	 * int console_core_flush(uintptr_t base_addr)
 	 * Function to force a write of all buffered
 	 * data that hasn't been output.
 	 * In : r0 - console base address
 	 * Out : return -1 on error else return 0.
 	 * Clobber list : r0, r1
 	 * ---------------------------------------------
 	 */
 func console_pl011_core_flush
 	cmp	r0, #0
 	beq	flush_error

 1:
 	/* Loop while the transmit FIFO is busy */
 	ldr	r1, [r0, #UARTFR]
 	tst	r1, #PL011_UARTFR_BUSY
 	bne	1b

 	mov	r0, #0
 	bx	lr
 flush_error:
 	mov	r0, #-1
 	bx	lr
 endfunc console_pl011_core_flush

 	/* ---------------------------------------------
 	 * int console_pl011_flush(console_pl011_t *console)
 	 * Function to force a write of all buffered
 	 * data that hasn't been output.
 	 * In : r0 - pointer to console_t structure
 	 * Out : return -1 on error else return 0.
 	 * Clobber list: r0, r1
 	 * ---------------------------------------------
 	 */
 func console_pl011_flush
 #if ENABLE_ASSERTIONS
 	cmp	r0, #0
 	ASM_ASSERT(ne)
 #endif /* ENABLE_ASSERTIONS */
 	ldr	r0, [r0, #CONSOLE_T_PL011_BASE]
 	b	console_pl011_core_flush
 endfunc console_pl011_flush
	/*
	* Copyright (c) 2016-2019, ARM Limited and Contributors. All rights reserved.
	*
	* SPDX-License-Identifier: BSD-3-Clause
	*/
	#include <arch.h>
	#include <asm_macros.S>
	#include <assert_macros.S>
	#include <console_macros.S>
	#include <drivers/arm/pl011.h>

	/*
	* "core" functions are low-level implementations that don't require
	* writeable memory and are thus safe to call in BL1 crash context.
	*/
	.globl console_pl011_core_init
	.globl console_pl011_core_putc
	.globl console_pl011_core_getc
	.globl console_pl011_core_flush

	.globl console_pl011_putc
	.globl console_pl011_getc
	.globl console_pl011_flush


	/* -----------------------------------------------
	* int console_core_init(uintptr_t base_addr,
	* unsigned int uart_clk, unsigned int baud_rate)
	* Function to initialize the console without a
	* C Runtime to print debug information. This
	* function will be accessed by console_init and
	* crash reporting.
	* In: r0 - console base address
	* r1 - Uart clock in Hz
	* r2 - Baud rate
	* Out: return 1 on success else 0 on error
	* Clobber list : r1, r2, r3
	* -----------------------------------------------
	*/
	func console_pl011_core_init
	/* Check the input base address */
	cmp r0, #0
	beq core_init_fail
	#if !PL011_GENERIC_UART
	/* Check baud rate and uart clock for sanity */
	cmp r1, #0
	beq core_init_fail
	cmp r2, #0
	beq core_init_fail
	/* Disable the UART before initialization */
	ldr r3, [r0, #UARTCR]
	bic r3, r3, #PL011_UARTCR_UARTEN
	str r3, [r0, #UARTCR]
	/* Program the baudrate */
	/* Divisor = (Uart clock * 4) / baudrate */
	lsl r1, r1, #2
	#if (ARM_ARCH_MAJOR == 7) && !defined(ARMV7_SUPPORTS_VIRTUALIZATION)
	push {r0,r3}
	softudiv r0,r1,r2,r3
	mov r2, r0
	pop {r0,r3}
	#else
	udiv r2, r1, r2
	#endif
	/* IBRD = Divisor >> 6 */
	lsr r1, r2, #6
	/* Write the IBRD */
	str r1, [r0, #UARTIBRD]
	/* FBRD = Divisor & 0x3F */
	and r1, r2, #0x3f
	/* Write the FBRD */
	str r1, [r0, #UARTFBRD]
	mov r1, #PL011_LINE_CONTROL
	str r1, [r0, #UARTLCR_H]
	/* Clear any pending errors */
	mov r1, #0
	str r1, [r0, #UARTECR]
	/* Enable tx, rx, and uart overall */
	ldr r1, =(PL011_UARTCR_RXE \| PL011_UARTCR_TXE \| PL011_UARTCR_UARTEN)
	str r1, [r0, #UARTCR]
	#endif
	mov r0, #1
	bx lr
	core_init_fail:
	mov r0, #0
	bx lr
	endfunc console_pl011_core_init

	.globl console_pl011_register

	/* -------------------------------------------------------
	* int console_pl011_register(uintptr_t baseaddr,
	* uint32_t clock, uint32_t baud,
	* console_pl011_t *console);
	* Function to initialize and register a new PL011
	* console. Storage passed in for the console struct
	* must be persistent (i.e. not from the stack).
	* In: r0 - UART register base address
	* r1 - UART clock in Hz
	* r2 - Baud rate
	* r3 - pointer to empty console_pl011_t struct
	* Out: return 1 on success, 0 on error
	* Clobber list : r0, r1, r2
	* -------------------------------------------------------
	*/
	func console_pl011_register
	push {r4, lr}
	mov r4, r3
	cmp r4, #0
	beq register_fail
	str r0, [r4, #CONSOLE_T_PL011_BASE]

	bl console_pl011_core_init
	cmp r0, #0
	beq register_fail

	mov r0, r4
	pop {r4, lr}
	finish_console_register pl011 putc=1, getc=1, flush=1

	register_fail:
	pop {r4, pc}
	endfunc console_pl011_register

	/* --------------------------------------------------------
	* int console_core_putc(int c, uintptr_t base_addr)
	* Function to output a character over the console. It
	* returns the character printed on success or -1 on error.
	* In : r0 - character to be printed
	* r1 - console base address
	* Out : return -1 on error else return character.
	* Clobber list : r2
	* --------------------------------------------------------
	*/
	func console_pl011_core_putc
	/* Check the input parameter */
	cmp r1, #0
	beq putc_error
	/* Prepend '\r' to '\n' */
	cmp r0, #0xA
	bne 2f
	1:
	/* Check if the transmit FIFO is full */
	ldr r2, [r1, #UARTFR]
	tst r2, #PL011_UARTFR_TXFF
	bne 1b
	mov r2, #0xD
	str r2, [r1, #UARTDR]
	2:
	/* Check if the transmit FIFO is full */
	ldr r2, [r1, #UARTFR]
	tst r2, #PL011_UARTFR_TXFF
	bne 2b
	str r0, [r1, #UARTDR]
	bx lr
	putc_error:
	mov r0, #-1
	bx lr
	endfunc console_pl011_core_putc

	/* --------------------------------------------------------
	* int console_pl011_putc(int c, console_pl011_t *console)
	* Function to output a character over the console. It
	* returns the character printed on success or -1 on error.
	* In: r0 - character to be printed
	* r1 - pointer to console_t structure
	* Out : return -1 on error else return character.
	* Clobber list: r2
	* -------------------------------------------------------
	*/
	func console_pl011_putc
	#if ENABLE_ASSERTIONS
	cmp r1, #0
	ASM_ASSERT(ne)
	#endif /* ENABLE_ASSERTIONS */
	ldr r1, [r1, #CONSOLE_T_PL011_BASE]
	b console_pl011_core_putc
	endfunc console_pl011_putc

	/* ---------------------------------------------
	* int console_core_getc(uintptr_t base_addr)
	* Function to get a character from the console.
	* It returns the character grabbed on success
	* or -1 on error.
	* In : r0 - console base address
	* Clobber list : r0, r1
	* ---------------------------------------------
	*/
	func console_pl011_core_getc
	cmp r0, #0
	beq getc_error
	1:
	/* Check if the receive FIFO is empty */
	ldr r1, [r0, #UARTFR]
	tst r1, #PL011_UARTFR_RXFE
	bne 1b
	ldr r1, [r0, #UARTDR]
	mov r0, r1
	bx lr
	getc_error:
	mov r0, #-1
	bx lr
	endfunc console_pl011_core_getc

	/* ------------------------------------------------
	* int console_pl011_getc(console_pl011_t *console)
	* Function to get a character from the console.
	* It returns the character grabbed on success
	* or -1 if no character is available.
	* In : r0 - pointer to console_t structure
	* Out: r0 - character if available, else -1
	* Clobber list: r0, r1
	* ------------------------------------------------
	*/
	func console_pl011_getc
	#if ENABLE_ASSERTIONS
	cmp r0, #0
	ASM_ASSERT(ne)
	#endif /* ENABLE_ASSERTIONS */
	ldr r0, [r0, #CONSOLE_T_PL011_BASE]
	b console_pl011_core_getc
	endfunc console_pl011_getc

	/* ---------------------------------------------
	* int console_core_flush(uintptr_t base_addr)
	* Function to force a write of all buffered
	* data that hasn't been output.
	* In : r0 - console base address
	* Out : return -1 on error else return 0.
	* Clobber list : r0, r1
	* ---------------------------------------------
	*/
	func console_pl011_core_flush
	cmp r0, #0
	beq flush_error

	1:
	/* Loop while the transmit FIFO is busy */
	ldr r1, [r0, #UARTFR]
	tst r1, #PL011_UARTFR_BUSY
	bne 1b

	mov r0, #0
	bx lr
	flush_error:
	mov r0, #-1
	bx lr
	endfunc console_pl011_core_flush

	/* ---------------------------------------------
	* int console_pl011_flush(console_pl011_t *console)
	* Function to force a write of all buffered
	* data that hasn't been output.
	* In : r0 - pointer to console_t structure
	* Out : return -1 on error else return 0.
	* Clobber list: r0, r1
	* ---------------------------------------------
	*/
	func console_pl011_flush
	#if ENABLE_ASSERTIONS
	cmp r0, #0
	ASM_ASSERT(ne)
	#endif /* ENABLE_ASSERTIONS */
	ldr r0, [r0, #CONSOLE_T_PL011_BASE]
	b console_pl011_core_flush
	endfunc console_pl011_flush