blob: 6ec638a568795e1b21a6414e0203466e7d795bec [file] [log] [blame]
/* GStreamer unit tests for multiqueue
*
* Copyright (C) 2007 Tim-Philipp Müller <tim centricular net>
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Library General Public
* License as published by the Free Software Foundation; either
* version 2 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Library General Public License for more details.
*
* You should have received a copy of the GNU Library General Public
* License along with this library; if not, write to the
* Free Software Foundation, Inc., 51 Franklin St, Fifth Floor,
* Boston, MA 02110-1301, USA.
*/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#include <gst/check/gstcheck.h>
static GMutex _check_lock;
static GstElement *
setup_multiqueue (GstElement * pipe, GstElement * inputs[],
GstElement * outputs[], guint num)
{
GstElement *mq;
guint i;
mq = gst_element_factory_make ("multiqueue", NULL);
fail_unless (mq != NULL, "failed to create 'multiqueue' element");
gst_bin_add (GST_BIN (pipe), mq);
for (i = 0; i < num; ++i) {
GstPad *sinkpad = NULL;
GstPad *srcpad = NULL;
/* create multiqueue sink (and source) pad */
sinkpad = gst_element_get_request_pad (mq, "sink_%u");
fail_unless (sinkpad != NULL,
"failed to create multiqueue request pad #%u", i);
/* link input element N to the N-th multiqueue sink pad we just created */
if (inputs != NULL && inputs[i] != NULL) {
gst_bin_add (GST_BIN (pipe), inputs[i]);
srcpad = gst_element_get_static_pad (inputs[i], "src");
fail_unless (srcpad != NULL, "failed to find src pad for input #%u", i);
fail_unless_equals_int (GST_PAD_LINK_OK, gst_pad_link (srcpad, sinkpad));
gst_object_unref (srcpad);
srcpad = NULL;
}
gst_object_unref (sinkpad);
sinkpad = NULL;
/* link output element N to the N-th multiqueue src pad */
if (outputs != NULL && outputs[i] != NULL) {
gchar padname[10];
/* only the sink pads are by request, the source pads are sometimes pads,
* so this should return NULL */
srcpad = gst_element_get_request_pad (mq, "src_%u");
fail_unless (srcpad == NULL);
g_snprintf (padname, sizeof (padname), "src_%u", i);
srcpad = gst_element_get_static_pad (mq, padname);
fail_unless (srcpad != NULL, "failed to get multiqueue src pad #%u", i);
fail_unless (GST_PAD_IS_SRC (srcpad),
"%s:%s is not a source pad?!", GST_DEBUG_PAD_NAME (srcpad));
gst_bin_add (GST_BIN (pipe), outputs[i]);
sinkpad = gst_element_get_static_pad (outputs[i], "sink");
fail_unless (sinkpad != NULL, "failed to find sink pad of output #%u", i);
fail_unless (GST_PAD_IS_SINK (sinkpad));
fail_unless_equals_int (GST_PAD_LINK_OK, gst_pad_link (srcpad, sinkpad));
gst_object_unref (srcpad);
gst_object_unref (sinkpad);
}
}
return mq;
}
GST_START_TEST (test_simple_pipeline)
{
GstElement *pipe;
GstElement *inputs[1];
GstElement *outputs[1];
GstMessage *msg;
pipe = gst_pipeline_new ("pipeline");
inputs[0] = gst_element_factory_make ("fakesrc", NULL);
fail_unless (inputs[0] != NULL, "failed to create 'fakesrc' element");
g_object_set (inputs[0], "num-buffers", 256, NULL);
outputs[0] = gst_element_factory_make ("fakesink", NULL);
fail_unless (outputs[0] != NULL, "failed to create 'fakesink' element");
setup_multiqueue (pipe, inputs, outputs, 1);
gst_element_set_state (pipe, GST_STATE_PLAYING);
msg = gst_bus_poll (GST_ELEMENT_BUS (pipe),
GST_MESSAGE_EOS | GST_MESSAGE_ERROR, -1);
fail_if (GST_MESSAGE_TYPE (msg) == GST_MESSAGE_ERROR,
"Expected EOS message, got ERROR message");
gst_message_unref (msg);
GST_LOG ("Got EOS, cleaning up");
gst_element_set_state (pipe, GST_STATE_NULL);
gst_object_unref (pipe);
}
GST_END_TEST;
GST_START_TEST (test_simple_shutdown_while_running)
{
GstElement *pipe;
GstElement *inputs[1];
GstElement *outputs[1];
GstMessage *msg;
pipe = gst_pipeline_new ("pipeline");
inputs[0] = gst_element_factory_make ("fakesrc", NULL);
fail_unless (inputs[0] != NULL, "failed to create 'fakesrc' element");
outputs[0] = gst_element_factory_make ("fakesink", NULL);
fail_unless (outputs[0] != NULL, "failed to create 'fakesink' element");
setup_multiqueue (pipe, inputs, outputs, 1);
gst_element_set_state (pipe, GST_STATE_PAUSED);
/* wait until pipeline is up and running */
msg = gst_bus_poll (GST_ELEMENT_BUS (pipe),
GST_MESSAGE_ERROR | GST_MESSAGE_ASYNC_DONE, -1);
fail_if (GST_MESSAGE_TYPE (msg) == GST_MESSAGE_ERROR, "Got ERROR message");
gst_message_unref (msg);
GST_LOG ("pipeline is running now");
gst_element_set_state (pipe, GST_STATE_PAUSED);
/* wait a bit to accumulate some buffers in the queue (while it's blocking
* in the sink) */
msg =
gst_bus_poll (GST_ELEMENT_BUS (pipe), GST_MESSAGE_ERROR, GST_SECOND / 4);
if (msg)
g_error ("Got ERROR message");
/* now shut down only the sink, so the queue gets a wrong-state flow return */
gst_element_set_state (outputs[0], GST_STATE_NULL);
msg =
gst_bus_poll (GST_ELEMENT_BUS (pipe), GST_MESSAGE_ERROR, GST_SECOND / 2);
if (msg)
g_error ("Got ERROR message");
GST_LOG ("Cleaning up");
gst_element_set_state (pipe, GST_STATE_NULL);
gst_object_unref (pipe);
}
GST_END_TEST;
GST_START_TEST (test_simple_create_destroy)
{
GstElement *mq;
mq = gst_element_factory_make ("multiqueue", NULL);
gst_object_unref (mq);
}
GST_END_TEST;
GST_START_TEST (test_request_pads)
{
GstElement *mq;
GstPad *sink1, *sink2;
mq = gst_element_factory_make ("multiqueue", NULL);
sink1 = gst_element_get_request_pad (mq, "foo_%u");
fail_unless (sink1 == NULL,
"Expected NULL pad, as there is no request pad template for 'foo_%%u'");
sink1 = gst_element_get_request_pad (mq, "src_%u");
fail_unless (sink1 == NULL,
"Expected NULL pad, as there is no request pad template for 'src_%%u'");
sink1 = gst_element_get_request_pad (mq, "sink_%u");
fail_unless (sink1 != NULL);
fail_unless (GST_IS_PAD (sink1));
fail_unless (GST_PAD_IS_SINK (sink1));
GST_LOG ("Got pad %s:%s", GST_DEBUG_PAD_NAME (sink1));
sink2 = gst_element_get_request_pad (mq, "sink_%u");
fail_unless (sink2 != NULL);
fail_unless (GST_IS_PAD (sink2));
fail_unless (GST_PAD_IS_SINK (sink2));
GST_LOG ("Got pad %s:%s", GST_DEBUG_PAD_NAME (sink2));
fail_unless (sink1 != sink2);
GST_LOG ("Cleaning up");
gst_object_unref (sink1);
gst_object_unref (sink2);
gst_object_unref (mq);
}
GST_END_TEST;
static GstPad *
mq_sinkpad_to_srcpad (GstElement * mq, GstPad * sink)
{
GstPad *srcpad = NULL;
gchar *mq_sinkpad_name;
gchar *mq_srcpad_name;
mq_sinkpad_name = gst_pad_get_name (sink);
fail_unless (g_str_has_prefix (mq_sinkpad_name, "sink"));
mq_srcpad_name = g_strdup_printf ("src_%s", mq_sinkpad_name + 5);
srcpad = gst_element_get_static_pad (mq, mq_srcpad_name);
fail_unless (srcpad != NULL);
g_free (mq_sinkpad_name);
g_free (mq_srcpad_name);
return srcpad;
}
GST_START_TEST (test_request_pads_named)
{
GstElement *mq;
GstPad *sink1, *sink2, *sink3, *sink4;
mq = gst_element_factory_make ("multiqueue", NULL);
sink1 = gst_element_get_request_pad (mq, "sink_1");
fail_unless (sink1 != NULL);
fail_unless (GST_IS_PAD (sink1));
fail_unless (GST_PAD_IS_SINK (sink1));
fail_unless_equals_string (GST_PAD_NAME (sink1), "sink_1");
GST_LOG ("Got pad %s:%s", GST_DEBUG_PAD_NAME (sink1));
sink3 = gst_element_get_request_pad (mq, "sink_3");
fail_unless (sink3 != NULL);
fail_unless (GST_IS_PAD (sink3));
fail_unless (GST_PAD_IS_SINK (sink3));
fail_unless_equals_string (GST_PAD_NAME (sink3), "sink_3");
GST_LOG ("Got pad %s:%s", GST_DEBUG_PAD_NAME (sink3));
sink2 = gst_element_get_request_pad (mq, "sink_2");
fail_unless (sink2 != NULL);
fail_unless (GST_IS_PAD (sink2));
fail_unless (GST_PAD_IS_SINK (sink2));
fail_unless_equals_string (GST_PAD_NAME (sink2), "sink_2");
GST_LOG ("Got pad %s:%s", GST_DEBUG_PAD_NAME (sink2));
/* This gets us the first unused id, sink0 */
sink4 = gst_element_get_request_pad (mq, "sink_%u");
fail_unless (sink4 != NULL);
fail_unless (GST_IS_PAD (sink4));
fail_unless (GST_PAD_IS_SINK (sink4));
fail_unless_equals_string (GST_PAD_NAME (sink4), "sink_0");
GST_LOG ("Got pad %s:%s", GST_DEBUG_PAD_NAME (sink4));
GST_LOG ("Cleaning up");
gst_object_unref (sink1);
gst_object_unref (sink2);
gst_object_unref (sink3);
gst_object_unref (sink4);
gst_object_unref (mq);
}
GST_END_TEST;
static gboolean
mq_dummypad_query (GstPad * sinkpad, GstObject * parent, GstQuery * query)
{
gboolean res = TRUE;
switch (GST_QUERY_TYPE (query)) {
case GST_QUERY_CAPS:
{
GstCaps *filter, *caps;
gst_query_parse_caps (query, &filter);
caps = (filter ? gst_caps_ref (filter) : gst_caps_new_any ());
gst_query_set_caps_result (query, caps);
gst_caps_unref (caps);
break;
}
default:
res = gst_pad_query_default (sinkpad, parent, query);
break;
}
return res;
}
struct PadData
{
GstPad *input_pad;
GstPad *out_pad;
guint8 pad_num;
guint32 *max_linked_id_ptr;
guint32 *eos_count_ptr;
gboolean is_linked;
gboolean first_buf;
gint n_linked;
GMutex *mutex;
GCond *cond;
/* used by initial_events_nodelay */
gint event_count;
};
static GstFlowReturn
mq_dummypad_chain (GstPad * sinkpad, GstObject * parent, GstBuffer * buf)
{
guint32 cur_id;
struct PadData *pad_data;
GstMapInfo info;
pad_data = gst_pad_get_element_private (sinkpad);
g_mutex_lock (&_check_lock);
fail_if (pad_data == NULL);
/* Read an ID from the first 4 bytes of the buffer data and check it's
* what we expect */
fail_unless (gst_buffer_map (buf, &info, GST_MAP_READ));
fail_unless (info.size >= 4);
g_mutex_unlock (&_check_lock);
cur_id = GST_READ_UINT32_BE (info.data);
gst_buffer_unmap (buf, &info);
g_mutex_lock (pad_data->mutex);
/* For not-linked pads, ensure that we're not running ahead of the 'linked'
* pads. The first buffer is allowed to get ahead, because otherwise things can't
* always pre-roll correctly */
if (pad_data->max_linked_id_ptr) {
if (!pad_data->is_linked) {
/* If there are no linked pads, we can't track a max_id for them :) */
if (pad_data->n_linked > 0 && !pad_data->first_buf) {
g_mutex_lock (&_check_lock);
fail_unless (cur_id <= *(pad_data->max_linked_id_ptr) + 1,
"Got buffer %u on pad %u before buffer %u was seen on a "
"linked pad (max: %u)", cur_id, pad_data->pad_num, cur_id - 1,
*(pad_data->max_linked_id_ptr));
g_mutex_unlock (&_check_lock);
}
} else {
/* Update the max_id value */
if (cur_id > *(pad_data->max_linked_id_ptr))
*(pad_data->max_linked_id_ptr) = cur_id;
}
}
pad_data->first_buf = FALSE;
g_mutex_unlock (pad_data->mutex);
/* Unref the buffer */
gst_buffer_unref (buf);
/* Return OK or not-linked as indicated */
return pad_data->is_linked ? GST_FLOW_OK : GST_FLOW_NOT_LINKED;
}
static gboolean
mq_dummypad_event (GstPad * sinkpad, GstObject * parent, GstEvent * event)
{
struct PadData *pad_data;
pad_data = gst_pad_get_element_private (sinkpad);
g_mutex_lock (&_check_lock);
fail_if (pad_data == NULL);
g_mutex_unlock (&_check_lock);
if (GST_EVENT_TYPE (event) == GST_EVENT_EOS) {
g_mutex_lock (pad_data->mutex);
/* Accumulate that we've seen the EOS and signal the main thread */
if (pad_data->eos_count_ptr)
*(pad_data->eos_count_ptr) += 1;
GST_DEBUG ("EOS on pad %u", pad_data->pad_num);
g_cond_broadcast (pad_data->cond);
g_mutex_unlock (pad_data->mutex);
}
gst_event_unref (event);
return TRUE;
}
static void
construct_n_pads (GstElement * mq, struct PadData *pad_data, gint n_pads,
gint n_linked)
{
gint i;
GstSegment segment;
gst_segment_init (&segment, GST_FORMAT_BYTES);
/* Construct NPADS dummy output pads. The first 'n_linked' return FLOW_OK, the rest
* return NOT_LINKED. The not-linked ones check the expected ordering of
* output buffers */
for (i = 0; i < n_pads; i++) {
GstPad *mq_srcpad, *mq_sinkpad, *inpad, *outpad;
gchar *name;
name = g_strdup_printf ("dummysrc%d", i);
inpad = gst_pad_new (name, GST_PAD_SRC);
g_free (name);
gst_pad_set_query_function (inpad, mq_dummypad_query);
mq_sinkpad = gst_element_get_request_pad (mq, "sink_%u");
fail_unless (mq_sinkpad != NULL);
fail_unless (gst_pad_link (inpad, mq_sinkpad) == GST_PAD_LINK_OK);
gst_pad_set_active (inpad, TRUE);
gst_pad_push_event (inpad, gst_event_new_stream_start ("test"));
gst_pad_push_event (inpad, gst_event_new_segment (&segment));
mq_srcpad = mq_sinkpad_to_srcpad (mq, mq_sinkpad);
name = g_strdup_printf ("dummysink%d", i);
outpad = gst_pad_new (name, GST_PAD_SINK);
g_free (name);
gst_pad_set_chain_function (outpad, mq_dummypad_chain);
gst_pad_set_event_function (outpad, mq_dummypad_event);
gst_pad_set_query_function (outpad, mq_dummypad_query);
pad_data[i].pad_num = i;
pad_data[i].input_pad = inpad;
pad_data[i].out_pad = outpad;
pad_data[i].max_linked_id_ptr = NULL;
pad_data[i].eos_count_ptr = NULL;
pad_data[i].is_linked = (i < n_linked ? TRUE : FALSE);
pad_data[i].n_linked = n_linked;
pad_data[i].cond = NULL;
pad_data[i].mutex = NULL;
pad_data[i].first_buf = TRUE;
gst_pad_set_element_private (outpad, pad_data + i);
fail_unless (gst_pad_link (mq_srcpad, outpad) == GST_PAD_LINK_OK);
gst_pad_set_active (outpad, TRUE);
gst_object_unref (mq_sinkpad);
gst_object_unref (mq_srcpad);
}
}
static void
push_n_buffers (struct PadData *pad_data, gint num_buffers,
const guint8 * pad_pattern, guint pattern_size)
{
gint i;
for (i = 0; i < num_buffers; i++) {
guint8 cur_pad;
GstBuffer *buf;
GstFlowReturn ret;
GstMapInfo info;
cur_pad = pad_pattern[i % pattern_size];
buf = gst_buffer_new_and_alloc (4);
g_mutex_lock (&_check_lock);
fail_if (buf == NULL);
g_mutex_unlock (&_check_lock);
fail_unless (gst_buffer_map (buf, &info, GST_MAP_WRITE));
GST_WRITE_UINT32_BE (info.data, i + 1);
gst_buffer_unmap (buf, &info);
GST_BUFFER_TIMESTAMP (buf) = (i + 1) * GST_SECOND;
ret = gst_pad_push (pad_data[cur_pad].input_pad, buf);
g_mutex_lock (&_check_lock);
if (pad_data[cur_pad].is_linked) {
fail_unless (ret == GST_FLOW_OK,
"Push on pad %d returned %d when FLOW_OK was expected", cur_pad, ret);
} else {
/* Expect OK initially, then NOT_LINKED when the srcpad starts pushing */
fail_unless (ret == GST_FLOW_OK || ret == GST_FLOW_NOT_LINKED,
"Push on pad %d returned %d when FLOW_OK or NOT_LINKED was expected",
cur_pad, ret);
}
g_mutex_unlock (&_check_lock);
}
}
static void
run_output_order_test (gint n_linked)
{
/* This test creates a multiqueue with 2 linked output, and 3 outputs that
* return 'not-linked' when data is pushed, then verifies that all buffers
* are received on not-linked pads only after earlier buffers on the
* 'linked' pads are made */
GstElement *pipe;
GstElement *mq;
struct PadData pad_data[5];
guint32 max_linked_id;
guint32 eos_seen;
GMutex mutex;
GCond cond;
gint i;
const gint NPADS = 5;
const gint NBUFFERS = 1000;
g_mutex_init (&mutex);
g_cond_init (&cond);
pipe = gst_bin_new ("testbin");
mq = gst_element_factory_make ("multiqueue", NULL);
fail_unless (mq != NULL);
gst_bin_add (GST_BIN (pipe), mq);
/* No limits */
g_object_set (mq,
"max-size-bytes", (guint) 0,
"max-size-buffers", (guint) 0,
"max-size-time", (guint64) 0,
"extra-size-bytes", (guint) 0,
"extra-size-buffers", (guint) 0, "extra-size-time", (guint64) 0, NULL);
construct_n_pads (mq, pad_data, NPADS, n_linked);
for (i = 0; i < NPADS; i++) {
pad_data[i].max_linked_id_ptr = &max_linked_id;
/* Only look for EOS on the linked pads */
pad_data[i].eos_count_ptr = (i < n_linked) ? &eos_seen : NULL;
pad_data[i].cond = &cond;
pad_data[i].mutex = &mutex;
}
/* Run the test. Push 1000 buffers through the multiqueue in a pattern */
max_linked_id = 0;
eos_seen = 0;
gst_element_set_state (pipe, GST_STATE_PLAYING);
{
const guint8 pad_pattern[] =
{ 0, 0, 0, 0, 1, 1, 2, 1, 0, 2, 3, 2, 3, 1, 4 };
const guint n = sizeof (pad_pattern) / sizeof (guint8);
push_n_buffers (pad_data, NBUFFERS, pad_pattern, n);
}
for (i = 0; i < NPADS; i++) {
gst_pad_push_event (pad_data[i].input_pad, gst_event_new_eos ());
}
/* Wait while the buffers are processed */
g_mutex_lock (&mutex);
/* We wait until EOS has been pushed on all linked pads */
while (eos_seen < n_linked) {
g_cond_wait (&cond, &mutex);
}
g_mutex_unlock (&mutex);
/* Clean up */
for (i = 0; i < NPADS; i++) {
GstPad *mq_input = gst_pad_get_peer (pad_data[i].input_pad);
gst_pad_unlink (pad_data[i].input_pad, mq_input);
gst_element_release_request_pad (mq, mq_input);
gst_object_unref (mq_input);
gst_object_unref (pad_data[i].input_pad);
gst_object_unref (pad_data[i].out_pad);
}
gst_element_set_state (pipe, GST_STATE_NULL);
gst_object_unref (pipe);
g_cond_clear (&cond);
g_mutex_clear (&mutex);
}
GST_START_TEST (test_output_order)
{
run_output_order_test (2);
run_output_order_test (0);
}
GST_END_TEST;
GST_START_TEST (test_not_linked_eos)
{
/* This test creates a multiqueue with 1 linked output and 1 not-linked
* pad. It pushes a few buffers through each, then EOS on the linked
* pad and waits until that arrives. After that, it pushes some more
* buffers on the not-linked pad and then EOS and checks that those
* are all output */
GstElement *pipe;
GstElement *mq;
struct PadData pad_data[2];
guint32 eos_seen;
GMutex mutex;
GCond cond;
gint i;
const gint NPADS = 2;
const gint NBUFFERS = 20;
GstSegment segment;
gst_segment_init (&segment, GST_FORMAT_BYTES);
g_mutex_init (&mutex);
g_cond_init (&cond);
pipe = gst_bin_new ("testbin");
mq = gst_element_factory_make ("multiqueue", NULL);
fail_unless (mq != NULL);
gst_bin_add (GST_BIN (pipe), mq);
/* No limits */
g_object_set (mq,
"max-size-bytes", (guint) 0,
"max-size-buffers", (guint) 0,
"max-size-time", (guint64) 0,
"extra-size-bytes", (guint) 0,
"extra-size-buffers", (guint) 0, "extra-size-time", (guint64) 0, NULL);
/* Construct NPADS dummy output pads. The first 1 returns FLOW_OK, the rest
* return NOT_LINKED. */
construct_n_pads (mq, pad_data, NPADS, 1);
for (i = 0; i < NPADS; i++) {
/* Only look for EOS on the linked pads */
pad_data[i].eos_count_ptr = &eos_seen;
pad_data[i].cond = &cond;
pad_data[i].mutex = &mutex;
}
/* Run the test. Push 20 buffers through the multiqueue in a pattern */
eos_seen = 0;
gst_element_set_state (pipe, GST_STATE_PLAYING);
{
const guint8 pad_pattern[] = { 0, 1 };
const guint n = sizeof (pad_pattern) / sizeof (guint8);
push_n_buffers (pad_data, NBUFFERS, pad_pattern, n);
}
/* Make the linked pad go EOS */
gst_pad_push_event (pad_data[0].input_pad, gst_event_new_eos ());
g_mutex_lock (&mutex);
/* Wait until EOS has been seen on the linked pad */
while (eos_seen == 0)
g_cond_wait (&cond, &mutex);
g_mutex_unlock (&mutex);
/* Now push some more buffers to the not-linked pad */
{
const guint8 pad_pattern[] = { 1, 1 };
const guint n = sizeof (pad_pattern) / sizeof (guint8);
push_n_buffers (pad_data, NBUFFERS, pad_pattern, n);
}
/* And EOS on the not-linked pad */
gst_pad_push_event (pad_data[1].input_pad, gst_event_new_eos ());
g_mutex_lock (&mutex);
while (eos_seen < NPADS)
g_cond_wait (&cond, &mutex);
g_mutex_unlock (&mutex);
/* Clean up */
for (i = 0; i < NPADS; i++) {
GstPad *mq_input = gst_pad_get_peer (pad_data[i].input_pad);
gst_pad_unlink (pad_data[i].input_pad, mq_input);
gst_element_release_request_pad (mq, mq_input);
gst_object_unref (mq_input);
gst_object_unref (pad_data[i].input_pad);
gst_object_unref (pad_data[i].out_pad);
}
gst_element_set_state (pipe, GST_STATE_NULL);
gst_object_unref (pipe);
g_cond_clear (&cond);
g_mutex_clear (&mutex);
}
GST_END_TEST;
GST_START_TEST (test_sparse_stream)
{
/* This test creates a multiqueue with 2 streams. One receives
* a constant flow of buffers, the other only gets one buffer, and then
* new-segment events, and returns not-linked. The multiqueue should not fill.
*/
GstElement *pipe;
GstElement *mq;
GstPad *inputpads[2];
GstPad *sinkpads[2];
GstEvent *event;
struct PadData pad_data[2];
guint32 eos_seen, max_linked_id;
GMutex mutex;
GCond cond;
gint i;
const gint NBUFFERS = 100;
GstSegment segment;
g_mutex_init (&mutex);
g_cond_init (&cond);
pipe = gst_pipeline_new ("testbin");
mq = gst_element_factory_make ("multiqueue", NULL);
fail_unless (mq != NULL);
gst_bin_add (GST_BIN (pipe), mq);
/* 1 second limit */
g_object_set (mq,
"max-size-bytes", (guint) 0,
"max-size-buffers", (guint) 0,
"max-size-time", (guint64) GST_SECOND,
"extra-size-bytes", (guint) 0,
"extra-size-buffers", (guint) 0, "extra-size-time", (guint64) 0, NULL);
gst_segment_init (&segment, GST_FORMAT_TIME);
/* Construct 2 dummy output pads. */
for (i = 0; i < 2; i++) {
GstPad *mq_srcpad, *mq_sinkpad;
gchar *name;
name = g_strdup_printf ("dummysrc%d", i);
inputpads[i] = gst_pad_new (name, GST_PAD_SRC);
g_free (name);
gst_pad_set_query_function (inputpads[i], mq_dummypad_query);
mq_sinkpad = gst_element_get_request_pad (mq, "sink_%u");
fail_unless (mq_sinkpad != NULL);
fail_unless (gst_pad_link (inputpads[i], mq_sinkpad) == GST_PAD_LINK_OK);
gst_pad_set_active (inputpads[i], TRUE);
gst_pad_push_event (inputpads[i], gst_event_new_stream_start ("test"));
gst_pad_push_event (inputpads[i], gst_event_new_segment (&segment));
mq_srcpad = mq_sinkpad_to_srcpad (mq, mq_sinkpad);
name = g_strdup_printf ("dummysink%d", i);
sinkpads[i] = gst_pad_new (name, GST_PAD_SINK);
g_free (name);
gst_pad_set_chain_function (sinkpads[i], mq_dummypad_chain);
gst_pad_set_event_function (sinkpads[i], mq_dummypad_event);
gst_pad_set_query_function (sinkpads[i], mq_dummypad_query);
pad_data[i].pad_num = i;
pad_data[i].max_linked_id_ptr = &max_linked_id;
if (i == 0)
pad_data[i].eos_count_ptr = &eos_seen;
else
pad_data[i].eos_count_ptr = NULL;
pad_data[i].is_linked = (i == 0) ? TRUE : FALSE;
pad_data[i].n_linked = 1;
pad_data[i].cond = &cond;
pad_data[i].mutex = &mutex;
pad_data[i].first_buf = TRUE;
gst_pad_set_element_private (sinkpads[i], pad_data + i);
fail_unless (gst_pad_link (mq_srcpad, sinkpads[i]) == GST_PAD_LINK_OK);
gst_pad_set_active (sinkpads[i], TRUE);
gst_object_unref (mq_sinkpad);
gst_object_unref (mq_srcpad);
}
/* Run the test. Push 100 buffers through the multiqueue */
max_linked_id = 0;
eos_seen = 0;
gst_element_set_state (pipe, GST_STATE_PLAYING);
for (i = 0; i < NBUFFERS; i++) {
GstBuffer *buf;
GstFlowReturn ret;
GstClockTime ts;
GstMapInfo info;
ts = gst_util_uint64_scale_int (GST_SECOND, i, 10);
buf = gst_buffer_new_and_alloc (4);
g_mutex_lock (&_check_lock);
fail_if (buf == NULL);
g_mutex_unlock (&_check_lock);
fail_unless (gst_buffer_map (buf, &info, GST_MAP_WRITE));
GST_WRITE_UINT32_BE (info.data, i + 1);
gst_buffer_unmap (buf, &info);
GST_BUFFER_TIMESTAMP (buf) = gst_util_uint64_scale_int (GST_SECOND, i, 10);
/* If i == 0, also push the buffer to the 2nd pad */
if (i == 0)
ret = gst_pad_push (inputpads[1], gst_buffer_ref (buf));
ret = gst_pad_push (inputpads[0], buf);
g_mutex_lock (&_check_lock);
fail_unless (ret == GST_FLOW_OK,
"Push on pad %d returned %d when FLOW_OK was expected", 0, ret);
g_mutex_unlock (&_check_lock);
/* Push a new segment update on the 2nd pad */
gst_segment_init (&segment, GST_FORMAT_TIME);
segment.start = ts;
segment.time = ts;
event = gst_event_new_segment (&segment);
gst_pad_push_event (inputpads[1], event);
}
event = gst_event_new_eos ();
gst_pad_push_event (inputpads[0], gst_event_ref (event));
gst_pad_push_event (inputpads[1], event);
/* Wait while the buffers are processed */
g_mutex_lock (&mutex);
/* We wait until EOS has been pushed on pad 1 */
while (eos_seen < 1) {
g_cond_wait (&cond, &mutex);
}
g_mutex_unlock (&mutex);
/* Clean up */
for (i = 0; i < 2; i++) {
GstPad *mq_input = gst_pad_get_peer (inputpads[i]);
gst_pad_unlink (inputpads[i], mq_input);
gst_element_release_request_pad (mq, mq_input);
gst_object_unref (mq_input);
gst_object_unref (inputpads[i]);
gst_object_unref (sinkpads[i]);
}
gst_element_set_state (pipe, GST_STATE_NULL);
gst_object_unref (pipe);
g_cond_clear (&cond);
g_mutex_clear (&mutex);
}
GST_END_TEST;
static gpointer
pad_push_datablock_thread (gpointer data)
{
GstPad *pad = data;
GstBuffer *buf;
buf = gst_buffer_new_allocate (NULL, 80 * 1000, NULL);
gst_pad_push (pad, buf);
return NULL;
}
static GstPadProbeReturn
block_probe (GstPad * pad, GstPadProbeInfo * info, gpointer user_data)
{
return GST_PAD_PROBE_OK;
}
static void
check_for_buffering_msg (GstElement * pipeline, gint expected_perc)
{
gint buf_perc;
GstMessage *msg;
GST_LOG ("waiting for %d%% buffering message", expected_perc);
msg = gst_bus_poll (GST_ELEMENT_BUS (pipeline),
GST_MESSAGE_BUFFERING | GST_MESSAGE_ERROR, -1);
fail_if (GST_MESSAGE_TYPE (msg) == GST_MESSAGE_ERROR,
"Expected BUFFERING message, got ERROR message");
gst_message_parse_buffering (msg, &buf_perc);
fail_unless (buf_perc == expected_perc,
"Got incorrect percentage: %d%% expected: %d%%", buf_perc, expected_perc);
gst_message_unref (msg);
}
GST_START_TEST (test_initial_fill_above_high_threshold)
{
/* This test checks what happens if the first buffer that enters
* the queue immediately fills it above the high-threshold. */
GstElement *pipe;
GstElement *mq, *fakesink;
GstPad *inputpad;
GstPad *mq_sinkpad;
GstPad *sinkpad;
GstSegment segment;
GThread *thread;
/* Setup test pipeline with one multiqueue and one fakesink */
pipe = gst_pipeline_new ("testbin");
mq = gst_element_factory_make ("multiqueue", NULL);
fail_unless (mq != NULL);
gst_bin_add (GST_BIN (pipe), mq);
fakesink = gst_element_factory_make ("fakesink", NULL);
fail_unless (fakesink != NULL);
gst_bin_add (GST_BIN (pipe), fakesink);
/* Block fakesink sinkpad flow to ensure the queue isn't emptied
* by the prerolling sink */
sinkpad = gst_element_get_static_pad (fakesink, "sink");
gst_pad_add_probe (sinkpad, GST_PAD_PROBE_TYPE_BLOCK, block_probe, NULL,
NULL);
gst_object_unref (sinkpad);
/* Set size limit to 1000000 byte, low threshold to 1%, high
* threshold to 5%, to make sure that even just one data push
* will exceed both thresholds.*/
g_object_set (mq,
"use-buffering", (gboolean) TRUE,
"max-size-bytes", (guint) 1000 * 1000,
"max-size-buffers", (guint) 0,
"max-size-time", (guint64) 0,
"extra-size-bytes", (guint) 0,
"extra-size-buffers", (guint) 0,
"extra-size-time", (guint64) 0,
"low-percent", (gint) 1, "high-percent", (gint) 5, NULL);
gst_segment_init (&segment, GST_FORMAT_TIME);
inputpad = gst_pad_new ("dummysrc", GST_PAD_SRC);
gst_pad_set_query_function (inputpad, mq_dummypad_query);
mq_sinkpad = gst_element_get_request_pad (mq, "sink_%u");
fail_unless (mq_sinkpad != NULL);
fail_unless (gst_pad_link (inputpad, mq_sinkpad) == GST_PAD_LINK_OK);
gst_pad_set_active (inputpad, TRUE);
gst_pad_push_event (inputpad, gst_event_new_stream_start ("test"));
gst_pad_push_event (inputpad, gst_event_new_segment (&segment));
gst_object_unref (mq_sinkpad);
fail_unless (gst_element_link (mq, fakesink));
/* Start pipeline in paused state to ensure the sink remains
* in preroll mode and blocks */
gst_element_set_state (pipe, GST_STATE_PAUSED);
/* Feed data. queue will be filled to 8% (because it pushes 80000 bytes),
* which is above both the low- and the high-threshold. This should
* produce a 100% buffering message. */
thread = g_thread_new ("push1", pad_push_datablock_thread, inputpad);
g_thread_join (thread);
check_for_buffering_msg (pipe, 100);
gst_element_set_state (pipe, GST_STATE_NULL);
gst_object_unref (inputpad);
gst_object_unref (pipe);
}
GST_END_TEST;
GST_START_TEST (test_watermark_and_fill_level)
{
/* This test checks the behavior of the fill level and
* the low/high watermarks. It also checks if the
* low/high-percent and low/high-watermark properties
* are coupled together properly. */
GstElement *pipe;
GstElement *mq, *fakesink;
GstPad *inputpad;
GstPad *mq_sinkpad;
GstPad *sinkpad;
GstSegment segment;
GThread *thread;
gint low_perc, high_perc;
/* Setup test pipeline with one multiqueue and one fakesink */
pipe = gst_pipeline_new ("testbin");
mq = gst_element_factory_make ("multiqueue", NULL);
fail_unless (mq != NULL);
gst_bin_add (GST_BIN (pipe), mq);
fakesink = gst_element_factory_make ("fakesink", NULL);
fail_unless (fakesink != NULL);
gst_bin_add (GST_BIN (pipe), fakesink);
/* Block fakesink sinkpad flow to ensure the queue isn't emptied
* by the prerolling sink */
sinkpad = gst_element_get_static_pad (fakesink, "sink");
gst_pad_add_probe (sinkpad, GST_PAD_PROBE_TYPE_BLOCK, block_probe, NULL,
NULL);
gst_object_unref (sinkpad);
g_object_set (mq,
"use-buffering", (gboolean) TRUE,
"max-size-bytes", (guint) 1000 * 1000,
"max-size-buffers", (guint) 0,
"max-size-time", (guint64) 0,
"extra-size-bytes", (guint) 0,
"extra-size-buffers", (guint) 0,
"extra-size-time", (guint64) 0,
"low-watermark", (gdouble) 0.01, "high-watermark", (gdouble) 0.10, NULL);
g_object_get (mq, "low-percent", &low_perc, "high-percent", &high_perc, NULL);
/* Check that low/high-watermark and low/high-percent are
* coupled properly. (low/high-percent are deprecated and
* exist for backwards compatibility.) */
fail_unless_equals_int (low_perc, 1);
fail_unless_equals_int (high_perc, 10);
gst_segment_init (&segment, GST_FORMAT_TIME);
inputpad = gst_pad_new ("dummysrc", GST_PAD_SRC);
gst_pad_set_query_function (inputpad, mq_dummypad_query);
mq_sinkpad = gst_element_get_request_pad (mq, "sink_%u");
fail_unless (mq_sinkpad != NULL);
fail_unless (gst_pad_link (inputpad, mq_sinkpad) == GST_PAD_LINK_OK);
gst_pad_set_active (inputpad, TRUE);
gst_pad_push_event (inputpad, gst_event_new_stream_start ("test"));
gst_pad_push_event (inputpad, gst_event_new_segment (&segment));
gst_object_unref (mq_sinkpad);
fail_unless (gst_element_link (mq, fakesink));
/* Start pipeline in paused state to ensure the sink remains
* in preroll mode and blocks */
gst_element_set_state (pipe, GST_STATE_PAUSED);
/* Feed data. queue will be filled to 8% (because it pushes 80000 bytes),
* which is below the high-threshold, provoking a buffering message. */
thread = g_thread_new ("push1", pad_push_datablock_thread, inputpad);
g_thread_join (thread);
/* Check for the buffering message; it should indicate 80% fill level
* (Note that the percentage from the message is normalized) */
check_for_buffering_msg (pipe, 80);
/* Increase the buffer size and lower the watermarks to test
* if <1% watermarks are supported. */
g_object_set (mq,
"max-size-bytes", (guint) 20 * 1000 * 1000,
"low-watermark", (gdouble) 0.0001, "high-watermark", (gdouble) 0.005,
NULL);
/* First buffering message is posted after the max-size-bytes limit
* is set to 20000000 bytes & the low-watermark is set. Since the
* multiqueue contains 80000 bytes, and the high watermark still is
* 0.1 at this point, and the buffer level 80000 / 20000000 = 0.004 is
* normalized by 0.1: 0.004 / 0.1 => buffering percentage 4%. */
check_for_buffering_msg (pipe, 4);
/* Second buffering message is posted after the high-watermark limit
* is set to 0.005. This time, the buffer level is normalized this way:
* 0.004 / 0.005 => buffering percentage 80%. */
check_for_buffering_msg (pipe, 80);
gst_element_set_state (pipe, GST_STATE_NULL);
gst_object_unref (inputpad);
gst_object_unref (pipe);
}
GST_END_TEST;
GST_START_TEST (test_high_threshold_change)
{
/* This test checks what happens if the high threshold is changed to a
* value below the current buffer fill level. Expected behavior is for
* multiqueue to emit a 100% buffering message in that case. */
GstElement *pipe;
GstElement *mq, *fakesink;
GstPad *inputpad;
GstPad *mq_sinkpad;
GstPad *sinkpad;
GstSegment segment;
GThread *thread;
/* Setup test pipeline with one multiqueue and one fakesink */
pipe = gst_pipeline_new ("testbin");
mq = gst_element_factory_make ("multiqueue", NULL);
fail_unless (mq != NULL);
gst_bin_add (GST_BIN (pipe), mq);
fakesink = gst_element_factory_make ("fakesink", NULL);
fail_unless (fakesink != NULL);
gst_bin_add (GST_BIN (pipe), fakesink);
/* Block fakesink sinkpad flow to ensure the queue isn't emptied
* by the prerolling sink */
sinkpad = gst_element_get_static_pad (fakesink, "sink");
gst_pad_add_probe (sinkpad, GST_PAD_PROBE_TYPE_BLOCK, block_probe, NULL,
NULL);
gst_object_unref (sinkpad);
g_object_set (mq,
"use-buffering", (gboolean) TRUE,
"max-size-bytes", (guint) 1000 * 1000,
"max-size-buffers", (guint) 0,
"max-size-time", (guint64) 0,
"extra-size-bytes", (guint) 0,
"extra-size-buffers", (guint) 0,
"extra-size-time", (guint64) 0,
"low-percent", (gint) 1, "high-percent", (gint) 99, NULL);
gst_segment_init (&segment, GST_FORMAT_TIME);
inputpad = gst_pad_new ("dummysrc", GST_PAD_SRC);
gst_pad_set_query_function (inputpad, mq_dummypad_query);
mq_sinkpad = gst_element_get_request_pad (mq, "sink_%u");
fail_unless (mq_sinkpad != NULL);
fail_unless (gst_pad_link (inputpad, mq_sinkpad) == GST_PAD_LINK_OK);
gst_pad_set_active (inputpad, TRUE);
gst_pad_push_event (inputpad, gst_event_new_stream_start ("test"));
gst_pad_push_event (inputpad, gst_event_new_segment (&segment));
gst_object_unref (mq_sinkpad);
fail_unless (gst_element_link (mq, fakesink));
/* Start pipeline in paused state to ensure the sink remains
* in preroll mode and blocks */
gst_element_set_state (pipe, GST_STATE_PAUSED);
/* Feed data. queue will be filled to 8% (because it pushes 80000 bytes),
* which is below the high-threshold, provoking a buffering message. */
thread = g_thread_new ("push1", pad_push_datablock_thread, inputpad);
g_thread_join (thread);
/* Check for the buffering message; it should indicate 8% fill level
* (Note that the percentage from the message is normalized, but since
* the high threshold is at 99%, it should still apply) */
check_for_buffering_msg (pipe, 8);
/* Set high threshold to half of what it was before. This means that the
* relative fill level doubles. As a result, this should trigger a buffering
* message with a percentage of 16%. */
g_object_set (mq, "high-percent", (gint) 50, NULL);
check_for_buffering_msg (pipe, 16);
/* Set high threshold to a value that lies below the current fill level.
* This should trigger a 100% buffering message immediately, even without
* pushing in extra data. */
g_object_set (mq, "high-percent", (gint) 5, NULL);
check_for_buffering_msg (pipe, 100);
gst_element_set_state (pipe, GST_STATE_NULL);
gst_object_unref (inputpad);
gst_object_unref (pipe);
}
GST_END_TEST;
GST_START_TEST (test_low_threshold_change)
{
/* This tests what happens if the queue isn't currently buffering and the
* low-threshold is raised above the current fill level. */
GstElement *pipe;
GstElement *mq, *fakesink;
GstPad *inputpad;
GstPad *mq_sinkpad;
GstPad *sinkpad;
GstSegment segment;
GThread *thread;
/* Setup test pipeline with one multiqueue and one fakesink */
pipe = gst_pipeline_new ("testbin");
mq = gst_element_factory_make ("multiqueue", NULL);
fail_unless (mq != NULL);
gst_bin_add (GST_BIN (pipe), mq);
fakesink = gst_element_factory_make ("fakesink", NULL);
fail_unless (fakesink != NULL);
gst_bin_add (GST_BIN (pipe), fakesink);
/* Block fakesink sinkpad flow to ensure the queue isn't emptied
* by the prerolling sink */
sinkpad = gst_element_get_static_pad (fakesink, "sink");
gst_pad_add_probe (sinkpad, GST_PAD_PROBE_TYPE_BLOCK, block_probe, NULL,
NULL);
gst_object_unref (sinkpad);
/* Enable buffering and set the low/high thresholds to 1%/5%. This ensures
* that after pushing one data block, the high threshold is reached, and
* buffering ceases. */
g_object_set (mq,
"use-buffering", (gboolean) TRUE,
"max-size-bytes", (guint) 1000 * 1000,
"max-size-buffers", (guint) 0,
"max-size-time", (guint64) 0,
"extra-size-bytes", (guint) 0,
"extra-size-buffers", (guint) 0,
"extra-size-time", (guint64) 0,
"low-percent", (gint) 1, "high-percent", (gint) 5, NULL);
gst_segment_init (&segment, GST_FORMAT_TIME);
inputpad = gst_pad_new ("dummysrc", GST_PAD_SRC);
gst_pad_set_query_function (inputpad, mq_dummypad_query);
mq_sinkpad = gst_element_get_request_pad (mq, "sink_%u");
fail_unless (mq_sinkpad != NULL);
fail_unless (gst_pad_link (inputpad, mq_sinkpad) == GST_PAD_LINK_OK);
gst_pad_set_active (inputpad, TRUE);
gst_pad_push_event (inputpad, gst_event_new_stream_start ("test"));
gst_pad_push_event (inputpad, gst_event_new_segment (&segment));
gst_object_unref (mq_sinkpad);
fail_unless (gst_element_link (mq, fakesink));
/* Start pipeline in paused state to ensure the sink remains
* in preroll mode and blocks */
gst_element_set_state (pipe, GST_STATE_PAUSED);
/* Feed data. queue will be filled to 8% (because it pushes 80000 bytes),
* which is above the high-threshold, ensuring that the queue disables
* its buffering mode internally. */
thread = g_thread_new ("push1", pad_push_datablock_thread, inputpad);
g_thread_join (thread);
/* Check for the buffering message; it should indicate 100% relative fill
* level (Note that the percentage from the message is normalized) */
check_for_buffering_msg (pipe, 100);
/* Set low threshold to a 10%, which is above the current fill level of 8%.
* As a result, the queue must re-enable its buffering mode, and post the
* current relative fill level of 40% (since high-percent is also set to 20%
* and 8%/20% = 40%). */
g_object_set (mq, "high-percent", (gint) 20, "low-percent", (gint) 10, NULL);
check_for_buffering_msg (pipe, 40);
gst_element_set_state (pipe, GST_STATE_NULL);
gst_object_unref (inputpad);
gst_object_unref (pipe);
}
GST_END_TEST;
static gpointer
pad_push_thread (gpointer data)
{
GstPad *pad = data;
GstBuffer *buf;
buf = gst_buffer_new ();
gst_pad_push (pad, buf);
return NULL;
}
GST_START_TEST (test_limit_changes)
{
/* This test creates a multiqueue with 1 stream. The limit of the queue
* is two buffers, we check if we block once this is reached. Then we
* change the limit to three buffers and check if this is waking up
* the queue and we get the third buffer.
*/
GstElement *pipe;
GstElement *mq, *fakesink;
GstPad *inputpad;
GstPad *mq_sinkpad;
GstSegment segment;
GThread *thread;
pipe = gst_pipeline_new ("testbin");
mq = gst_element_factory_make ("multiqueue", NULL);
fail_unless (mq != NULL);
gst_bin_add (GST_BIN (pipe), mq);
fakesink = gst_element_factory_make ("fakesink", NULL);
fail_unless (fakesink != NULL);
gst_bin_add (GST_BIN (pipe), fakesink);
g_object_set (mq,
"max-size-bytes", (guint) 0,
"max-size-buffers", (guint) 2,
"max-size-time", (guint64) 0,
"extra-size-bytes", (guint) 0,
"extra-size-buffers", (guint) 0, "extra-size-time", (guint64) 0, NULL);
gst_segment_init (&segment, GST_FORMAT_TIME);
inputpad = gst_pad_new ("dummysrc", GST_PAD_SRC);
gst_pad_set_query_function (inputpad, mq_dummypad_query);
mq_sinkpad = gst_element_get_request_pad (mq, "sink_%u");
fail_unless (mq_sinkpad != NULL);
fail_unless (gst_pad_link (inputpad, mq_sinkpad) == GST_PAD_LINK_OK);
gst_pad_set_active (inputpad, TRUE);
gst_pad_push_event (inputpad, gst_event_new_stream_start ("test"));
gst_pad_push_event (inputpad, gst_event_new_segment (&segment));
gst_object_unref (mq_sinkpad);
fail_unless (gst_element_link (mq, fakesink));
gst_element_set_state (pipe, GST_STATE_PAUSED);
thread = g_thread_new ("push1", pad_push_thread, inputpad);
g_thread_join (thread);
thread = g_thread_new ("push2", pad_push_thread, inputpad);
g_thread_join (thread);
thread = g_thread_new ("push3", pad_push_thread, inputpad);
g_thread_join (thread);
thread = g_thread_new ("push4", pad_push_thread, inputpad);
/* Wait until we are actually blocking... we unfortunately can't
* know that without sleeping */
g_usleep (G_USEC_PER_SEC);
g_object_set (mq, "max-size-buffers", (guint) 3, NULL);
g_thread_join (thread);
g_object_set (mq, "max-size-buffers", (guint) 4, NULL);
thread = g_thread_new ("push5", pad_push_thread, inputpad);
g_thread_join (thread);
gst_element_set_state (pipe, GST_STATE_NULL);
gst_object_unref (inputpad);
gst_object_unref (pipe);
}
GST_END_TEST;
static GMutex block_mutex;
static GCond block_cond;
static gint unblock_count;
static gboolean expect_overrun;
static GstFlowReturn
pad_chain_block (GstPad * pad, GstObject * parent, GstBuffer * buffer)
{
g_mutex_lock (&block_mutex);
while (unblock_count == 0) {
g_cond_wait (&block_cond, &block_mutex);
}
if (unblock_count > 0) {
unblock_count--;
}
g_mutex_unlock (&block_mutex);
gst_buffer_unref (buffer);
return GST_FLOW_OK;
}
static gboolean
pad_event_always_ok (GstPad * pad, GstObject * parent, GstEvent * event)
{
gst_event_unref (event);
return TRUE;
}
static void
mq_overrun (GstElement * mq, gpointer udata)
{
fail_unless (expect_overrun);
/* unblock always so we don't get stuck */
g_mutex_lock (&block_mutex);
unblock_count = 2; /* let the PTS=0 and PTS=none go */
g_cond_signal (&block_cond);
g_mutex_unlock (&block_mutex);
}
GST_START_TEST (test_buffering_with_none_pts)
{
/*
* This test creates a multiqueue where source pushing blocks so we can check
* how its buffering level is reacting to GST_CLOCK_TIME_NONE buffers
* mixed with properly timestamped buffers.
*
* Sequence of pushing:
* pts=0
* pts=none
* pts=1 (it gets full now)
* pts=none (overrun expected)
*/
GstElement *mq;
GstPad *inputpad;
GstPad *outputpad;
GstPad *mq_sinkpad;
GstPad *mq_srcpad;
GstSegment segment;
GstBuffer *buffer;
g_mutex_init (&block_mutex);
g_cond_init (&block_cond);
unblock_count = 0;
expect_overrun = FALSE;
mq = gst_element_factory_make ("multiqueue", NULL);
fail_unless (mq != NULL);
g_object_set (mq,
"max-size-bytes", (guint) 0,
"max-size-buffers", (guint) 0,
"max-size-time", (guint64) GST_SECOND, NULL);
g_signal_connect (mq, "overrun", (GCallback) mq_overrun, NULL);
gst_segment_init (&segment, GST_FORMAT_TIME);
inputpad = gst_pad_new ("dummysrc", GST_PAD_SRC);
outputpad = gst_pad_new ("dummysink", GST_PAD_SINK);
gst_pad_set_chain_function (outputpad, pad_chain_block);
gst_pad_set_event_function (outputpad, pad_event_always_ok);
mq_sinkpad = gst_element_get_request_pad (mq, "sink_%u");
mq_srcpad = gst_element_get_static_pad (mq, "src_0");
fail_unless (mq_sinkpad != NULL);
fail_unless (gst_pad_link (inputpad, mq_sinkpad) == GST_PAD_LINK_OK);
fail_unless (gst_pad_link (mq_srcpad, outputpad) == GST_PAD_LINK_OK);
gst_pad_set_active (inputpad, TRUE);
gst_pad_set_active (outputpad, TRUE);
gst_pad_push_event (inputpad, gst_event_new_stream_start ("test"));
gst_pad_push_event (inputpad, gst_event_new_segment (&segment));
gst_element_set_state (mq, GST_STATE_PAUSED);
/* push a buffer with PTS = 0 */
buffer = gst_buffer_new ();
GST_BUFFER_PTS (buffer) = 0;
fail_unless (gst_pad_push (inputpad, buffer) == GST_FLOW_OK);
/* push a buffer with PTS = NONE */
buffer = gst_buffer_new ();
GST_BUFFER_PTS (buffer) = GST_CLOCK_TIME_NONE;
fail_unless (gst_pad_push (inputpad, buffer) == GST_FLOW_OK);
/* push a buffer with PTS = 1s, so we have 1s of data in multiqueue, we are
* full */
buffer = gst_buffer_new ();
GST_BUFFER_PTS (buffer) = GST_SECOND;
fail_unless (gst_pad_push (inputpad, buffer) == GST_FLOW_OK);
/* push a buffer with PTS = NONE, the queue is full so it should overrun */
expect_overrun = TRUE;
buffer = gst_buffer_new ();
GST_BUFFER_PTS (buffer) = GST_CLOCK_TIME_NONE;
fail_unless (gst_pad_push (inputpad, buffer) == GST_FLOW_OK);
g_mutex_lock (&block_mutex);
unblock_count = -1;
g_cond_signal (&block_cond);
g_mutex_unlock (&block_mutex);
gst_element_set_state (mq, GST_STATE_NULL);
gst_object_unref (inputpad);
gst_object_unref (outputpad);
gst_object_unref (mq_sinkpad);
gst_object_unref (mq_srcpad);
gst_object_unref (mq);
g_mutex_clear (&block_mutex);
g_cond_clear (&block_cond);
}
GST_END_TEST;
static gboolean
event_func_signal (GstPad * sinkpad, GstObject * parent, GstEvent * event)
{
struct PadData *pad_data;
GST_LOG_OBJECT (sinkpad, "%s event", GST_EVENT_TYPE_NAME (event));
pad_data = gst_pad_get_element_private (sinkpad);
g_mutex_lock (pad_data->mutex);
++pad_data->event_count;
g_cond_broadcast (pad_data->cond);
g_mutex_unlock (pad_data->mutex);
gst_event_unref (event);
return TRUE;
}
GST_START_TEST (test_initial_events_nodelay)
{
struct PadData pad_data = { 0, };
GstElement *pipe;
GstElement *mq;
GstPad *inputpad;
GstPad *sinkpad;
GstSegment segment;
GstCaps *caps;
GMutex mutex;
GCond cond;
g_mutex_init (&mutex);
g_cond_init (&cond);
pipe = gst_pipeline_new ("testbin");
mq = gst_element_factory_make ("multiqueue", NULL);
fail_unless (mq != NULL);
gst_bin_add (GST_BIN (pipe), mq);
{
GstPad *mq_srcpad, *mq_sinkpad;
inputpad = gst_pad_new ("dummysrc", GST_PAD_SRC);
mq_sinkpad = gst_element_get_request_pad (mq, "sink_%u");
fail_unless (mq_sinkpad != NULL);
fail_unless (gst_pad_link (inputpad, mq_sinkpad) == GST_PAD_LINK_OK);
gst_pad_set_active (inputpad, TRUE);
mq_srcpad = mq_sinkpad_to_srcpad (mq, mq_sinkpad);
sinkpad = gst_pad_new ("dummysink", GST_PAD_SINK);
gst_pad_set_event_function (sinkpad, event_func_signal);
pad_data.event_count = 0;
pad_data.cond = &cond;
pad_data.mutex = &mutex;
gst_pad_set_element_private (sinkpad, &pad_data);
fail_unless (gst_pad_link (mq_srcpad, sinkpad) == GST_PAD_LINK_OK);
gst_pad_set_active (sinkpad, TRUE);
gst_object_unref (mq_sinkpad);
gst_object_unref (mq_srcpad);
}
/* Run the test: push events through multiqueue */
gst_element_set_state (pipe, GST_STATE_PLAYING);
gst_pad_push_event (inputpad, gst_event_new_stream_start ("test"));
caps = gst_caps_new_empty_simple ("foo/x-bar");
gst_pad_push_event (inputpad, gst_event_new_caps (caps));
gst_caps_unref (caps);
gst_segment_init (&segment, GST_FORMAT_TIME);
gst_pad_push_event (inputpad, gst_event_new_segment (&segment));
g_mutex_lock (&mutex);
while (pad_data.event_count < 3) {
GST_LOG ("%d events so far, waiting for more", pad_data.event_count);
g_cond_wait (&cond, &mutex);
}
g_mutex_unlock (&mutex);
/* Clean up */
{
GstPad *mq_input = gst_pad_get_peer (inputpad);
gst_pad_unlink (inputpad, mq_input);
gst_element_release_request_pad (mq, mq_input);
gst_object_unref (mq_input);
gst_object_unref (inputpad);
gst_object_unref (sinkpad);
}
gst_element_set_state (pipe, GST_STATE_NULL);
gst_object_unref (pipe);
g_cond_clear (&cond);
g_mutex_clear (&mutex);
}
GST_END_TEST;
static void
check_for_stream_status_msg (GstElement * pipeline, GstElement * multiqueue,
GstStreamStatusType expected_type)
{
GEnumClass *klass;
const gchar *expected_nick, *nick;
GstMessage *msg;
GstStreamStatusType type;
GstElement *owner;
klass = g_type_class_ref (GST_TYPE_STREAM_STATUS_TYPE);
expected_nick = g_enum_get_value (klass, expected_type)->value_nick;
GST_LOG ("waiting for stream-status %s message", expected_nick);
msg = gst_bus_poll (GST_ELEMENT_BUS (pipeline),
GST_MESSAGE_STREAM_STATUS | GST_MESSAGE_ERROR, -1);
fail_if (GST_MESSAGE_TYPE (msg) == GST_MESSAGE_ERROR,
"Expected stream-status message, got error message");
gst_message_parse_stream_status (msg, &type, &owner);
nick = g_enum_get_value (klass, type)->value_nick;
fail_unless (owner == multiqueue,
"Got incorrect owner: %" GST_PTR_FORMAT " expected: %" GST_PTR_FORMAT,
owner, multiqueue);
fail_unless (type == expected_type,
"Got incorrect type: %s expected: %s", nick, expected_nick);
gst_message_unref (msg);
g_type_class_unref (klass);
}
GST_START_TEST (test_stream_status_messages)
{
GstElement *pipe, *mq;
GstPad *pad;
pipe = gst_pipeline_new ("pipeline");
mq = gst_element_factory_make ("multiqueue", NULL);
gst_bin_add (GST_BIN (pipe), mq);
pad = gst_element_get_request_pad (mq, "sink_%u");
gst_object_unref (pad);
gst_element_set_state (pipe, GST_STATE_PAUSED);
check_for_stream_status_msg (pipe, mq, GST_STREAM_STATUS_TYPE_CREATE);
check_for_stream_status_msg (pipe, mq, GST_STREAM_STATUS_TYPE_ENTER);
pad = gst_element_get_request_pad (mq, "sink_%u");
gst_object_unref (pad);
check_for_stream_status_msg (pipe, mq, GST_STREAM_STATUS_TYPE_CREATE);
check_for_stream_status_msg (pipe, mq, GST_STREAM_STATUS_TYPE_ENTER);
gst_element_set_state (pipe, GST_STATE_NULL);
gst_object_unref (pipe);
}
GST_END_TEST;
static Suite *
multiqueue_suite (void)
{
Suite *s = suite_create ("multiqueue");
TCase *tc_chain = tcase_create ("general");
suite_add_tcase (s, tc_chain);
tcase_add_test (tc_chain, test_simple_create_destroy);
tcase_add_test (tc_chain, test_simple_pipeline);
tcase_add_test (tc_chain, test_simple_shutdown_while_running);
tcase_add_test (tc_chain, test_request_pads);
tcase_add_test (tc_chain, test_request_pads_named);
/* Disabled, The test (and not multiqueue itself) is racy.
* See https://bugzilla.gnome.org/show_bug.cgi?id=708661 */
tcase_skip_broken_test (tc_chain, test_output_order);
tcase_add_test (tc_chain, test_not_linked_eos);
tcase_add_test (tc_chain, test_sparse_stream);
tcase_add_test (tc_chain, test_initial_fill_above_high_threshold);
tcase_add_test (tc_chain, test_watermark_and_fill_level);
tcase_add_test (tc_chain, test_high_threshold_change);
tcase_add_test (tc_chain, test_low_threshold_change);
tcase_add_test (tc_chain, test_limit_changes);
tcase_add_test (tc_chain, test_buffering_with_none_pts);
tcase_add_test (tc_chain, test_initial_events_nodelay);
tcase_add_test (tc_chain, test_stream_status_messages);
return s;
}
GST_CHECK_MAIN (multiqueue)