| /* GStreamer input selector |
| * Copyright (C) 2003 Julien Moutte <julien@moutte.net> |
| * Copyright (C) 2005 Ronald S. Bultje <rbultje@ronald.bitfreak.net> |
| * Copyright (C) 2005 Jan Schmidt <thaytan@mad.scientist.com> |
| * Copyright (C) 2007 Wim Taymans <wim.taymans@gmail.com> |
| * Copyright (C) 2007 Andy Wingo <wingo@pobox.com> |
| * Copyright (C) 2008 Nokia Corporation. (contact <stefan.kost@nokia.com>) |
| * Copyright (C) 2011 Sebastian Dröge <sebastian.droege@collabora.co.uk> |
| * |
| * This library is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU Library General Public |
| * License as published by the Free Software Foundation; either |
| * version 2 of the License, or (at your option) any later version. |
| * |
| * This library is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * Library General Public License for more details. |
| * |
| * You should have received a copy of the GNU Library General Public |
| * License along with this library; if not, write to the |
| * Free Software Foundation, Inc., 51 Franklin St, Fifth Floor, |
| * Boston, MA 02110-1301, USA. |
| */ |
| |
| /** |
| * SECTION:element-input-selector |
| * @see_also: #GstOutputSelector |
| * |
| * Direct one out of N input streams to the output pad. |
| * |
| * The input pads are from a GstPad subclass and have additional |
| * properties, which users may find useful, namely: |
| * |
| * <itemizedlist> |
| * <listitem> |
| * "running-time": Running time of stream on pad (#gint64) |
| * </listitem> |
| * <listitem> |
| * "tags": The currently active tags on the pad (#GstTagList, boxed type) |
| * </listitem> |
| * <listitem> |
| * "active": If the pad is currently active (#gboolean) |
| * </listitem> |
| * <listitem> |
| * "always-ok" : Make an inactive pads return #GST_FLOW_OK instead of |
| * #GST_FLOW_NOT_LINKED |
| * </listitem> |
| * </itemizedlist> |
| */ |
| |
| #ifdef HAVE_CONFIG_H |
| #include "config.h" |
| #endif |
| |
| #include <string.h> |
| |
| #include "gstinputselector.h" |
| |
| #define DEBUG_CACHED_BUFFERS 0 |
| |
| GST_DEBUG_CATEGORY_STATIC (input_selector_debug); |
| #define GST_CAT_DEFAULT input_selector_debug |
| |
| #define GST_TYPE_INPUT_SELECTOR_SYNC_MODE (gst_input_selector_sync_mode_get_type()) |
| static GType |
| gst_input_selector_sync_mode_get_type (void) |
| { |
| static GType type = 0; |
| static const GEnumValue data[] = { |
| {GST_INPUT_SELECTOR_SYNC_MODE_ACTIVE_SEGMENT, |
| "Sync using the current active segment", |
| "active-segment"}, |
| {GST_INPUT_SELECTOR_SYNC_MODE_CLOCK, "Sync using the clock", "clock"}, |
| {0, NULL, NULL}, |
| }; |
| |
| if (!type) { |
| type = g_enum_register_static ("GstInputSelectorSyncMode", data); |
| } |
| return type; |
| } |
| |
| #define GST_INPUT_SELECTOR_GET_LOCK(sel) (&((GstInputSelector*)(sel))->lock) |
| #define GST_INPUT_SELECTOR_GET_COND(sel) (&((GstInputSelector*)(sel))->cond) |
| #define GST_INPUT_SELECTOR_LOCK(sel) (g_mutex_lock (GST_INPUT_SELECTOR_GET_LOCK(sel))) |
| #define GST_INPUT_SELECTOR_UNLOCK(sel) (g_mutex_unlock (GST_INPUT_SELECTOR_GET_LOCK(sel))) |
| #define GST_INPUT_SELECTOR_WAIT(sel) (g_cond_wait (GST_INPUT_SELECTOR_GET_COND(sel), \ |
| GST_INPUT_SELECTOR_GET_LOCK(sel))) |
| #define GST_INPUT_SELECTOR_BROADCAST(sel) (g_cond_broadcast (GST_INPUT_SELECTOR_GET_COND(sel))) |
| |
| static GstStaticPadTemplate gst_input_selector_sink_factory = |
| GST_STATIC_PAD_TEMPLATE ("sink_%u", |
| GST_PAD_SINK, |
| GST_PAD_REQUEST, |
| GST_STATIC_CAPS_ANY); |
| |
| static GstStaticPadTemplate gst_input_selector_src_factory = |
| GST_STATIC_PAD_TEMPLATE ("src", |
| GST_PAD_SRC, |
| GST_PAD_ALWAYS, |
| GST_STATIC_CAPS_ANY); |
| |
| enum |
| { |
| PROP_0, |
| PROP_N_PADS, |
| PROP_ACTIVE_PAD, |
| PROP_SYNC_STREAMS, |
| PROP_SYNC_MODE, |
| PROP_CACHE_BUFFERS |
| }; |
| |
| #define DEFAULT_SYNC_STREAMS TRUE |
| #define DEFAULT_SYNC_MODE GST_INPUT_SELECTOR_SYNC_MODE_ACTIVE_SEGMENT |
| #define DEFAULT_CACHE_BUFFERS FALSE |
| #define DEFAULT_PAD_ALWAYS_OK TRUE |
| |
| enum |
| { |
| PROP_PAD_0, |
| PROP_PAD_RUNNING_TIME, |
| PROP_PAD_TAGS, |
| PROP_PAD_ACTIVE, |
| PROP_PAD_ALWAYS_OK |
| }; |
| |
| static void gst_input_selector_active_pad_changed (GstInputSelector * sel, |
| GParamSpec * pspec, gpointer user_data); |
| static inline gboolean gst_input_selector_is_active_sinkpad (GstInputSelector * |
| sel, GstPad * pad); |
| static GstPad *gst_input_selector_get_active_sinkpad (GstInputSelector * sel); |
| static GstPad *gst_input_selector_get_linked_pad (GstInputSelector * sel, |
| GstPad * pad, gboolean strict); |
| |
| #define GST_TYPE_SELECTOR_PAD \ |
| (gst_selector_pad_get_type()) |
| #define GST_SELECTOR_PAD(obj) \ |
| (G_TYPE_CHECK_INSTANCE_CAST ((obj), GST_TYPE_SELECTOR_PAD, GstSelectorPad)) |
| #define GST_SELECTOR_PAD_CLASS(klass) \ |
| (G_TYPE_CHECK_CLASS_CAST ((klass), GST_TYPE_SELECTOR_PAD, GstSelectorPadClass)) |
| #define GST_IS_SELECTOR_PAD(obj) \ |
| (G_TYPE_CHECK_INSTANCE_TYPE ((obj), GST_TYPE_SELECTOR_PAD)) |
| #define GST_IS_SELECTOR_PAD_CLASS(klass) \ |
| (G_TYPE_CHECK_CLASS_TYPE ((klass), GST_TYPE_SELECTOR_PAD)) |
| #define GST_SELECTOR_PAD_CAST(obj) \ |
| ((GstSelectorPad *)(obj)) |
| |
| typedef struct _GstSelectorPad GstSelectorPad; |
| typedef struct _GstSelectorPadClass GstSelectorPadClass; |
| typedef struct _GstSelectorPadCachedBuffer GstSelectorPadCachedBuffer; |
| |
| struct _GstSelectorPad |
| { |
| GstPad parent; |
| |
| gboolean pushed; /* when buffer was pushed downstream since activation */ |
| gboolean eos; /* when EOS has been received */ |
| gboolean eos_sent; /* when EOS was sent downstream */ |
| gboolean discont; /* after switching we create a discont */ |
| gboolean flushing; /* set after flush-start and before flush-stop */ |
| gboolean always_ok; |
| GstTagList *tags; /* last tags received on the pad */ |
| |
| GstSegment segment; /* the current segment on the pad */ |
| guint32 segment_seqnum; /* sequence number of the current segment */ |
| |
| gboolean events_pending; /* TRUE if sticky events need to be updated */ |
| |
| gboolean sending_cached_buffers; |
| GQueue *cached_buffers; |
| }; |
| |
| struct _GstSelectorPadCachedBuffer |
| { |
| GstBuffer *buffer; |
| GstSegment segment; |
| }; |
| |
| struct _GstSelectorPadClass |
| { |
| GstPadClass parent; |
| }; |
| |
| GType gst_selector_pad_get_type (void); |
| static void gst_selector_pad_finalize (GObject * object); |
| static void gst_selector_pad_get_property (GObject * object, |
| guint prop_id, GValue * value, GParamSpec * pspec); |
| static void gst_selector_pad_set_property (GObject * object, |
| guint prop_id, const GValue * value, GParamSpec * pspec); |
| |
| static gint64 gst_selector_pad_get_running_time (GstSelectorPad * pad); |
| static void gst_selector_pad_reset (GstSelectorPad * pad); |
| static gboolean gst_selector_pad_event (GstPad * pad, GstObject * parent, |
| GstEvent * event); |
| static gboolean gst_selector_pad_query (GstPad * pad, GstObject * parent, |
| GstQuery * query); |
| static GstIterator *gst_selector_pad_iterate_linked_pads (GstPad * pad, |
| GstObject * parent); |
| static GstFlowReturn gst_selector_pad_chain (GstPad * pad, GstObject * parent, |
| GstBuffer * buf); |
| static void gst_selector_pad_cache_buffer (GstSelectorPad * selpad, |
| GstBuffer * buffer); |
| static void gst_selector_pad_free_cached_buffers (GstSelectorPad * selpad); |
| |
| G_DEFINE_TYPE (GstSelectorPad, gst_selector_pad, GST_TYPE_PAD); |
| |
| static void |
| gst_selector_pad_class_init (GstSelectorPadClass * klass) |
| { |
| GObjectClass *gobject_class; |
| |
| gobject_class = (GObjectClass *) klass; |
| |
| gobject_class->finalize = gst_selector_pad_finalize; |
| |
| gobject_class->get_property = gst_selector_pad_get_property; |
| gobject_class->set_property = gst_selector_pad_set_property; |
| |
| g_object_class_install_property (gobject_class, PROP_PAD_RUNNING_TIME, |
| g_param_spec_int64 ("running-time", "Running time", |
| "Running time of stream on pad", 0, G_MAXINT64, 0, |
| G_PARAM_READABLE | G_PARAM_STATIC_STRINGS)); |
| g_object_class_install_property (gobject_class, PROP_PAD_TAGS, |
| g_param_spec_boxed ("tags", "Tags", |
| "The currently active tags on the pad", GST_TYPE_TAG_LIST, |
| G_PARAM_READABLE | G_PARAM_STATIC_STRINGS)); |
| g_object_class_install_property (gobject_class, PROP_PAD_ACTIVE, |
| g_param_spec_boolean ("active", "Active", |
| "If the pad is currently active", FALSE, |
| G_PARAM_READABLE | G_PARAM_STATIC_STRINGS)); |
| /* FIXME: better property name? */ |
| g_object_class_install_property (gobject_class, PROP_PAD_ALWAYS_OK, |
| g_param_spec_boolean ("always-ok", "Always OK", |
| "Make an inactive pad return OK instead of NOT_LINKED", |
| DEFAULT_PAD_ALWAYS_OK, G_PARAM_READWRITE | G_PARAM_STATIC_STRINGS)); |
| } |
| |
| static void |
| gst_selector_pad_init (GstSelectorPad * pad) |
| { |
| pad->always_ok = DEFAULT_PAD_ALWAYS_OK; |
| gst_selector_pad_reset (pad); |
| } |
| |
| static void |
| gst_selector_pad_finalize (GObject * object) |
| { |
| GstSelectorPad *pad; |
| |
| pad = GST_SELECTOR_PAD_CAST (object); |
| |
| if (pad->tags) |
| gst_tag_list_unref (pad->tags); |
| gst_selector_pad_free_cached_buffers (pad); |
| |
| G_OBJECT_CLASS (gst_selector_pad_parent_class)->finalize (object); |
| } |
| |
| static void |
| gst_selector_pad_set_property (GObject * object, guint prop_id, |
| const GValue * value, GParamSpec * pspec) |
| { |
| GstSelectorPad *spad = GST_SELECTOR_PAD_CAST (object); |
| |
| switch (prop_id) { |
| case PROP_PAD_ALWAYS_OK: |
| GST_OBJECT_LOCK (object); |
| spad->always_ok = g_value_get_boolean (value); |
| GST_OBJECT_UNLOCK (object); |
| break; |
| default: |
| G_OBJECT_WARN_INVALID_PROPERTY_ID (object, prop_id, pspec); |
| break; |
| } |
| } |
| |
| static void |
| gst_selector_pad_get_property (GObject * object, guint prop_id, |
| GValue * value, GParamSpec * pspec) |
| { |
| GstSelectorPad *spad = GST_SELECTOR_PAD_CAST (object); |
| |
| switch (prop_id) { |
| case PROP_PAD_RUNNING_TIME: |
| g_value_set_int64 (value, gst_selector_pad_get_running_time (spad)); |
| break; |
| case PROP_PAD_TAGS: |
| GST_OBJECT_LOCK (object); |
| g_value_set_boxed (value, spad->tags); |
| GST_OBJECT_UNLOCK (object); |
| break; |
| case PROP_PAD_ACTIVE: |
| { |
| GstInputSelector *sel; |
| |
| sel = GST_INPUT_SELECTOR (gst_pad_get_parent (spad)); |
| if (sel) { |
| g_value_set_boolean (value, gst_input_selector_is_active_sinkpad (sel, |
| GST_PAD_CAST (spad))); |
| gst_object_unref (sel); |
| } else { |
| g_value_set_boolean (value, FALSE); |
| } |
| break; |
| } |
| case PROP_PAD_ALWAYS_OK: |
| GST_OBJECT_LOCK (object); |
| g_value_set_boolean (value, spad->always_ok); |
| GST_OBJECT_UNLOCK (object); |
| break; |
| default: |
| G_OBJECT_WARN_INVALID_PROPERTY_ID (object, prop_id, pspec); |
| break; |
| } |
| } |
| |
| static gint64 |
| gst_selector_pad_get_running_time (GstSelectorPad * pad) |
| { |
| gint64 ret = 0; |
| |
| GST_OBJECT_LOCK (pad); |
| if (pad->segment.format == GST_FORMAT_TIME) { |
| ret = |
| gst_segment_to_running_time (&pad->segment, pad->segment.format, |
| pad->segment.position); |
| } |
| GST_OBJECT_UNLOCK (pad); |
| |
| GST_DEBUG_OBJECT (pad, "running time: %" GST_TIME_FORMAT |
| " segment: %" GST_SEGMENT_FORMAT, GST_TIME_ARGS (ret), &pad->segment); |
| |
| return ret; |
| } |
| |
| /* must be called with the SELECTOR_LOCK */ |
| static void |
| gst_selector_pad_reset (GstSelectorPad * pad) |
| { |
| GST_OBJECT_LOCK (pad); |
| pad->pushed = FALSE; |
| pad->eos = FALSE; |
| pad->eos_sent = FALSE; |
| pad->events_pending = FALSE; |
| pad->discont = FALSE; |
| pad->flushing = FALSE; |
| gst_segment_init (&pad->segment, GST_FORMAT_UNDEFINED); |
| pad->sending_cached_buffers = FALSE; |
| gst_selector_pad_free_cached_buffers (pad); |
| GST_OBJECT_UNLOCK (pad); |
| } |
| |
| static GstSelectorPadCachedBuffer * |
| gst_selector_pad_new_cached_buffer (GstSelectorPad * selpad, GstBuffer * buffer) |
| { |
| GstSelectorPadCachedBuffer *cached_buffer = |
| g_slice_new (GstSelectorPadCachedBuffer); |
| cached_buffer->buffer = buffer; |
| cached_buffer->segment = selpad->segment; |
| return cached_buffer; |
| } |
| |
| static void |
| gst_selector_pad_free_cached_buffer (GstSelectorPadCachedBuffer * cached_buffer) |
| { |
| if (cached_buffer->buffer) |
| gst_buffer_unref (cached_buffer->buffer); |
| g_slice_free (GstSelectorPadCachedBuffer, cached_buffer); |
| } |
| |
| /* must be called with the SELECTOR_LOCK */ |
| static void |
| gst_selector_pad_cache_buffer (GstSelectorPad * selpad, GstBuffer * buffer) |
| { |
| if (selpad->segment.format != GST_FORMAT_TIME) { |
| GST_DEBUG_OBJECT (selpad, "Buffer %p with segment not in time format, " |
| "not caching", buffer); |
| gst_buffer_unref (buffer); |
| return; |
| } |
| |
| GST_DEBUG_OBJECT (selpad, "Caching buffer %p", buffer); |
| if (!selpad->cached_buffers) |
| selpad->cached_buffers = g_queue_new (); |
| g_queue_push_tail (selpad->cached_buffers, |
| gst_selector_pad_new_cached_buffer (selpad, buffer)); |
| } |
| |
| /* must be called with the SELECTOR_LOCK */ |
| static void |
| gst_selector_pad_free_cached_buffers (GstSelectorPad * selpad) |
| { |
| if (!selpad->cached_buffers) |
| return; |
| |
| GST_DEBUG_OBJECT (selpad, "Freeing cached buffers"); |
| g_queue_free_full (selpad->cached_buffers, |
| (GDestroyNotify) gst_selector_pad_free_cached_buffer); |
| selpad->cached_buffers = NULL; |
| } |
| |
| /* strictly get the linked pad from the sinkpad. If the pad is active we return |
| * the srcpad else we return NULL */ |
| static GstIterator * |
| gst_selector_pad_iterate_linked_pads (GstPad * pad, GstObject * parent) |
| { |
| GstInputSelector *sel; |
| GstPad *otherpad; |
| GstIterator *it = NULL; |
| GValue val = { 0, }; |
| |
| sel = GST_INPUT_SELECTOR (parent); |
| |
| otherpad = gst_input_selector_get_linked_pad (sel, pad, TRUE); |
| if (otherpad) { |
| g_value_init (&val, GST_TYPE_PAD); |
| g_value_set_object (&val, otherpad); |
| it = gst_iterator_new_single (GST_TYPE_PAD, &val); |
| g_value_unset (&val); |
| gst_object_unref (otherpad); |
| } |
| |
| return it; |
| } |
| |
| static gboolean |
| forward_sticky_events (GstPad * sinkpad, GstEvent ** event, gpointer user_data) |
| { |
| GstInputSelector *sel = GST_INPUT_SELECTOR (user_data); |
| |
| GST_DEBUG_OBJECT (sinkpad, "forward sticky event %" GST_PTR_FORMAT, *event); |
| |
| if (GST_EVENT_TYPE (*event) == GST_EVENT_SEGMENT) { |
| GstSegment *seg = &GST_SELECTOR_PAD (sinkpad)->segment; |
| GstEvent *e; |
| |
| e = gst_event_new_segment (seg); |
| gst_event_set_seqnum (e, GST_SELECTOR_PAD_CAST (sinkpad)->segment_seqnum); |
| |
| gst_pad_push_event (sel->srcpad, e); |
| } else if (GST_EVENT_TYPE (*event) == GST_EVENT_STREAM_START |
| && !sel->have_group_id) { |
| GstEvent *tmp = |
| gst_pad_get_sticky_event (sel->srcpad, GST_EVENT_STREAM_START, 0); |
| |
| /* Only push stream-start once if not all our streams have a stream-id */ |
| if (!tmp) { |
| gst_pad_push_event (sel->srcpad, gst_event_ref (*event)); |
| } else { |
| gst_event_unref (tmp); |
| } |
| } else { |
| gst_pad_push_event (sel->srcpad, gst_event_ref (*event)); |
| } |
| |
| return TRUE; |
| } |
| |
| static gboolean |
| gst_input_selector_eos_wait (GstInputSelector * self, GstSelectorPad * pad, |
| GstEvent * eos_event) |
| { |
| while (!self->eos && !self->flushing && !pad->flushing) { |
| GstPad *active_sinkpad; |
| active_sinkpad = gst_input_selector_get_active_sinkpad (self); |
| if (pad == GST_SELECTOR_PAD_CAST (active_sinkpad) && pad->eos |
| && !pad->eos_sent) { |
| GST_DEBUG_OBJECT (pad, "send EOS event"); |
| GST_INPUT_SELECTOR_UNLOCK (self); |
| /* if we have a pending events, push them now */ |
| if (pad->events_pending) { |
| gst_pad_sticky_events_foreach (GST_PAD_CAST (pad), |
| forward_sticky_events, self); |
| pad->events_pending = FALSE; |
| } |
| |
| gst_pad_push_event (self->srcpad, gst_event_ref (eos_event)); |
| GST_INPUT_SELECTOR_LOCK (self); |
| pad->eos_sent = TRUE; |
| } else { |
| /* we can be unlocked here when we are shutting down (flushing) or when we |
| * get unblocked */ |
| GST_INPUT_SELECTOR_WAIT (self); |
| } |
| } |
| |
| return self->flushing; |
| } |
| |
| static gboolean |
| gst_input_selector_all_eos (GstInputSelector * sel) |
| { |
| GList *walk; |
| |
| for (walk = GST_ELEMENT_CAST (sel)->sinkpads; walk; walk = walk->next) { |
| GstSelectorPad *selpad; |
| |
| selpad = GST_SELECTOR_PAD_CAST (walk->data); |
| if (!selpad->eos) { |
| return FALSE; |
| } |
| |
| } |
| |
| return TRUE; |
| } |
| |
| static gboolean |
| gst_selector_pad_event (GstPad * pad, GstObject * parent, GstEvent * event) |
| { |
| gboolean res = TRUE; |
| gboolean forward; |
| gboolean new_tags = FALSE; |
| GstInputSelector *sel; |
| GstSelectorPad *selpad; |
| GstPad *prev_active_sinkpad; |
| GstPad *active_sinkpad; |
| |
| sel = GST_INPUT_SELECTOR (parent); |
| selpad = GST_SELECTOR_PAD_CAST (pad); |
| GST_DEBUG_OBJECT (selpad, "received event %" GST_PTR_FORMAT, event); |
| |
| GST_INPUT_SELECTOR_LOCK (sel); |
| prev_active_sinkpad = |
| sel->active_sinkpad ? gst_object_ref (sel->active_sinkpad) : NULL; |
| active_sinkpad = gst_input_selector_get_active_sinkpad (sel); |
| gst_object_ref (active_sinkpad); |
| GST_INPUT_SELECTOR_UNLOCK (sel); |
| |
| if (prev_active_sinkpad != active_sinkpad) { |
| if (prev_active_sinkpad) |
| g_object_notify (G_OBJECT (prev_active_sinkpad), "active"); |
| g_object_notify (G_OBJECT (active_sinkpad), "active"); |
| g_object_notify (G_OBJECT (sel), "active-pad"); |
| } |
| if (prev_active_sinkpad) |
| gst_object_unref (prev_active_sinkpad); |
| gst_object_unref (active_sinkpad); |
| |
| GST_INPUT_SELECTOR_LOCK (sel); |
| active_sinkpad = gst_input_selector_get_active_sinkpad (sel); |
| |
| /* only forward if we are dealing with the active sinkpad */ |
| forward = (pad == active_sinkpad); |
| |
| switch (GST_EVENT_TYPE (event)) { |
| case GST_EVENT_STREAM_START:{ |
| guint group_id; |
| |
| if (!gst_event_parse_group_id (event, &group_id)) |
| sel->have_group_id = FALSE; |
| break; |
| } |
| case GST_EVENT_FLUSH_START: |
| /* Unblock the pad if it's waiting */ |
| selpad->flushing = TRUE; |
| sel->eos = FALSE; |
| GST_INPUT_SELECTOR_BROADCAST (sel); |
| break; |
| case GST_EVENT_FLUSH_STOP: |
| gst_selector_pad_reset (selpad); |
| break; |
| case GST_EVENT_SEGMENT: |
| { |
| gst_event_copy_segment (event, &selpad->segment); |
| selpad->segment_seqnum = gst_event_get_seqnum (event); |
| |
| GST_DEBUG_OBJECT (pad, "configured SEGMENT %" GST_SEGMENT_FORMAT, |
| &selpad->segment); |
| break; |
| } |
| case GST_EVENT_TAG: |
| { |
| GstTagList *tags, *oldtags, *newtags; |
| |
| gst_event_parse_tag (event, &tags); |
| |
| GST_OBJECT_LOCK (selpad); |
| oldtags = selpad->tags; |
| |
| newtags = gst_tag_list_merge (oldtags, tags, GST_TAG_MERGE_REPLACE); |
| selpad->tags = newtags; |
| GST_OBJECT_UNLOCK (selpad); |
| |
| if (oldtags) |
| gst_tag_list_unref (oldtags); |
| GST_DEBUG_OBJECT (pad, "received tags %" GST_PTR_FORMAT, newtags); |
| |
| new_tags = TRUE; |
| break; |
| } |
| case GST_EVENT_EOS: |
| selpad->eos = TRUE; |
| GST_DEBUG_OBJECT (pad, "received EOS"); |
| if (gst_input_selector_all_eos (sel)) { |
| GST_DEBUG_OBJECT (pad, "All sink pad received EOS"); |
| sel->eos = TRUE; |
| GST_INPUT_SELECTOR_BROADCAST (sel); |
| } else { |
| gst_input_selector_eos_wait (sel, selpad, event); |
| forward = FALSE; |
| } |
| break; |
| case GST_EVENT_GAP:{ |
| GstClockTime ts, dur; |
| |
| GST_DEBUG_OBJECT (pad, "Received gap event: %" GST_PTR_FORMAT, event); |
| |
| gst_event_parse_gap (event, &ts, &dur); |
| if (GST_CLOCK_TIME_IS_VALID (ts)) { |
| if (GST_CLOCK_TIME_IS_VALID (dur)) |
| ts += dur; |
| |
| /* update the segment position */ |
| GST_OBJECT_LOCK (pad); |
| selpad->segment.position = ts; |
| GST_OBJECT_UNLOCK (pad); |
| if (sel->sync_streams && active_sinkpad == pad) |
| GST_INPUT_SELECTOR_BROADCAST (sel); |
| } |
| |
| } |
| break; |
| default: |
| break; |
| } |
| GST_INPUT_SELECTOR_UNLOCK (sel); |
| if (new_tags) |
| g_object_notify (G_OBJECT (selpad), "tags"); |
| if (forward) { |
| GST_DEBUG_OBJECT (pad, "forwarding event"); |
| res = gst_pad_push_event (sel->srcpad, event); |
| } else { |
| /* If we aren't forwarding the event because the pad is not the |
| * active_sinkpad, then set the flag on the pad |
| * that says a segment needs sending if/when that pad is activated. |
| * For all other cases, we send the event immediately, which makes |
| * sparse streams and other segment updates work correctly downstream. |
| */ |
| if (GST_EVENT_IS_STICKY (event)) |
| selpad->events_pending = TRUE; |
| gst_event_unref (event); |
| } |
| |
| return res; |
| } |
| |
| static gboolean |
| gst_selector_pad_query (GstPad * pad, GstObject * parent, GstQuery * query) |
| { |
| gboolean res = FALSE; |
| GstInputSelector *self = (GstInputSelector *) parent; |
| |
| switch (GST_QUERY_TYPE (query)) { |
| case GST_QUERY_CAPS: |
| /* always proxy caps query, regardless of active pad or not */ |
| res = gst_pad_peer_query (self->srcpad, query); |
| break; |
| case GST_QUERY_ALLOCATION:{ |
| GstPad *active_sinkpad; |
| GstInputSelector *sel = GST_INPUT_SELECTOR (parent); |
| |
| /* Only do the allocation query for the active sinkpad, |
| * after switching a reconfigure event is sent and upstream |
| * should reconfigure and do a new allocation query |
| */ |
| if (GST_PAD_DIRECTION (pad) == GST_PAD_SINK) { |
| GST_INPUT_SELECTOR_LOCK (sel); |
| active_sinkpad = gst_input_selector_get_active_sinkpad (sel); |
| GST_INPUT_SELECTOR_UNLOCK (sel); |
| |
| if (pad != active_sinkpad) { |
| res = FALSE; |
| goto done; |
| } |
| } |
| } |
| /* fall through */ |
| default: |
| res = gst_pad_query_default (pad, parent, query); |
| break; |
| } |
| |
| done: |
| return res; |
| } |
| |
| static GstClockTime |
| gst_input_selector_get_clipped_running_time (GstSegment * seg, GstBuffer * buf) |
| { |
| GstClockTime running_time; |
| |
| running_time = GST_BUFFER_PTS (buf); |
| /* If possible try to get the running time at the end of the buffer */ |
| if (GST_BUFFER_DURATION_IS_VALID (buf)) |
| running_time += GST_BUFFER_DURATION (buf); |
| /* Only use the segment to convert to running time if the segment is |
| * in TIME format, otherwise do our best to try to sync */ |
| if (GST_CLOCK_TIME_IS_VALID (seg->stop)) { |
| if (running_time > seg->stop) { |
| running_time = seg->stop; |
| } |
| } |
| return gst_segment_to_running_time (seg, GST_FORMAT_TIME, running_time); |
| } |
| |
| /* must be called without the SELECTOR_LOCK, will wait until the running time |
| * of the active pad is after this pad or return TRUE when flushing */ |
| static gboolean |
| gst_input_selector_wait_running_time (GstInputSelector * sel, |
| GstSelectorPad * selpad, GstBuffer * buf) |
| { |
| GstSegment *seg; |
| |
| GST_DEBUG_OBJECT (selpad, "entering wait for buffer %p", buf); |
| |
| /* If we have no valid timestamp we can't sync this buffer */ |
| if (!GST_BUFFER_PTS_IS_VALID (buf)) { |
| GST_DEBUG_OBJECT (selpad, "leaving wait for buffer with " |
| "invalid timestamp"); |
| return FALSE; |
| } |
| |
| seg = &selpad->segment; |
| |
| /* Wait until |
| * a) this is the active pad |
| * b) the pad or the selector is flushing |
| * c) the buffer running time is before the current running time |
| * (either active-seg or clock, depending on sync-mode) |
| */ |
| |
| GST_INPUT_SELECTOR_LOCK (sel); |
| while (TRUE) { |
| GstPad *active_sinkpad; |
| GstSelectorPad *active_selpad; |
| GstClock *clock; |
| gint64 cur_running_time; |
| GstClockTime running_time; |
| |
| active_sinkpad = gst_input_selector_get_active_sinkpad (sel); |
| active_selpad = GST_SELECTOR_PAD_CAST (active_sinkpad); |
| |
| if (seg->format != GST_FORMAT_TIME) { |
| GST_DEBUG_OBJECT (selpad, |
| "Not waiting because we don't have a TIME segment"); |
| GST_INPUT_SELECTOR_UNLOCK (sel); |
| return FALSE; |
| } |
| |
| running_time = gst_input_selector_get_clipped_running_time (seg, buf); |
| /* If this is outside the segment don't sync */ |
| if (running_time == -1) { |
| GST_DEBUG_OBJECT (selpad, |
| "Not waiting because buffer is outside segment"); |
| GST_INPUT_SELECTOR_UNLOCK (sel); |
| return FALSE; |
| } |
| |
| cur_running_time = GST_CLOCK_TIME_NONE; |
| if (sel->sync_mode == GST_INPUT_SELECTOR_SYNC_MODE_CLOCK) { |
| clock = gst_element_get_clock (GST_ELEMENT_CAST (sel)); |
| if (clock) { |
| GstClockTime base_time; |
| |
| cur_running_time = gst_clock_get_time (clock); |
| base_time = gst_element_get_base_time (GST_ELEMENT_CAST (sel)); |
| if (base_time <= cur_running_time) |
| cur_running_time -= base_time; |
| else |
| cur_running_time = 0; |
| |
| gst_object_unref (clock); |
| } |
| } else { |
| GstSegment *active_seg; |
| |
| active_seg = &active_selpad->segment; |
| |
| /* If the active segment is configured but not to time format |
| * we can't do any syncing at all */ |
| if ((active_seg->format != GST_FORMAT_TIME |
| && active_seg->format != GST_FORMAT_UNDEFINED)) { |
| GST_DEBUG_OBJECT (selpad, |
| "Not waiting because active segment isn't in TIME format"); |
| GST_INPUT_SELECTOR_UNLOCK (sel); |
| return FALSE; |
| } |
| |
| /* Get active pad's running time, if no configured segment yet keep at -1 */ |
| if (active_seg->format == GST_FORMAT_TIME) |
| cur_running_time = gst_segment_to_running_time (active_seg, |
| GST_FORMAT_TIME, active_seg->position); |
| } |
| |
| if (selpad != active_selpad && !sel->eos && !sel->flushing |
| && !selpad->flushing && (cur_running_time == GST_CLOCK_TIME_NONE |
| || running_time >= cur_running_time)) { |
| GST_DEBUG_OBJECT (selpad, |
| "Waiting for active streams to advance. %" GST_TIME_FORMAT " >= %" |
| GST_TIME_FORMAT, GST_TIME_ARGS (running_time), |
| GST_TIME_ARGS (cur_running_time)); |
| GST_INPUT_SELECTOR_WAIT (sel); |
| } else { |
| GST_INPUT_SELECTOR_UNLOCK (sel); |
| break; |
| } |
| } |
| |
| /* Return TRUE if the selector or the pad is flushing */ |
| return (sel->flushing || selpad->flushing); |
| } |
| |
| #if DEBUG_CACHED_BUFFERS |
| static void |
| gst_input_selector_debug_cached_buffers (GstInputSelector * sel) |
| { |
| GList *walk; |
| |
| if (gst_debug_category_get_threshold (input_selector_debug) < GST_LEVEL_DEBUG) |
| return; |
| |
| for (walk = GST_ELEMENT_CAST (sel)->sinkpads; walk; walk = walk->next) { |
| GstSelectorPad *selpad; |
| GString *timestamps; |
| GList *l; |
| |
| selpad = GST_SELECTOR_PAD_CAST (walk->data); |
| if (!selpad->cached_buffers) { |
| GST_DEBUG_OBJECT (selpad, "Cached buffers timestamps: <none>"); |
| continue; |
| } |
| |
| timestamps = g_string_new ("Cached buffers timestamps:"); |
| for (l = selpad->cached_buffers->head; l != NULL; l = l->next) { |
| GstSelectorPadCachedBuffer *cached_buffer = l->data; |
| |
| g_string_append_printf (timestamps, " %" GST_TIME_FORMAT, |
| GST_TIME_ARGS (GST_BUFFER_PTS (cached_buffer->buffer))); |
| } |
| GST_DEBUG_OBJECT (selpad, "%s", timestamps->str); |
| g_string_free (timestamps, TRUE); |
| } |
| } |
| #endif |
| |
| /* must be called with the SELECTOR_LOCK */ |
| static void |
| gst_input_selector_cleanup_old_cached_buffers (GstInputSelector * sel, |
| GstPad * pad) |
| { |
| GstClock *clock; |
| gint64 cur_running_time; |
| GList *walk; |
| |
| cur_running_time = GST_CLOCK_TIME_NONE; |
| if (sel->sync_mode == GST_INPUT_SELECTOR_SYNC_MODE_CLOCK) { |
| clock = gst_element_get_clock (GST_ELEMENT_CAST (sel)); |
| if (clock) { |
| GstClockTime base_time; |
| |
| cur_running_time = gst_clock_get_time (clock); |
| base_time = gst_element_get_base_time (GST_ELEMENT_CAST (sel)); |
| if (base_time <= cur_running_time) |
| cur_running_time -= base_time; |
| else |
| cur_running_time = 0; |
| |
| gst_object_unref (clock); |
| } |
| } else { |
| GstPad *active_sinkpad; |
| GstSelectorPad *active_selpad; |
| GstSegment *active_seg; |
| |
| active_sinkpad = gst_input_selector_get_active_sinkpad (sel); |
| active_selpad = GST_SELECTOR_PAD_CAST (active_sinkpad); |
| active_seg = &active_selpad->segment; |
| |
| /* Get active pad's running time, if no configured segment yet keep at -1 */ |
| if (active_seg->format == GST_FORMAT_TIME) |
| cur_running_time = gst_segment_to_running_time (active_seg, |
| GST_FORMAT_TIME, active_seg->position); |
| } |
| |
| if (!GST_CLOCK_TIME_IS_VALID (cur_running_time)) |
| return; |
| |
| GST_DEBUG_OBJECT (sel, "Cleaning up old cached buffers"); |
| for (walk = GST_ELEMENT_CAST (sel)->sinkpads; walk; walk = g_list_next (walk)) { |
| GstSelectorPad *selpad; |
| GstSegment *seg; |
| GstSelectorPadCachedBuffer *cached_buffer; |
| GSList *maybe_remove; |
| guint queue_position; |
| |
| selpad = GST_SELECTOR_PAD_CAST (walk->data); |
| if (!selpad->cached_buffers) |
| continue; |
| |
| seg = &selpad->segment; |
| |
| maybe_remove = NULL; |
| queue_position = 0; |
| while ((cached_buffer = g_queue_peek_nth (selpad->cached_buffers, |
| queue_position))) { |
| GstBuffer *buffer = cached_buffer->buffer; |
| GstClockTime running_time; |
| GSList *l; |
| |
| /* If we have no valid timestamp we can't sync this buffer */ |
| if (!GST_BUFFER_PTS_IS_VALID (buffer)) { |
| maybe_remove = g_slist_append (maybe_remove, cached_buffer); |
| queue_position = g_slist_length (maybe_remove); |
| continue; |
| } |
| |
| /* the buffer is still valid if its duration is valid and the |
| * timestamp + duration is >= time, or if its duration is invalid |
| * and the timestamp is >= time */ |
| running_time = gst_input_selector_get_clipped_running_time (seg, buffer); |
| GST_DEBUG_OBJECT (selpad, |
| "checking if buffer %p running time=%" GST_TIME_FORMAT |
| " >= stream time=%" GST_TIME_FORMAT, buffer, |
| GST_TIME_ARGS (running_time), GST_TIME_ARGS (cur_running_time)); |
| if (running_time >= cur_running_time) { |
| break; |
| } |
| |
| GST_DEBUG_OBJECT (selpad, "Removing old cached buffer %p", buffer); |
| g_queue_pop_nth (selpad->cached_buffers, queue_position); |
| gst_selector_pad_free_cached_buffer (cached_buffer); |
| |
| for (l = maybe_remove; l != NULL; l = g_slist_next (l)) { |
| /* A buffer after some invalid buffers was removed, it means the invalid buffers |
| * are old, lets also remove them */ |
| cached_buffer = l->data; |
| g_queue_remove (selpad->cached_buffers, cached_buffer); |
| gst_selector_pad_free_cached_buffer (cached_buffer); |
| } |
| |
| g_slist_free (maybe_remove); |
| maybe_remove = NULL; |
| queue_position = 0; |
| } |
| |
| g_slist_free (maybe_remove); |
| maybe_remove = NULL; |
| |
| if (g_queue_is_empty (selpad->cached_buffers)) { |
| g_queue_free (selpad->cached_buffers); |
| selpad->cached_buffers = NULL; |
| } |
| } |
| |
| #if DEBUG_CACHED_BUFFERS |
| gst_input_selector_debug_cached_buffers (sel); |
| #endif |
| } |
| |
| static GstFlowReturn |
| gst_selector_pad_chain (GstPad * pad, GstObject * parent, GstBuffer * buf) |
| { |
| GstInputSelector *sel; |
| GstFlowReturn res; |
| GstPad *active_sinkpad; |
| GstPad *prev_active_sinkpad = NULL; |
| GstSelectorPad *selpad; |
| |
| sel = GST_INPUT_SELECTOR (parent); |
| selpad = GST_SELECTOR_PAD_CAST (pad); |
| |
| GST_DEBUG_OBJECT (selpad, |
| "entering chain for buf %p with timestamp %" GST_TIME_FORMAT, buf, |
| GST_TIME_ARGS (GST_BUFFER_PTS (buf))); |
| |
| GST_INPUT_SELECTOR_LOCK (sel); |
| |
| if (sel->flushing) { |
| GST_INPUT_SELECTOR_UNLOCK (sel); |
| goto flushing; |
| } |
| |
| GST_LOG_OBJECT (pad, "getting active pad"); |
| |
| prev_active_sinkpad = |
| sel->active_sinkpad ? gst_object_ref (sel->active_sinkpad) : NULL; |
| active_sinkpad = gst_input_selector_get_active_sinkpad (sel); |
| |
| /* In sync mode wait until the active pad has advanced |
| * after the running time of the current buffer */ |
| if (sel->sync_streams) { |
| /* call chain for each cached buffer if we are not the active pad |
| * or if we are the active pad but didn't push anything yet. */ |
| if (active_sinkpad != pad || !selpad->pushed) { |
| /* no need to check for sel->cache_buffers as selpad->cached_buffers |
| * will only be valid if cache_buffers is TRUE */ |
| if (selpad->cached_buffers && !selpad->sending_cached_buffers) { |
| GstSelectorPadCachedBuffer *cached_buffer; |
| GstSegment saved_segment; |
| |
| saved_segment = selpad->segment; |
| |
| selpad->sending_cached_buffers = TRUE; |
| while (!sel->eos && !sel->flushing && !selpad->flushing && |
| (cached_buffer = g_queue_pop_head (selpad->cached_buffers))) { |
| GST_DEBUG_OBJECT (pad, "Cached buffers found, " |
| "invoking chain for cached buffer %p", cached_buffer->buffer); |
| |
| selpad->segment = cached_buffer->segment; |
| selpad->events_pending = TRUE; |
| GST_INPUT_SELECTOR_UNLOCK (sel); |
| gst_selector_pad_chain (pad, parent, cached_buffer->buffer); |
| GST_INPUT_SELECTOR_LOCK (sel); |
| |
| /* We just passed the ownership of the buffer to the chain function */ |
| cached_buffer->buffer = NULL; |
| gst_selector_pad_free_cached_buffer (cached_buffer); |
| |
| /* we may have cleaned up the queue in the meantime because of |
| * old buffers */ |
| if (!selpad->cached_buffers) { |
| break; |
| } |
| } |
| selpad->sending_cached_buffers = FALSE; |
| |
| /* all cached buffers sent, restore segment for current buffer */ |
| selpad->segment = saved_segment; |
| selpad->events_pending = TRUE; |
| |
| /* Might have changed while calling chain for cached buffers */ |
| active_sinkpad = gst_input_selector_get_active_sinkpad (sel); |
| } |
| } |
| |
| if (active_sinkpad != pad) { |
| GST_INPUT_SELECTOR_UNLOCK (sel); |
| if (gst_input_selector_wait_running_time (sel, selpad, buf)) |
| goto flushing; |
| GST_INPUT_SELECTOR_LOCK (sel); |
| } |
| |
| /* Might have changed while waiting */ |
| active_sinkpad = gst_input_selector_get_active_sinkpad (sel); |
| } |
| |
| /* update the segment on the srcpad */ |
| if (GST_BUFFER_PTS_IS_VALID (buf)) { |
| GstClockTime start_time = GST_BUFFER_PTS (buf); |
| |
| GST_LOG_OBJECT (pad, "received start time %" GST_TIME_FORMAT, |
| GST_TIME_ARGS (start_time)); |
| if (GST_BUFFER_DURATION_IS_VALID (buf)) |
| GST_LOG_OBJECT (pad, "received end time %" GST_TIME_FORMAT, |
| GST_TIME_ARGS (start_time + GST_BUFFER_DURATION (buf))); |
| |
| GST_OBJECT_LOCK (pad); |
| selpad->segment.position = start_time; |
| GST_OBJECT_UNLOCK (pad); |
| } |
| |
| /* Ignore buffers from pads except the selected one */ |
| if (pad != active_sinkpad) |
| goto ignore; |
| |
| /* Tell all non-active pads that we advanced the running time */ |
| if (sel->sync_streams) |
| GST_INPUT_SELECTOR_BROADCAST (sel); |
| |
| GST_INPUT_SELECTOR_UNLOCK (sel); |
| |
| if (prev_active_sinkpad != active_sinkpad) { |
| if (prev_active_sinkpad) |
| g_object_notify (G_OBJECT (prev_active_sinkpad), "active"); |
| g_object_notify (G_OBJECT (active_sinkpad), "active"); |
| g_object_notify (G_OBJECT (sel), "active-pad"); |
| } |
| |
| /* if we have a pending events, push them now */ |
| if (G_UNLIKELY (prev_active_sinkpad != active_sinkpad |
| || selpad->events_pending)) { |
| gst_pad_sticky_events_foreach (GST_PAD_CAST (selpad), forward_sticky_events, |
| sel); |
| selpad->events_pending = FALSE; |
| } |
| |
| if (prev_active_sinkpad) { |
| gst_object_unref (prev_active_sinkpad); |
| prev_active_sinkpad = NULL; |
| } |
| |
| if (selpad->discont) { |
| buf = gst_buffer_make_writable (buf); |
| |
| GST_DEBUG_OBJECT (pad, "Marking discont buffer %p", buf); |
| GST_BUFFER_FLAG_SET (buf, GST_BUFFER_FLAG_DISCONT); |
| selpad->discont = FALSE; |
| } |
| |
| /* forward */ |
| GST_LOG_OBJECT (pad, "Forwarding buffer %p with timestamp %" GST_TIME_FORMAT, |
| buf, GST_TIME_ARGS (GST_BUFFER_PTS (buf))); |
| |
| /* Only make the buffer read-only when necessary */ |
| if (sel->sync_streams && sel->cache_buffers) |
| buf = gst_buffer_ref (buf); |
| res = gst_pad_push (sel->srcpad, buf); |
| GST_LOG_OBJECT (pad, "Buffer %p forwarded result=%d", buf, res); |
| |
| GST_INPUT_SELECTOR_LOCK (sel); |
| |
| if (sel->sync_streams && sel->cache_buffers) { |
| /* Might have changed while pushing */ |
| active_sinkpad = gst_input_selector_get_active_sinkpad (sel); |
| /* only set pad to pushed if we are still the active pad */ |
| if (active_sinkpad == pad) |
| selpad->pushed = TRUE; |
| |
| /* cache buffer as we may need it again if we change pads */ |
| gst_selector_pad_cache_buffer (selpad, buf); |
| gst_input_selector_cleanup_old_cached_buffers (sel, pad); |
| } else { |
| selpad->pushed = TRUE; |
| } |
| GST_INPUT_SELECTOR_UNLOCK (sel); |
| |
| done: |
| |
| if (prev_active_sinkpad) |
| gst_object_unref (prev_active_sinkpad); |
| prev_active_sinkpad = NULL; |
| |
| return res; |
| |
| /* dropped buffers */ |
| ignore: |
| { |
| gboolean active_pad_pushed = GST_SELECTOR_PAD_CAST (active_sinkpad)->pushed; |
| |
| GST_DEBUG_OBJECT (pad, "Pad not active, discard buffer %p", buf); |
| /* when we drop a buffer, we're creating a discont on this pad */ |
| selpad->discont = TRUE; |
| GST_INPUT_SELECTOR_UNLOCK (sel); |
| gst_buffer_unref (buf); |
| |
| /* figure out what to return upstream */ |
| GST_OBJECT_LOCK (selpad); |
| if (selpad->always_ok || !active_pad_pushed) |
| res = GST_FLOW_OK; |
| else |
| res = GST_FLOW_NOT_LINKED; |
| GST_OBJECT_UNLOCK (selpad); |
| |
| goto done; |
| } |
| flushing: |
| { |
| GST_DEBUG_OBJECT (pad, "We are flushing, discard buffer %p", buf); |
| gst_buffer_unref (buf); |
| res = GST_FLOW_FLUSHING; |
| goto done; |
| } |
| } |
| |
| static void gst_input_selector_dispose (GObject * object); |
| static void gst_input_selector_finalize (GObject * object); |
| |
| static void gst_input_selector_set_property (GObject * object, |
| guint prop_id, const GValue * value, GParamSpec * pspec); |
| static void gst_input_selector_get_property (GObject * object, |
| guint prop_id, GValue * value, GParamSpec * pspec); |
| |
| static GstPad *gst_input_selector_request_new_pad (GstElement * element, |
| GstPadTemplate * templ, const gchar * unused, const GstCaps * caps); |
| static void gst_input_selector_release_pad (GstElement * element, GstPad * pad); |
| |
| static GstStateChangeReturn gst_input_selector_change_state (GstElement * |
| element, GstStateChange transition); |
| |
| static gboolean gst_input_selector_event (GstPad * pad, GstObject * parent, |
| GstEvent * event); |
| |
| #define _do_init \ |
| GST_DEBUG_CATEGORY_INIT (input_selector_debug, \ |
| "input-selector", 0, "An input stream selector element"); |
| #define gst_input_selector_parent_class parent_class |
| G_DEFINE_TYPE_WITH_CODE (GstInputSelector, gst_input_selector, GST_TYPE_ELEMENT, |
| _do_init); |
| |
| static void |
| gst_input_selector_class_init (GstInputSelectorClass * klass) |
| { |
| GObjectClass *gobject_class = G_OBJECT_CLASS (klass); |
| GstElementClass *gstelement_class = GST_ELEMENT_CLASS (klass); |
| |
| gobject_class->dispose = gst_input_selector_dispose; |
| gobject_class->finalize = gst_input_selector_finalize; |
| |
| gobject_class->set_property = gst_input_selector_set_property; |
| gobject_class->get_property = gst_input_selector_get_property; |
| |
| g_object_class_install_property (gobject_class, PROP_N_PADS, |
| g_param_spec_uint ("n-pads", "Number of Pads", |
| "The number of sink pads", 0, G_MAXUINT, 0, |
| G_PARAM_READABLE | G_PARAM_STATIC_STRINGS)); |
| |
| g_object_class_install_property (gobject_class, PROP_ACTIVE_PAD, |
| g_param_spec_object ("active-pad", "Active pad", |
| "The currently active sink pad", GST_TYPE_PAD, |
| G_PARAM_READWRITE | GST_PARAM_MUTABLE_PLAYING | |
| G_PARAM_STATIC_STRINGS)); |
| |
| /** |
| * GstInputSelector:sync-streams |
| * |
| * If set to %TRUE all inactive streams will be synced to the |
| * running time of the active stream or to the current clock. |
| * |
| * To make sure no buffers are dropped by input-selector |
| * that might be needed when switching the active pad, |
| * sync-mode should be set to "clock" and cache-buffers to TRUE. |
| */ |
| g_object_class_install_property (gobject_class, PROP_SYNC_STREAMS, |
| g_param_spec_boolean ("sync-streams", "Sync Streams", |
| "Synchronize inactive streams to the running time of the active " |
| "stream or to the current clock", |
| DEFAULT_SYNC_STREAMS, |
| G_PARAM_READWRITE | G_PARAM_STATIC_STRINGS | |
| GST_PARAM_MUTABLE_READY)); |
| |
| /** |
| * GstInputSelector:sync-mode |
| * |
| * Select how input-selector will sync buffers when in sync-streams mode. |
| * |
| * Note that when using the "active-segment" mode, the "active-segment" may |
| * be ahead of current clock time when switching the active pad, as the current |
| * active pad may have pushed more buffers than what was displayed/consumed, |
| * which may cause delays and some missing buffers. |
| */ |
| g_object_class_install_property (gobject_class, PROP_SYNC_MODE, |
| g_param_spec_enum ("sync-mode", "Sync mode", |
| "Behavior in sync-streams mode", GST_TYPE_INPUT_SELECTOR_SYNC_MODE, |
| DEFAULT_SYNC_MODE, |
| G_PARAM_READWRITE | G_PARAM_STATIC_STRINGS | |
| GST_PARAM_MUTABLE_READY)); |
| |
| /** |
| * GstInputSelector:cache-buffers |
| * |
| * If set to %TRUE and GstInputSelector:sync-streams is also set to %TRUE, |
| * the active pad will cache the buffers still considered valid (after current |
| * running time, see sync-mode) to avoid missing frames if/when the pad is |
| * reactivated. |
| * |
| * The active pad may push more buffers than what is currently displayed/consumed |
| * and when changing pads those buffers will be discarded and the only way to |
| * reactivate that pad without loosing the already consumed buffers is to enable cache. |
| */ |
| g_object_class_install_property (gobject_class, PROP_CACHE_BUFFERS, |
| g_param_spec_boolean ("cache-buffers", "Cache Buffers", |
| "Cache buffers for active-pad", |
| DEFAULT_CACHE_BUFFERS, |
| G_PARAM_READWRITE | G_PARAM_STATIC_STRINGS | |
| GST_PARAM_MUTABLE_READY)); |
| |
| gst_element_class_set_static_metadata (gstelement_class, "Input selector", |
| "Generic", "N-to-1 input stream selector", |
| "Julien Moutte <julien@moutte.net>, " |
| "Jan Schmidt <thaytan@mad.scientist.com>, " |
| "Wim Taymans <wim.taymans@gmail.com>"); |
| gst_element_class_add_static_pad_template (gstelement_class, |
| &gst_input_selector_sink_factory); |
| gst_element_class_add_static_pad_template (gstelement_class, |
| &gst_input_selector_src_factory); |
| |
| gstelement_class->request_new_pad = gst_input_selector_request_new_pad; |
| gstelement_class->release_pad = gst_input_selector_release_pad; |
| gstelement_class->change_state = gst_input_selector_change_state; |
| } |
| |
| static void |
| gst_input_selector_init (GstInputSelector * sel) |
| { |
| sel->srcpad = gst_pad_new ("src", GST_PAD_SRC); |
| gst_pad_set_iterate_internal_links_function (sel->srcpad, |
| GST_DEBUG_FUNCPTR (gst_selector_pad_iterate_linked_pads)); |
| gst_pad_set_event_function (sel->srcpad, |
| GST_DEBUG_FUNCPTR (gst_input_selector_event)); |
| GST_OBJECT_FLAG_SET (sel->srcpad, GST_PAD_FLAG_PROXY_CAPS); |
| gst_element_add_pad (GST_ELEMENT (sel), sel->srcpad); |
| /* sinkpad management */ |
| sel->active_sinkpad = NULL; |
| sel->padcount = 0; |
| sel->sync_streams = DEFAULT_SYNC_STREAMS; |
| sel->sync_mode = DEFAULT_SYNC_MODE; |
| sel->have_group_id = TRUE; |
| |
| g_mutex_init (&sel->lock); |
| g_cond_init (&sel->cond); |
| sel->eos = FALSE; |
| |
| /* lets give a change for downstream to do something on |
| * active-pad change before we start pushing new buffers */ |
| g_signal_connect_data (sel, "notify::active-pad", |
| (GCallback) gst_input_selector_active_pad_changed, NULL, |
| NULL, G_CONNECT_AFTER); |
| } |
| |
| static void |
| gst_input_selector_dispose (GObject * object) |
| { |
| GstInputSelector *sel = GST_INPUT_SELECTOR (object); |
| |
| if (sel->active_sinkpad) { |
| gst_object_unref (sel->active_sinkpad); |
| sel->active_sinkpad = NULL; |
| } |
| G_OBJECT_CLASS (parent_class)->dispose (object); |
| } |
| |
| static void |
| gst_input_selector_finalize (GObject * object) |
| { |
| GstInputSelector *sel = GST_INPUT_SELECTOR (object); |
| |
| g_mutex_clear (&sel->lock); |
| g_cond_clear (&sel->cond); |
| |
| G_OBJECT_CLASS (parent_class)->finalize (object); |
| } |
| |
| /* this function must be called with the SELECTOR_LOCK. It returns TRUE when the |
| * active pad changed. */ |
| static gboolean |
| gst_input_selector_set_active_pad (GstInputSelector * self, GstPad * pad) |
| { |
| GstSelectorPad *old, *new; |
| GstPad **active_pad_p; |
| |
| if (pad == self->active_sinkpad) |
| return FALSE; |
| |
| old = GST_SELECTOR_PAD_CAST (self->active_sinkpad); |
| new = GST_SELECTOR_PAD_CAST (pad); |
| |
| GST_DEBUG_OBJECT (self, "setting active pad to %s:%s", |
| GST_DEBUG_PAD_NAME (new)); |
| |
| if (old) |
| old->pushed = FALSE; |
| if (new) |
| new->pushed = FALSE; |
| |
| /* Send a new SEGMENT event on the new pad next */ |
| if (old != new && new) |
| new->events_pending = TRUE; |
| |
| active_pad_p = &self->active_sinkpad; |
| gst_object_replace ((GstObject **) active_pad_p, GST_OBJECT_CAST (pad)); |
| |
| if (old && old != new) |
| gst_pad_push_event (GST_PAD_CAST (old), gst_event_new_reconfigure ()); |
| if (new) |
| gst_pad_push_event (GST_PAD_CAST (new), gst_event_new_reconfigure ()); |
| |
| GST_DEBUG_OBJECT (self, "New active pad is %" GST_PTR_FORMAT, |
| self->active_sinkpad); |
| |
| if (old != new && new && new->eos) { |
| new->eos_sent = FALSE; |
| GST_INPUT_SELECTOR_BROADCAST (self); |
| } |
| |
| return TRUE; |
| } |
| |
| static void |
| gst_input_selector_set_property (GObject * object, guint prop_id, |
| const GValue * value, GParamSpec * pspec) |
| { |
| GstInputSelector *sel = GST_INPUT_SELECTOR (object); |
| |
| switch (prop_id) { |
| case PROP_ACTIVE_PAD: |
| { |
| GstPad *pad; |
| |
| pad = g_value_get_object (value); |
| |
| GST_INPUT_SELECTOR_LOCK (sel); |
| |
| #if DEBUG_CACHED_BUFFERS |
| gst_input_selector_debug_cached_buffers (sel); |
| #endif |
| |
| gst_input_selector_set_active_pad (sel, pad); |
| |
| #if DEBUG_CACHED_BUFFERS |
| gst_input_selector_debug_cached_buffers (sel); |
| #endif |
| |
| GST_INPUT_SELECTOR_UNLOCK (sel); |
| break; |
| } |
| case PROP_SYNC_STREAMS: |
| GST_INPUT_SELECTOR_LOCK (sel); |
| sel->sync_streams = g_value_get_boolean (value); |
| GST_INPUT_SELECTOR_UNLOCK (sel); |
| break; |
| case PROP_SYNC_MODE: |
| GST_INPUT_SELECTOR_LOCK (sel); |
| sel->sync_mode = g_value_get_enum (value); |
| GST_INPUT_SELECTOR_UNLOCK (sel); |
| break; |
| case PROP_CACHE_BUFFERS: |
| GST_INPUT_SELECTOR_LOCK (object); |
| sel->cache_buffers = g_value_get_boolean (value); |
| GST_INPUT_SELECTOR_UNLOCK (object); |
| break; |
| default: |
| G_OBJECT_WARN_INVALID_PROPERTY_ID (object, prop_id, pspec); |
| break; |
| } |
| } |
| |
| static void |
| gst_input_selector_active_pad_changed (GstInputSelector * sel, |
| GParamSpec * pspec, gpointer user_data) |
| { |
| /* Wake up all non-active pads in sync mode, they might be |
| * the active pad now */ |
| if (sel->sync_streams) |
| GST_INPUT_SELECTOR_BROADCAST (sel); |
| } |
| |
| static void |
| gst_input_selector_get_property (GObject * object, guint prop_id, |
| GValue * value, GParamSpec * pspec) |
| { |
| GstInputSelector *sel = GST_INPUT_SELECTOR (object); |
| |
| switch (prop_id) { |
| case PROP_N_PADS: |
| GST_INPUT_SELECTOR_LOCK (object); |
| g_value_set_uint (value, sel->n_pads); |
| GST_INPUT_SELECTOR_UNLOCK (object); |
| break; |
| case PROP_ACTIVE_PAD: |
| GST_INPUT_SELECTOR_LOCK (object); |
| g_value_set_object (value, sel->active_sinkpad); |
| GST_INPUT_SELECTOR_UNLOCK (object); |
| break; |
| case PROP_SYNC_STREAMS: |
| GST_INPUT_SELECTOR_LOCK (object); |
| g_value_set_boolean (value, sel->sync_streams); |
| GST_INPUT_SELECTOR_UNLOCK (object); |
| break; |
| case PROP_SYNC_MODE: |
| GST_INPUT_SELECTOR_LOCK (object); |
| g_value_set_enum (value, sel->sync_mode); |
| GST_INPUT_SELECTOR_UNLOCK (object); |
| break; |
| case PROP_CACHE_BUFFERS: |
| GST_INPUT_SELECTOR_LOCK (object); |
| g_value_set_boolean (value, sel->cache_buffers); |
| GST_INPUT_SELECTOR_UNLOCK (object); |
| break; |
| default: |
| G_OBJECT_WARN_INVALID_PROPERTY_ID (object, prop_id, pspec); |
| break; |
| } |
| } |
| |
| static GstPad * |
| gst_input_selector_get_linked_pad (GstInputSelector * sel, GstPad * pad, |
| gboolean strict) |
| { |
| GstPad *otherpad = NULL; |
| |
| GST_INPUT_SELECTOR_LOCK (sel); |
| if (pad == sel->srcpad) |
| otherpad = sel->active_sinkpad; |
| else if (pad == sel->active_sinkpad || !strict) |
| otherpad = sel->srcpad; |
| if (otherpad) |
| gst_object_ref (otherpad); |
| GST_INPUT_SELECTOR_UNLOCK (sel); |
| |
| return otherpad; |
| } |
| |
| static gboolean |
| gst_input_selector_event (GstPad * pad, GstObject * parent, GstEvent * event) |
| { |
| GstInputSelector *sel; |
| gboolean result = FALSE; |
| GstIterator *iter; |
| gboolean done = FALSE; |
| GValue item = { 0, }; |
| GstPad *eventpad; |
| GList *pushed_pads = NULL; |
| |
| sel = GST_INPUT_SELECTOR (parent); |
| /* Send upstream events to all sinkpads */ |
| iter = gst_element_iterate_sink_pads (GST_ELEMENT_CAST (sel)); |
| |
| /* This is now essentially a copy of gst_pad_event_default_dispatch |
| * with a different iterator */ |
| while (!done) { |
| switch (gst_iterator_next (iter, &item)) { |
| case GST_ITERATOR_OK: |
| eventpad = g_value_get_object (&item); |
| |
| /* if already pushed, skip */ |
| if (g_list_find (pushed_pads, eventpad)) { |
| g_value_reset (&item); |
| break; |
| } |
| |
| gst_event_ref (event); |
| result |= gst_pad_push_event (eventpad, event); |
| |
| g_value_reset (&item); |
| break; |
| case GST_ITERATOR_RESYNC: |
| /* We don't reset the result here because we don't push the event |
| * again on pads that got the event already and because we need |
| * to consider the result of the previous pushes */ |
| gst_iterator_resync (iter); |
| break; |
| case GST_ITERATOR_ERROR: |
| GST_ERROR_OBJECT (pad, "Could not iterate over sinkpads"); |
| done = TRUE; |
| break; |
| case GST_ITERATOR_DONE: |
| done = TRUE; |
| break; |
| } |
| } |
| g_value_unset (&item); |
| gst_iterator_free (iter); |
| |
| g_list_free (pushed_pads); |
| |
| gst_event_unref (event); |
| |
| return result; |
| } |
| |
| /* check if the pad is the active sinkpad */ |
| static inline gboolean |
| gst_input_selector_is_active_sinkpad (GstInputSelector * sel, GstPad * pad) |
| { |
| gboolean res; |
| |
| GST_INPUT_SELECTOR_LOCK (sel); |
| res = (pad == sel->active_sinkpad); |
| GST_INPUT_SELECTOR_UNLOCK (sel); |
| |
| return res; |
| } |
| |
| /* Get or create the active sinkpad, must be called with SELECTOR_LOCK */ |
| static GstPad * |
| gst_input_selector_get_active_sinkpad (GstInputSelector * sel) |
| { |
| GstPad *active_sinkpad; |
| |
| active_sinkpad = sel->active_sinkpad; |
| if (active_sinkpad == NULL) { |
| GValue item = G_VALUE_INIT; |
| GstIterator *iter = gst_element_iterate_sink_pads (GST_ELEMENT_CAST (sel)); |
| GstIteratorResult ires; |
| |
| while ((ires = gst_iterator_next (iter, &item)) == GST_ITERATOR_RESYNC) |
| gst_iterator_resync (iter); |
| if (ires == GST_ITERATOR_OK) { |
| /* If no pad is currently selected, we return the first usable pad to |
| * guarantee consistency */ |
| |
| active_sinkpad = sel->active_sinkpad = g_value_dup_object (&item); |
| g_value_reset (&item); |
| GST_DEBUG_OBJECT (sel, "Activating pad %s:%s", |
| GST_DEBUG_PAD_NAME (active_sinkpad)); |
| } else |
| GST_WARNING_OBJECT (sel, "Couldn't find a default sink pad"); |
| gst_iterator_free (iter); |
| } |
| |
| return active_sinkpad; |
| } |
| |
| static GstPad * |
| gst_input_selector_request_new_pad (GstElement * element, |
| GstPadTemplate * templ, const gchar * unused, const GstCaps * caps) |
| { |
| GstInputSelector *sel; |
| gchar *name = NULL; |
| GstPad *sinkpad = NULL; |
| |
| g_return_val_if_fail (templ->direction == GST_PAD_SINK, NULL); |
| |
| sel = GST_INPUT_SELECTOR (element); |
| |
| GST_INPUT_SELECTOR_LOCK (sel); |
| |
| GST_LOG_OBJECT (sel, "Creating new pad sink_%u", sel->padcount); |
| name = g_strdup_printf ("sink_%u", sel->padcount++); |
| sinkpad = g_object_new (GST_TYPE_SELECTOR_PAD, |
| "name", name, "direction", templ->direction, "template", templ, NULL); |
| g_free (name); |
| |
| sel->n_pads++; |
| |
| gst_pad_set_event_function (sinkpad, |
| GST_DEBUG_FUNCPTR (gst_selector_pad_event)); |
| gst_pad_set_query_function (sinkpad, |
| GST_DEBUG_FUNCPTR (gst_selector_pad_query)); |
| gst_pad_set_chain_function (sinkpad, |
| GST_DEBUG_FUNCPTR (gst_selector_pad_chain)); |
| gst_pad_set_iterate_internal_links_function (sinkpad, |
| GST_DEBUG_FUNCPTR (gst_selector_pad_iterate_linked_pads)); |
| |
| GST_OBJECT_FLAG_SET (sinkpad, GST_PAD_FLAG_PROXY_CAPS); |
| GST_OBJECT_FLAG_SET (sinkpad, GST_PAD_FLAG_PROXY_ALLOCATION); |
| gst_pad_set_active (sinkpad, TRUE); |
| gst_element_add_pad (GST_ELEMENT (sel), sinkpad); |
| GST_INPUT_SELECTOR_UNLOCK (sel); |
| |
| return sinkpad; |
| } |
| |
| static void |
| gst_input_selector_release_pad (GstElement * element, GstPad * pad) |
| { |
| GstInputSelector *sel; |
| |
| sel = GST_INPUT_SELECTOR (element); |
| GST_LOG_OBJECT (sel, "Releasing pad %s:%s", GST_DEBUG_PAD_NAME (pad)); |
| |
| GST_INPUT_SELECTOR_LOCK (sel); |
| /* if the pad was the active pad, makes us select a new one */ |
| if (sel->active_sinkpad == pad) { |
| GST_DEBUG_OBJECT (sel, "Deactivating pad %s:%s", GST_DEBUG_PAD_NAME (pad)); |
| gst_object_unref (sel->active_sinkpad); |
| sel->active_sinkpad = NULL; |
| } |
| sel->n_pads--; |
| GST_INPUT_SELECTOR_UNLOCK (sel); |
| |
| gst_pad_set_active (pad, FALSE); |
| gst_element_remove_pad (GST_ELEMENT (sel), pad); |
| } |
| |
| static void |
| gst_input_selector_reset (GstInputSelector * sel) |
| { |
| GList *walk; |
| |
| GST_INPUT_SELECTOR_LOCK (sel); |
| /* clear active pad */ |
| if (sel->active_sinkpad) { |
| gst_object_unref (sel->active_sinkpad); |
| sel->active_sinkpad = NULL; |
| } |
| sel->eos_sent = FALSE; |
| |
| /* reset each of our sinkpads state */ |
| for (walk = GST_ELEMENT_CAST (sel)->sinkpads; walk; walk = g_list_next (walk)) { |
| GstSelectorPad *selpad = GST_SELECTOR_PAD_CAST (walk->data); |
| |
| gst_selector_pad_reset (selpad); |
| |
| if (selpad->tags) { |
| gst_tag_list_unref (selpad->tags); |
| selpad->tags = NULL; |
| } |
| } |
| sel->have_group_id = TRUE; |
| GST_INPUT_SELECTOR_UNLOCK (sel); |
| } |
| |
| static GstStateChangeReturn |
| gst_input_selector_change_state (GstElement * element, |
| GstStateChange transition) |
| { |
| GstInputSelector *self = GST_INPUT_SELECTOR (element); |
| GstStateChangeReturn result; |
| |
| switch (transition) { |
| case GST_STATE_CHANGE_READY_TO_PAUSED: |
| GST_INPUT_SELECTOR_LOCK (self); |
| self->eos = FALSE; |
| self->flushing = FALSE; |
| GST_INPUT_SELECTOR_UNLOCK (self); |
| break; |
| case GST_STATE_CHANGE_PAUSED_TO_READY: |
| /* first unlock before we call the parent state change function, which |
| * tries to acquire the stream lock when going to ready. */ |
| GST_INPUT_SELECTOR_LOCK (self); |
| self->eos = TRUE; |
| self->flushing = TRUE; |
| GST_INPUT_SELECTOR_BROADCAST (self); |
| GST_INPUT_SELECTOR_UNLOCK (self); |
| break; |
| default: |
| break; |
| } |
| |
| result = GST_ELEMENT_CLASS (parent_class)->change_state (element, transition); |
| |
| switch (transition) { |
| case GST_STATE_CHANGE_PAUSED_TO_READY: |
| gst_input_selector_reset (self); |
| break; |
| default: |
| break; |
| } |
| |
| return result; |
| } |