| /* GStreamer |
| * Copyright (C) 2005 Wim Taymans <wim@fluendo.com> |
| * |
| * gstsegment.h: Header for GstSegment subsystem |
| * |
| * This library is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU Library General Public |
| * License as published by the Free Software Foundation; either |
| * version 2 of the License, or (at your option) any later version. |
| * |
| * This library is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * Library General Public License for more details. |
| * |
| * You should have received a copy of the GNU Library General Public |
| * License along with this library; if not, write to the |
| * Free Software Foundation, Inc., 51 Franklin St, Fifth Floor, |
| * Boston, MA 02110-1301, USA. |
| */ |
| |
| |
| #ifndef __GST_SEGMENT_H__ |
| #define __GST_SEGMENT_H__ |
| |
| #include <gst/gstformat.h> |
| |
| G_BEGIN_DECLS |
| |
| #define GST_TYPE_SEGMENT (gst_segment_get_type()) |
| |
| typedef struct _GstSegment GstSegment; |
| |
| /** |
| * GstSeekType: |
| * @GST_SEEK_TYPE_NONE: no change in position is required |
| * @GST_SEEK_TYPE_SET: absolute position is requested |
| * @GST_SEEK_TYPE_END: relative position to duration is requested |
| * |
| * The different types of seek events. When constructing a seek event with |
| * gst_event_new_seek() or when doing gst_segment_do_seek (). |
| */ |
| typedef enum { |
| /* one of these */ |
| GST_SEEK_TYPE_NONE = 0, |
| GST_SEEK_TYPE_SET = 1, |
| GST_SEEK_TYPE_END = 2 |
| } GstSeekType; |
| |
| /** |
| * GstSeekFlags: |
| * @GST_SEEK_FLAG_NONE: no flag |
| * @GST_SEEK_FLAG_FLUSH: flush pipeline |
| * @GST_SEEK_FLAG_ACCURATE: accurate position is requested, this might |
| * be considerably slower for some formats. |
| * @GST_SEEK_FLAG_KEY_UNIT: seek to the nearest keyframe. This might be |
| * faster but less accurate. |
| * @GST_SEEK_FLAG_SEGMENT: perform a segment seek. |
| * @GST_SEEK_FLAG_TRICKMODE: when doing fast forward or fast reverse playback, allow |
| * elements to skip frames instead of generating all |
| * frames. (Since 1.6) |
| * @GST_SEEK_FLAG_SNAP_BEFORE: go to a location before the requested position, |
| * if %GST_SEEK_FLAG_KEY_UNIT this means the keyframe at or before |
| * the requested position the one at or before the seek target. |
| * @GST_SEEK_FLAG_SNAP_AFTER: go to a location after the requested position, |
| * if %GST_SEEK_FLAG_KEY_UNIT this means the keyframe at of after the |
| * requested position. |
| * @GST_SEEK_FLAG_SNAP_NEAREST: go to a position near the requested position, |
| * if %GST_SEEK_FLAG_KEY_UNIT this means the keyframe closest |
| * to the requested position, if both keyframes are at an equal |
| * distance, behaves like %GST_SEEK_FLAG_SNAP_BEFORE. |
| * @GST_SEEK_FLAG_TRICKMODE_KEY_UNITS: when doing fast forward or fast reverse |
| * playback, request that elements only decode keyframes |
| * and skip all other content, for formats that have |
| * keyframes. (Since 1.6) |
| * @GST_SEEK_FLAG_TRICKMODE_NO_AUDIO: when doing fast forward or fast reverse |
| * playback, request that audio decoder elements skip |
| * decoding and output only gap events or silence. (Since 1.6) |
| * @GST_SEEK_FLAG_SKIP: Deprecated backward compatibility flag, replaced |
| * by %GST_SEEK_FLAG_TRICKMODE |
| * |
| * Flags to be used with gst_element_seek() or gst_event_new_seek(). All flags |
| * can be used together. |
| * |
| * A non flushing seek might take some time to perform as the currently |
| * playing data in the pipeline will not be cleared. |
| * |
| * An accurate seek might be slower for formats that don't have any indexes |
| * or timestamp markers in the stream. Specifying this flag might require a |
| * complete scan of the file in those cases. |
| * |
| * When performing a segment seek: after the playback of the segment completes, |
| * no EOS will be emitted by the element that performed the seek, but a |
| * %GST_MESSAGE_SEGMENT_DONE message will be posted on the bus by the element. |
| * When this message is posted, it is possible to send a new seek event to |
| * continue playback. With this seek method it is possible to perform seamless |
| * looping or simple linear editing. |
| * |
| * When doing fast forward (rate > 1.0) or fast reverse (rate < -1.0) trickmode |
| * playback, the %GST_SEEK_FLAG_TRICKMODE flag can be used to instruct decoders |
| * and demuxers to adjust the playback rate by skipping frames. This can improve |
| * performance and decrease CPU usage because not all frames need to be decoded. |
| * |
| * Beyond that, the %GST_SEEK_FLAG_TRICKMODE_KEY_UNITS flag can be used to |
| * request that decoders skip all frames except key units, and |
| * %GST_SEEK_FLAG_TRICKMODE_NO_AUDIO flags can be used to request that audio |
| * decoders do no decoding at all, and simple output silence. |
| * |
| * The %GST_SEEK_FLAG_SNAP_BEFORE flag can be used to snap to the previous |
| * relevant location, and the %GST_SEEK_FLAG_SNAP_AFTER flag can be used to |
| * select the next relevant location. If %GST_SEEK_FLAG_KEY_UNIT is specified, |
| * the relevant location is a keyframe. If both flags are specified, the nearest |
| * of these locations will be selected. If none are specified, the implementation is |
| * free to select whichever it wants. |
| * |
| * The before and after here are in running time, so when playing backwards, |
| * the next location refers to the one that will played in next, and not the |
| * one that is located after in the actual source stream. |
| * |
| * Also see part-seeking.txt in the GStreamer design documentation for more |
| * details on the meaning of these flags and the behaviour expected of |
| * elements that handle them. |
| */ |
| typedef enum { |
| GST_SEEK_FLAG_NONE = 0, |
| GST_SEEK_FLAG_FLUSH = (1 << 0), |
| GST_SEEK_FLAG_ACCURATE = (1 << 1), |
| GST_SEEK_FLAG_KEY_UNIT = (1 << 2), |
| GST_SEEK_FLAG_SEGMENT = (1 << 3), |
| GST_SEEK_FLAG_TRICKMODE = (1 << 4), |
| /* FIXME 2.0: Remove _SKIP flag, |
| * which was kept for backward compat when _TRICKMODE was added */ |
| GST_SEEK_FLAG_SKIP = (1 << 4), |
| GST_SEEK_FLAG_SNAP_BEFORE = (1 << 5), |
| GST_SEEK_FLAG_SNAP_AFTER = (1 << 6), |
| GST_SEEK_FLAG_SNAP_NEAREST = GST_SEEK_FLAG_SNAP_BEFORE | GST_SEEK_FLAG_SNAP_AFTER, |
| /* Careful to restart next flag with 1<<7 here */ |
| GST_SEEK_FLAG_TRICKMODE_KEY_UNITS = (1 << 7), |
| GST_SEEK_FLAG_TRICKMODE_NO_AUDIO = (1 << 8), |
| } GstSeekFlags; |
| |
| /** |
| * GstSegmentFlags: |
| * @GST_SEGMENT_FLAG_NONE: no flags |
| * @GST_SEGMENT_FLAG_RESET: reset the pipeline running_time to the segment |
| * running_time |
| * @GST_SEGMENT_FLAG_TRICKMODE: perform skip playback (Since 1.6) |
| * @GST_SEGMENT_FLAG_SEGMENT: send SEGMENT_DONE instead of EOS |
| * @GST_SEGMENT_FLAG_TRICKMODE_KEY_UNITS: Decode only keyframes, where |
| * possible (Since 1.6) |
| * @GST_SEGMENT_FLAG_TRICKMODE_NO_AUDIO: Do not decode any audio, where |
| * possible (Since 1.6) |
| * @GST_SEGMENT_FLAG_SKIP: Deprecated backward compatibility flag, replaced |
| * by @GST_SEGMENT_FLAG_TRICKMODE |
| * |
| * Flags for the GstSegment structure. Currently mapped to the corresponding |
| * values of the seek flags. |
| */ |
| /* Note: update gst_segment_do_seek() when adding new flags here */ |
| typedef enum { /*< flags >*/ |
| GST_SEGMENT_FLAG_NONE = GST_SEEK_FLAG_NONE, |
| GST_SEGMENT_FLAG_RESET = GST_SEEK_FLAG_FLUSH, |
| GST_SEGMENT_FLAG_TRICKMODE = GST_SEEK_FLAG_TRICKMODE, |
| /* FIXME 2.0: Remove _SKIP flag, |
| * which was kept for backward compat when _TRICKMODE was added */ |
| GST_SEGMENT_FLAG_SKIP = GST_SEEK_FLAG_TRICKMODE, |
| GST_SEGMENT_FLAG_SEGMENT = GST_SEEK_FLAG_SEGMENT, |
| GST_SEGMENT_FLAG_TRICKMODE_KEY_UNITS = GST_SEEK_FLAG_TRICKMODE_KEY_UNITS, |
| GST_SEGMENT_FLAG_TRICKMODE_NO_AUDIO = GST_SEEK_FLAG_TRICKMODE_NO_AUDIO |
| } GstSegmentFlags; |
| |
| /** |
| * GstSegment: |
| * @flags: flags for this segment |
| * @rate: the playback rate of the segment |
| * @applied_rate: the already applied rate to the segment |
| * @format: the format of the segment values |
| * @base: the running time (plus elapsed time, see offset) of the segment start |
| * @offset: the amount (in buffer timestamps) that has already been elapsed in |
| * the segment |
| * @start: the start of the segment in buffer timestamp time (PTS) |
| * @stop: the stop of the segment in buffer timestamp time (PTS) |
| * @time: the stream time of the segment start |
| * @position: the buffer timestamp position in the segment (used internally by |
| * elements such as sources, demuxers or parsers to track progress) |
| * @duration: the duration of the segment |
| * |
| * A helper structure that holds the configured region of |
| * interest in a media file. |
| */ |
| struct _GstSegment { |
| /*< public >*/ |
| GstSegmentFlags flags; |
| |
| gdouble rate; |
| gdouble applied_rate; |
| |
| GstFormat format; |
| guint64 base; |
| guint64 offset; |
| guint64 start; |
| guint64 stop; |
| guint64 time; |
| |
| guint64 position; |
| guint64 duration; |
| |
| /* < private > */ |
| gpointer _gst_reserved[GST_PADDING]; |
| }; |
| |
| GType gst_segment_get_type (void); |
| |
| GstSegment * gst_segment_new (void) G_GNUC_MALLOC; |
| GstSegment * gst_segment_copy (const GstSegment *segment) G_GNUC_MALLOC; |
| void gst_segment_copy_into (const GstSegment *src, GstSegment *dest); |
| void gst_segment_free (GstSegment *segment); |
| |
| void gst_segment_init (GstSegment *segment, GstFormat format); |
| |
| gint gst_segment_to_stream_time_full (const GstSegment *segment, GstFormat format, guint64 position, guint64 * stream_time); |
| guint64 gst_segment_to_stream_time (const GstSegment *segment, GstFormat format, guint64 position); |
| gint gst_segment_position_from_stream_time_full (const GstSegment * segment, GstFormat format, guint64 stream_time, guint64 * position); |
| guint64 gst_segment_position_from_stream_time (const GstSegment * segment, GstFormat format, guint64 stream_time); |
| guint64 gst_segment_to_running_time (const GstSegment *segment, GstFormat format, guint64 position); |
| |
| gint gst_segment_to_running_time_full (const GstSegment *segment, GstFormat format, guint64 position, |
| guint64 * running_time); |
| #ifndef GST_DISABLE_DEPRECATED |
| guint64 gst_segment_to_position (const GstSegment *segment, GstFormat format, guint64 running_time); |
| #endif |
| gint gst_segment_position_from_running_time_full (const GstSegment *segment, GstFormat format, guint64 running_time, guint64 * position); |
| guint64 gst_segment_position_from_running_time (const GstSegment *segment, GstFormat format, guint64 running_time); |
| |
| gboolean gst_segment_set_running_time (GstSegment *segment, GstFormat format, guint64 running_time); |
| |
| gboolean gst_segment_offset_running_time (GstSegment *segment, GstFormat format, gint64 offset); |
| |
| gboolean gst_segment_clip (const GstSegment *segment, GstFormat format, guint64 start, |
| guint64 stop, guint64 *clip_start, guint64 *clip_stop); |
| |
| |
| gboolean gst_segment_do_seek (GstSegment * segment, gdouble rate, |
| GstFormat format, GstSeekFlags flags, |
| GstSeekType start_type, guint64 start, |
| GstSeekType stop_type, guint64 stop, gboolean * update); |
| gboolean gst_segment_is_equal (const GstSegment * s0, const GstSegment * s1); |
| |
| #ifdef G_DEFINE_AUTOPTR_CLEANUP_FUNC |
| G_DEFINE_AUTOPTR_CLEANUP_FUNC(GstSegment, gst_segment_free) |
| #endif |
| |
| G_END_DECLS |
| |
| #endif /* __GST_SEGMENT_H__ */ |
