| /* GStreamer |
| * Copyright (C) 1999,2000 Erik Walthinsen <omega@cse.ogi.edu> |
| * 2000 Wim Taymans <wim.taymans@chello.be> |
| * 2005 Wim Taymans <wim@fluendo.com> |
| * |
| * gstevent.c: GstEvent subsystem |
| * |
| * This library is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU Library General Public |
| * License as published by the Free Software Foundation; either |
| * version 2 of the License, or (at your option) any later version. |
| * |
| * This library is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * Library General Public License for more details. |
| * |
| * You should have received a copy of the GNU Library General Public |
| * License along with this library; if not, write to the |
| * Free Software Foundation, Inc., 51 Franklin St, Fifth Floor, |
| * Boston, MA 02110-1301, USA. |
| */ |
| |
| /** |
| * SECTION:gstevent |
| * @short_description: Structure describing events that are passed up and down |
| * a pipeline |
| * @see_also: #GstPad, #GstElement |
| * |
| * The event class provides factory methods to construct events for sending |
| * and functions to query (parse) received events. |
| * |
| * Events are usually created with gst_event_new_*() which takes event-type |
| * specific parameters as arguments. |
| * To send an event application will usually use gst_element_send_event() and |
| * elements will use gst_pad_send_event() or gst_pad_push_event(). |
| * The event should be unreffed with gst_event_unref() if it has not been sent. |
| * |
| * Events that have been received can be parsed with their respective |
| * gst_event_parse_*() functions. It is valid to pass %NULL for unwanted details. |
| * |
| * Events are passed between elements in parallel to the data stream. Some events |
| * are serialized with buffers, others are not. Some events only travel downstream, |
| * others only upstream. Some events can travel both upstream and downstream. |
| * |
| * The events are used to signal special conditions in the datastream such as |
| * EOS (end of stream) or the start of a new stream-segment. |
| * Events are also used to flush the pipeline of any pending data. |
| * |
| * Most of the event API is used inside plugins. Applications usually only |
| * construct and use seek events. |
| * To do that gst_event_new_seek() is used to create a seek event. It takes |
| * the needed parameters to specify seeking time and mode. |
| * |[ |
| * GstEvent *event; |
| * gboolean result; |
| * ... |
| * // construct a seek event to play the media from second 2 to 5, flush |
| * // the pipeline to decrease latency. |
| * event = gst_event_new_seek (1.0, |
| * GST_FORMAT_TIME, |
| * GST_SEEK_FLAG_FLUSH, |
| * GST_SEEK_TYPE_SET, 2 * GST_SECOND, |
| * GST_SEEK_TYPE_SET, 5 * GST_SECOND); |
| * ... |
| * result = gst_element_send_event (pipeline, event); |
| * if (!result) |
| * g_warning ("seek failed"); |
| * ... |
| * ]| |
| */ |
| |
| |
| #include "gst_private.h" |
| #include <string.h> /* memcpy */ |
| |
| #include "gstinfo.h" |
| #include "gstevent.h" |
| #include "gstenumtypes.h" |
| #include "gstutils.h" |
| #include "gstquark.h" |
| #include "gstvalue.h" |
| |
| GType _gst_event_type = 0; |
| |
| typedef struct |
| { |
| GstEvent event; |
| |
| GstStructure *structure; |
| gint64 running_time_offset; |
| } GstEventImpl; |
| |
| #define GST_EVENT_STRUCTURE(e) (((GstEventImpl *)(e))->structure) |
| |
| typedef struct |
| { |
| const gint type; |
| const gchar *name; |
| GQuark quark; |
| } GstEventQuarks; |
| |
| static GstEventQuarks event_quarks[] = { |
| {GST_EVENT_UNKNOWN, "unknown", 0}, |
| {GST_EVENT_FLUSH_START, "flush-start", 0}, |
| {GST_EVENT_FLUSH_STOP, "flush-stop", 0}, |
| {GST_EVENT_STREAM_START, "stream-start", 0}, |
| {GST_EVENT_CAPS, "caps", 0}, |
| {GST_EVENT_SEGMENT, "segment", 0}, |
| {GST_EVENT_TAG, "tag", 0}, |
| {GST_EVENT_TOC, "toc", 0}, |
| {GST_EVENT_PROTECTION, "protection", 0}, |
| {GST_EVENT_BUFFERSIZE, "buffersize", 0}, |
| {GST_EVENT_SINK_MESSAGE, "sink-message", 0}, |
| {GST_EVENT_EOS, "eos", 0}, |
| {GST_EVENT_SEGMENT_DONE, "segment-done", 0}, |
| {GST_EVENT_GAP, "gap", 0}, |
| {GST_EVENT_QOS, "qos", 0}, |
| {GST_EVENT_SEEK, "seek", 0}, |
| {GST_EVENT_NAVIGATION, "navigation", 0}, |
| {GST_EVENT_LATENCY, "latency", 0}, |
| {GST_EVENT_STEP, "step", 0}, |
| {GST_EVENT_RECONFIGURE, "reconfigure", 0}, |
| {GST_EVENT_TOC_SELECT, "toc-select", 0}, |
| {GST_EVENT_CUSTOM_UPSTREAM, "custom-upstream", 0}, |
| {GST_EVENT_CUSTOM_DOWNSTREAM, "custom-downstream", 0}, |
| {GST_EVENT_CUSTOM_DOWNSTREAM_OOB, "custom-downstream-oob", 0}, |
| {GST_EVENT_CUSTOM_DOWNSTREAM_STICKY, "custom-downstream-sticky", 0}, |
| {GST_EVENT_CUSTOM_BOTH, "custom-both", 0}, |
| {GST_EVENT_CUSTOM_BOTH_OOB, "custom-both-oob", 0}, |
| |
| {0, NULL, 0} |
| }; |
| |
| GST_DEFINE_MINI_OBJECT_TYPE (GstEvent, gst_event); |
| |
| void |
| _priv_gst_event_initialize (void) |
| { |
| gint i; |
| |
| _gst_event_type = gst_event_get_type (); |
| |
| g_type_class_ref (gst_seek_flags_get_type ()); |
| g_type_class_ref (gst_seek_type_get_type ()); |
| |
| for (i = 0; event_quarks[i].name; i++) { |
| event_quarks[i].quark = g_quark_from_static_string (event_quarks[i].name); |
| } |
| } |
| |
| /** |
| * gst_event_type_get_name: |
| * @type: the event type |
| * |
| * Get a printable name for the given event type. Do not modify or free. |
| * |
| * Returns: a reference to the static name of the event. |
| */ |
| const gchar * |
| gst_event_type_get_name (GstEventType type) |
| { |
| gint i; |
| |
| for (i = 0; event_quarks[i].name; i++) { |
| if (type == event_quarks[i].type) |
| return event_quarks[i].name; |
| } |
| return "unknown"; |
| } |
| |
| /** |
| * gst_event_type_to_quark: |
| * @type: the event type |
| * |
| * Get the unique quark for the given event type. |
| * |
| * Returns: the quark associated with the event type |
| */ |
| GQuark |
| gst_event_type_to_quark (GstEventType type) |
| { |
| gint i; |
| |
| for (i = 0; event_quarks[i].name; i++) { |
| if (type == event_quarks[i].type) |
| return event_quarks[i].quark; |
| } |
| return 0; |
| } |
| |
| /** |
| * gst_event_type_get_flags: |
| * @type: a #GstEventType |
| * |
| * Gets the #GstEventTypeFlags associated with @type. |
| * |
| * Returns: a #GstEventTypeFlags. |
| */ |
| GstEventTypeFlags |
| gst_event_type_get_flags (GstEventType type) |
| { |
| GstEventTypeFlags ret; |
| |
| ret = type & ((1 << GST_EVENT_NUM_SHIFT) - 1); |
| |
| return ret; |
| } |
| |
| static void |
| _gst_event_free (GstEvent * event) |
| { |
| GstStructure *s; |
| |
| g_return_if_fail (event != NULL); |
| g_return_if_fail (GST_IS_EVENT (event)); |
| |
| GST_CAT_LOG (GST_CAT_EVENT, "freeing event %p type %s", event, |
| GST_EVENT_TYPE_NAME (event)); |
| |
| s = GST_EVENT_STRUCTURE (event); |
| |
| if (s) { |
| gst_structure_set_parent_refcount (s, NULL); |
| gst_structure_free (s); |
| } |
| |
| g_slice_free1 (sizeof (GstEventImpl), event); |
| } |
| |
| static void gst_event_init (GstEventImpl * event, GstEventType type); |
| |
| static GstEvent * |
| _gst_event_copy (GstEvent * event) |
| { |
| GstEventImpl *copy; |
| GstStructure *s; |
| |
| copy = g_slice_new0 (GstEventImpl); |
| |
| gst_event_init (copy, GST_EVENT_TYPE (event)); |
| |
| GST_EVENT_TIMESTAMP (copy) = GST_EVENT_TIMESTAMP (event); |
| GST_EVENT_SEQNUM (copy) = GST_EVENT_SEQNUM (event); |
| |
| s = GST_EVENT_STRUCTURE (event); |
| if (s) { |
| GST_EVENT_STRUCTURE (copy) = gst_structure_copy (s); |
| gst_structure_set_parent_refcount (GST_EVENT_STRUCTURE (copy), |
| ©->event.mini_object.refcount); |
| } else { |
| GST_EVENT_STRUCTURE (copy) = NULL; |
| } |
| |
| ((GstEventImpl *) copy)->running_time_offset = |
| ((GstEventImpl *) event)->running_time_offset; |
| |
| return GST_EVENT_CAST (copy); |
| } |
| |
| static void |
| gst_event_init (GstEventImpl * event, GstEventType type) |
| { |
| gst_mini_object_init (GST_MINI_OBJECT_CAST (event), 0, _gst_event_type, |
| (GstMiniObjectCopyFunction) _gst_event_copy, NULL, |
| (GstMiniObjectFreeFunction) _gst_event_free); |
| |
| GST_EVENT_TYPE (event) = type; |
| GST_EVENT_TIMESTAMP (event) = GST_CLOCK_TIME_NONE; |
| GST_EVENT_SEQNUM (event) = gst_util_seqnum_next (); |
| event->running_time_offset = 0; |
| } |
| |
| |
| /** |
| * gst_event_new_custom: |
| * @type: The type of the new event |
| * @structure: (transfer full): the structure for the event. The event will |
| * take ownership of the structure. |
| * |
| * Create a new custom-typed event. This can be used for anything not |
| * handled by other event-specific functions to pass an event to another |
| * element. |
| * |
| * Make sure to allocate an event type with the #GST_EVENT_MAKE_TYPE macro, |
| * assigning a free number and filling in the correct direction and |
| * serialization flags. |
| * |
| * New custom events can also be created by subclassing the event type if |
| * needed. |
| * |
| * Returns: (transfer full): the new custom event. |
| */ |
| GstEvent * |
| gst_event_new_custom (GstEventType type, GstStructure * structure) |
| { |
| GstEventImpl *event; |
| |
| event = g_slice_new0 (GstEventImpl); |
| |
| GST_CAT_DEBUG (GST_CAT_EVENT, "creating new event %p %s %d", event, |
| gst_event_type_get_name (type), type); |
| |
| if (structure) { |
| /* structure must not have a parent */ |
| if (!gst_structure_set_parent_refcount (structure, |
| &event->event.mini_object.refcount)) |
| goto had_parent; |
| |
| } |
| gst_event_init (event, type); |
| |
| GST_EVENT_STRUCTURE (event) = structure; |
| |
| return GST_EVENT_CAST (event); |
| |
| /* ERRORS */ |
| had_parent: |
| { |
| g_slice_free1 (sizeof (GstEventImpl), event); |
| g_warning ("structure is already owned by another object"); |
| return NULL; |
| } |
| } |
| |
| /** |
| * gst_event_get_structure: |
| * @event: The #GstEvent. |
| * |
| * Access the structure of the event. |
| * |
| * Returns: The structure of the event. The structure is still |
| * owned by the event, which means that you should not free it and |
| * that the pointer becomes invalid when you free the event. |
| * |
| * MT safe. |
| */ |
| const GstStructure * |
| gst_event_get_structure (GstEvent * event) |
| { |
| g_return_val_if_fail (GST_IS_EVENT (event), NULL); |
| |
| return GST_EVENT_STRUCTURE (event); |
| } |
| |
| /** |
| * gst_event_writable_structure: |
| * @event: The #GstEvent. |
| * |
| * Get a writable version of the structure. |
| * |
| * Returns: (transfer none): The structure of the event. The structure |
| * is still owned by the event, which means that you should not free |
| * it and that the pointer becomes invalid when you free the event. |
| * This function checks if @event is writable and will never return |
| * %NULL. |
| * |
| * MT safe. |
| */ |
| GstStructure * |
| gst_event_writable_structure (GstEvent * event) |
| { |
| GstStructure *structure; |
| |
| g_return_val_if_fail (GST_IS_EVENT (event), NULL); |
| g_return_val_if_fail (gst_event_is_writable (event), NULL); |
| |
| structure = GST_EVENT_STRUCTURE (event); |
| |
| if (structure == NULL) { |
| structure = |
| gst_structure_new_id_empty (gst_event_type_to_quark (GST_EVENT_TYPE |
| (event))); |
| gst_structure_set_parent_refcount (structure, &event->mini_object.refcount); |
| GST_EVENT_STRUCTURE (event) = structure; |
| } |
| return structure; |
| } |
| |
| /** |
| * gst_event_has_name: |
| * @event: The #GstEvent. |
| * @name: name to check |
| * |
| * Checks if @event has the given @name. This function is usually used to |
| * check the name of a custom event. |
| * |
| * Returns: %TRUE if @name matches the name of the event structure. |
| */ |
| gboolean |
| gst_event_has_name (GstEvent * event, const gchar * name) |
| { |
| g_return_val_if_fail (GST_IS_EVENT (event), FALSE); |
| |
| if (GST_EVENT_STRUCTURE (event) == NULL) |
| return FALSE; |
| |
| return gst_structure_has_name (GST_EVENT_STRUCTURE (event), name); |
| } |
| |
| /** |
| * gst_event_get_seqnum: |
| * @event: A #GstEvent. |
| * |
| * Retrieve the sequence number of a event. |
| * |
| * Events have ever-incrementing sequence numbers, which may also be set |
| * explicitly via gst_event_set_seqnum(). Sequence numbers are typically used to |
| * indicate that a event corresponds to some other set of events or messages, |
| * for example an EOS event corresponding to a SEEK event. It is considered good |
| * practice to make this correspondence when possible, though it is not |
| * required. |
| * |
| * Note that events and messages share the same sequence number incrementor; |
| * two events or messages will never have the same sequence number unless |
| * that correspondence was made explicitly. |
| * |
| * Returns: The event's sequence number. |
| * |
| * MT safe. |
| */ |
| guint32 |
| gst_event_get_seqnum (GstEvent * event) |
| { |
| g_return_val_if_fail (GST_IS_EVENT (event), -1); |
| |
| return GST_EVENT_SEQNUM (event); |
| } |
| |
| /** |
| * gst_event_set_seqnum: |
| * @event: A #GstEvent. |
| * @seqnum: A sequence number. |
| * |
| * Set the sequence number of a event. |
| * |
| * This function might be called by the creator of a event to indicate that the |
| * event relates to other events or messages. See gst_event_get_seqnum() for |
| * more information. |
| * |
| * MT safe. |
| */ |
| void |
| gst_event_set_seqnum (GstEvent * event, guint32 seqnum) |
| { |
| g_return_if_fail (GST_IS_EVENT (event)); |
| |
| GST_EVENT_SEQNUM (event) = seqnum; |
| } |
| |
| /** |
| * gst_event_get_running_time_offset: |
| * @event: A #GstEvent. |
| * |
| * Retrieve the accumulated running time offset of the event. |
| * |
| * Events passing through #GstPads that have a running time |
| * offset set via gst_pad_set_offset() will get their offset |
| * adjusted according to the pad's offset. |
| * |
| * If the event contains any information that related to the |
| * running time, this information will need to be updated |
| * before usage with this offset. |
| * |
| * Returns: The event's running time offset |
| * |
| * MT safe. |
| * |
| * Since: 1.4 |
| */ |
| gint64 |
| gst_event_get_running_time_offset (GstEvent * event) |
| { |
| g_return_val_if_fail (GST_IS_EVENT (event), 0); |
| |
| return ((GstEventImpl *) event)->running_time_offset; |
| } |
| |
| /** |
| * gst_event_set_running_time_offset: |
| * @event: A #GstEvent. |
| * @offset: A the new running time offset |
| * |
| * Set the running time offset of a event. See |
| * gst_event_get_running_time_offset() for more information. |
| * |
| * MT safe. |
| * |
| * Since: 1.4 |
| */ |
| void |
| gst_event_set_running_time_offset (GstEvent * event, gint64 offset) |
| { |
| g_return_if_fail (GST_IS_EVENT (event)); |
| |
| ((GstEventImpl *) event)->running_time_offset = offset; |
| } |
| |
| /** |
| * gst_event_new_flush_start: |
| * |
| * Allocate a new flush start event. The flush start event can be sent |
| * upstream and downstream and travels out-of-bounds with the dataflow. |
| * |
| * It marks pads as being flushing and will make them return |
| * #GST_FLOW_FLUSHING when used for data flow with gst_pad_push(), |
| * gst_pad_chain(), gst_pad_get_range() and gst_pad_pull_range(). |
| * Any event (except a #GST_EVENT_FLUSH_STOP) received |
| * on a flushing pad will return %FALSE immediately. |
| * |
| * Elements should unlock any blocking functions and exit their streaming |
| * functions as fast as possible when this event is received. |
| * |
| * This event is typically generated after a seek to flush out all queued data |
| * in the pipeline so that the new media is played as soon as possible. |
| * |
| * Returns: (transfer full): a new flush start event. |
| */ |
| GstEvent * |
| gst_event_new_flush_start (void) |
| { |
| return gst_event_new_custom (GST_EVENT_FLUSH_START, NULL); |
| } |
| |
| /** |
| * gst_event_new_flush_stop: |
| * @reset_time: if time should be reset |
| * |
| * Allocate a new flush stop event. The flush stop event can be sent |
| * upstream and downstream and travels serialized with the dataflow. |
| * It is typically sent after sending a FLUSH_START event to make the |
| * pads accept data again. |
| * |
| * Elements can process this event synchronized with the dataflow since |
| * the preceding FLUSH_START event stopped the dataflow. |
| * |
| * This event is typically generated to complete a seek and to resume |
| * dataflow. |
| * |
| * Returns: (transfer full): a new flush stop event. |
| */ |
| GstEvent * |
| gst_event_new_flush_stop (gboolean reset_time) |
| { |
| GstEvent *event; |
| |
| GST_CAT_INFO (GST_CAT_EVENT, "creating flush stop %d", reset_time); |
| |
| event = gst_event_new_custom (GST_EVENT_FLUSH_STOP, |
| gst_structure_new_id (GST_QUARK (EVENT_FLUSH_STOP), |
| GST_QUARK (RESET_TIME), G_TYPE_BOOLEAN, reset_time, NULL)); |
| |
| return event; |
| } |
| |
| /** |
| * gst_event_parse_flush_stop: |
| * @event: The event to parse |
| * @reset_time: (out): if time should be reset |
| * |
| * Parse the FLUSH_STOP event and retrieve the @reset_time member. |
| */ |
| void |
| gst_event_parse_flush_stop (GstEvent * event, gboolean * reset_time) |
| { |
| GstStructure *structure; |
| |
| g_return_if_fail (GST_IS_EVENT (event)); |
| g_return_if_fail (GST_EVENT_TYPE (event) == GST_EVENT_FLUSH_STOP); |
| |
| structure = GST_EVENT_STRUCTURE (event); |
| if (G_LIKELY (reset_time)) |
| *reset_time = |
| g_value_get_boolean (gst_structure_id_get_value (structure, |
| GST_QUARK (RESET_TIME))); |
| } |
| |
| /** |
| * gst_event_new_eos: |
| * |
| * Create a new EOS event. The eos event can only travel downstream |
| * synchronized with the buffer flow. Elements that receive the EOS |
| * event on a pad can return #GST_FLOW_EOS as a #GstFlowReturn |
| * when data after the EOS event arrives. |
| * |
| * The EOS event will travel down to the sink elements in the pipeline |
| * which will then post the #GST_MESSAGE_EOS on the bus after they have |
| * finished playing any buffered data. |
| * |
| * When all sinks have posted an EOS message, an EOS message is |
| * forwarded to the application. |
| * |
| * The EOS event itself will not cause any state transitions of the pipeline. |
| * |
| * Returns: (transfer full): the new EOS event. |
| */ |
| GstEvent * |
| gst_event_new_eos (void) |
| { |
| return gst_event_new_custom (GST_EVENT_EOS, NULL); |
| } |
| |
| /** |
| * gst_event_new_gap: |
| * @timestamp: the start time (pts) of the gap |
| * @duration: the duration of the gap |
| * |
| * Create a new GAP event. A gap event can be thought of as conceptually |
| * equivalent to a buffer to signal that there is no data for a certain |
| * amount of time. This is useful to signal a gap to downstream elements |
| * which may wait for data, such as muxers or mixers or overlays, especially |
| * for sparse streams such as subtitle streams. |
| * |
| * Returns: (transfer full): the new GAP event. |
| */ |
| GstEvent * |
| gst_event_new_gap (GstClockTime timestamp, GstClockTime duration) |
| { |
| GstEvent *event; |
| |
| g_return_val_if_fail (GST_CLOCK_TIME_IS_VALID (timestamp), NULL); |
| |
| GST_CAT_TRACE (GST_CAT_EVENT, "creating gap %" GST_TIME_FORMAT " - " |
| "%" GST_TIME_FORMAT " (duration: %" GST_TIME_FORMAT ")", |
| GST_TIME_ARGS (timestamp), GST_TIME_ARGS (timestamp + duration), |
| GST_TIME_ARGS (duration)); |
| |
| event = gst_event_new_custom (GST_EVENT_GAP, |
| gst_structure_new_id (GST_QUARK (EVENT_GAP), |
| GST_QUARK (TIMESTAMP), GST_TYPE_CLOCK_TIME, timestamp, |
| GST_QUARK (DURATION), GST_TYPE_CLOCK_TIME, duration, NULL)); |
| |
| return event; |
| } |
| |
| /** |
| * gst_event_parse_gap: |
| * @event: a #GstEvent of type #GST_EVENT_GAP |
| * @timestamp: (out) (allow-none): location where to store the |
| * start time (pts) of the gap, or %NULL |
| * @duration: (out) (allow-none): location where to store the duration of |
| * the gap, or %NULL |
| * |
| * Extract timestamp and duration from a new GAP event. |
| */ |
| void |
| gst_event_parse_gap (GstEvent * event, GstClockTime * timestamp, |
| GstClockTime * duration) |
| { |
| GstStructure *structure; |
| |
| g_return_if_fail (GST_IS_EVENT (event)); |
| g_return_if_fail (GST_EVENT_TYPE (event) == GST_EVENT_GAP); |
| |
| structure = GST_EVENT_STRUCTURE (event); |
| gst_structure_id_get (structure, |
| GST_QUARK (TIMESTAMP), GST_TYPE_CLOCK_TIME, timestamp, |
| GST_QUARK (DURATION), GST_TYPE_CLOCK_TIME, duration, NULL); |
| } |
| |
| /** |
| * gst_event_new_caps: |
| * @caps: (transfer none): a #GstCaps |
| * |
| * Create a new CAPS event for @caps. The caps event can only travel downstream |
| * synchronized with the buffer flow and contains the format of the buffers |
| * that will follow after the event. |
| * |
| * Returns: (transfer full): the new CAPS event. |
| */ |
| GstEvent * |
| gst_event_new_caps (GstCaps * caps) |
| { |
| GstEvent *event; |
| |
| g_return_val_if_fail (caps != NULL, NULL); |
| g_return_val_if_fail (gst_caps_is_fixed (caps), NULL); |
| |
| GST_CAT_INFO (GST_CAT_EVENT, "creating caps event %" GST_PTR_FORMAT, caps); |
| |
| event = gst_event_new_custom (GST_EVENT_CAPS, |
| gst_structure_new_id (GST_QUARK (EVENT_CAPS), |
| GST_QUARK (CAPS), GST_TYPE_CAPS, caps, NULL)); |
| |
| return event; |
| } |
| |
| /** |
| * gst_event_parse_caps: |
| * @event: The event to parse |
| * @caps: (out) (transfer none): A pointer to the caps |
| * |
| * Get the caps from @event. The caps remains valid as long as @event remains |
| * valid. |
| */ |
| void |
| gst_event_parse_caps (GstEvent * event, GstCaps ** caps) |
| { |
| GstStructure *structure; |
| |
| g_return_if_fail (GST_IS_EVENT (event)); |
| g_return_if_fail (GST_EVENT_TYPE (event) == GST_EVENT_CAPS); |
| |
| structure = GST_EVENT_STRUCTURE (event); |
| if (G_LIKELY (caps)) |
| *caps = |
| g_value_get_boxed (gst_structure_id_get_value (structure, |
| GST_QUARK (CAPS))); |
| } |
| |
| /** |
| * gst_event_new_segment: |
| * @segment: (transfer none): a #GstSegment |
| * |
| * Create a new SEGMENT event for @segment. The segment event can only travel |
| * downstream synchronized with the buffer flow and contains timing information |
| * and playback properties for the buffers that will follow. |
| * |
| * The segment event marks the range of buffers to be processed. All |
| * data not within the segment range is not to be processed. This can be |
| * used intelligently by plugins to apply more efficient methods of skipping |
| * unneeded data. The valid range is expressed with the @start and @stop |
| * values. |
| * |
| * The time value of the segment is used in conjunction with the start |
| * value to convert the buffer timestamps into the stream time. This is |
| * usually done in sinks to report the current stream_time. |
| * @time represents the stream_time of a buffer carrying a timestamp of |
| * @start. @time cannot be -1. |
| * |
| * @start cannot be -1, @stop can be -1. If there |
| * is a valid @stop given, it must be greater or equal the @start, including |
| * when the indicated playback @rate is < 0. |
| * |
| * The @applied_rate value provides information about any rate adjustment that |
| * has already been made to the timestamps and content on the buffers of the |
| * stream. (@rate * @applied_rate) should always equal the rate that has been |
| * requested for playback. For example, if an element has an input segment |
| * with intended playback @rate of 2.0 and applied_rate of 1.0, it can adjust |
| * incoming timestamps and buffer content by half and output a segment event |
| * with @rate of 1.0 and @applied_rate of 2.0 |
| * |
| * After a segment event, the buffer stream time is calculated with: |
| * |
| * time + (TIMESTAMP(buf) - start) * ABS (rate * applied_rate) |
| * |
| * Returns: (transfer full): the new SEGMENT event. |
| */ |
| GstEvent * |
| gst_event_new_segment (const GstSegment * segment) |
| { |
| GstEvent *event; |
| |
| g_return_val_if_fail (segment != NULL, NULL); |
| g_return_val_if_fail (segment->rate != 0.0, NULL); |
| g_return_val_if_fail (segment->applied_rate != 0.0, NULL); |
| g_return_val_if_fail (segment->format != GST_FORMAT_UNDEFINED, NULL); |
| |
| GST_CAT_INFO (GST_CAT_EVENT, "creating segment event %" GST_SEGMENT_FORMAT, |
| segment); |
| |
| event = gst_event_new_custom (GST_EVENT_SEGMENT, |
| gst_structure_new_id (GST_QUARK (EVENT_SEGMENT), |
| GST_QUARK (SEGMENT), GST_TYPE_SEGMENT, segment, NULL)); |
| |
| return event; |
| } |
| |
| /** |
| * gst_event_parse_segment: |
| * @event: The event to parse |
| * @segment: (out) (transfer none): a pointer to a #GstSegment |
| * |
| * Parses a segment @event and stores the result in the given @segment location. |
| * @segment remains valid only until the @event is freed. Don't modify the segment |
| * and make a copy if you want to modify it or store it for later use. |
| */ |
| void |
| gst_event_parse_segment (GstEvent * event, const GstSegment ** segment) |
| { |
| GstStructure *structure; |
| |
| g_return_if_fail (GST_IS_EVENT (event)); |
| g_return_if_fail (GST_EVENT_TYPE (event) == GST_EVENT_SEGMENT); |
| |
| if (segment) { |
| structure = GST_EVENT_STRUCTURE (event); |
| *segment = g_value_get_boxed (gst_structure_id_get_value (structure, |
| GST_QUARK (SEGMENT))); |
| } |
| } |
| |
| /** |
| * gst_event_copy_segment: |
| * @event: The event to parse |
| * @segment: a pointer to a #GstSegment |
| * |
| * Parses a segment @event and copies the #GstSegment into the location |
| * given by @segment. |
| */ |
| void |
| gst_event_copy_segment (GstEvent * event, GstSegment * segment) |
| { |
| const GstSegment *src; |
| |
| g_return_if_fail (GST_IS_EVENT (event)); |
| g_return_if_fail (GST_EVENT_TYPE (event) == GST_EVENT_SEGMENT); |
| |
| if (segment) { |
| gst_event_parse_segment (event, &src); |
| gst_segment_copy_into (src, segment); |
| } |
| } |
| |
| /** |
| * gst_event_new_tag: |
| * @taglist: (transfer full): metadata list. The event will take ownership |
| * of the taglist. |
| * |
| * Generates a metadata tag event from the given @taglist. |
| * |
| * The scope of the taglist specifies if the taglist applies to the |
| * complete medium or only to this specific stream. As the tag event |
| * is a sticky event, elements should merge tags received from |
| * upstream with a given scope with their own tags with the same |
| * scope and create a new tag event from it. |
| * |
| * Returns: (transfer full): a new #GstEvent |
| */ |
| GstEvent * |
| gst_event_new_tag (GstTagList * taglist) |
| { |
| GstStructure *s; |
| GValue val = G_VALUE_INIT; |
| const gchar *names[] = { "GstTagList-stream", "GstTagList-global" }; |
| |
| g_return_val_if_fail (taglist != NULL, NULL); |
| |
| s = gst_structure_new_empty (names[gst_tag_list_get_scope (taglist)]); |
| g_value_init (&val, GST_TYPE_TAG_LIST); |
| g_value_take_boxed (&val, taglist); |
| gst_structure_id_take_value (s, GST_QUARK (TAGLIST), &val); |
| return gst_event_new_custom (GST_EVENT_TAG, s); |
| } |
| |
| /** |
| * gst_event_parse_tag: |
| * @event: a tag event |
| * @taglist: (out) (transfer none): pointer to metadata list |
| * |
| * Parses a tag @event and stores the results in the given @taglist location. |
| * No reference to the taglist will be returned, it remains valid only until |
| * the @event is freed. Don't modify or free the taglist, make a copy if you |
| * want to modify it or store it for later use. |
| */ |
| void |
| gst_event_parse_tag (GstEvent * event, GstTagList ** taglist) |
| { |
| const GValue *val; |
| |
| g_return_if_fail (GST_IS_EVENT (event)); |
| g_return_if_fail (GST_EVENT_TYPE (event) == GST_EVENT_TAG); |
| |
| val = gst_structure_id_get_value (GST_EVENT_STRUCTURE (event), |
| GST_QUARK (TAGLIST)); |
| |
| if (taglist) |
| *taglist = (GstTagList *) g_value_get_boxed (val); |
| } |
| |
| /* buffersize event */ |
| /** |
| * gst_event_new_buffer_size: |
| * @format: buffer format |
| * @minsize: minimum buffer size |
| * @maxsize: maximum buffer size |
| * @async: thread behavior |
| * |
| * Create a new buffersize event. The event is sent downstream and notifies |
| * elements that they should provide a buffer of the specified dimensions. |
| * |
| * When the @async flag is set, a thread boundary is preferred. |
| * |
| * Returns: (transfer full): a new #GstEvent |
| */ |
| GstEvent * |
| gst_event_new_buffer_size (GstFormat format, gint64 minsize, |
| gint64 maxsize, gboolean async) |
| { |
| GstEvent *event; |
| GstStructure *structure; |
| |
| GST_CAT_INFO (GST_CAT_EVENT, |
| "creating buffersize format %s, minsize %" G_GINT64_FORMAT |
| ", maxsize %" G_GINT64_FORMAT ", async %d", gst_format_get_name (format), |
| minsize, maxsize, async); |
| |
| structure = gst_structure_new_id (GST_QUARK (EVENT_BUFFER_SIZE), |
| GST_QUARK (FORMAT), GST_TYPE_FORMAT, format, |
| GST_QUARK (MINSIZE), G_TYPE_INT64, minsize, |
| GST_QUARK (MAXSIZE), G_TYPE_INT64, maxsize, |
| GST_QUARK (ASYNC), G_TYPE_BOOLEAN, async, NULL); |
| event = gst_event_new_custom (GST_EVENT_BUFFERSIZE, structure); |
| |
| return event; |
| } |
| |
| /** |
| * gst_event_parse_buffer_size: |
| * @event: The event to query |
| * @format: (out): A pointer to store the format in |
| * @minsize: (out): A pointer to store the minsize in |
| * @maxsize: (out): A pointer to store the maxsize in |
| * @async: (out): A pointer to store the async-flag in |
| * |
| * Get the format, minsize, maxsize and async-flag in the buffersize event. |
| */ |
| void |
| gst_event_parse_buffer_size (GstEvent * event, GstFormat * format, |
| gint64 * minsize, gint64 * maxsize, gboolean * async) |
| { |
| const GstStructure *structure; |
| |
| g_return_if_fail (GST_IS_EVENT (event)); |
| g_return_if_fail (GST_EVENT_TYPE (event) == GST_EVENT_BUFFERSIZE); |
| |
| structure = GST_EVENT_STRUCTURE (event); |
| if (format) |
| *format = (GstFormat) |
| g_value_get_enum (gst_structure_id_get_value (structure, |
| GST_QUARK (FORMAT))); |
| if (minsize) |
| *minsize = |
| g_value_get_int64 (gst_structure_id_get_value (structure, |
| GST_QUARK (MINSIZE))); |
| if (maxsize) |
| *maxsize = |
| g_value_get_int64 (gst_structure_id_get_value (structure, |
| GST_QUARK (MAXSIZE))); |
| if (async) |
| *async = |
| g_value_get_boolean (gst_structure_id_get_value (structure, |
| GST_QUARK (ASYNC))); |
| } |
| |
| /** |
| * gst_event_new_qos: |
| * @type: the QoS type |
| * @proportion: the proportion of the qos message |
| * @diff: The time difference of the last Clock sync |
| * @timestamp: The timestamp of the buffer |
| * |
| * Allocate a new qos event with the given values. |
| * The QOS event is generated in an element that wants an upstream |
| * element to either reduce or increase its rate because of |
| * high/low CPU load or other resource usage such as network performance or |
| * throttling. Typically sinks generate these events for each buffer |
| * they receive. |
| * |
| * @type indicates the reason for the QoS event. #GST_QOS_TYPE_OVERFLOW is |
| * used when a buffer arrived in time or when the sink cannot keep up with |
| * the upstream datarate. #GST_QOS_TYPE_UNDERFLOW is when the sink is not |
| * receiving buffers fast enough and thus has to drop late buffers. |
| * #GST_QOS_TYPE_THROTTLE is used when the datarate is artificially limited |
| * by the application, for example to reduce power consumption. |
| * |
| * @proportion indicates the real-time performance of the streaming in the |
| * element that generated the QoS event (usually the sink). The value is |
| * generally computed based on more long term statistics about the streams |
| * timestamps compared to the clock. |
| * A value < 1.0 indicates that the upstream element is producing data faster |
| * than real-time. A value > 1.0 indicates that the upstream element is not |
| * producing data fast enough. 1.0 is the ideal @proportion value. The |
| * proportion value can safely be used to lower or increase the quality of |
| * the element. |
| * |
| * @diff is the difference against the clock in running time of the last |
| * buffer that caused the element to generate the QOS event. A negative value |
| * means that the buffer with @timestamp arrived in time. A positive value |
| * indicates how late the buffer with @timestamp was. When throttling is |
| * enabled, @diff will be set to the requested throttling interval. |
| * |
| * @timestamp is the timestamp of the last buffer that cause the element |
| * to generate the QOS event. It is expressed in running time and thus an ever |
| * increasing value. |
| * |
| * The upstream element can use the @diff and @timestamp values to decide |
| * whether to process more buffers. For positive @diff, all buffers with |
| * timestamp <= @timestamp + @diff will certainly arrive late in the sink |
| * as well. A (negative) @diff value so that @timestamp + @diff would yield a |
| * result smaller than 0 is not allowed. |
| * |
| * The application can use general event probes to intercept the QoS |
| * event and implement custom application specific QoS handling. |
| * |
| * Returns: (transfer full): a new QOS event. |
| */ |
| GstEvent * |
| gst_event_new_qos (GstQOSType type, gdouble proportion, |
| GstClockTimeDiff diff, GstClockTime timestamp) |
| { |
| GstEvent *event; |
| GstStructure *structure; |
| |
| /* diff must be positive or timestamp + diff must be positive */ |
| g_return_val_if_fail (diff >= 0 || -diff <= timestamp, NULL); |
| |
| GST_CAT_LOG (GST_CAT_EVENT, |
| "creating qos type %d, proportion %lf, diff %" G_GINT64_FORMAT |
| ", timestamp %" GST_TIME_FORMAT, type, proportion, |
| diff, GST_TIME_ARGS (timestamp)); |
| |
| structure = gst_structure_new_id (GST_QUARK (EVENT_QOS), |
| GST_QUARK (TYPE), GST_TYPE_QOS_TYPE, type, |
| GST_QUARK (PROPORTION), G_TYPE_DOUBLE, proportion, |
| GST_QUARK (DIFF), G_TYPE_INT64, diff, |
| GST_QUARK (TIMESTAMP), G_TYPE_UINT64, timestamp, NULL); |
| event = gst_event_new_custom (GST_EVENT_QOS, structure); |
| |
| return event; |
| } |
| |
| /** |
| * gst_event_parse_qos: |
| * @event: The event to query |
| * @type: (out): A pointer to store the QoS type in |
| * @proportion: (out): A pointer to store the proportion in |
| * @diff: (out): A pointer to store the diff in |
| * @timestamp: (out): A pointer to store the timestamp in |
| * |
| * Get the type, proportion, diff and timestamp in the qos event. See |
| * gst_event_new_qos() for more information about the different QoS values. |
| * |
| * @timestamp will be adjusted for any pad offsets of pads it was passing through. |
| */ |
| void |
| gst_event_parse_qos (GstEvent * event, GstQOSType * type, |
| gdouble * proportion, GstClockTimeDiff * diff, GstClockTime * timestamp) |
| { |
| const GstStructure *structure; |
| |
| g_return_if_fail (GST_IS_EVENT (event)); |
| g_return_if_fail (GST_EVENT_TYPE (event) == GST_EVENT_QOS); |
| |
| structure = GST_EVENT_STRUCTURE (event); |
| if (type) |
| *type = (GstQOSType) |
| g_value_get_enum (gst_structure_id_get_value (structure, |
| GST_QUARK (TYPE))); |
| if (proportion) |
| *proportion = |
| g_value_get_double (gst_structure_id_get_value (structure, |
| GST_QUARK (PROPORTION))); |
| if (diff) |
| *diff = |
| g_value_get_int64 (gst_structure_id_get_value (structure, |
| GST_QUARK (DIFF))); |
| if (timestamp) { |
| gint64 offset = gst_event_get_running_time_offset (event); |
| |
| *timestamp = |
| g_value_get_uint64 (gst_structure_id_get_value (structure, |
| GST_QUARK (TIMESTAMP))); |
| /* Catch underflows */ |
| if (*timestamp > -offset) |
| *timestamp += offset; |
| else |
| *timestamp = 0; |
| } |
| } |
| |
| /** |
| * gst_event_new_seek: |
| * @rate: The new playback rate |
| * @format: The format of the seek values |
| * @flags: The optional seek flags |
| * @start_type: The type and flags for the new start position |
| * @start: The value of the new start position |
| * @stop_type: The type and flags for the new stop position |
| * @stop: The value of the new stop position |
| * |
| * Allocate a new seek event with the given parameters. |
| * |
| * The seek event configures playback of the pipeline between @start to @stop |
| * at the speed given in @rate, also called a playback segment. |
| * The @start and @stop values are expressed in @format. |
| * |
| * A @rate of 1.0 means normal playback rate, 2.0 means double speed. |
| * Negatives values means backwards playback. A value of 0.0 for the |
| * rate is not allowed and should be accomplished instead by PAUSING the |
| * pipeline. |
| * |
| * A pipeline has a default playback segment configured with a start |
| * position of 0, a stop position of -1 and a rate of 1.0. The currently |
| * configured playback segment can be queried with #GST_QUERY_SEGMENT. |
| * |
| * @start_type and @stop_type specify how to adjust the currently configured |
| * start and stop fields in playback segment. Adjustments can be made relative |
| * or absolute to the last configured values. A type of #GST_SEEK_TYPE_NONE |
| * means that the position should not be updated. |
| * |
| * When the rate is positive and @start has been updated, playback will start |
| * from the newly configured start position. |
| * |
| * For negative rates, playback will start from the newly configured stop |
| * position (if any). If the stop position is updated, it must be different from |
| * -1 (#GST_CLOCK_TIME_NONE) for negative rates. |
| * |
| * It is not possible to seek relative to the current playback position, to do |
| * this, PAUSE the pipeline, query the current playback position with |
| * #GST_QUERY_POSITION and update the playback segment current position with a |
| * #GST_SEEK_TYPE_SET to the desired position. |
| * |
| * Returns: (transfer full): a new seek event. |
| */ |
| GstEvent * |
| gst_event_new_seek (gdouble rate, GstFormat format, GstSeekFlags flags, |
| GstSeekType start_type, gint64 start, GstSeekType stop_type, gint64 stop) |
| { |
| GstEvent *event; |
| GstStructure *structure; |
| |
| g_return_val_if_fail (rate != 0.0, NULL); |
| |
| if (format == GST_FORMAT_TIME) { |
| GST_CAT_INFO (GST_CAT_EVENT, |
| "creating seek rate %lf, format TIME, flags %d, " |
| "start_type %d, start %" GST_TIME_FORMAT ", " |
| "stop_type %d, stop %" GST_TIME_FORMAT, |
| rate, flags, start_type, GST_TIME_ARGS (start), |
| stop_type, GST_TIME_ARGS (stop)); |
| } else { |
| GST_CAT_INFO (GST_CAT_EVENT, |
| "creating seek rate %lf, format %s, flags %d, " |
| "start_type %d, start %" G_GINT64_FORMAT ", " |
| "stop_type %d, stop %" G_GINT64_FORMAT, |
| rate, gst_format_get_name (format), flags, start_type, start, stop_type, |
| stop); |
| } |
| |
| structure = gst_structure_new_id (GST_QUARK (EVENT_SEEK), |
| GST_QUARK (RATE), G_TYPE_DOUBLE, rate, |
| GST_QUARK (FORMAT), GST_TYPE_FORMAT, format, |
| GST_QUARK (FLAGS), GST_TYPE_SEEK_FLAGS, flags, |
| GST_QUARK (CUR_TYPE), GST_TYPE_SEEK_TYPE, start_type, |
| GST_QUARK (CUR), G_TYPE_INT64, start, |
| GST_QUARK (STOP_TYPE), GST_TYPE_SEEK_TYPE, stop_type, |
| GST_QUARK (STOP), G_TYPE_INT64, stop, NULL); |
| event = gst_event_new_custom (GST_EVENT_SEEK, structure); |
| |
| return event; |
| } |
| |
| /** |
| * gst_event_parse_seek: |
| * @event: a seek event |
| * @rate: (out): result location for the rate |
| * @format: (out): result location for the stream format |
| * @flags: (out): result location for the #GstSeekFlags |
| * @start_type: (out): result location for the #GstSeekType of the start position |
| * @start: (out): result location for the start position expressed in @format |
| * @stop_type: (out): result location for the #GstSeekType of the stop position |
| * @stop: (out): result location for the stop position expressed in @format |
| * |
| * Parses a seek @event and stores the results in the given result locations. |
| */ |
| void |
| gst_event_parse_seek (GstEvent * event, gdouble * rate, |
| GstFormat * format, GstSeekFlags * flags, GstSeekType * start_type, |
| gint64 * start, GstSeekType * stop_type, gint64 * stop) |
| { |
| const GstStructure *structure; |
| |
| g_return_if_fail (GST_IS_EVENT (event)); |
| g_return_if_fail (GST_EVENT_TYPE (event) == GST_EVENT_SEEK); |
| |
| structure = GST_EVENT_STRUCTURE (event); |
| if (rate) |
| *rate = |
| g_value_get_double (gst_structure_id_get_value (structure, |
| GST_QUARK (RATE))); |
| if (format) |
| *format = (GstFormat) |
| g_value_get_enum (gst_structure_id_get_value (structure, |
| GST_QUARK (FORMAT))); |
| if (flags) |
| *flags = (GstSeekFlags) |
| g_value_get_flags (gst_structure_id_get_value (structure, |
| GST_QUARK (FLAGS))); |
| if (start_type) |
| *start_type = (GstSeekType) |
| g_value_get_enum (gst_structure_id_get_value (structure, |
| GST_QUARK (CUR_TYPE))); |
| if (start) |
| *start = |
| g_value_get_int64 (gst_structure_id_get_value (structure, |
| GST_QUARK (CUR))); |
| if (stop_type) |
| *stop_type = (GstSeekType) |
| g_value_get_enum (gst_structure_id_get_value (structure, |
| GST_QUARK (STOP_TYPE))); |
| if (stop) |
| *stop = |
| g_value_get_int64 (gst_structure_id_get_value (structure, |
| GST_QUARK (STOP))); |
| } |
| |
| /** |
| * gst_event_new_navigation: |
| * @structure: (transfer full): description of the event. The event will take |
| * ownership of the structure. |
| * |
| * Create a new navigation event from the given description. |
| * |
| * Returns: (transfer full): a new #GstEvent |
| */ |
| GstEvent * |
| gst_event_new_navigation (GstStructure * structure) |
| { |
| g_return_val_if_fail (structure != NULL, NULL); |
| |
| return gst_event_new_custom (GST_EVENT_NAVIGATION, structure); |
| } |
| |
| /** |
| * gst_event_new_latency: |
| * @latency: the new latency value |
| * |
| * Create a new latency event. The event is sent upstream from the sinks and |
| * notifies elements that they should add an additional @latency to the |
| * running time before synchronising against the clock. |
| * |
| * The latency is mostly used in live sinks and is always expressed in |
| * the time format. |
| * |
| * Returns: (transfer full): a new #GstEvent |
| */ |
| GstEvent * |
| gst_event_new_latency (GstClockTime latency) |
| { |
| GstEvent *event; |
| GstStructure *structure; |
| |
| GST_CAT_INFO (GST_CAT_EVENT, |
| "creating latency event %" GST_TIME_FORMAT, GST_TIME_ARGS (latency)); |
| |
| structure = gst_structure_new_id (GST_QUARK (EVENT_LATENCY), |
| GST_QUARK (LATENCY), G_TYPE_UINT64, latency, NULL); |
| event = gst_event_new_custom (GST_EVENT_LATENCY, structure); |
| |
| return event; |
| } |
| |
| /** |
| * gst_event_parse_latency: |
| * @event: The event to query |
| * @latency: (out): A pointer to store the latency in. |
| * |
| * Get the latency in the latency event. |
| */ |
| void |
| gst_event_parse_latency (GstEvent * event, GstClockTime * latency) |
| { |
| g_return_if_fail (GST_IS_EVENT (event)); |
| g_return_if_fail (GST_EVENT_TYPE (event) == GST_EVENT_LATENCY); |
| |
| if (latency) |
| *latency = |
| g_value_get_uint64 (gst_structure_id_get_value (GST_EVENT_STRUCTURE |
| (event), GST_QUARK (LATENCY))); |
| } |
| |
| /** |
| * gst_event_new_step: |
| * @format: the format of @amount |
| * @amount: the amount of data to step |
| * @rate: the step rate |
| * @flush: flushing steps |
| * @intermediate: intermediate steps |
| * |
| * Create a new step event. The purpose of the step event is to instruct a sink |
| * to skip @amount (expressed in @format) of media. It can be used to implement |
| * stepping through the video frame by frame or for doing fast trick modes. |
| * |
| * A rate of <= 0.0 is not allowed. Pause the pipeline, for the effect of rate |
| * = 0.0 or first reverse the direction of playback using a seek event to get |
| * the same effect as rate < 0.0. |
| * |
| * The @flush flag will clear any pending data in the pipeline before starting |
| * the step operation. |
| * |
| * The @intermediate flag instructs the pipeline that this step operation is |
| * part of a larger step operation. |
| * |
| * Returns: (transfer full): a new #GstEvent |
| */ |
| GstEvent * |
| gst_event_new_step (GstFormat format, guint64 amount, gdouble rate, |
| gboolean flush, gboolean intermediate) |
| { |
| GstEvent *event; |
| GstStructure *structure; |
| |
| g_return_val_if_fail (rate > 0.0, NULL); |
| |
| GST_CAT_INFO (GST_CAT_EVENT, "creating step event"); |
| |
| structure = gst_structure_new_id (GST_QUARK (EVENT_STEP), |
| GST_QUARK (FORMAT), GST_TYPE_FORMAT, format, |
| GST_QUARK (AMOUNT), G_TYPE_UINT64, amount, |
| GST_QUARK (RATE), G_TYPE_DOUBLE, rate, |
| GST_QUARK (FLUSH), G_TYPE_BOOLEAN, flush, |
| GST_QUARK (INTERMEDIATE), G_TYPE_BOOLEAN, intermediate, NULL); |
| event = gst_event_new_custom (GST_EVENT_STEP, structure); |
| |
| return event; |
| } |
| |
| /** |
| * gst_event_parse_step: |
| * @event: The event to query |
| * @format: (out) (allow-none): a pointer to store the format in |
| * @amount: (out) (allow-none): a pointer to store the amount in |
| * @rate: (out) (allow-none): a pointer to store the rate in |
| * @flush: (out) (allow-none): a pointer to store the flush boolean in |
| * @intermediate: (out) (allow-none): a pointer to store the intermediate |
| * boolean in |
| * |
| * Parse the step event. |
| */ |
| void |
| gst_event_parse_step (GstEvent * event, GstFormat * format, guint64 * amount, |
| gdouble * rate, gboolean * flush, gboolean * intermediate) |
| { |
| const GstStructure *structure; |
| |
| g_return_if_fail (GST_IS_EVENT (event)); |
| g_return_if_fail (GST_EVENT_TYPE (event) == GST_EVENT_STEP); |
| |
| structure = GST_EVENT_STRUCTURE (event); |
| if (format) |
| *format = |
| (GstFormat) g_value_get_enum (gst_structure_id_get_value (structure, |
| GST_QUARK (FORMAT))); |
| if (amount) |
| *amount = g_value_get_uint64 (gst_structure_id_get_value (structure, |
| GST_QUARK (AMOUNT))); |
| if (rate) |
| *rate = g_value_get_double (gst_structure_id_get_value (structure, |
| GST_QUARK (RATE))); |
| if (flush) |
| *flush = g_value_get_boolean (gst_structure_id_get_value (structure, |
| GST_QUARK (FLUSH))); |
| if (intermediate) |
| *intermediate = g_value_get_boolean (gst_structure_id_get_value (structure, |
| GST_QUARK (INTERMEDIATE))); |
| } |
| |
| /** |
| * gst_event_new_reconfigure: |
| |
| * Create a new reconfigure event. The purpose of the reconfigure event is |
| * to travel upstream and make elements renegotiate their caps or reconfigure |
| * their buffer pools. This is useful when changing properties on elements |
| * or changing the topology of the pipeline. |
| * |
| * Returns: (transfer full): a new #GstEvent |
| */ |
| GstEvent * |
| gst_event_new_reconfigure (void) |
| { |
| GstEvent *event; |
| |
| GST_CAT_INFO (GST_CAT_EVENT, "creating reconfigure event"); |
| |
| event = gst_event_new_custom (GST_EVENT_RECONFIGURE, NULL); |
| |
| return event; |
| } |
| |
| /** |
| * gst_event_new_sink_message: |
| * @name: a name for the event |
| * @msg: (transfer none): the #GstMessage to be posted |
| * |
| * Create a new sink-message event. The purpose of the sink-message event is |
| * to instruct a sink to post the message contained in the event synchronized |
| * with the stream. |
| * |
| * @name is used to store multiple sticky events on one pad. |
| * |
| * Returns: (transfer full): a new #GstEvent |
| */ |
| /* FIXME 2.0: take ownership of msg for consistency? */ |
| GstEvent * |
| gst_event_new_sink_message (const gchar * name, GstMessage * msg) |
| { |
| GstEvent *event; |
| GstStructure *structure; |
| |
| g_return_val_if_fail (msg != NULL, NULL); |
| |
| GST_CAT_INFO (GST_CAT_EVENT, "creating sink-message event"); |
| |
| structure = gst_structure_new_id (g_quark_from_string (name), |
| GST_QUARK (MESSAGE), GST_TYPE_MESSAGE, msg, NULL); |
| event = gst_event_new_custom (GST_EVENT_SINK_MESSAGE, structure); |
| |
| return event; |
| } |
| |
| /** |
| * gst_event_parse_sink_message: |
| * @event: The event to query |
| * @msg: (out) (transfer full): a pointer to store the #GstMessage in. |
| * |
| * Parse the sink-message event. Unref @msg after usage. |
| */ |
| void |
| gst_event_parse_sink_message (GstEvent * event, GstMessage ** msg) |
| { |
| const GstStructure *structure; |
| |
| g_return_if_fail (GST_IS_EVENT (event)); |
| g_return_if_fail (GST_EVENT_TYPE (event) == GST_EVENT_SINK_MESSAGE); |
| |
| structure = GST_EVENT_STRUCTURE (event); |
| if (msg) |
| *msg = |
| GST_MESSAGE (g_value_dup_boxed (gst_structure_id_get_value |
| (structure, GST_QUARK (MESSAGE)))); |
| } |
| |
| /** |
| * gst_event_new_stream_start: |
| * @stream_id: Identifier for this stream |
| * |
| * Create a new STREAM_START event. The stream start event can only |
| * travel downstream synchronized with the buffer flow. It is expected |
| * to be the first event that is sent for a new stream. |
| * |
| * Source elements, demuxers and other elements that create new streams |
| * are supposed to send this event as the first event of a new stream. It |
| * should not be sent after a flushing seek or in similar situations |
| * and is used to mark the beginning of a new logical stream. Elements |
| * combining multiple streams must ensure that this event is only forwarded |
| * downstream once and not for every single input stream. |
| * |
| * The @stream_id should be a unique string that consists of the upstream |
| * stream-id, / as separator and a unique stream-id for this specific |
| * stream. A new stream-id should only be created for a stream if the upstream |
| * stream is split into (potentially) multiple new streams, e.g. in a demuxer, |
| * but not for every single element in the pipeline. |
| * gst_pad_create_stream_id() or gst_pad_create_stream_id_printf() can be |
| * used to create a stream-id. |
| * |
| * Returns: (transfer full): the new STREAM_START event. |
| */ |
| GstEvent * |
| gst_event_new_stream_start (const gchar * stream_id) |
| { |
| GstStructure *s; |
| |
| g_return_val_if_fail (stream_id != NULL, NULL); |
| |
| s = gst_structure_new_id (GST_QUARK (EVENT_STREAM_START), |
| GST_QUARK (STREAM_ID), G_TYPE_STRING, stream_id, |
| GST_QUARK (FLAGS), GST_TYPE_STREAM_FLAGS, GST_STREAM_FLAG_NONE, NULL); |
| |
| return gst_event_new_custom (GST_EVENT_STREAM_START, s); |
| } |
| |
| /** |
| * gst_event_parse_stream_start: |
| * @event: a stream-start event. |
| * @stream_id: (out) (transfer none): pointer to store the stream-id |
| * |
| * Parse a stream-id @event and store the result in the given @stream_id |
| * location. The string stored in @stream_id must not be modified and will |
| * remain valid only until @event gets freed. Make a copy if you want to |
| * modify it or store it for later use. |
| */ |
| void |
| gst_event_parse_stream_start (GstEvent * event, const gchar ** stream_id) |
| { |
| const GstStructure *structure; |
| const GValue *val; |
| |
| g_return_if_fail (event != NULL); |
| g_return_if_fail (GST_EVENT_TYPE (event) == GST_EVENT_STREAM_START); |
| |
| structure = gst_event_get_structure (event); |
| val = gst_structure_id_get_value (structure, GST_QUARK (STREAM_ID)); |
| |
| if (stream_id) |
| *stream_id = g_value_get_string (val); |
| } |
| |
| /** |
| * gst_event_set_stream_flags: |
| * @event: a stream-start event |
| * @flags: the stream flags to set |
| * |
| * Since: 1.2 |
| */ |
| void |
| gst_event_set_stream_flags (GstEvent * event, GstStreamFlags flags) |
| { |
| g_return_if_fail (event != NULL); |
| g_return_if_fail (GST_EVENT_TYPE (event) == GST_EVENT_STREAM_START); |
| g_return_if_fail (gst_event_is_writable (event)); |
| |
| gst_structure_id_set (GST_EVENT_STRUCTURE (event), |
| GST_QUARK (FLAGS), GST_TYPE_STREAM_FLAGS, flags, NULL); |
| } |
| |
| /** |
| * gst_event_parse_stream_flags: |
| * @event: a stream-start event |
| * @flags: (out): address of variable where to store the stream flags |
| * |
| * Since: 1.2 |
| */ |
| void |
| gst_event_parse_stream_flags (GstEvent * event, GstStreamFlags * flags) |
| { |
| g_return_if_fail (event != NULL); |
| g_return_if_fail (GST_EVENT_TYPE (event) == GST_EVENT_STREAM_START); |
| |
| if (flags) { |
| gst_structure_id_get (GST_EVENT_STRUCTURE (event), |
| GST_QUARK (FLAGS), GST_TYPE_STREAM_FLAGS, flags, NULL); |
| } |
| } |
| |
| /** |
| * gst_event_set_group_id: |
| * @event: a stream-start event |
| * @group_id: the group id to set |
| * |
| * All streams that have the same group id are supposed to be played |
| * together, i.e. all streams inside a container file should have the |
| * same group id but different stream ids. The group id should change |
| * each time the stream is started, resulting in different group ids |
| * each time a file is played for example. |
| * |
| * Use gst_util_group_id_next() to get a new group id. |
| * |
| * Since: 1.2 |
| */ |
| void |
| gst_event_set_group_id (GstEvent * event, guint group_id) |
| { |
| g_return_if_fail (event != NULL); |
| g_return_if_fail (GST_EVENT_TYPE (event) == GST_EVENT_STREAM_START); |
| g_return_if_fail (gst_event_is_writable (event)); |
| |
| gst_structure_id_set (GST_EVENT_STRUCTURE (event), |
| GST_QUARK (GROUP_ID), G_TYPE_UINT, group_id, NULL); |
| } |
| |
| /** |
| * gst_event_parse_group_id: |
| * @event: a stream-start event |
| * @group_id: (out): address of variable where to store the group id |
| * |
| * Returns: %TRUE if a group id was set on the event and could be parsed, |
| * %FALSE otherwise. |
| * |
| * Since: 1.2 |
| */ |
| gboolean |
| gst_event_parse_group_id (GstEvent * event, guint * group_id) |
| { |
| g_return_val_if_fail (event != NULL, FALSE); |
| g_return_val_if_fail (GST_EVENT_TYPE (event) == GST_EVENT_STREAM_START, |
| FALSE); |
| |
| if (group_id) { |
| return gst_structure_id_get (GST_EVENT_STRUCTURE (event), |
| GST_QUARK (GROUP_ID), G_TYPE_UINT, group_id, NULL); |
| } |
| |
| return TRUE; |
| } |
| |
| /** |
| * gst_event_new_toc: |
| * @toc: (transfer none): #GstToc structure. |
| * @updated: whether @toc was updated or not. |
| * |
| * Generate a TOC event from the given @toc. The purpose of the TOC event is to |
| * inform elements that some kind of the TOC was found. |
| * |
| * Returns: (transfer full): a new #GstEvent. |
| */ |
| GstEvent * |
| gst_event_new_toc (GstToc * toc, gboolean updated) |
| { |
| GstStructure *toc_struct; |
| GQuark id; |
| |
| g_return_val_if_fail (toc != NULL, NULL); |
| |
| GST_CAT_INFO (GST_CAT_EVENT, "creating toc event"); |
| |
| /* need different structure names so sticky_multi event stuff on pads |
| * works, i.e. both TOC events are kept around */ |
| if (gst_toc_get_scope (toc) == GST_TOC_SCOPE_GLOBAL) |
| id = GST_QUARK (EVENT_TOC_GLOBAL); |
| else |
| id = GST_QUARK (EVENT_TOC_CURRENT); |
| |
| toc_struct = gst_structure_new_id (id, |
| GST_QUARK (TOC), GST_TYPE_TOC, toc, |
| GST_QUARK (UPDATED), G_TYPE_BOOLEAN, updated, NULL); |
| |
| return gst_event_new_custom (GST_EVENT_TOC, toc_struct); |
| } |
| |
| /** |
| * gst_event_parse_toc: |
| * @event: a TOC event. |
| * @toc: (out) (transfer full): pointer to #GstToc structure. |
| * @updated: (out): pointer to store TOC updated flag. |
| * |
| * Parse a TOC @event and store the results in the given @toc and @updated locations. |
| */ |
| void |
| gst_event_parse_toc (GstEvent * event, GstToc ** toc, gboolean * updated) |
| { |
| const GstStructure *structure; |
| |
| g_return_if_fail (event != NULL); |
| g_return_if_fail (GST_EVENT_TYPE (event) == GST_EVENT_TOC); |
| g_return_if_fail (toc != NULL); |
| |
| structure = gst_event_get_structure (event); |
| |
| gst_structure_id_get (structure, |
| GST_QUARK (TOC), GST_TYPE_TOC, toc, |
| GST_QUARK (UPDATED), G_TYPE_BOOLEAN, updated, NULL); |
| } |
| |
| /** |
| * gst_event_new_toc_select: |
| * @uid: UID in the TOC to start playback from. |
| * |
| * Generate a TOC select event with the given @uid. The purpose of the |
| * TOC select event is to start playback based on the TOC's entry with the |
| * given @uid. |
| * |
| * Returns: a new #GstEvent. |
| */ |
| GstEvent * |
| gst_event_new_toc_select (const gchar * uid) |
| { |
| GstStructure *structure; |
| |
| g_return_val_if_fail (uid != NULL, NULL); |
| |
| GST_CAT_INFO (GST_CAT_EVENT, "creating toc select event for UID: %s", uid); |
| |
| structure = gst_structure_new_id (GST_QUARK (EVENT_TOC_SELECT), |
| GST_QUARK (UID), G_TYPE_STRING, uid, NULL); |
| |
| return gst_event_new_custom (GST_EVENT_TOC_SELECT, structure); |
| } |
| |
| /** |
| * gst_event_parse_toc_select: |
| * @event: a TOC select event. |
| * @uid: (out) (transfer full) (allow-none): storage for the selection UID. |
| * |
| * Parse a TOC select @event and store the results in the given @uid location. |
| */ |
| void |
| gst_event_parse_toc_select (GstEvent * event, gchar ** uid) |
| { |
| const GstStructure *structure; |
| const GValue *val; |
| |
| g_return_if_fail (event != NULL); |
| g_return_if_fail (GST_EVENT_TYPE (event) == GST_EVENT_TOC_SELECT); |
| |
| structure = gst_event_get_structure (event); |
| val = gst_structure_id_get_value (structure, GST_QUARK (UID)); |
| |
| if (uid != NULL) |
| *uid = g_strdup (g_value_get_string (val)); |
| |
| } |
| |
| /** |
| * SECTION:gstprotectionevent |
| * @short_description: Functions to support the passing of |
| * protection system specific information via events. |
| * |
| * In order for a decryption element to decrypt media |
| * protected using a specific system, it first needs all the |
| * protection system specific information necessary to acquire the decryption |
| * key(s) for that stream. The functions defined here enable this information |
| * to be passed in events from elements that extract it |
| * (e.g., ISOBMFF demuxers, MPEG DASH demuxers) to protection decrypter |
| * elements that use it. |
| * |
| * Events containing protection system specific information are created using |
| * #gst_event_new_protection, and they can be parsed by downstream elements |
| * using #gst_event_parse_protection. |
| * |
| * In Common Encryption, protection system specific information may be located |
| * within ISOBMFF files, both in movie (moov) boxes and movie fragment (moof) |
| * boxes; it may also be contained in ContentProtection elements within MPEG |
| * DASH MPDs. The events created by #gst_event_new_protection contain data |
| * identifying from which of these locations the encapsulated protection system |
| * specific information originated. This origin information is required as |
| * some protection systems use different encodings depending upon where the |
| * information originates. |
| * |
| * The events returned by #gst_event_new_protection are implemented |
| * in such a way as to ensure that the most recently-pushed protection info |
| * event of a particular @origin and @system_id will |
| * be stuck to the output pad of the sending element. |
| * |
| * Since: 1.6 |
| */ |
| |
| /** |
| * gst_event_new_protection: |
| * @system_id: (transfer none): a string holding a UUID that uniquely |
| * identifies a protection system. |
| * @data: (transfer none): a #GstBuffer holding protection system specific |
| * information. The reference count of the buffer will be incremented by one. |
| * @origin: a string indicating where the protection |
| * information carried in the event was extracted from. The allowed values |
| * of this string will depend upon the protection scheme. |
| * |
| * Creates a new event containing information specific to a particular |
| * protection system (uniquely identified by @system_id), by which that |
| * protection system can acquire key(s) to decrypt a protected stream. |
| * |
| * Returns: a #GST_EVENT_PROTECTION event, if successful; %NULL |
| * if unsuccessful. |
| * |
| * Since: 1.6 |
| */ |
| GstEvent * |
| gst_event_new_protection (const gchar * system_id, |
| GstBuffer * data, const gchar * origin) |
| { |
| gchar *event_name; |
| GstEvent *event; |
| GstStructure *s; |
| |
| g_return_val_if_fail (system_id != NULL, NULL); |
| g_return_val_if_fail (data != NULL, NULL); |
| |
| event_name = |
| g_strconcat ("GstProtectionEvent", origin ? "-" : "", |
| origin ? origin : "", "-", system_id, NULL); |
| |
| GST_CAT_INFO (GST_CAT_EVENT, "creating protection event %s", event_name); |
| |
| s = gst_structure_new (event_name, "data", GST_TYPE_BUFFER, data, |
| "system_id", G_TYPE_STRING, system_id, NULL); |
| if (origin) |
| gst_structure_set (s, "origin", G_TYPE_STRING, origin, NULL); |
| event = gst_event_new_custom (GST_EVENT_PROTECTION, s); |
| |
| g_free (event_name); |
| return event; |
| } |
| |
| /** |
| * gst_event_parse_protection: |
| * @event: a #GST_EVENT_PROTECTION event. |
| * @system_id: (out) (allow-none) (transfer none): pointer to store the UUID |
| * string uniquely identifying a content protection system. |
| * @data: (out) (allow-none) (transfer none): pointer to store a #GstBuffer |
| * holding protection system specific information. |
| * @origin: (allow-none) (transfer none): pointer to store a value that |
| * indicates where the protection information carried by @event was extracted |
| * from. |
| * |
| * Parses an event containing protection system specific information and stores |
| * the results in @system_id, @data and @origin. The data stored in @system_id, |
| * @origin and @data are valid until @event is released. |
| * |
| * Since: 1.6 |
| */ |
| void |
| gst_event_parse_protection (GstEvent * event, const gchar ** system_id, |
| GstBuffer ** data, const gchar ** origin) |
| { |
| const GstStructure *s; |
| |
| g_return_if_fail (event != NULL); |
| g_return_if_fail (GST_IS_EVENT (event)); |
| g_return_if_fail (GST_EVENT_TYPE (event) == GST_EVENT_PROTECTION); |
| |
| s = gst_event_get_structure (event); |
| |
| if (origin) |
| *origin = gst_structure_get_string (s, "origin"); |
| |
| if (system_id) |
| *system_id = gst_structure_get_string (s, "system_id"); |
| |
| if (data) { |
| const GValue *value = gst_structure_get_value (s, "data"); |
| *data = gst_value_get_buffer (value); |
| } |
| } |
| |
| /** |
| * gst_event_new_segment_done: |
| * @format: The format of the position being done |
| * @position: The position of the segment being done |
| * |
| * Create a new segment-done event. This event is sent by elements that |
| * finish playback of a segment as a result of a segment seek. |
| * |
| * Returns: (transfer full): a new #GstEvent |
| */ |
| GstEvent * |
| gst_event_new_segment_done (GstFormat format, gint64 position) |
| { |
| GstEvent *event; |
| GstStructure *structure; |
| |
| GST_CAT_INFO (GST_CAT_EVENT, "creating segment-done event"); |
| |
| structure = gst_structure_new_id (GST_QUARK (EVENT_SEGMENT_DONE), |
| GST_QUARK (FORMAT), GST_TYPE_FORMAT, format, |
| GST_QUARK (POSITION), G_TYPE_INT64, position, NULL); |
| |
| event = gst_event_new_custom (GST_EVENT_SEGMENT_DONE, structure); |
| |
| return event; |
| } |
| |
| /** |
| * gst_event_parse_segment_done: |
| * @event: A valid #GstEvent of type GST_EVENT_SEGMENT_DONE. |
| * @format: (out) (allow-none): Result location for the format, or %NULL |
| * @position: (out) (allow-none): Result location for the position, or %NULL |
| * |
| * Extracts the position and format from the segment done message. |
| * |
| */ |
| void |
| gst_event_parse_segment_done (GstEvent * event, GstFormat * format, |
| gint64 * position) |
| { |
| const GstStructure *structure; |
| const GValue *val; |
| |
| g_return_if_fail (event != NULL); |
| g_return_if_fail (GST_EVENT_TYPE (event) == GST_EVENT_SEGMENT_DONE); |
| |
| structure = gst_event_get_structure (event); |
| |
| val = gst_structure_id_get_value (structure, GST_QUARK (FORMAT)); |
| if (format != NULL) |
| *format = g_value_get_enum (val); |
| |
| val = gst_structure_id_get_value (structure, GST_QUARK (POSITION)); |
| if (position != NULL) |
| *position = g_value_get_int64 (val); |
| } |