| # Makefile.in generated by automake 1.14.1 from Makefile.am. |
| # @configure_input@ |
| |
| # Copyright (C) 1994-2013 Free Software Foundation, Inc. |
| |
| # This Makefile.in is free software; the Free Software Foundation |
| # gives unlimited permission to copy and/or distribute it, |
| # with or without modifications, as long as this notice is preserved. |
| |
| # This program is distributed in the hope that it will be useful, |
| # but WITHOUT ANY WARRANTY, to the extent permitted by law; without |
| # even the implied warranty of MERCHANTABILITY or FITNESS FOR A |
| # PARTICULAR PURPOSE. |
| |
| @SET_MAKE@ |
| |
| # various tests to make sure we dist the win32 stuff (for MSVC builds) right |
| |
| # include this snippet to add a common release: target by using |
| # include $(top_srcdir)/common/release.mak |
| |
| # checks for left-over files in the (usually uninstalled) tree, ie. for |
| # stuff that best be deleted to avoid problems like having old plugin binaries |
| # lying around. |
| # |
| # set CRUFT_FILES and/or CRUFT_DIRS in your Makefile.am when you include this |
| |
| VPATH = @srcdir@ |
| am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)' |
| am__make_running_with_option = \ |
| case $${target_option-} in \ |
| ?) ;; \ |
| *) echo "am__make_running_with_option: internal error: invalid" \ |
| "target option '$${target_option-}' specified" >&2; \ |
| exit 1;; \ |
| esac; \ |
| has_opt=no; \ |
| sane_makeflags=$$MAKEFLAGS; \ |
| if $(am__is_gnu_make); then \ |
| sane_makeflags=$$MFLAGS; \ |
| else \ |
| case $$MAKEFLAGS in \ |
| *\\[\ \ ]*) \ |
| bs=\\; \ |
| sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ |
| | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ |
| esac; \ |
| fi; \ |
| skip_next=no; \ |
| strip_trailopt () \ |
| { \ |
| flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ |
| }; \ |
| for flg in $$sane_makeflags; do \ |
| test $$skip_next = yes && { skip_next=no; continue; }; \ |
| case $$flg in \ |
| *=*|--*) continue;; \ |
| -*I) strip_trailopt 'I'; skip_next=yes;; \ |
| -*I?*) strip_trailopt 'I';; \ |
| -*O) strip_trailopt 'O'; skip_next=yes;; \ |
| -*O?*) strip_trailopt 'O';; \ |
| -*l) strip_trailopt 'l'; skip_next=yes;; \ |
| -*l?*) strip_trailopt 'l';; \ |
| -[dEDm]) skip_next=yes;; \ |
| -[JT]) skip_next=yes;; \ |
| esac; \ |
| case $$flg in \ |
| *$$target_option*) has_opt=yes; break;; \ |
| esac; \ |
| done; \ |
| test $$has_opt = yes |
| am__make_dryrun = (target_option=n; $(am__make_running_with_option)) |
| am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) |
| pkgdatadir = $(datadir)/@PACKAGE@ |
| pkgincludedir = $(includedir)/@PACKAGE@ |
| pkglibdir = $(libdir)/@PACKAGE@ |
| pkglibexecdir = $(libexecdir)/@PACKAGE@ |
| am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd |
| install_sh_DATA = $(install_sh) -c -m 644 |
| install_sh_PROGRAM = $(install_sh) -c |
| install_sh_SCRIPT = $(install_sh) -c |
| INSTALL_HEADER = $(INSTALL_DATA) |
| transform = $(program_transform_name) |
| NORMAL_INSTALL = : |
| PRE_INSTALL = : |
| POST_INSTALL = : |
| NORMAL_UNINSTALL = : |
| PRE_UNINSTALL = : |
| POST_UNINSTALL = : |
| build_triplet = @build@ |
| host_triplet = @host@ |
| target_triplet = @target@ |
| DIST_COMMON = $(top_srcdir)/common/win32.mak \ |
| $(top_srcdir)/common/release.mak $(top_srcdir)/common/po.mak \ |
| $(top_srcdir)/common/coverage/lcov.mak \ |
| $(top_srcdir)/common/cruft.mak INSTALL NEWS README AUTHORS \ |
| ChangeLog $(srcdir)/Makefile.in $(srcdir)/Makefile.am \ |
| $(top_srcdir)/configure $(am__configure_deps) \ |
| $(srcdir)/config.h.in $(srcdir)/gst-plugins-good.spec.in \ |
| ABOUT-NLS $(noinst_HEADERS) COPYING compile config.guess \ |
| config.rpath config.sub depcomp install-sh missing ltmain.sh |
| subdir = . |
| ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 |
| am__aclocal_m4_deps = $(top_srcdir)/common/m4/as-ac-expand.m4 \ |
| $(top_srcdir)/common/m4/as-auto-alt.m4 \ |
| $(top_srcdir)/common/m4/as-compiler-flag.m4 \ |
| $(top_srcdir)/common/m4/as-gcc-inline-assembly.m4 \ |
| $(top_srcdir)/common/m4/as-libtool.m4 \ |
| $(top_srcdir)/common/m4/as-version.m4 \ |
| $(top_srcdir)/common/m4/ax_create_stdint_h.m4 \ |
| $(top_srcdir)/common/m4/gst-arch.m4 \ |
| $(top_srcdir)/common/m4/gst-args.m4 \ |
| $(top_srcdir)/common/m4/gst-check.m4 \ |
| $(top_srcdir)/common/m4/gst-default.m4 \ |
| $(top_srcdir)/common/m4/gst-dowhile.m4 \ |
| $(top_srcdir)/common/m4/gst-error.m4 \ |
| $(top_srcdir)/common/m4/gst-feature.m4 \ |
| $(top_srcdir)/common/m4/gst-gettext.m4 \ |
| $(top_srcdir)/common/m4/gst-glib2.m4 \ |
| $(top_srcdir)/common/m4/gst-package-release-datetime.m4 \ |
| $(top_srcdir)/common/m4/gst-platform.m4 \ |
| $(top_srcdir)/common/m4/gst-plugin-docs.m4 \ |
| $(top_srcdir)/common/m4/gst-plugindir.m4 \ |
| $(top_srcdir)/common/m4/gst-x11.m4 \ |
| $(top_srcdir)/common/m4/gst.m4 \ |
| $(top_srcdir)/common/m4/gtk-doc.m4 \ |
| $(top_srcdir)/common/m4/orc.m4 $(top_srcdir)/common/m4/pkg.m4 \ |
| $(top_srcdir)/m4/aalib.m4 $(top_srcdir)/m4/gettext.m4 \ |
| $(top_srcdir)/m4/gst-fionread.m4 $(top_srcdir)/m4/iconv.m4 \ |
| $(top_srcdir)/m4/intlmacosx.m4 $(top_srcdir)/m4/lib-ld.m4 \ |
| $(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \ |
| $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \ |
| $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \ |
| $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/nls.m4 \ |
| $(top_srcdir)/m4/po.m4 $(top_srcdir)/m4/progtest.m4 \ |
| $(top_srcdir)/configure.ac |
| am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ |
| $(ACLOCAL_M4) |
| am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ |
| configure.lineno config.status.lineno |
| mkinstalldirs = $(install_sh) -d |
| CONFIG_HEADER = config.h |
| CONFIG_CLEAN_FILES = gst-plugins-good.spec |
| CONFIG_CLEAN_VPATH_FILES = |
| AM_V_P = $(am__v_P_@AM_V@) |
| am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) |
| am__v_P_0 = false |
| am__v_P_1 = : |
| AM_V_GEN = $(am__v_GEN_@AM_V@) |
| am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) |
| am__v_GEN_0 = @echo " GEN " $@; |
| am__v_GEN_1 = |
| AM_V_at = $(am__v_at_@AM_V@) |
| am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) |
| am__v_at_0 = @ |
| am__v_at_1 = |
| SOURCES = |
| DIST_SOURCES = |
| RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \ |
| ctags-recursive dvi-recursive html-recursive info-recursive \ |
| install-data-recursive install-dvi-recursive \ |
| install-exec-recursive install-html-recursive \ |
| install-info-recursive install-pdf-recursive \ |
| install-ps-recursive install-recursive installcheck-recursive \ |
| installdirs-recursive pdf-recursive ps-recursive \ |
| tags-recursive uninstall-recursive |
| am__can_run_installinfo = \ |
| case $$AM_UPDATE_INFO_DIR in \ |
| n|no|NO) false;; \ |
| *) (install-info --version) >/dev/null 2>&1;; \ |
| esac |
| HEADERS = $(noinst_HEADERS) |
| RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ |
| distclean-recursive maintainer-clean-recursive |
| am__recursive_targets = \ |
| $(RECURSIVE_TARGETS) \ |
| $(RECURSIVE_CLEAN_TARGETS) \ |
| $(am__extra_recursive_targets) |
| AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \ |
| cscope distdir dist dist-all distcheck |
| am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \ |
| $(LISP)config.h.in |
| # Read a list of newline-separated strings from the standard input, |
| # and print each of them once, without duplicates. Input order is |
| # *not* preserved. |
| am__uniquify_input = $(AWK) '\ |
| BEGIN { nonempty = 0; } \ |
| { items[$$0] = 1; nonempty = 1; } \ |
| END { if (nonempty) { for (i in items) print i; }; } \ |
| ' |
| # Make sure the list of sources is unique. This is necessary because, |
| # e.g., the same source file might be shared among _SOURCES variables |
| # for different programs/libraries. |
| am__define_uniq_tagged_files = \ |
| list='$(am__tagged_files)'; \ |
| unique=`for i in $$list; do \ |
| if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ |
| done | $(am__uniquify_input)` |
| ETAGS = etags |
| CTAGS = ctags |
| CSCOPE = cscope |
| DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) |
| distdir = $(PACKAGE)-$(VERSION) |
| top_distdir = $(distdir) |
| am__remove_distdir = \ |
| if test -d "$(distdir)"; then \ |
| find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \ |
| && rm -rf "$(distdir)" \ |
| || { sleep 5 && rm -rf "$(distdir)"; }; \ |
| else :; fi |
| am__post_remove_distdir = $(am__remove_distdir) |
| am__relativize = \ |
| dir0=`pwd`; \ |
| sed_first='s,^\([^/]*\)/.*$$,\1,'; \ |
| sed_rest='s,^[^/]*/*,,'; \ |
| sed_last='s,^.*/\([^/]*\)$$,\1,'; \ |
| sed_butlast='s,/*[^/]*$$,,'; \ |
| while test -n "$$dir1"; do \ |
| first=`echo "$$dir1" | sed -e "$$sed_first"`; \ |
| if test "$$first" != "."; then \ |
| if test "$$first" = ".."; then \ |
| dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ |
| dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ |
| else \ |
| first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ |
| if test "$$first2" = "$$first"; then \ |
| dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ |
| else \ |
| dir2="../$$dir2"; \ |
| fi; \ |
| dir0="$$dir0"/"$$first"; \ |
| fi; \ |
| fi; \ |
| dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ |
| done; \ |
| reldir="$$dir2" |
| GZIP_ENV = --best |
| DIST_ARCHIVES = $(distdir).tar.xz |
| DIST_TARGETS = dist-xz |
| distuninstallcheck_listfiles = find . -type f -print |
| am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \ |
| | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$' |
| distcleancheck_listfiles = find . -type f -print |
| AALIB_CFLAGS = @AALIB_CFLAGS@ |
| AALIB_CONFIG = @AALIB_CONFIG@ |
| AALIB_LIBS = @AALIB_LIBS@ |
| ACLOCAL = @ACLOCAL@ |
| ACLOCAL_AMFLAGS = -I m4 -I common/m4 |
| AMTAR = @AMTAR@ |
| AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ |
| AR = @AR@ |
| AS = @AS@ |
| AUTOCONF = @AUTOCONF@ |
| AUTOHEADER = @AUTOHEADER@ |
| AUTOMAKE = @AUTOMAKE@ |
| AWK = @AWK@ |
| BZ2_LIBS = @BZ2_LIBS@ |
| CAIRO_CFLAGS = @CAIRO_CFLAGS@ |
| CAIRO_LIBS = @CAIRO_LIBS@ |
| CC = @CC@ |
| CCAS = @CCAS@ |
| CCASDEPMODE = @CCASDEPMODE@ |
| CCASFLAGS = @CCASFLAGS@ |
| CCDEPMODE = @CCDEPMODE@ |
| CFLAGS = @CFLAGS@ |
| CPP = @CPP@ |
| CPPFLAGS = @CPPFLAGS@ |
| CXX = @CXX@ |
| CXXCPP = @CXXCPP@ |
| CXXDEPMODE = @CXXDEPMODE@ |
| CXXFLAGS = @CXXFLAGS@ |
| CYGPATH_W = @CYGPATH_W@ |
| DEFAULT_AUDIOSINK = @DEFAULT_AUDIOSINK@ |
| DEFAULT_AUDIOSRC = @DEFAULT_AUDIOSRC@ |
| DEFAULT_VIDEOSINK = @DEFAULT_VIDEOSINK@ |
| DEFAULT_VIDEOSRC = @DEFAULT_VIDEOSRC@ |
| DEFAULT_VISUALIZER = @DEFAULT_VISUALIZER@ |
| DEFS = @DEFS@ |
| DEPDIR = @DEPDIR@ |
| DEPRECATED_CFLAGS = @DEPRECATED_CFLAGS@ |
| DIRECTSOUND_CFLAGS = @DIRECTSOUND_CFLAGS@ |
| DIRECTSOUND_LDFLAGS = @DIRECTSOUND_LDFLAGS@ |
| DIRECTSOUND_LIBS = @DIRECTSOUND_LIBS@ |
| DLLTOOL = @DLLTOOL@ |
| DSYMUTIL = @DSYMUTIL@ |
| DUMPBIN = @DUMPBIN@ |
| DV1394_CFLAGS = @DV1394_CFLAGS@ |
| DV1394_LIBS = @DV1394_LIBS@ |
| ECHO_C = @ECHO_C@ |
| ECHO_N = @ECHO_N@ |
| ECHO_T = @ECHO_T@ |
| EGREP = @EGREP@ |
| ERROR_CFLAGS = @ERROR_CFLAGS@ |
| ERROR_CXXFLAGS = @ERROR_CXXFLAGS@ |
| ERROR_OBJCFLAGS = @ERROR_OBJCFLAGS@ |
| EXEEXT = @EXEEXT@ |
| FFLAGS = @FFLAGS@ |
| FGREP = @FGREP@ |
| FLAC_CFLAGS = @FLAC_CFLAGS@ |
| FLAC_LIBS = @FLAC_LIBS@ |
| GCOV = @GCOV@ |
| GCOV_CFLAGS = @GCOV_CFLAGS@ |
| GCOV_LIBS = @GCOV_LIBS@ |
| GDK_PIXBUF_CFLAGS = @GDK_PIXBUF_CFLAGS@ |
| GDK_PIXBUF_LIBS = @GDK_PIXBUF_LIBS@ |
| GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@ |
| GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ |
| GIO_CFLAGS = @GIO_CFLAGS@ |
| GIO_LDFLAGS = @GIO_LDFLAGS@ |
| GIO_LIBS = @GIO_LIBS@ |
| GLIB_CFLAGS = @GLIB_CFLAGS@ |
| GLIB_EXTRA_CFLAGS = @GLIB_EXTRA_CFLAGS@ |
| GLIB_GENMARSHAL = @GLIB_GENMARSHAL@ |
| GLIB_LIBS = @GLIB_LIBS@ |
| GLIB_MKENUMS = @GLIB_MKENUMS@ |
| GLIB_PREFIX = @GLIB_PREFIX@ |
| GLIB_REQ = @GLIB_REQ@ |
| GMSGFMT = @GMSGFMT@ |
| GMSGFMT_015 = @GMSGFMT_015@ |
| GREP = @GREP@ |
| GSTPB_PLUGINS_DIR = @GSTPB_PLUGINS_DIR@ |
| GSTPB_PREFIX = @GSTPB_PREFIX@ |
| GST_AGE = @GST_AGE@ |
| GST_ALL_LDFLAGS = @GST_ALL_LDFLAGS@ |
| GST_API_VERSION = @GST_API_VERSION@ |
| GST_BASE_CFLAGS = @GST_BASE_CFLAGS@ |
| GST_BASE_LIBS = @GST_BASE_LIBS@ |
| GST_CFLAGS = @GST_CFLAGS@ |
| GST_CHECK_CFLAGS = @GST_CHECK_CFLAGS@ |
| GST_CHECK_LIBS = @GST_CHECK_LIBS@ |
| GST_CONTROLLER_CFLAGS = @GST_CONTROLLER_CFLAGS@ |
| GST_CONTROLLER_LIBS = @GST_CONTROLLER_LIBS@ |
| GST_CURRENT = @GST_CURRENT@ |
| GST_CXXFLAGS = @GST_CXXFLAGS@ |
| GST_LEVEL_DEFAULT = @GST_LEVEL_DEFAULT@ |
| GST_LIBS = @GST_LIBS@ |
| GST_LIBVERSION = @GST_LIBVERSION@ |
| GST_LICENSE = @GST_LICENSE@ |
| GST_LT_LDFLAGS = @GST_LT_LDFLAGS@ |
| GST_NET_CFLAGS = @GST_NET_CFLAGS@ |
| GST_NET_LIBS = @GST_NET_LIBS@ |
| GST_OBJCFLAGS = @GST_OBJCFLAGS@ |
| GST_OPTION_CFLAGS = @GST_OPTION_CFLAGS@ |
| GST_OPTION_CXXFLAGS = @GST_OPTION_CXXFLAGS@ |
| GST_OPTION_OBJCFLAGS = @GST_OPTION_OBJCFLAGS@ |
| GST_PACKAGE_NAME = @GST_PACKAGE_NAME@ |
| GST_PACKAGE_ORIGIN = @GST_PACKAGE_ORIGIN@ |
| GST_PLUGINS_ALL = @GST_PLUGINS_ALL@ |
| GST_PLUGINS_BASE_CFLAGS = @GST_PLUGINS_BASE_CFLAGS@ |
| GST_PLUGINS_BASE_DIR = @GST_PLUGINS_BASE_DIR@ |
| GST_PLUGINS_BASE_LIBS = @GST_PLUGINS_BASE_LIBS@ |
| GST_PLUGINS_DIR = @GST_PLUGINS_DIR@ |
| GST_PLUGINS_NONPORTED = @GST_PLUGINS_NONPORTED@ |
| GST_PLUGINS_SELECTED = @GST_PLUGINS_SELECTED@ |
| GST_PLUGIN_LDFLAGS = @GST_PLUGIN_LDFLAGS@ |
| GST_PLUGIN_LIBTOOLFLAGS = @GST_PLUGIN_LIBTOOLFLAGS@ |
| GST_PREFIX = @GST_PREFIX@ |
| GST_REVISION = @GST_REVISION@ |
| GST_TOOLS_DIR = @GST_TOOLS_DIR@ |
| GTKDOC_CHECK = @GTKDOC_CHECK@ |
| GTKDOC_DEPS_CFLAGS = @GTKDOC_DEPS_CFLAGS@ |
| GTKDOC_DEPS_LIBS = @GTKDOC_DEPS_LIBS@ |
| GTKDOC_MKPDF = @GTKDOC_MKPDF@ |
| GTKDOC_REBASE = @GTKDOC_REBASE@ |
| GTK_CFLAGS = @GTK_CFLAGS@ |
| GTK_LIBS = @GTK_LIBS@ |
| GTK_X11_CFLAGS = @GTK_X11_CFLAGS@ |
| GTK_X11_LIBS = @GTK_X11_LIBS@ |
| GUDEV_CFLAGS = @GUDEV_CFLAGS@ |
| GUDEV_LIBS = @GUDEV_LIBS@ |
| HAVE_AVC1394 = @HAVE_AVC1394@ |
| HAVE_CXX = @HAVE_CXX@ |
| HAVE_DIRECTSOUND = @HAVE_DIRECTSOUND@ |
| HAVE_ROM1394 = @HAVE_ROM1394@ |
| HAVE_SPEEX = @HAVE_SPEEX@ |
| HAVE_X = @HAVE_X@ |
| HAVE_XSHM = @HAVE_XSHM@ |
| HAVE_ZLIB = @HAVE_ZLIB@ |
| HTML_DIR = @HTML_DIR@ |
| INSTALL = @INSTALL@ |
| INSTALL_DATA = @INSTALL_DATA@ |
| INSTALL_PROGRAM = @INSTALL_PROGRAM@ |
| INSTALL_SCRIPT = @INSTALL_SCRIPT@ |
| INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ |
| INTLLIBS = @INTLLIBS@ |
| INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@ |
| JACK_0_120_1_CFLAGS = @JACK_0_120_1_CFLAGS@ |
| JACK_0_120_1_LIBS = @JACK_0_120_1_LIBS@ |
| JACK_1_9_7_CFLAGS = @JACK_1_9_7_CFLAGS@ |
| JACK_1_9_7_LIBS = @JACK_1_9_7_LIBS@ |
| JACK_CFLAGS = @JACK_CFLAGS@ |
| JACK_LIBS = @JACK_LIBS@ |
| JPEG_LIBS = @JPEG_LIBS@ |
| LD = @LD@ |
| LDFLAGS = @LDFLAGS@ |
| LIBCACA_CFLAGS = @LIBCACA_CFLAGS@ |
| LIBCACA_LIBS = @LIBCACA_LIBS@ |
| LIBDV_CFLAGS = @LIBDV_CFLAGS@ |
| LIBDV_LIBS = @LIBDV_LIBS@ |
| LIBICONV = @LIBICONV@ |
| LIBIEC61883_CFLAGS = @LIBIEC61883_CFLAGS@ |
| LIBIEC61883_LIBS = @LIBIEC61883_LIBS@ |
| LIBINTL = @LIBINTL@ |
| LIBM = @LIBM@ |
| LIBOBJS = @LIBOBJS@ |
| LIBPNG_CFLAGS = @LIBPNG_CFLAGS@ |
| LIBPNG_LIBS = @LIBPNG_LIBS@ |
| LIBRT = @LIBRT@ |
| LIBS = @LIBS@ |
| LIBTOOL = @LIBTOOL@ |
| LIBV4L2_CFLAGS = @LIBV4L2_CFLAGS@ |
| LIBV4L2_LIBS = @LIBV4L2_LIBS@ |
| LIPO = @LIPO@ |
| LN_S = @LN_S@ |
| LOCALEDIR = @LOCALEDIR@ |
| LTLIBICONV = @LTLIBICONV@ |
| LTLIBINTL = @LTLIBINTL@ |
| LTLIBOBJS = @LTLIBOBJS@ |
| MAINT = @MAINT@ |
| MAKEINFO = @MAKEINFO@ |
| MANIFEST_TOOL = @MANIFEST_TOOL@ |
| MKDIR_P = @MKDIR_P@ |
| MSGFMT = @MSGFMT@ |
| MSGFMT_015 = @MSGFMT_015@ |
| MSGMERGE = @MSGMERGE@ |
| NM = @NM@ |
| NMEDIT = @NMEDIT@ |
| OBJC = @OBJC@ |
| OBJCDEPMODE = @OBJCDEPMODE@ |
| OBJCFLAGS = @OBJCFLAGS@ |
| OBJDUMP = @OBJDUMP@ |
| OBJEXT = @OBJEXT@ |
| ORCC = @ORCC@ |
| ORCC_FLAGS = @ORCC_FLAGS@ |
| ORC_CFLAGS = @ORC_CFLAGS@ |
| ORC_LIBS = @ORC_LIBS@ |
| OTOOL = @OTOOL@ |
| OTOOL64 = @OTOOL64@ |
| PACKAGE = @PACKAGE@ |
| PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ |
| PACKAGE_NAME = @PACKAGE_NAME@ |
| PACKAGE_STRING = @PACKAGE_STRING@ |
| PACKAGE_TARNAME = @PACKAGE_TARNAME@ |
| PACKAGE_URL = @PACKAGE_URL@ |
| PACKAGE_VERSION = @PACKAGE_VERSION@ |
| PACKAGE_VERSION_MAJOR = @PACKAGE_VERSION_MAJOR@ |
| PACKAGE_VERSION_MICRO = @PACKAGE_VERSION_MICRO@ |
| PACKAGE_VERSION_MINOR = @PACKAGE_VERSION_MINOR@ |
| PACKAGE_VERSION_NANO = @PACKAGE_VERSION_NANO@ |
| PACKAGE_VERSION_RELEASE = @PACKAGE_VERSION_RELEASE@ |
| PATH_SEPARATOR = @PATH_SEPARATOR@ |
| PKG_CONFIG = @PKG_CONFIG@ |
| PLUGINDIR = @PLUGINDIR@ |
| POSUB = @POSUB@ |
| PROFILE_CFLAGS = @PROFILE_CFLAGS@ |
| PULSE_CFLAGS = @PULSE_CFLAGS@ |
| PULSE_LIBS = @PULSE_LIBS@ |
| PYTHON = @PYTHON@ |
| PYTHON_EXEC_PREFIX = @PYTHON_EXEC_PREFIX@ |
| PYTHON_PLATFORM = @PYTHON_PLATFORM@ |
| PYTHON_PREFIX = @PYTHON_PREFIX@ |
| PYTHON_VERSION = @PYTHON_VERSION@ |
| RANLIB = @RANLIB@ |
| RAW1394_CFLAGS = @RAW1394_CFLAGS@ |
| RAW1394_LIBS = @RAW1394_LIBS@ |
| SED = @SED@ |
| SET_MAKE = @SET_MAKE@ |
| SHELL = @SHELL@ |
| SHOUT2_CFLAGS = @SHOUT2_CFLAGS@ |
| SHOUT2_LIBS = @SHOUT2_LIBS@ |
| SOUP_CFLAGS = @SOUP_CFLAGS@ |
| SOUP_LIBS = @SOUP_LIBS@ |
| SPEEX_CFLAGS = @SPEEX_CFLAGS@ |
| SPEEX_LIBS = @SPEEX_LIBS@ |
| STRIP = @STRIP@ |
| TAGLIB_CFLAGS = @TAGLIB_CFLAGS@ |
| TAGLIB_CXXFLAGS = @TAGLIB_CXXFLAGS@ |
| TAGLIB_LIBS = @TAGLIB_LIBS@ |
| USE_NLS = @USE_NLS@ |
| VALGRIND_CFLAGS = @VALGRIND_CFLAGS@ |
| VALGRIND_LIBS = @VALGRIND_LIBS@ |
| VALGRIND_PATH = @VALGRIND_PATH@ |
| VERSION = @VERSION@ |
| VPX_130_CFLAGS = @VPX_130_CFLAGS@ |
| VPX_130_LIBS = @VPX_130_LIBS@ |
| VPX_CFLAGS = @VPX_CFLAGS@ |
| VPX_LIBS = @VPX_LIBS@ |
| WARNING_CFLAGS = @WARNING_CFLAGS@ |
| WARNING_CXXFLAGS = @WARNING_CXXFLAGS@ |
| WARNING_OBJCFLAGS = @WARNING_OBJCFLAGS@ |
| WAVPACK_CFLAGS = @WAVPACK_CFLAGS@ |
| WAVPACK_LIBS = @WAVPACK_LIBS@ |
| XDAMAGE_CFLAGS = @XDAMAGE_CFLAGS@ |
| XDAMAGE_LIBS = @XDAMAGE_LIBS@ |
| XFIXES_CFLAGS = @XFIXES_CFLAGS@ |
| XFIXES_LIBS = @XFIXES_LIBS@ |
| XGETTEXT = @XGETTEXT@ |
| XGETTEXT_015 = @XGETTEXT_015@ |
| XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@ |
| XMKMF = @XMKMF@ |
| XSHM_LIBS = @XSHM_LIBS@ |
| X_CFLAGS = @X_CFLAGS@ |
| X_EXTRA_LIBS = @X_EXTRA_LIBS@ |
| X_LIBS = @X_LIBS@ |
| X_PRE_LIBS = @X_PRE_LIBS@ |
| ZLIB_LIBS = @ZLIB_LIBS@ |
| abs_builddir = @abs_builddir@ |
| abs_srcdir = @abs_srcdir@ |
| abs_top_builddir = @abs_top_builddir@ |
| abs_top_srcdir = @abs_top_srcdir@ |
| ac_ct_AR = @ac_ct_AR@ |
| ac_ct_CC = @ac_ct_CC@ |
| ac_ct_CXX = @ac_ct_CXX@ |
| ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ |
| ac_ct_OBJC = @ac_ct_OBJC@ |
| am__include = @am__include@ |
| am__leading_dot = @am__leading_dot@ |
| am__quote = @am__quote@ |
| am__tar = @am__tar@ |
| am__untar = @am__untar@ |
| bindir = @bindir@ |
| build = @build@ |
| build_alias = @build_alias@ |
| build_cpu = @build_cpu@ |
| build_os = @build_os@ |
| build_vendor = @build_vendor@ |
| builddir = @builddir@ |
| datadir = @datadir@ |
| datarootdir = @datarootdir@ |
| docdir = @docdir@ |
| dvidir = @dvidir@ |
| exec_prefix = @exec_prefix@ |
| host = @host@ |
| host_alias = @host_alias@ |
| host_cpu = @host_cpu@ |
| host_os = @host_os@ |
| host_vendor = @host_vendor@ |
| htmldir = @htmldir@ |
| includedir = @includedir@ |
| infodir = @infodir@ |
| install_sh = @install_sh@ |
| libdir = @libdir@ |
| libexecdir = @libexecdir@ |
| localedir = @localedir@ |
| localstatedir = @localstatedir@ |
| mandir = @mandir@ |
| mkdir_p = @mkdir_p@ |
| oldincludedir = @oldincludedir@ |
| pdfdir = @pdfdir@ |
| pkgpyexecdir = @pkgpyexecdir@ |
| pkgpythondir = @pkgpythondir@ |
| plugindir = @plugindir@ |
| prefix = @prefix@ |
| program_transform_name = @program_transform_name@ |
| psdir = @psdir@ |
| pyexecdir = @pyexecdir@ |
| pythondir = @pythondir@ |
| sbindir = @sbindir@ |
| sharedstatedir = @sharedstatedir@ |
| srcdir = @srcdir@ |
| sysconfdir = @sysconfdir@ |
| target = @target@ |
| target_alias = @target_alias@ |
| target_cpu = @target_cpu@ |
| target_os = @target_os@ |
| target_vendor = @target_vendor@ |
| top_build_prefix = @top_build_prefix@ |
| top_builddir = @top_builddir@ |
| top_srcdir = @top_srcdir@ |
| DISTCHECK_CONFIGURE_FLAGS = --enable-gtk-doc |
| ALWAYS_SUBDIRS = \ |
| gst sys ext \ |
| tests \ |
| docs \ |
| po \ |
| common \ |
| m4 \ |
| pkgconfig |
| |
| SUBDIRS = $(ALWAYS_SUBDIRS) |
| DIST_SUBDIRS = $(ALWAYS_SUBDIRS) |
| |
| # the MANIFEST contains all win32 related files that should be disted |
| win32 = $(shell cat $(top_srcdir)/win32/MANIFEST) |
| |
| # wildcard is apparently not portable to other makes, hence the use of find |
| # these are library .def files with the symbols to export |
| win32defs = $(shell find $(top_srcdir)/win32/common -name '*.def') |
| |
| # wildcard is apparently not portable to other makes, hence the use of find |
| # these are files that need to be disted with CRLF line endings: |
| win32crlf = $(shell find $(top_srcdir)/win32 -name '*.dsw' -o -name '*.dsp') |
| |
| # include before EXTRA_DIST for win32 assignment |
| EXTRA_DIST = \ |
| gst-plugins-good.spec depcomp \ |
| AUTHORS COPYING NEWS README RELEASE REQUIREMENTS \ |
| ChangeLog gst-plugins-good.doap autogen.sh \ |
| $(win32) |
| |
| DISTCLEANFILES = _stdint.h |
| noinst_HEADERS = \ |
| gst-libs/gst/gettext.h \ |
| gst-libs/gst/gst-i18n-plugin.h \ |
| gst-libs/gst/glib-compat-private.h |
| |
| |
| # cruft: plugins that have been merged or moved or renamed |
| CRUFT_FILES = \ |
| $(top_builddir)/common/shave \ |
| $(top_builddir)/common/shave-libtool \ |
| $(top_builddir)/gst/median/.libs/*.{so,dll,DLL,dylib} \ |
| $(top_builddir)/gst/qtdemux/.libs/*.{so,dll,DLL,dylib} \ |
| $(top_builddir)/gst/quicktime/.libs/*.{so,dll,DLL,dylib} \ |
| $(top_builddir)/gst/videofilter/.libs/*videoflip.{so,dll,DLL,dylib} \ |
| $(top_builddir)/gst/videofilter/.libs/*videobalance.{so,dll,DLL,dylib} \ |
| $(top_builddir)/gst/videofilter/.libs/*gamma.{so,dll,DLL,dylib} |
| |
| CRUFT_DIRS = \ |
| $(top_srcdir)/gst/median \ |
| $(top_srcdir)/gst/qtdemux \ |
| $(top_srcdir)/gst/quicktime \ |
| $(top_srcdir)/ext/annodex |
| |
| all: config.h |
| $(MAKE) $(AM_MAKEFLAGS) all-recursive |
| |
| .SUFFIXES: |
| am--refresh: Makefile |
| @: |
| $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/common/win32.mak $(top_srcdir)/common/release.mak $(top_srcdir)/common/po.mak $(top_srcdir)/common/coverage/lcov.mak $(top_srcdir)/common/cruft.mak $(am__configure_deps) |
| @for dep in $?; do \ |
| case '$(am__configure_deps)' in \ |
| *$$dep*) \ |
| echo ' cd $(srcdir) && $(AUTOMAKE) --gnu'; \ |
| $(am__cd) $(srcdir) && $(AUTOMAKE) --gnu \ |
| && exit 0; \ |
| exit 1;; \ |
| esac; \ |
| done; \ |
| echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \ |
| $(am__cd) $(top_srcdir) && \ |
| $(AUTOMAKE) --gnu Makefile |
| .PRECIOUS: Makefile |
| Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status |
| @case '$?' in \ |
| *config.status*) \ |
| echo ' $(SHELL) ./config.status'; \ |
| $(SHELL) ./config.status;; \ |
| *) \ |
| echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \ |
| cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \ |
| esac; |
| $(top_srcdir)/common/win32.mak $(top_srcdir)/common/release.mak $(top_srcdir)/common/po.mak $(top_srcdir)/common/coverage/lcov.mak $(top_srcdir)/common/cruft.mak: |
| |
| $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) |
| $(SHELL) ./config.status --recheck |
| |
| $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) |
| $(am__cd) $(srcdir) && $(AUTOCONF) |
| $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) |
| $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) |
| $(am__aclocal_m4_deps): |
| |
| config.h: stamp-h1 |
| @test -f $@ || rm -f stamp-h1 |
| @test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1 |
| |
| stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status |
| @rm -f stamp-h1 |
| cd $(top_builddir) && $(SHELL) ./config.status config.h |
| $(srcdir)/config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) |
| ($(am__cd) $(top_srcdir) && $(AUTOHEADER)) |
| rm -f stamp-h1 |
| touch $@ |
| |
| distclean-hdr: |
| -rm -f config.h stamp-h1 |
| gst-plugins-good.spec: $(top_builddir)/config.status $(srcdir)/gst-plugins-good.spec.in |
| cd $(top_builddir) && $(SHELL) ./config.status $@ |
| |
| mostlyclean-libtool: |
| -rm -f *.lo |
| |
| clean-libtool: |
| -rm -rf .libs _libs |
| |
| distclean-libtool: |
| -rm -f libtool config.lt |
| |
| # This directory's subdirectories are mostly independent; you can cd |
| # into them and run 'make' without going through this Makefile. |
| # To change the values of 'make' variables: instead of editing Makefiles, |
| # (1) if the variable is set in 'config.status', edit 'config.status' |
| # (which will cause the Makefiles to be regenerated when you run 'make'); |
| # (2) otherwise, pass the desired values on the 'make' command line. |
| $(am__recursive_targets): |
| @fail=; \ |
| if $(am__make_keepgoing); then \ |
| failcom='fail=yes'; \ |
| else \ |
| failcom='exit 1'; \ |
| fi; \ |
| dot_seen=no; \ |
| target=`echo $@ | sed s/-recursive//`; \ |
| case "$@" in \ |
| distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ |
| *) list='$(SUBDIRS)' ;; \ |
| esac; \ |
| for subdir in $$list; do \ |
| echo "Making $$target in $$subdir"; \ |
| if test "$$subdir" = "."; then \ |
| dot_seen=yes; \ |
| local_target="$$target-am"; \ |
| else \ |
| local_target="$$target"; \ |
| fi; \ |
| ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ |
| || eval $$failcom; \ |
| done; \ |
| if test "$$dot_seen" = "no"; then \ |
| $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ |
| fi; test -z "$$fail" |
| |
| ID: $(am__tagged_files) |
| $(am__define_uniq_tagged_files); mkid -fID $$unique |
| tags: tags-recursive |
| TAGS: tags |
| |
| tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) |
| set x; \ |
| here=`pwd`; \ |
| if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ |
| include_option=--etags-include; \ |
| empty_fix=.; \ |
| else \ |
| include_option=--include; \ |
| empty_fix=; \ |
| fi; \ |
| list='$(SUBDIRS)'; for subdir in $$list; do \ |
| if test "$$subdir" = .; then :; else \ |
| test ! -f $$subdir/TAGS || \ |
| set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ |
| fi; \ |
| done; \ |
| $(am__define_uniq_tagged_files); \ |
| shift; \ |
| if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ |
| test -n "$$unique" || unique=$$empty_fix; \ |
| if test $$# -gt 0; then \ |
| $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ |
| "$$@" $$unique; \ |
| else \ |
| $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ |
| $$unique; \ |
| fi; \ |
| fi |
| ctags: ctags-recursive |
| |
| CTAGS: ctags |
| ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) |
| $(am__define_uniq_tagged_files); \ |
| test -z "$(CTAGS_ARGS)$$unique" \ |
| || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ |
| $$unique |
| |
| GTAGS: |
| here=`$(am__cd) $(top_builddir) && pwd` \ |
| && $(am__cd) $(top_srcdir) \ |
| && gtags -i $(GTAGS_ARGS) "$$here" |
| cscope: cscope.files |
| test ! -s cscope.files \ |
| || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS) |
| clean-cscope: |
| -rm -f cscope.files |
| cscope.files: clean-cscope cscopelist |
| cscopelist: cscopelist-recursive |
| |
| cscopelist-am: $(am__tagged_files) |
| list='$(am__tagged_files)'; \ |
| case "$(srcdir)" in \ |
| [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ |
| *) sdir=$(subdir)/$(srcdir) ;; \ |
| esac; \ |
| for i in $$list; do \ |
| if test -f "$$i"; then \ |
| echo "$(subdir)/$$i"; \ |
| else \ |
| echo "$$sdir/$$i"; \ |
| fi; \ |
| done >> $(top_builddir)/cscope.files |
| |
| distclean-tags: |
| -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags |
| -rm -f cscope.out cscope.in.out cscope.po.out cscope.files |
| |
| distdir: $(DISTFILES) |
| $(am__remove_distdir) |
| test -d "$(distdir)" || mkdir "$(distdir)" |
| @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ |
| topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ |
| list='$(DISTFILES)'; \ |
| dist_files=`for file in $$list; do echo $$file; done | \ |
| sed -e "s|^$$srcdirstrip/||;t" \ |
| -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ |
| case $$dist_files in \ |
| */*) $(MKDIR_P) `echo "$$dist_files" | \ |
| sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ |
| sort -u` ;; \ |
| esac; \ |
| for file in $$dist_files; do \ |
| if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ |
| if test -d $$d/$$file; then \ |
| dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ |
| if test -d "$(distdir)/$$file"; then \ |
| find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ |
| fi; \ |
| if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ |
| cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ |
| find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ |
| fi; \ |
| cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ |
| else \ |
| test -f "$(distdir)/$$file" \ |
| || cp -p $$d/$$file "$(distdir)/$$file" \ |
| || exit 1; \ |
| fi; \ |
| done |
| @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ |
| if test "$$subdir" = .; then :; else \ |
| $(am__make_dryrun) \ |
| || test -d "$(distdir)/$$subdir" \ |
| || $(MKDIR_P) "$(distdir)/$$subdir" \ |
| || exit 1; \ |
| dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ |
| $(am__relativize); \ |
| new_distdir=$$reldir; \ |
| dir1=$$subdir; dir2="$(top_distdir)"; \ |
| $(am__relativize); \ |
| new_top_distdir=$$reldir; \ |
| echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ |
| echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ |
| ($(am__cd) $$subdir && \ |
| $(MAKE) $(AM_MAKEFLAGS) \ |
| top_distdir="$$new_top_distdir" \ |
| distdir="$$new_distdir" \ |
| am__remove_distdir=: \ |
| am__skip_length_check=: \ |
| am__skip_mode_fix=: \ |
| distdir) \ |
| || exit 1; \ |
| fi; \ |
| done |
| $(MAKE) $(AM_MAKEFLAGS) \ |
| top_distdir="$(top_distdir)" distdir="$(distdir)" \ |
| dist-hook |
| -test -n "$(am__skip_mode_fix)" \ |
| || find "$(distdir)" -type d ! -perm -755 \ |
| -exec chmod u+rwx,go+rx {} \; -o \ |
| ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ |
| ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ |
| ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \ |
| || chmod -R a+r "$(distdir)" |
| dist-gzip: distdir |
| tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz |
| $(am__post_remove_distdir) |
| |
| dist-bzip2: distdir |
| tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2 |
| $(am__post_remove_distdir) |
| |
| dist-lzip: distdir |
| tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz |
| $(am__post_remove_distdir) |
| dist-xz: distdir |
| tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz |
| $(am__post_remove_distdir) |
| |
| dist-tarZ: distdir |
| @echo WARNING: "Support for shar distribution archives is" \ |
| "deprecated." >&2 |
| @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 |
| tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z |
| $(am__post_remove_distdir) |
| |
| dist-shar: distdir |
| @echo WARNING: "Support for distribution archives compressed with" \ |
| "legacy program 'compress' is deprecated." >&2 |
| @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 |
| shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz |
| $(am__post_remove_distdir) |
| |
| dist-zip: distdir |
| -rm -f $(distdir).zip |
| zip -rq $(distdir).zip $(distdir) |
| $(am__post_remove_distdir) |
| |
| dist dist-all: |
| $(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:' |
| $(am__post_remove_distdir) |
| |
| # This target untars the dist file and tries a VPATH configuration. Then |
| # it guarantees that the distribution is self-contained by making another |
| # tarfile. |
| distcheck: dist |
| case '$(DIST_ARCHIVES)' in \ |
| *.tar.gz*) \ |
| GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\ |
| *.tar.bz2*) \ |
| bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\ |
| *.tar.lz*) \ |
| lzip -dc $(distdir).tar.lz | $(am__untar) ;;\ |
| *.tar.xz*) \ |
| xz -dc $(distdir).tar.xz | $(am__untar) ;;\ |
| *.tar.Z*) \ |
| uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ |
| *.shar.gz*) \ |
| GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\ |
| *.zip*) \ |
| unzip $(distdir).zip ;;\ |
| esac |
| chmod -R a-w $(distdir) |
| chmod u+w $(distdir) |
| mkdir $(distdir)/_build $(distdir)/_inst |
| chmod a-w $(distdir) |
| test -d $(distdir)/_build || exit 0; \ |
| dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ |
| && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ |
| && $(MAKE) $(AM_MAKEFLAGS) distcheck-hook \ |
| && am__cwd=`pwd` \ |
| && $(am__cd) $(distdir)/_build \ |
| && ../configure \ |
| $(AM_DISTCHECK_CONFIGURE_FLAGS) \ |
| $(DISTCHECK_CONFIGURE_FLAGS) \ |
| --srcdir=.. --prefix="$$dc_install_base" \ |
| && $(MAKE) $(AM_MAKEFLAGS) \ |
| && $(MAKE) $(AM_MAKEFLAGS) dvi \ |
| && $(MAKE) $(AM_MAKEFLAGS) check \ |
| && $(MAKE) $(AM_MAKEFLAGS) install \ |
| && $(MAKE) $(AM_MAKEFLAGS) installcheck \ |
| && $(MAKE) $(AM_MAKEFLAGS) uninstall \ |
| && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ |
| distuninstallcheck \ |
| && chmod -R a-w "$$dc_install_base" \ |
| && ({ \ |
| (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ |
| && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ |
| && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ |
| && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ |
| distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ |
| } || { rm -rf "$$dc_destdir"; exit 1; }) \ |
| && rm -rf "$$dc_destdir" \ |
| && $(MAKE) $(AM_MAKEFLAGS) dist \ |
| && rm -rf $(DIST_ARCHIVES) \ |
| && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \ |
| && cd "$$am__cwd" \ |
| || exit 1 |
| $(am__post_remove_distdir) |
| @(echo "$(distdir) archives ready for distribution: "; \ |
| list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ |
| sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x' |
| distuninstallcheck: |
| @test -n '$(distuninstallcheck_dir)' || { \ |
| echo 'ERROR: trying to run $@ with an empty' \ |
| '$$(distuninstallcheck_dir)' >&2; \ |
| exit 1; \ |
| }; \ |
| $(am__cd) '$(distuninstallcheck_dir)' || { \ |
| echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \ |
| exit 1; \ |
| }; \ |
| test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \ |
| || { echo "ERROR: files left after uninstall:" ; \ |
| if test -n "$(DESTDIR)"; then \ |
| echo " (check DESTDIR support)"; \ |
| fi ; \ |
| $(distuninstallcheck_listfiles) ; \ |
| exit 1; } >&2 |
| distcleancheck: distclean |
| @if test '$(srcdir)' = . ; then \ |
| echo "ERROR: distcleancheck can only run from a VPATH build" ; \ |
| exit 1 ; \ |
| fi |
| @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ |
| || { echo "ERROR: files left in build directory after distclean:" ; \ |
| $(distcleancheck_listfiles) ; \ |
| exit 1; } >&2 |
| check-am: all-am |
| check: check-recursive |
| all-am: Makefile $(HEADERS) config.h all-local |
| installdirs: installdirs-recursive |
| installdirs-am: |
| install: install-recursive |
| install-exec: install-exec-recursive |
| install-data: install-data-recursive |
| uninstall: uninstall-recursive |
| |
| install-am: all-am |
| @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am |
| |
| installcheck: installcheck-recursive |
| install-strip: |
| if test -z '$(STRIP)'; then \ |
| $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ |
| install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ |
| install; \ |
| else \ |
| $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ |
| install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ |
| "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ |
| fi |
| mostlyclean-generic: |
| |
| clean-generic: |
| |
| distclean-generic: |
| -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) |
| -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) |
| -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES) |
| |
| maintainer-clean-generic: |
| @echo "This command is intended for maintainers to use" |
| @echo "it deletes files that may require special tools to rebuild." |
| clean: clean-recursive |
| |
| clean-am: clean-generic clean-libtool mostlyclean-am |
| |
| distclean: distclean-recursive |
| -rm -f $(am__CONFIG_DISTCLEAN_FILES) |
| -rm -f Makefile |
| distclean-am: clean-am distclean-generic distclean-hdr \ |
| distclean-libtool distclean-tags |
| |
| dvi: dvi-recursive |
| |
| dvi-am: |
| |
| html: html-recursive |
| |
| html-am: |
| |
| info: info-recursive |
| |
| info-am: |
| |
| install-data-am: |
| |
| install-dvi: install-dvi-recursive |
| |
| install-dvi-am: |
| |
| install-exec-am: |
| |
| install-html: install-html-recursive |
| |
| install-html-am: |
| |
| install-info: install-info-recursive |
| |
| install-info-am: |
| |
| install-man: |
| |
| install-pdf: install-pdf-recursive |
| |
| install-pdf-am: |
| |
| install-ps: install-ps-recursive |
| |
| install-ps-am: |
| |
| installcheck-am: |
| |
| maintainer-clean: maintainer-clean-recursive |
| -rm -f $(am__CONFIG_DISTCLEAN_FILES) |
| -rm -rf $(top_srcdir)/autom4te.cache |
| -rm -f Makefile |
| maintainer-clean-am: distclean-am maintainer-clean-generic |
| |
| mostlyclean: mostlyclean-recursive |
| |
| mostlyclean-am: mostlyclean-generic mostlyclean-libtool |
| |
| pdf: pdf-recursive |
| |
| pdf-am: |
| |
| ps: ps-recursive |
| |
| ps-am: |
| |
| uninstall-am: |
| |
| .MAKE: $(am__recursive_targets) all install-am install-strip |
| |
| .PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am all-local \ |
| am--refresh check check-am clean clean-cscope clean-generic \ |
| clean-libtool cscope cscopelist-am ctags ctags-am dist \ |
| dist-all dist-bzip2 dist-gzip dist-hook dist-lzip dist-shar \ |
| dist-tarZ dist-xz dist-zip distcheck distclean \ |
| distclean-generic distclean-hdr distclean-libtool \ |
| distclean-tags distcleancheck distdir distuninstallcheck dvi \ |
| dvi-am html html-am info info-am install install-am \ |
| install-data install-data-am install-dvi install-dvi-am \ |
| install-exec install-exec-am install-html install-html-am \ |
| install-info install-info-am install-man install-pdf \ |
| install-pdf-am install-ps install-ps-am install-strip \ |
| installcheck installcheck-am installdirs installdirs-am \ |
| maintainer-clean maintainer-clean-generic mostlyclean \ |
| mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ |
| tags tags-am uninstall uninstall-am |
| |
| |
| win32-debug: |
| @echo; \ |
| echo win32 = $(win32); \ |
| echo; \ |
| echo win32defs = $(win32defs); \ |
| echo; \ |
| echo win32crlf = $(win32crlf); \ |
| echo |
| |
| win32-check-crlf: |
| @echo Checking win32 files for CR LF line endings ...; \ |
| fail=0 ; \ |
| for each in $(win32crlf) ; do \ |
| result=`perl -e 'print grep(/\r\n/,<>)' "$$each" | wc -l`; \ |
| if test "$$result" = 0 ; then \ |
| echo $$each must be fixed to have CRLF line endings ; \ |
| fail=1; \ |
| fi ; \ |
| done ; \ |
| exit $$fail |
| |
| # make sure all symbols we export on linux are defined in the win32 .def too |
| # (don't care about other unixes for now, it's enough if it works on one of |
| # the linux build bots; we assume .so ) |
| check-exports: |
| @fail=0 ; \ |
| for l in $(win32defs); do \ |
| libbase=`basename "$$l" ".def"`; \ |
| libso=`find "$(top_builddir)" -name "$$libbase-@GST_API_VERSION@.so" | grep -v /_build/ | head -n1`; \ |
| libdef="$(top_srcdir)/win32/common/$$libbase.def"; \ |
| if test "x$$libso" != "x"; then \ |
| echo Checking symbols in $$libso; \ |
| if ! ($(top_srcdir)/common/check-exports $$libdef $$libso) ; then \ |
| fail=1; \ |
| fi; \ |
| fi; \ |
| done ; \ |
| if test $$fail != 0; then \ |
| echo '-----------------------------------------------------------'; \ |
| echo 'Run this to update the .def files:'; \ |
| echo 'make update-exports'; \ |
| echo '-----------------------------------------------------------'; \ |
| fi; \ |
| exit $$fail |
| |
| update-exports: |
| make check-exports 2>&1 | patch -p1 |
| git add win32/common/libgst*.def |
| git diff --cached -- win32/common/ |
| echo '^^^--- updated and staged changes above' |
| |
| # complain about nonportable printf format strings (%lld, %llu, %zu etc.) |
| check-nonportable-print-format: |
| @fail=0 ; \ |
| loc=`find "$(top_srcdir)" -name '*.c' | xargs grep -n -e '%[0-9]*ll[udx]' -e '%[0-9]*z[udx]'`; \ |
| if test "x$$loc" != "x"; then \ |
| echo "Please fix the following print format strings:" ; \ |
| find "$(top_srcdir)" -name '*.c' | xargs grep -n -e '%[0-9]*ll[udx]' -e '%[0-9]*z[udx]'; \ |
| fail=1; \ |
| fi; \ |
| exit $$fail |
| |
| dist-hook: check-exports win32-check-crlf |
| |
| release: dist |
| @$(MAKE) $(PACKAGE)-$(VERSION).tar.xz.sha256sum |
| @echo |
| @echo "=================================================================================================" |
| @echo "http://gstreamer.freedesktop.org/src/$(PACKAGE)/$(PACKAGE)-$(VERSION).tar.xz" |
| @cat $(PACKAGE)-$(VERSION).tar.xz.sha256sum |
| @echo "=================================================================================================" |
| @if [ -d ~/releases/ ]; then \ |
| cp -v $(PACKAGE)-$(VERSION).tar.xz ~/releases/; \ |
| fi |
| @if [ -d ../www/data/src ]; then \ |
| mv -v $(PACKAGE)-$(VERSION).tar.xz ../www/data/src/$(PACKAGE)/ ; \ |
| mv -v $(PACKAGE)-$(VERSION).tar.xz.sha256sum ../www/data/src/$(PACKAGE)/ ; \ |
| fi |
| @echo "=================================================================================================" |
| |
| # generate sha256 sum files |
| %.sha256sum: % |
| @sha256sum $< > $@ |
| |
| # check that no marshal or enumtypes files are included |
| # this in turn ensures that distcheck fails for missing .list files which is currently |
| # shadowed when the corresponding .c and .h files are included. |
| distcheck-hook: |
| @test "x" = "x`find $(distdir) -name \*-enumtypes.[ch] | grep -v win32`" && \ |
| test "x" = "x`find $(distdir) -name \*-marshal.[ch]`" || \ |
| ( echo "*** Leftover enumtypes or marshal files in the tarball." && \ |
| echo "*** Make sure the following files are not disted:" && \ |
| find $(distdir) -name \*-enumtypes.[ch] | grep -v win32 && \ |
| find $(distdir) -name \*-marshal.[ch] && \ |
| false ) |
| |
| # rule to download the latest .po files |
| download-po: $(top_srcdir)/common/download-translations |
| $(top_srcdir)/common/download-translations $(PACKAGE) |
| |
| check-valgrind: |
| cd tests/check && make check-valgrind |
| |
| @HAVE_GST_CHECK_TRUE@check-torture: |
| @HAVE_GST_CHECK_TRUE@ cd tests/check && make torture |
| @HAVE_GST_CHECK_FALSE@check-torture: |
| @HAVE_GST_CHECK_FALSE@ true |
| |
| win32-update: |
| cp $(top_builddir)/win32/common/config.h-new \ |
| $(top_srcdir)/win32/common/config.h |
| .PHONY: lcov-reset lcov lcov-run lcov-report lcov-upload lcov-clean |
| |
| # run lcov from scratch, always |
| lcov-reset: |
| $(MAKE) lcov-run |
| $(MAKE) lcov-report |
| |
| # run lcov from scratch if the dir is not there |
| lcov: |
| $(MAKE) lcov-reset |
| |
| # reset lcov stats |
| @GST_GCOV_ENABLED_TRUE@lcov-clean: |
| @GST_GCOV_ENABLED_TRUE@ @-rm -rf lcov |
| @GST_GCOV_ENABLED_TRUE@ lcov --directory . --zerocounters |
| |
| # reset run coverage tests |
| @GST_GCOV_ENABLED_TRUE@lcov-run: |
| @GST_GCOV_ENABLED_TRUE@ -$(MAKE) lcov-clean |
| @GST_GCOV_ENABLED_TRUE@ -if test -d tests/check; then $(MAKE) -C tests/check inspect; fi |
| @GST_GCOV_ENABLED_TRUE@ -$(MAKE) check |
| |
| # generate report based on current coverage data |
| @GST_GCOV_ENABLED_TRUE@lcov-report: |
| @GST_GCOV_ENABLED_TRUE@ mkdir lcov |
| @GST_GCOV_ENABLED_TRUE@ lcov --compat-libtool --directory . --capture --output-file lcov/lcov.info |
| @GST_GCOV_ENABLED_TRUE@ lcov --list-full-path -l lcov/lcov.info | grep -v "`cd $(top_srcdir) && pwd`" | cut -d\| -f1 > lcov/remove |
| @GST_GCOV_ENABLED_TRUE@ lcov --list-full-path -l lcov/lcov.info | grep "tests/check/" | cut -d\| -f1 >> lcov/remove |
| @GST_GCOV_ENABLED_TRUE@ lcov --list-full-path -l lcov/lcov.info | grep "docs/plugins/" | cut -d\| -f1 >> lcov/remove |
| @GST_GCOV_ENABLED_TRUE@ lcov -r lcov/lcov.info `cat lcov/remove` > lcov/lcov.cleaned.info |
| @GST_GCOV_ENABLED_TRUE@ rm lcov/remove |
| @GST_GCOV_ENABLED_TRUE@ mv lcov/lcov.cleaned.info lcov/lcov.info |
| @GST_GCOV_ENABLED_TRUE@ genhtml -t "$(PACKAGE_STRING)" -o lcov --num-spaces 2 lcov/lcov.info |
| |
| @GST_GCOV_ENABLED_TRUE@lcov-upload: lcov |
| @GST_GCOV_ENABLED_TRUE@ rsync -rvz -e ssh --delete lcov/* gstreamer.freedesktop.org:/srv/gstreamer.freedesktop.org/www/data/coverage/lcov/$(PACKAGE) |
| |
| @GST_GCOV_ENABLED_FALSE@lcov-run: |
| @GST_GCOV_ENABLED_FALSE@ echo "Need to reconfigure with --enable-gcov" |
| |
| @GST_GCOV_ENABLED_FALSE@lcov-report: |
| @GST_GCOV_ENABLED_FALSE@ echo "Need to reconfigure with --enable-gcov" |
| |
| check-cruft: |
| @cruft_files=""; cruft_dirs=""; \ |
| for f in $(CRUFT_FILES); do \ |
| if test -e $$f; then \ |
| cruft_files="$$cruft_files $$f"; \ |
| fi \ |
| done; \ |
| for d in $(CRUFT_DIRS); do \ |
| if test -e $$d; then \ |
| cruft_dirs="$$cruft_dirs $$d"; \ |
| fi \ |
| done; \ |
| if test "x$$cruft_files$$cruft_dirs" != x; then \ |
| echo; \ |
| echo "**** CRUFT ALERT *****"; \ |
| echo; \ |
| echo "The following files and directories may not be needed any "; \ |
| echo "longer (usually because a plugin has been merged into "; \ |
| echo "another plugin, moved to a different module, or been "; \ |
| echo "renamed), and you probably want to clean them up if you "; \ |
| echo "don't have local changes: "; \ |
| echo; \ |
| for f in $$cruft_files; do echo "file $$f"; done; \ |
| echo; \ |
| for d in $$cruft_dirs; do echo "directory $$d"; done; \ |
| echo; \ |
| echo "'make clean-cruft' will remove these for you."; \ |
| echo; \ |
| fi |
| |
| clean-cruft-dirs: |
| @for d in $(CRUFT_DIRS); do \ |
| if test -e $$d; then \ |
| rm -r "$$d" && echo "Removed directory $$d"; \ |
| fi \ |
| done |
| |
| clean-cruft-files: |
| @for f in $(CRUFT_FILES); do \ |
| if test -e $$f; then \ |
| rm "$$f" && echo "Removed file $$f"; \ |
| fi \ |
| done |
| |
| clean-cruft: clean-cruft-dirs clean-cruft-files |
| |
| # also might want to add this to your Makefile.am: |
| # |
| # all-local: check-cruft |
| |
| all-local: check-cruft |
| |
| # Tell versions [3.59,3.63) of GNU make to not export all variables. |
| # Otherwise a system limit (for SysV at least) may be exceeded. |
| .NOEXPORT: |
