| /* |
| * Farsight Voice+Video library |
| * |
| * Copyright 2007 Collabora Ltd, |
| * Copyright 2007 Nokia Corporation |
| * @author: Philippe Kalaf <philippe.kalaf@collabora.co.uk>. |
| * Copyright 2007 Wim Taymans <wim.taymans@gmail.com> |
| * Copyright 2015 Kurento (http://kurento.org/) |
| * @author: Miguel ParĂs <mparisdiaz@gmail.com> |
| * Copyright 2016 Pexip AS |
| * @author: Havard Graff <havard@pexip.com> |
| * @author: Stian Selnes <stian@pexip.com> |
| * |
| * This library is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU Library General Public |
| * License as published by the Free Software Foundation; either |
| * version 2 of the License, or (at your option) any later version. |
| * |
| * This library is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * Library General Public License for more details. |
| * |
| * You should have received a copy of the GNU Library General Public |
| * License along with this library; if not, write to the |
| * Free Software Foundation, Inc., 51 Franklin St, Fifth Floor, |
| * Boston, MA 02110-1301, USA. |
| * |
| */ |
| |
| /** |
| * SECTION:element-rtpjitterbuffer |
| * |
| * This element reorders and removes duplicate RTP packets as they are received |
| * from a network source. |
| * |
| * The element needs the clock-rate of the RTP payload in order to estimate the |
| * delay. This information is obtained either from the caps on the sink pad or, |
| * when no caps are present, from the #GstRtpJitterBuffer::request-pt-map signal. |
| * To clear the previous pt-map use the #GstRtpJitterBuffer::clear-pt-map signal. |
| * |
| * The rtpjitterbuffer will wait for missing packets up to a configurable time |
| * limit using the #GstRtpJitterBuffer:latency property. Packets arriving too |
| * late are considered to be lost packets. If the #GstRtpJitterBuffer:do-lost |
| * property is set, lost packets will result in a custom serialized downstream |
| * event of name GstRTPPacketLost. The lost packet events are usually used by a |
| * depayloader or other element to create concealment data or some other logic |
| * to gracefully handle the missing packets. |
| * |
| * The jitterbuffer will use the DTS (or PTS if no DTS is set) of the incomming |
| * buffer and the rtptime inside the RTP packet to create a PTS on the outgoing |
| * buffer. |
| * |
| * The jitterbuffer can also be configured to send early retransmission events |
| * upstream by setting the #GstRtpJitterBuffer:do-retransmission property. In |
| * this mode, the jitterbuffer tries to estimate when a packet should arrive and |
| * sends a custom upstream event named GstRTPRetransmissionRequest when the |
| * packet is considered late. The initial expected packet arrival time is |
| * calculated as follows: |
| * |
| * - If seqnum N arrived at time T, seqnum N+1 is expected to arrive at |
| * T + packet-spacing + #GstRtpJitterBuffer:rtx-delay. The packet spacing is |
| * calculated from the DTS (or PTS is no DTS) of two consecutive RTP |
| * packets with different rtptime. |
| * |
| * - If seqnum N0 arrived at time T0 and seqnum Nm arrived at time Tm, |
| * seqnum Ni is expected at time Ti = T0 + i*(Tm - T0)/(Nm - N0). Any |
| * previously scheduled timeout is overwritten. |
| * |
| * - If seqnum N arrived, all seqnum older than |
| * N - #GstRtpJitterBuffer:rtx-delay-reorder are considered late |
| * immediately. This is to request fast feedback for abonormally reorder |
| * packets before any of the previous timeouts is triggered. |
| * |
| * A late packet triggers the GstRTPRetransmissionRequest custom upstream |
| * event. After the initial timeout expires and the retransmission event is |
| * sent, the timeout is scheduled for |
| * T + #GstRtpJitterBuffer:rtx-retry-timeout. If the missing packet did not |
| * arrive after #GstRtpJitterBuffer:rtx-retry-timeout, a new |
| * GstRTPRetransmissionRequest is sent upstream and the timeout is rescheduled |
| * again for T + #GstRtpJitterBuffer:rtx-retry-timeout. This repeats until |
| * #GstRtpJitterBuffer:rtx-retry-period elapsed, at which point no further |
| * retransmission requests are sent and the regular logic is performed to |
| * schedule a lost packet as discussed above. |
| * |
| * This element acts as a live element and so adds #GstRtpJitterBuffer:latency |
| * to the pipeline. |
| * |
| * This element will automatically be used inside rtpbin. |
| * |
| * <refsect2> |
| * <title>Example pipelines</title> |
| * |[ |
| * gst-launch-1.0 rtspsrc location=rtsp://192.168.1.133:8554/mpeg1or2AudioVideoTest ! rtpjitterbuffer ! rtpmpvdepay ! mpeg2dec ! xvimagesink |
| * ]| Connect to a streaming server and decode the MPEG video. The jitterbuffer is |
| * inserted into the pipeline to smooth out network jitter and to reorder the |
| * out-of-order RTP packets. |
| * </refsect2> |
| */ |
| |
| #ifdef HAVE_CONFIG_H |
| #include "config.h" |
| #endif |
| |
| #include <stdlib.h> |
| #include <stdio.h> |
| #include <string.h> |
| #include <gst/rtp/gstrtpbuffer.h> |
| #include <gst/net/net.h> |
| |
| #include "gstrtpjitterbuffer.h" |
| #include "rtpjitterbuffer.h" |
| #include "rtpstats.h" |
| |
| #include <gst/glib-compat-private.h> |
| |
| GST_DEBUG_CATEGORY (rtpjitterbuffer_debug); |
| #define GST_CAT_DEFAULT (rtpjitterbuffer_debug) |
| |
| /* RTPJitterBuffer signals and args */ |
| enum |
| { |
| SIGNAL_REQUEST_PT_MAP, |
| SIGNAL_CLEAR_PT_MAP, |
| SIGNAL_HANDLE_SYNC, |
| SIGNAL_ON_NPT_STOP, |
| SIGNAL_SET_ACTIVE, |
| LAST_SIGNAL |
| }; |
| |
| #define DEFAULT_LATENCY_MS 200 |
| #define DEFAULT_DROP_ON_LATENCY FALSE |
| #define DEFAULT_TS_OFFSET 0 |
| #define DEFAULT_DO_LOST FALSE |
| #define DEFAULT_MODE RTP_JITTER_BUFFER_MODE_SLAVE |
| #define DEFAULT_PERCENT 0 |
| #define DEFAULT_DO_RETRANSMISSION FALSE |
| #define DEFAULT_RTX_NEXT_SEQNUM TRUE |
| #define DEFAULT_RTX_DELAY -1 |
| #define DEFAULT_RTX_MIN_DELAY 0 |
| #define DEFAULT_RTX_DELAY_REORDER 3 |
| #define DEFAULT_RTX_RETRY_TIMEOUT -1 |
| #define DEFAULT_RTX_MIN_RETRY_TIMEOUT -1 |
| #define DEFAULT_RTX_RETRY_PERIOD -1 |
| #define DEFAULT_RTX_MAX_RETRIES -1 |
| #define DEFAULT_RTX_DEADLINE -1 |
| #define DEFAULT_RTX_STATS_TIMEOUT 1000 |
| #define DEFAULT_MAX_RTCP_RTP_TIME_DIFF 1000 |
| #define DEFAULT_MAX_DROPOUT_TIME 60000 |
| #define DEFAULT_MAX_MISORDER_TIME 2000 |
| #define DEFAULT_RFC7273_SYNC FALSE |
| |
| #define DEFAULT_AUTO_RTX_DELAY (20 * GST_MSECOND) |
| #define DEFAULT_AUTO_RTX_TIMEOUT (40 * GST_MSECOND) |
| |
| enum |
| { |
| PROP_0, |
| PROP_LATENCY, |
| PROP_DROP_ON_LATENCY, |
| PROP_TS_OFFSET, |
| PROP_DO_LOST, |
| PROP_MODE, |
| PROP_PERCENT, |
| PROP_DO_RETRANSMISSION, |
| PROP_RTX_NEXT_SEQNUM, |
| PROP_RTX_DELAY, |
| PROP_RTX_MIN_DELAY, |
| PROP_RTX_DELAY_REORDER, |
| PROP_RTX_RETRY_TIMEOUT, |
| PROP_RTX_MIN_RETRY_TIMEOUT, |
| PROP_RTX_RETRY_PERIOD, |
| PROP_RTX_MAX_RETRIES, |
| PROP_RTX_DEADLINE, |
| PROP_RTX_STATS_TIMEOUT, |
| PROP_STATS, |
| PROP_MAX_RTCP_RTP_TIME_DIFF, |
| PROP_MAX_DROPOUT_TIME, |
| PROP_MAX_MISORDER_TIME, |
| PROP_RFC7273_SYNC |
| }; |
| |
| #define JBUF_LOCK(priv) G_STMT_START { \ |
| GST_TRACE("Locking from thread %p", g_thread_self()); \ |
| (g_mutex_lock (&(priv)->jbuf_lock)); \ |
| GST_TRACE("Locked from thread %p", g_thread_self()); \ |
| } G_STMT_END |
| |
| #define JBUF_LOCK_CHECK(priv,label) G_STMT_START { \ |
| JBUF_LOCK (priv); \ |
| if (G_UNLIKELY (priv->srcresult != GST_FLOW_OK)) \ |
| goto label; \ |
| } G_STMT_END |
| #define JBUF_UNLOCK(priv) G_STMT_START { \ |
| GST_TRACE ("Unlocking from thread %p", g_thread_self ()); \ |
| (g_mutex_unlock (&(priv)->jbuf_lock)); \ |
| } G_STMT_END |
| |
| #define JBUF_WAIT_TIMER(priv) G_STMT_START { \ |
| GST_DEBUG ("waiting timer"); \ |
| (priv)->waiting_timer = TRUE; \ |
| g_cond_wait (&(priv)->jbuf_timer, &(priv)->jbuf_lock); \ |
| (priv)->waiting_timer = FALSE; \ |
| GST_DEBUG ("waiting timer done"); \ |
| } G_STMT_END |
| #define JBUF_SIGNAL_TIMER(priv) G_STMT_START { \ |
| if (G_UNLIKELY ((priv)->waiting_timer)) { \ |
| GST_DEBUG ("signal timer"); \ |
| g_cond_signal (&(priv)->jbuf_timer); \ |
| } \ |
| } G_STMT_END |
| |
| #define JBUF_WAIT_EVENT(priv,label) G_STMT_START { \ |
| GST_DEBUG ("waiting event"); \ |
| (priv)->waiting_event = TRUE; \ |
| g_cond_wait (&(priv)->jbuf_event, &(priv)->jbuf_lock); \ |
| (priv)->waiting_event = FALSE; \ |
| GST_DEBUG ("waiting event done"); \ |
| if (G_UNLIKELY (priv->srcresult != GST_FLOW_OK)) \ |
| goto label; \ |
| } G_STMT_END |
| #define JBUF_SIGNAL_EVENT(priv) G_STMT_START { \ |
| if (G_UNLIKELY ((priv)->waiting_event)) { \ |
| GST_DEBUG ("signal event"); \ |
| g_cond_signal (&(priv)->jbuf_event); \ |
| } \ |
| } G_STMT_END |
| |
| #define JBUF_WAIT_QUERY(priv,label) G_STMT_START { \ |
| GST_DEBUG ("waiting query"); \ |
| (priv)->waiting_query = TRUE; \ |
| g_cond_wait (&(priv)->jbuf_query, &(priv)->jbuf_lock); \ |
| (priv)->waiting_query = FALSE; \ |
| GST_DEBUG ("waiting query done"); \ |
| if (G_UNLIKELY (priv->srcresult != GST_FLOW_OK)) \ |
| goto label; \ |
| } G_STMT_END |
| #define JBUF_SIGNAL_QUERY(priv,res) G_STMT_START { \ |
| (priv)->last_query = res; \ |
| if (G_UNLIKELY ((priv)->waiting_query)) { \ |
| GST_DEBUG ("signal query"); \ |
| g_cond_signal (&(priv)->jbuf_query); \ |
| } \ |
| } G_STMT_END |
| |
| #define GST_BUFFER_IS_RETRANSMISSION(buffer) \ |
| GST_BUFFER_FLAG_IS_SET (buffer, GST_RTP_BUFFER_FLAG_RETRANSMISSION) |
| |
| typedef struct TimerQueue |
| { |
| GQueue *timers; |
| GHashTable *hashtable; |
| } TimerQueue; |
| |
| struct _GstRtpJitterBufferPrivate |
| { |
| GstPad *sinkpad, *srcpad; |
| GstPad *rtcpsinkpad; |
| |
| RTPJitterBuffer *jbuf; |
| GMutex jbuf_lock; |
| gboolean waiting_timer; |
| GCond jbuf_timer; |
| gboolean waiting_event; |
| GCond jbuf_event; |
| gboolean waiting_query; |
| GCond jbuf_query; |
| gboolean last_query; |
| gboolean discont; |
| gboolean ts_discont; |
| gboolean active; |
| guint64 out_offset; |
| |
| gboolean timer_running; |
| GThread *timer_thread; |
| |
| /* properties */ |
| guint latency_ms; |
| guint64 latency_ns; |
| gboolean drop_on_latency; |
| gint64 ts_offset; |
| gboolean do_lost; |
| gboolean do_retransmission; |
| gboolean rtx_next_seqnum; |
| gint rtx_delay; |
| guint rtx_min_delay; |
| gint rtx_delay_reorder; |
| gint rtx_retry_timeout; |
| gint rtx_min_retry_timeout; |
| gint rtx_retry_period; |
| gint rtx_max_retries; |
| guint rtx_stats_timeout; |
| gint rtx_deadline_ms; |
| gint max_rtcp_rtp_time_diff; |
| guint32 max_dropout_time; |
| guint32 max_misorder_time; |
| |
| /* the last seqnum we pushed out */ |
| guint32 last_popped_seqnum; |
| /* the next expected seqnum we push */ |
| guint32 next_seqnum; |
| /* seqnum-base, if known */ |
| guint32 seqnum_base; |
| /* last output time */ |
| GstClockTime last_out_time; |
| /* last valid input timestamp and rtptime pair */ |
| GstClockTime ips_dts; |
| guint64 ips_rtptime; |
| GstClockTime packet_spacing; |
| gint equidistant; |
| |
| GQueue gap_packets; |
| |
| /* the next expected seqnum we receive */ |
| GstClockTime last_in_dts; |
| guint32 next_in_seqnum; |
| |
| GArray *timers; |
| TimerQueue *rtx_stats_timers; |
| |
| /* start and stop ranges */ |
| GstClockTime npt_start; |
| GstClockTime npt_stop; |
| guint64 ext_timestamp; |
| guint64 last_elapsed; |
| guint64 estimated_eos; |
| GstClockID eos_id; |
| |
| /* state */ |
| gboolean eos; |
| guint last_percent; |
| |
| /* clock rate and rtp timestamp offset */ |
| gint last_pt; |
| gint32 clock_rate; |
| gint64 clock_base; |
| gint64 prev_ts_offset; |
| |
| /* when we are shutting down */ |
| GstFlowReturn srcresult; |
| gboolean blocked; |
| |
| /* for sync */ |
| GstSegment segment; |
| GstClockID clock_id; |
| GstClockTime timer_timeout; |
| guint16 timer_seqnum; |
| /* the latency of the upstream peer, we have to take this into account when |
| * synchronizing the buffers. */ |
| GstClockTime peer_latency; |
| guint64 ext_rtptime; |
| GstBuffer *last_sr; |
| |
| /* some accounting */ |
| guint64 num_pushed; |
| guint64 num_lost; |
| guint64 num_late; |
| guint64 num_duplicates; |
| guint64 num_rtx_requests; |
| guint64 num_rtx_success; |
| guint64 num_rtx_failed; |
| gdouble avg_rtx_num; |
| guint64 avg_rtx_rtt; |
| RTPPacketRateCtx packet_rate_ctx; |
| |
| /* for the jitter */ |
| GstClockTime last_dts; |
| guint64 last_rtptime; |
| GstClockTime avg_jitter; |
| }; |
| |
| typedef enum |
| { |
| TIMER_TYPE_EXPECTED, |
| TIMER_TYPE_LOST, |
| TIMER_TYPE_DEADLINE, |
| TIMER_TYPE_EOS |
| } TimerType; |
| |
| typedef struct |
| { |
| guint idx; |
| guint16 seqnum; |
| guint num; |
| TimerType type; |
| GstClockTime timeout; |
| GstClockTime duration; |
| GstClockTime rtx_base; |
| GstClockTime rtx_delay; |
| GstClockTime rtx_retry; |
| GstClockTime rtx_last; |
| guint num_rtx_retry; |
| guint num_rtx_received; |
| } TimerData; |
| |
| #define GST_RTP_JITTER_BUFFER_GET_PRIVATE(o) \ |
| (G_TYPE_INSTANCE_GET_PRIVATE ((o), GST_TYPE_RTP_JITTER_BUFFER, \ |
| GstRtpJitterBufferPrivate)) |
| |
| static GstStaticPadTemplate gst_rtp_jitter_buffer_sink_template = |
| GST_STATIC_PAD_TEMPLATE ("sink", |
| GST_PAD_SINK, |
| GST_PAD_ALWAYS, |
| GST_STATIC_CAPS ("application/x-rtp" |
| /* "clock-rate = (int) [ 1, 2147483647 ], " |
| * "payload = (int) , " |
| * "encoding-name = (string) " |
| */ ) |
| ); |
| |
| static GstStaticPadTemplate gst_rtp_jitter_buffer_sink_rtcp_template = |
| GST_STATIC_PAD_TEMPLATE ("sink_rtcp", |
| GST_PAD_SINK, |
| GST_PAD_REQUEST, |
| GST_STATIC_CAPS ("application/x-rtcp") |
| ); |
| |
| static GstStaticPadTemplate gst_rtp_jitter_buffer_src_template = |
| GST_STATIC_PAD_TEMPLATE ("src", |
| GST_PAD_SRC, |
| GST_PAD_ALWAYS, |
| GST_STATIC_CAPS ("application/x-rtp" |
| /* "payload = (int) , " |
| * "clock-rate = (int) , " |
| * "encoding-name = (string) " |
| */ ) |
| ); |
| |
| static guint gst_rtp_jitter_buffer_signals[LAST_SIGNAL] = { 0 }; |
| |
| #define gst_rtp_jitter_buffer_parent_class parent_class |
| G_DEFINE_TYPE (GstRtpJitterBuffer, gst_rtp_jitter_buffer, GST_TYPE_ELEMENT); |
| |
| /* object overrides */ |
| static void gst_rtp_jitter_buffer_set_property (GObject * object, |
| guint prop_id, const GValue * value, GParamSpec * pspec); |
| static void gst_rtp_jitter_buffer_get_property (GObject * object, |
| guint prop_id, GValue * value, GParamSpec * pspec); |
| static void gst_rtp_jitter_buffer_finalize (GObject * object); |
| |
| /* element overrides */ |
| static GstStateChangeReturn gst_rtp_jitter_buffer_change_state (GstElement |
| * element, GstStateChange transition); |
| static GstPad *gst_rtp_jitter_buffer_request_new_pad (GstElement * element, |
| GstPadTemplate * templ, const gchar * name, const GstCaps * filter); |
| static void gst_rtp_jitter_buffer_release_pad (GstElement * element, |
| GstPad * pad); |
| static GstClock *gst_rtp_jitter_buffer_provide_clock (GstElement * element); |
| static gboolean gst_rtp_jitter_buffer_set_clock (GstElement * element, |
| GstClock * clock); |
| |
| /* pad overrides */ |
| static GstCaps *gst_rtp_jitter_buffer_getcaps (GstPad * pad, GstCaps * filter); |
| static GstIterator *gst_rtp_jitter_buffer_iterate_internal_links (GstPad * pad, |
| GstObject * parent); |
| |
| /* sinkpad overrides */ |
| static gboolean gst_rtp_jitter_buffer_sink_event (GstPad * pad, |
| GstObject * parent, GstEvent * event); |
| static GstFlowReturn gst_rtp_jitter_buffer_chain (GstPad * pad, |
| GstObject * parent, GstBuffer * buffer); |
| |
| static gboolean gst_rtp_jitter_buffer_sink_rtcp_event (GstPad * pad, |
| GstObject * parent, GstEvent * event); |
| static GstFlowReturn gst_rtp_jitter_buffer_chain_rtcp (GstPad * pad, |
| GstObject * parent, GstBuffer * buffer); |
| |
| static gboolean gst_rtp_jitter_buffer_sink_query (GstPad * pad, |
| GstObject * parent, GstQuery * query); |
| |
| /* srcpad overrides */ |
| static gboolean gst_rtp_jitter_buffer_src_event (GstPad * pad, |
| GstObject * parent, GstEvent * event); |
| static gboolean gst_rtp_jitter_buffer_src_activate_mode (GstPad * pad, |
| GstObject * parent, GstPadMode mode, gboolean active); |
| static void gst_rtp_jitter_buffer_loop (GstRtpJitterBuffer * jitterbuffer); |
| static gboolean gst_rtp_jitter_buffer_src_query (GstPad * pad, |
| GstObject * parent, GstQuery * query); |
| |
| static void |
| gst_rtp_jitter_buffer_clear_pt_map (GstRtpJitterBuffer * jitterbuffer); |
| static GstClockTime |
| gst_rtp_jitter_buffer_set_active (GstRtpJitterBuffer * jitterbuffer, |
| gboolean active, guint64 base_time); |
| static void do_handle_sync (GstRtpJitterBuffer * jitterbuffer); |
| |
| static void unschedule_current_timer (GstRtpJitterBuffer * jitterbuffer); |
| static void remove_all_timers (GstRtpJitterBuffer * jitterbuffer); |
| |
| static void wait_next_timeout (GstRtpJitterBuffer * jitterbuffer); |
| |
| static GstStructure *gst_rtp_jitter_buffer_create_stats (GstRtpJitterBuffer * |
| jitterbuffer); |
| |
| static void update_rtx_stats (GstRtpJitterBuffer * jitterbuffer, |
| TimerData * timer, GstClockTime dts, gboolean success); |
| |
| static TimerQueue *timer_queue_new (void); |
| static void timer_queue_free (TimerQueue * queue); |
| |
| static void |
| gst_rtp_jitter_buffer_class_init (GstRtpJitterBufferClass * klass) |
| { |
| GObjectClass *gobject_class; |
| GstElementClass *gstelement_class; |
| |
| gobject_class = (GObjectClass *) klass; |
| gstelement_class = (GstElementClass *) klass; |
| |
| g_type_class_add_private (klass, sizeof (GstRtpJitterBufferPrivate)); |
| |
| gobject_class->finalize = gst_rtp_jitter_buffer_finalize; |
| |
| gobject_class->set_property = gst_rtp_jitter_buffer_set_property; |
| gobject_class->get_property = gst_rtp_jitter_buffer_get_property; |
| |
| /** |
| * GstRtpJitterBuffer:latency: |
| * |
| * The maximum latency of the jitterbuffer. Packets will be kept in the buffer |
| * for at most this time. |
| */ |
| g_object_class_install_property (gobject_class, PROP_LATENCY, |
| g_param_spec_uint ("latency", "Buffer latency in ms", |
| "Amount of ms to buffer", 0, G_MAXUINT, DEFAULT_LATENCY_MS, |
| G_PARAM_READWRITE | G_PARAM_STATIC_STRINGS)); |
| /** |
| * GstRtpJitterBuffer:drop-on-latency: |
| * |
| * Drop oldest buffers when the queue is completely filled. |
| */ |
| g_object_class_install_property (gobject_class, PROP_DROP_ON_LATENCY, |
| g_param_spec_boolean ("drop-on-latency", |
| "Drop buffers when maximum latency is reached", |
| "Tells the jitterbuffer to never exceed the given latency in size", |
| DEFAULT_DROP_ON_LATENCY, G_PARAM_READWRITE | G_PARAM_STATIC_STRINGS)); |
| /** |
| * GstRtpJitterBuffer:ts-offset: |
| * |
| * Adjust GStreamer output buffer timestamps in the jitterbuffer with offset. |
| * This is mainly used to ensure interstream synchronisation. |
| */ |
| g_object_class_install_property (gobject_class, PROP_TS_OFFSET, |
| g_param_spec_int64 ("ts-offset", "Timestamp Offset", |
| "Adjust buffer timestamps with offset in nanoseconds", G_MININT64, |
| G_MAXINT64, DEFAULT_TS_OFFSET, |
| G_PARAM_READWRITE | G_PARAM_STATIC_STRINGS)); |
| |
| /** |
| * GstRtpJitterBuffer:do-lost: |
| * |
| * Send out a GstRTPPacketLost event downstream when a packet is considered |
| * lost. |
| */ |
| g_object_class_install_property (gobject_class, PROP_DO_LOST, |
| g_param_spec_boolean ("do-lost", "Do Lost", |
| "Send an event downstream when a packet is lost", DEFAULT_DO_LOST, |
| G_PARAM_READWRITE | G_PARAM_STATIC_STRINGS)); |
| |
| /** |
| * GstRtpJitterBuffer:mode: |
| * |
| * Control the buffering and timestamping mode used by the jitterbuffer. |
| */ |
| g_object_class_install_property (gobject_class, PROP_MODE, |
| g_param_spec_enum ("mode", "Mode", |
| "Control the buffering algorithm in use", RTP_TYPE_JITTER_BUFFER_MODE, |
| DEFAULT_MODE, G_PARAM_READWRITE | G_PARAM_STATIC_STRINGS)); |
| /** |
| * GstRtpJitterBuffer:percent: |
| * |
| * The percent of the jitterbuffer that is filled. |
| */ |
| g_object_class_install_property (gobject_class, PROP_PERCENT, |
| g_param_spec_int ("percent", "percent", |
| "The buffer filled percent", 0, 100, |
| 0, G_PARAM_READABLE | G_PARAM_STATIC_STRINGS)); |
| /** |
| * GstRtpJitterBuffer:do-retransmission: |
| * |
| * Send out a GstRTPRetransmission event upstream when a packet is considered |
| * late and should be retransmitted. |
| * |
| * Since: 1.2 |
| */ |
| g_object_class_install_property (gobject_class, PROP_DO_RETRANSMISSION, |
| g_param_spec_boolean ("do-retransmission", "Do Retransmission", |
| "Send retransmission events upstream when a packet is late", |
| DEFAULT_DO_RETRANSMISSION, |
| G_PARAM_READWRITE | G_PARAM_STATIC_STRINGS)); |
| |
| /** |
| * GstRtpJitterBuffer:rtx-next-seqnum |
| * |
| * Estimate when the next packet should arrive and schedule a retransmission |
| * request for it. |
| * This is, when packet N arrives, a GstRTPRetransmission event is schedule |
| * for packet N+1. So it will be requested if it does not arrive at the expected time. |
| * The expected time is calculated using the dts of N and the packet spacing. |
| * |
| * Since: 1.6 |
| */ |
| g_object_class_install_property (gobject_class, PROP_RTX_NEXT_SEQNUM, |
| g_param_spec_boolean ("rtx-next-seqnum", "RTX next seqnum", |
| "Estimate when the next packet should arrive and schedule a " |
| "retransmission request for it.", |
| DEFAULT_RTX_NEXT_SEQNUM, G_PARAM_READWRITE | G_PARAM_STATIC_STRINGS)); |
| |
| /** |
| * GstRtpJitterBuffer:rtx-delay: |
| * |
| * When a packet did not arrive at the expected time, wait this extra amount |
| * of time before sending a retransmission event. |
| * |
| * When -1 is used, the max jitter will be used as extra delay. |
| * |
| * Since: 1.2 |
| */ |
| g_object_class_install_property (gobject_class, PROP_RTX_DELAY, |
| g_param_spec_int ("rtx-delay", "RTX Delay", |
| "Extra time in ms to wait before sending retransmission " |
| "event (-1 automatic)", -1, G_MAXINT, DEFAULT_RTX_DELAY, |
| G_PARAM_READWRITE | G_PARAM_STATIC_STRINGS)); |
| |
| /** |
| * GstRtpJitterBuffer:rtx-min-delay: |
| * |
| * When a packet did not arrive at the expected time, wait at least this extra amount |
| * of time before sending a retransmission event. |
| * |
| * Since: 1.6 |
| */ |
| g_object_class_install_property (gobject_class, PROP_RTX_MIN_DELAY, |
| g_param_spec_uint ("rtx-min-delay", "Minimum RTX Delay", |
| "Minimum time in ms to wait before sending retransmission " |
| "event", 0, G_MAXUINT, DEFAULT_RTX_MIN_DELAY, |
| G_PARAM_READWRITE | G_PARAM_STATIC_STRINGS)); |
| /** |
| * GstRtpJitterBuffer:rtx-delay-reorder: |
| * |
| * Assume that a retransmission event should be sent when we see |
| * this much packet reordering. |
| * |
| * When -1 is used, the value will be estimated based on observed packet |
| * reordering. When 0 is used packet reordering alone will not cause a |
| * retransmission event (Since 1.10). |
| * |
| * Since: 1.2 |
| */ |
| g_object_class_install_property (gobject_class, PROP_RTX_DELAY_REORDER, |
| g_param_spec_int ("rtx-delay-reorder", "RTX Delay Reorder", |
| "Sending retransmission event when this much reordering " |
| "(0 disable, -1 automatic)", |
| -1, G_MAXINT, DEFAULT_RTX_DELAY_REORDER, |
| G_PARAM_READWRITE | G_PARAM_STATIC_STRINGS)); |
| /** |
| * GstRtpJitterBuffer::rtx-retry-timeout: |
| * |
| * When no packet has been received after sending a retransmission event |
| * for this time, retry sending a retransmission event. |
| * |
| * When -1 is used, the value will be estimated based on observed round |
| * trip time. |
| * |
| * Since: 1.2 |
| */ |
| g_object_class_install_property (gobject_class, PROP_RTX_RETRY_TIMEOUT, |
| g_param_spec_int ("rtx-retry-timeout", "RTX Retry Timeout", |
| "Retry sending a transmission event after this timeout in " |
| "ms (-1 automatic)", -1, G_MAXINT, DEFAULT_RTX_RETRY_TIMEOUT, |
| G_PARAM_READWRITE | G_PARAM_STATIC_STRINGS)); |
| /** |
| * GstRtpJitterBuffer::rtx-min-retry-timeout: |
| * |
| * The minimum amount of time between retry timeouts. When |
| * GstRtpJitterBuffer::rtx-retry-timeout is -1, this value ensures a |
| * minimum interval between retry timeouts. |
| * |
| * When -1 is used, the value will be estimated based on the |
| * packet spacing. |
| * |
| * Since: 1.6 |
| */ |
| g_object_class_install_property (gobject_class, PROP_RTX_MIN_RETRY_TIMEOUT, |
| g_param_spec_int ("rtx-min-retry-timeout", "RTX Min Retry Timeout", |
| "Minimum timeout between sending a transmission event in " |
| "ms (-1 automatic)", -1, G_MAXINT, DEFAULT_RTX_MIN_RETRY_TIMEOUT, |
| G_PARAM_READWRITE | G_PARAM_STATIC_STRINGS)); |
| /** |
| * GstRtpJitterBuffer:rtx-retry-period: |
| * |
| * The amount of time to try to get a retransmission. |
| * |
| * When -1 is used, the value will be estimated based on the jitterbuffer |
| * latency and the observed round trip time. |
| * |
| * Since: 1.2 |
| */ |
| g_object_class_install_property (gobject_class, PROP_RTX_RETRY_PERIOD, |
| g_param_spec_int ("rtx-retry-period", "RTX Retry Period", |
| "Try to get a retransmission for this many ms " |
| "(-1 automatic)", -1, G_MAXINT, DEFAULT_RTX_RETRY_PERIOD, |
| G_PARAM_READWRITE | G_PARAM_STATIC_STRINGS)); |
| /** |
| * GstRtpJitterBuffer:rtx-max-retries: |
| * |
| * The maximum number of retries to request a retransmission. |
| * |
| * This implies that as maximum (rtx-max-retries + 1) retransmissions will be requested. |
| * When -1 is used, the number of retransmission request will not be limited. |
| * |
| * Since: 1.6 |
| */ |
| g_object_class_install_property (gobject_class, PROP_RTX_MAX_RETRIES, |
| g_param_spec_int ("rtx-max-retries", "RTX Max Retries", |
| "The maximum number of retries to request a retransmission. " |
| "(-1 not limited)", -1, G_MAXINT, DEFAULT_RTX_MAX_RETRIES, |
| G_PARAM_READWRITE | G_PARAM_STATIC_STRINGS)); |
| /** |
| * GstRtpJitterBuffer:rtx-deadline: |
| * |
| * The deadline for a valid RTX request in ms. |
| * |
| * How long the RTX RTCP will be valid for. |
| * When -1 is used, the size of the jitterbuffer will be used. |
| * |
| * Since: 1.10 |
| */ |
| g_object_class_install_property (gobject_class, PROP_RTX_DEADLINE, |
| g_param_spec_int ("rtx-deadline", "RTX Deadline (ms)", |
| "The deadline for a valid RTX request in milliseconds. " |
| "(-1 automatic)", -1, G_MAXINT, DEFAULT_RTX_DEADLINE, |
| G_PARAM_READWRITE | G_PARAM_STATIC_STRINGS)); |
| /** |
| * GstRtpJitterBuffer::rtx-stats-timeout: |
| * |
| * The time to wait for a retransmitted packet after it has been |
| * considered lost in order to collect RTX statistics. |
| * |
| * Since: 1.10 |
| */ |
| g_object_class_install_property (gobject_class, PROP_RTX_STATS_TIMEOUT, |
| g_param_spec_uint ("rtx-stats-timeout", "RTX Statistics Timeout", |
| "The time to wait for a retransmitted packet after it has been " |
| "considered lost in order to collect statistics (ms)", |
| 0, G_MAXUINT, DEFAULT_RTX_STATS_TIMEOUT, |
| G_PARAM_READWRITE | G_PARAM_STATIC_STRINGS)); |
| |
| g_object_class_install_property (gobject_class, PROP_MAX_DROPOUT_TIME, |
| g_param_spec_uint ("max-dropout-time", "Max dropout time", |
| "The maximum time (milliseconds) of missing packets tolerated.", |
| 0, G_MAXUINT, DEFAULT_MAX_DROPOUT_TIME, |
| G_PARAM_READWRITE | G_PARAM_STATIC_STRINGS)); |
| |
| g_object_class_install_property (gobject_class, PROP_MAX_MISORDER_TIME, |
| g_param_spec_uint ("max-misorder-time", "Max misorder time", |
| "The maximum time (milliseconds) of misordered packets tolerated.", |
| 0, G_MAXUINT, DEFAULT_MAX_MISORDER_TIME, |
| G_PARAM_READWRITE | G_PARAM_STATIC_STRINGS)); |
| /** |
| * GstRtpJitterBuffer:stats: |
| * |
| * Various jitterbuffer statistics. This property returns a GstStructure |
| * with name application/x-rtp-jitterbuffer-stats with the following fields: |
| * |
| * <itemizedlist> |
| * <listitem> |
| * <para> |
| * #guint64 |
| * <classname>"num-pushed"</classname>: |
| * the number of packets pushed out. |
| * </para> |
| * </listitem> |
| * <listitem> |
| * <para> |
| * #guint64 |
| * <classname>"num-lost"</classname>: |
| * the number of packets considered lost. |
| * </para> |
| * </listitem> |
| * <listitem> |
| * <para> |
| * #guint64 |
| * <classname>"num-late"</classname>: |
| * the number of packets arriving too late. |
| * </para> |
| * </listitem> |
| * <listitem> |
| * <para> |
| * #guint64 |
| * <classname>"num-duplicates"</classname>: |
| * the number of duplicate packets. |
| * </para> |
| * </listitem> |
| * <listitem> |
| * <para> |
| * #guint64 |
| * <classname>"rtx-count"</classname>: |
| * the number of retransmissions requested. |
| * </para> |
| * </listitem> |
| * <listitem> |
| * <para> |
| * #guint64 |
| * <classname>"rtx-success-count"</classname>: |
| * the number of successful retransmissions. |
| * </para> |
| * </listitem> |
| * <listitem> |
| * <para> |
| * #gdouble |
| * <classname>"rtx-per-packet"</classname>: |
| * average number of RTX per packet. |
| * </para> |
| * </listitem> |
| * <listitem> |
| * <para> |
| * #guint64 |
| * <classname>"rtx-rtt"</classname>: |
| * average round trip time per RTX. |
| * </para> |
| * </listitem> |
| * </itemizedlist> |
| * |
| * Since: 1.4 |
| */ |
| g_object_class_install_property (gobject_class, PROP_STATS, |
| g_param_spec_boxed ("stats", "Statistics", |
| "Various statistics", GST_TYPE_STRUCTURE, |
| G_PARAM_READABLE | G_PARAM_STATIC_STRINGS)); |
| |
| /** |
| * GstRtpJitterBuffer:max-rtcp-rtp-time-diff |
| * |
| * The maximum amount of time in ms that the RTP time in the RTCP SRs |
| * is allowed to be ahead of the last RTP packet we received. Use |
| * -1 to disable ignoring of RTCP packets. |
| * |
| * Since: 1.8 |
| */ |
| g_object_class_install_property (gobject_class, PROP_MAX_RTCP_RTP_TIME_DIFF, |
| g_param_spec_int ("max-rtcp-rtp-time-diff", "Max RTCP RTP Time Diff", |
| "Maximum amount of time in ms that the RTP time in RTCP SRs " |
| "is allowed to be ahead (-1 disabled)", -1, G_MAXINT, |
| DEFAULT_MAX_RTCP_RTP_TIME_DIFF, |
| G_PARAM_READWRITE | G_PARAM_STATIC_STRINGS)); |
| |
| g_object_class_install_property (gobject_class, PROP_RFC7273_SYNC, |
| g_param_spec_boolean ("rfc7273-sync", "Sync on RFC7273 clock", |
| "Synchronize received streams to the RFC7273 clock " |
| "(requires clock and offset to be provided)", DEFAULT_RFC7273_SYNC, |
| G_PARAM_READWRITE | G_PARAM_STATIC_STRINGS)); |
| |
| /** |
| * GstRtpJitterBuffer::request-pt-map: |
| * @buffer: the object which received the signal |
| * @pt: the pt |
| * |
| * Request the payload type as #GstCaps for @pt. |
| */ |
| gst_rtp_jitter_buffer_signals[SIGNAL_REQUEST_PT_MAP] = |
| g_signal_new ("request-pt-map", G_TYPE_FROM_CLASS (klass), |
| G_SIGNAL_RUN_LAST, G_STRUCT_OFFSET (GstRtpJitterBufferClass, |
| request_pt_map), NULL, NULL, g_cclosure_marshal_generic, |
| GST_TYPE_CAPS, 1, G_TYPE_UINT); |
| /** |
| * GstRtpJitterBuffer::handle-sync: |
| * @buffer: the object which received the signal |
| * @struct: a GstStructure containing sync values. |
| * |
| * Be notified of new sync values. |
| */ |
| gst_rtp_jitter_buffer_signals[SIGNAL_HANDLE_SYNC] = |
| g_signal_new ("handle-sync", G_TYPE_FROM_CLASS (klass), |
| G_SIGNAL_RUN_LAST, G_STRUCT_OFFSET (GstRtpJitterBufferClass, |
| handle_sync), NULL, NULL, g_cclosure_marshal_VOID__BOXED, |
| G_TYPE_NONE, 1, GST_TYPE_STRUCTURE | G_SIGNAL_TYPE_STATIC_SCOPE); |
| |
| /** |
| * GstRtpJitterBuffer::on-npt-stop: |
| * @buffer: the object which received the signal |
| * |
| * Signal that the jitterbufer has pushed the RTP packet that corresponds to |
| * the npt-stop position. |
| */ |
| gst_rtp_jitter_buffer_signals[SIGNAL_ON_NPT_STOP] = |
| g_signal_new ("on-npt-stop", G_TYPE_FROM_CLASS (klass), |
| G_SIGNAL_RUN_LAST, G_STRUCT_OFFSET (GstRtpJitterBufferClass, |
| on_npt_stop), NULL, NULL, g_cclosure_marshal_VOID__VOID, |
| G_TYPE_NONE, 0, G_TYPE_NONE); |
| |
| /** |
| * GstRtpJitterBuffer::clear-pt-map: |
| * @buffer: the object which received the signal |
| * |
| * Invalidate the clock-rate as obtained with the |
| * #GstRtpJitterBuffer::request-pt-map signal. |
| */ |
| gst_rtp_jitter_buffer_signals[SIGNAL_CLEAR_PT_MAP] = |
| g_signal_new ("clear-pt-map", G_TYPE_FROM_CLASS (klass), |
| G_SIGNAL_RUN_LAST | G_SIGNAL_ACTION, |
| G_STRUCT_OFFSET (GstRtpJitterBufferClass, clear_pt_map), NULL, NULL, |
| g_cclosure_marshal_VOID__VOID, G_TYPE_NONE, 0, G_TYPE_NONE); |
| |
| /** |
| * GstRtpJitterBuffer::set-active: |
| * @buffer: the object which received the signal |
| * |
| * Start pushing out packets with the given base time. This signal is only |
| * useful in buffering mode. |
| * |
| * Returns: the time of the last pushed packet. |
| */ |
| gst_rtp_jitter_buffer_signals[SIGNAL_SET_ACTIVE] = |
| g_signal_new ("set-active", G_TYPE_FROM_CLASS (klass), |
| G_SIGNAL_RUN_LAST | G_SIGNAL_ACTION, |
| G_STRUCT_OFFSET (GstRtpJitterBufferClass, set_active), NULL, NULL, |
| g_cclosure_marshal_generic, G_TYPE_UINT64, 2, G_TYPE_BOOLEAN, |
| G_TYPE_UINT64); |
| |
| gstelement_class->change_state = |
| GST_DEBUG_FUNCPTR (gst_rtp_jitter_buffer_change_state); |
| gstelement_class->request_new_pad = |
| GST_DEBUG_FUNCPTR (gst_rtp_jitter_buffer_request_new_pad); |
| gstelement_class->release_pad = |
| GST_DEBUG_FUNCPTR (gst_rtp_jitter_buffer_release_pad); |
| gstelement_class->provide_clock = |
| GST_DEBUG_FUNCPTR (gst_rtp_jitter_buffer_provide_clock); |
| gstelement_class->set_clock = |
| GST_DEBUG_FUNCPTR (gst_rtp_jitter_buffer_set_clock); |
| |
| gst_element_class_add_static_pad_template (gstelement_class, |
| &gst_rtp_jitter_buffer_src_template); |
| gst_element_class_add_static_pad_template (gstelement_class, |
| &gst_rtp_jitter_buffer_sink_template); |
| gst_element_class_add_static_pad_template (gstelement_class, |
| &gst_rtp_jitter_buffer_sink_rtcp_template); |
| |
| gst_element_class_set_static_metadata (gstelement_class, |
| "RTP packet jitter-buffer", "Filter/Network/RTP", |
| "A buffer that deals with network jitter and other transmission faults", |
| "Philippe Kalaf <philippe.kalaf@collabora.co.uk>, " |
| "Wim Taymans <wim.taymans@gmail.com>"); |
| |
| klass->clear_pt_map = GST_DEBUG_FUNCPTR (gst_rtp_jitter_buffer_clear_pt_map); |
| klass->set_active = GST_DEBUG_FUNCPTR (gst_rtp_jitter_buffer_set_active); |
| |
| GST_DEBUG_CATEGORY_INIT |
| (rtpjitterbuffer_debug, "rtpjitterbuffer", 0, "RTP Jitter Buffer"); |
| } |
| |
| static void |
| gst_rtp_jitter_buffer_init (GstRtpJitterBuffer * jitterbuffer) |
| { |
| GstRtpJitterBufferPrivate *priv; |
| |
| priv = GST_RTP_JITTER_BUFFER_GET_PRIVATE (jitterbuffer); |
| jitterbuffer->priv = priv; |
| |
| priv->latency_ms = DEFAULT_LATENCY_MS; |
| priv->latency_ns = priv->latency_ms * GST_MSECOND; |
| priv->drop_on_latency = DEFAULT_DROP_ON_LATENCY; |
| priv->do_lost = DEFAULT_DO_LOST; |
| priv->do_retransmission = DEFAULT_DO_RETRANSMISSION; |
| priv->rtx_next_seqnum = DEFAULT_RTX_NEXT_SEQNUM; |
| priv->rtx_delay = DEFAULT_RTX_DELAY; |
| priv->rtx_min_delay = DEFAULT_RTX_MIN_DELAY; |
| priv->rtx_delay_reorder = DEFAULT_RTX_DELAY_REORDER; |
| priv->rtx_retry_timeout = DEFAULT_RTX_RETRY_TIMEOUT; |
| priv->rtx_min_retry_timeout = DEFAULT_RTX_MIN_RETRY_TIMEOUT; |
| priv->rtx_retry_period = DEFAULT_RTX_RETRY_PERIOD; |
| priv->rtx_max_retries = DEFAULT_RTX_MAX_RETRIES; |
| priv->rtx_deadline_ms = DEFAULT_RTX_DEADLINE; |
| priv->rtx_stats_timeout = DEFAULT_RTX_STATS_TIMEOUT; |
| priv->max_rtcp_rtp_time_diff = DEFAULT_MAX_RTCP_RTP_TIME_DIFF; |
| priv->max_dropout_time = DEFAULT_MAX_DROPOUT_TIME; |
| priv->max_misorder_time = DEFAULT_MAX_MISORDER_TIME; |
| |
| priv->last_dts = -1; |
| priv->last_rtptime = -1; |
| priv->avg_jitter = 0; |
| priv->timers = g_array_new (FALSE, TRUE, sizeof (TimerData)); |
| priv->rtx_stats_timers = timer_queue_new (); |
| priv->jbuf = rtp_jitter_buffer_new (); |
| g_mutex_init (&priv->jbuf_lock); |
| g_cond_init (&priv->jbuf_timer); |
| g_cond_init (&priv->jbuf_event); |
| g_cond_init (&priv->jbuf_query); |
| g_queue_init (&priv->gap_packets); |
| gst_segment_init (&priv->segment, GST_FORMAT_TIME); |
| |
| /* reset skew detection initialy */ |
| rtp_jitter_buffer_reset_skew (priv->jbuf); |
| rtp_jitter_buffer_set_delay (priv->jbuf, priv->latency_ns); |
| rtp_jitter_buffer_set_buffering (priv->jbuf, FALSE); |
| priv->active = TRUE; |
| |
| priv->srcpad = |
| gst_pad_new_from_static_template (&gst_rtp_jitter_buffer_src_template, |
| "src"); |
| |
| gst_pad_set_activatemode_function (priv->srcpad, |
| GST_DEBUG_FUNCPTR (gst_rtp_jitter_buffer_src_activate_mode)); |
| gst_pad_set_query_function (priv->srcpad, |
| GST_DEBUG_FUNCPTR (gst_rtp_jitter_buffer_src_query)); |
| gst_pad_set_event_function (priv->srcpad, |
| GST_DEBUG_FUNCPTR (gst_rtp_jitter_buffer_src_event)); |
| |
| priv->sinkpad = |
| gst_pad_new_from_static_template (&gst_rtp_jitter_buffer_sink_template, |
| "sink"); |
| |
| gst_pad_set_chain_function (priv->sinkpad, |
| GST_DEBUG_FUNCPTR (gst_rtp_jitter_buffer_chain)); |
| gst_pad_set_event_function (priv->sinkpad, |
| GST_DEBUG_FUNCPTR (gst_rtp_jitter_buffer_sink_event)); |
| gst_pad_set_query_function (priv->sinkpad, |
| GST_DEBUG_FUNCPTR (gst_rtp_jitter_buffer_sink_query)); |
| |
| gst_element_add_pad (GST_ELEMENT (jitterbuffer), priv->srcpad); |
| gst_element_add_pad (GST_ELEMENT (jitterbuffer), priv->sinkpad); |
| |
| GST_OBJECT_FLAG_SET (jitterbuffer, GST_ELEMENT_FLAG_PROVIDE_CLOCK); |
| } |
| |
| #define IS_DROPABLE(it) (((it)->type == ITEM_TYPE_BUFFER) || ((it)->type == ITEM_TYPE_LOST)) |
| |
| #define ITEM_TYPE_BUFFER 0 |
| #define ITEM_TYPE_LOST 1 |
| #define ITEM_TYPE_EVENT 2 |
| #define ITEM_TYPE_QUERY 3 |
| |
| static RTPJitterBufferItem * |
| alloc_item (gpointer data, guint type, GstClockTime dts, GstClockTime pts, |
| guint seqnum, guint count, guint rtptime) |
| { |
| RTPJitterBufferItem *item; |
| |
| item = g_slice_new (RTPJitterBufferItem); |
| item->data = data; |
| item->next = NULL; |
| item->prev = NULL; |
| item->type = type; |
| item->dts = dts; |
| item->pts = pts; |
| item->seqnum = seqnum; |
| item->count = count; |
| item->rtptime = rtptime; |
| |
| return item; |
| } |
| |
| static void |
| free_item (RTPJitterBufferItem * item) |
| { |
| g_return_if_fail (item != NULL); |
| |
| if (item->data && item->type != ITEM_TYPE_QUERY) |
| gst_mini_object_unref (item->data); |
| g_slice_free (RTPJitterBufferItem, item); |
| } |
| |
| static void |
| free_item_and_retain_events (RTPJitterBufferItem * item, gpointer user_data) |
| { |
| GList **l = user_data; |
| |
| if (item->data && item->type == ITEM_TYPE_EVENT |
| && GST_EVENT_IS_STICKY (item->data)) { |
| *l = g_list_prepend (*l, item->data); |
| } else if (item->data && item->type != ITEM_TYPE_QUERY) { |
| gst_mini_object_unref (item->data); |
| } |
| g_slice_free (RTPJitterBufferItem, item); |
| } |
| |
| static void |
| gst_rtp_jitter_buffer_finalize (GObject * object) |
| { |
| GstRtpJitterBuffer *jitterbuffer; |
| GstRtpJitterBufferPrivate *priv; |
| |
| jitterbuffer = GST_RTP_JITTER_BUFFER (object); |
| priv = jitterbuffer->priv; |
| |
| g_array_free (priv->timers, TRUE); |
| timer_queue_free (priv->rtx_stats_timers); |
| g_mutex_clear (&priv->jbuf_lock); |
| g_cond_clear (&priv->jbuf_timer); |
| g_cond_clear (&priv->jbuf_event); |
| g_cond_clear (&priv->jbuf_query); |
| |
| rtp_jitter_buffer_flush (priv->jbuf, (GFunc) free_item, NULL); |
| g_queue_foreach (&priv->gap_packets, (GFunc) gst_buffer_unref, NULL); |
| g_queue_clear (&priv->gap_packets); |
| g_object_unref (priv->jbuf); |
| |
| G_OBJECT_CLASS (parent_class)->finalize (object); |
| } |
| |
| static GstIterator * |
| gst_rtp_jitter_buffer_iterate_internal_links (GstPad * pad, GstObject * parent) |
| { |
| GstRtpJitterBuffer *jitterbuffer; |
| GstPad *otherpad = NULL; |
| GstIterator *it = NULL; |
| GValue val = { 0, }; |
| |
| jitterbuffer = GST_RTP_JITTER_BUFFER_CAST (parent); |
| |
| if (pad == jitterbuffer->priv->sinkpad) { |
| otherpad = jitterbuffer->priv->srcpad; |
| } else if (pad == jitterbuffer->priv->srcpad) { |
| otherpad = jitterbuffer->priv->sinkpad; |
| } else if (pad == jitterbuffer->priv->rtcpsinkpad) { |
| it = gst_iterator_new_single (GST_TYPE_PAD, NULL); |
| } |
| |
| if (it == NULL) { |
| g_value_init (&val, GST_TYPE_PAD); |
| g_value_set_object (&val, otherpad); |
| it = gst_iterator_new_single (GST_TYPE_PAD, &val); |
| g_value_unset (&val); |
| } |
| |
| return it; |
| } |
| |
| static GstPad * |
| create_rtcp_sink (GstRtpJitterBuffer * jitterbuffer) |
| { |
| GstRtpJitterBufferPrivate *priv; |
| |
| priv = jitterbuffer->priv; |
| |
| GST_DEBUG_OBJECT (jitterbuffer, "creating RTCP sink pad"); |
| |
| priv->rtcpsinkpad = |
| gst_pad_new_from_static_template |
| (&gst_rtp_jitter_buffer_sink_rtcp_template, "sink_rtcp"); |
| gst_pad_set_chain_function (priv->rtcpsinkpad, |
| gst_rtp_jitter_buffer_chain_rtcp); |
| gst_pad_set_event_function (priv->rtcpsinkpad, |
| (GstPadEventFunction) gst_rtp_jitter_buffer_sink_rtcp_event); |
| gst_pad_set_iterate_internal_links_function (priv->rtcpsinkpad, |
| gst_rtp_jitter_buffer_iterate_internal_links); |
| gst_pad_set_active (priv->rtcpsinkpad, TRUE); |
| gst_element_add_pad (GST_ELEMENT_CAST (jitterbuffer), priv->rtcpsinkpad); |
| |
| return priv->rtcpsinkpad; |
| } |
| |
| static void |
| remove_rtcp_sink (GstRtpJitterBuffer * jitterbuffer) |
| { |
| GstRtpJitterBufferPrivate *priv; |
| |
| priv = jitterbuffer->priv; |
| |
| GST_DEBUG_OBJECT (jitterbuffer, "removing RTCP sink pad"); |
| |
| gst_pad_set_active (priv->rtcpsinkpad, FALSE); |
| |
| gst_element_remove_pad (GST_ELEMENT_CAST (jitterbuffer), priv->rtcpsinkpad); |
| priv->rtcpsinkpad = NULL; |
| } |
| |
| static GstPad * |
| gst_rtp_jitter_buffer_request_new_pad (GstElement * element, |
| GstPadTemplate * templ, const gchar * name, const GstCaps * filter) |
| { |
| GstRtpJitterBuffer *jitterbuffer; |
| GstElementClass *klass; |
| GstPad *result; |
| GstRtpJitterBufferPrivate *priv; |
| |
| g_return_val_if_fail (templ != NULL, NULL); |
| g_return_val_if_fail (GST_IS_RTP_JITTER_BUFFER (element), NULL); |
| |
| jitterbuffer = GST_RTP_JITTER_BUFFER_CAST (element); |
| priv = jitterbuffer->priv; |
| klass = GST_ELEMENT_GET_CLASS (element); |
| |
| GST_DEBUG_OBJECT (element, "requesting pad %s", GST_STR_NULL (name)); |
| |
| /* figure out the template */ |
| if (templ == gst_element_class_get_pad_template (klass, "sink_rtcp")) { |
| if (priv->rtcpsinkpad != NULL) |
| goto exists; |
| |
| result = create_rtcp_sink (jitterbuffer); |
| } else |
| goto wrong_template; |
| |
| return result; |
| |
| /* ERRORS */ |
| wrong_template: |
| { |
| g_warning ("rtpjitterbuffer: this is not our template"); |
| return NULL; |
| } |
| exists: |
| { |
| g_warning ("rtpjitterbuffer: pad already requested"); |
| return NULL; |
| } |
| } |
| |
| static void |
| gst_rtp_jitter_buffer_release_pad (GstElement * element, GstPad * pad) |
| { |
| GstRtpJitterBuffer *jitterbuffer; |
| GstRtpJitterBufferPrivate *priv; |
| |
| g_return_if_fail (GST_IS_RTP_JITTER_BUFFER (element)); |
| g_return_if_fail (GST_IS_PAD (pad)); |
| |
| jitterbuffer = GST_RTP_JITTER_BUFFER_CAST (element); |
| priv = jitterbuffer->priv; |
| |
| GST_DEBUG_OBJECT (element, "releasing pad %s:%s", GST_DEBUG_PAD_NAME (pad)); |
| |
| if (priv->rtcpsinkpad == pad) { |
| remove_rtcp_sink (jitterbuffer); |
| } else |
| goto wrong_pad; |
| |
| return; |
| |
| /* ERRORS */ |
| wrong_pad: |
| { |
| g_warning ("gstjitterbuffer: asked to release an unknown pad"); |
| return; |
| } |
| } |
| |
| static GstClock * |
| gst_rtp_jitter_buffer_provide_clock (GstElement * element) |
| { |
| return gst_system_clock_obtain (); |
| } |
| |
| static gboolean |
| gst_rtp_jitter_buffer_set_clock (GstElement * element, GstClock * clock) |
| { |
| GstRtpJitterBuffer *jitterbuffer = GST_RTP_JITTER_BUFFER (element); |
| |
| rtp_jitter_buffer_set_pipeline_clock (jitterbuffer->priv->jbuf, clock); |
| |
| return GST_ELEMENT_CLASS (parent_class)->set_clock (element, clock); |
| } |
| |
| static void |
| gst_rtp_jitter_buffer_clear_pt_map (GstRtpJitterBuffer * jitterbuffer) |
| { |
| GstRtpJitterBufferPrivate *priv; |
| |
| priv = jitterbuffer->priv; |
| |
| /* this will trigger a new pt-map request signal, FIXME, do something better. */ |
| |
| JBUF_LOCK (priv); |
| priv->clock_rate = -1; |
| /* do not clear current content, but refresh state for new arrival */ |
| GST_DEBUG_OBJECT (jitterbuffer, "reset jitterbuffer"); |
| rtp_jitter_buffer_reset_skew (priv->jbuf); |
| JBUF_UNLOCK (priv); |
| } |
| |
| static GstClockTime |
| gst_rtp_jitter_buffer_set_active (GstRtpJitterBuffer * jbuf, gboolean active, |
| guint64 offset) |
| { |
| GstRtpJitterBufferPrivate *priv; |
| GstClockTime last_out; |
| RTPJitterBufferItem *item; |
| |
| priv = jbuf->priv; |
| |
| JBUF_LOCK (priv); |
| GST_DEBUG_OBJECT (jbuf, "setting active %d with offset %" GST_TIME_FORMAT, |
| active, GST_TIME_ARGS (offset)); |
| |
| if (active != priv->active) { |
| /* add the amount of time spent in paused to the output offset. All |
| * outgoing buffers will have this offset applied to their timestamps in |
| * order to make them arrive in time in the sink. */ |
| priv->out_offset = offset; |
| GST_DEBUG_OBJECT (jbuf, "out offset %" GST_TIME_FORMAT, |
| GST_TIME_ARGS (priv->out_offset)); |
| priv->active = active; |
| JBUF_SIGNAL_EVENT (priv); |
| } |
| if (!active) { |
| rtp_jitter_buffer_set_buffering (priv->jbuf, TRUE); |
| } |
| if ((item = rtp_jitter_buffer_peek (priv->jbuf))) { |
| /* head buffer timestamp and offset gives our output time */ |
| last_out = item->dts + priv->ts_offset; |
| } else { |
| /* use last known time when the buffer is empty */ |
| last_out = priv->last_out_time; |
| } |
| JBUF_UNLOCK (priv); |
| |
| return last_out; |
| } |
| |
| static GstCaps * |
| gst_rtp_jitter_buffer_getcaps (GstPad * pad, GstCaps * filter) |
| { |
| GstRtpJitterBuffer *jitterbuffer; |
| GstRtpJitterBufferPrivate *priv; |
| GstPad *other; |
| GstCaps *caps; |
| GstCaps *templ; |
| |
| jitterbuffer = GST_RTP_JITTER_BUFFER (gst_pad_get_parent (pad)); |
| priv = jitterbuffer->priv; |
| |
| other = (pad == priv->srcpad ? priv->sinkpad : priv->srcpad); |
| |
| caps = gst_pad_peer_query_caps (other, filter); |
| |
| templ = gst_pad_get_pad_template_caps (pad); |
| if (caps == NULL) { |
| GST_DEBUG_OBJECT (jitterbuffer, "use template"); |
| caps = templ; |
| } else { |
| GstCaps *intersect; |
| |
| GST_DEBUG_OBJECT (jitterbuffer, "intersect with template"); |
| |
| intersect = gst_caps_intersect (caps, templ); |
| gst_caps_unref (caps); |
| gst_caps_unref (templ); |
| |
| caps = intersect; |
| } |
| gst_object_unref (jitterbuffer); |
| |
| return caps; |
| } |
| |
| /* |
| * Must be called with JBUF_LOCK held |
| */ |
| |
| static gboolean |
| gst_jitter_buffer_sink_parse_caps (GstRtpJitterBuffer * jitterbuffer, |
| GstCaps * caps, gint pt) |
| { |
| GstRtpJitterBufferPrivate *priv; |
| GstStructure *caps_struct; |
| guint val; |
| gint payload = -1; |
| GstClockTime tval; |
| const gchar *ts_refclk, *mediaclk; |
| |
| priv = jitterbuffer->priv; |
| |
| /* first parse the caps */ |
| caps_struct = gst_caps_get_structure (caps, 0); |
| |
| GST_DEBUG_OBJECT (jitterbuffer, "got caps %" GST_PTR_FORMAT, caps); |
| |
| if (gst_structure_get_int (caps_struct, "payload", &payload) && pt != -1 |
| && payload != pt) { |
| GST_ERROR_OBJECT (jitterbuffer, |
| "Got caps with wrong payload type (got %d, expected %d)", payload, pt); |
| return FALSE; |
| } |
| |
| if (payload != -1) { |
| GST_DEBUG_OBJECT (jitterbuffer, "Got payload type %d", payload); |
| priv->last_pt = payload; |
| } |
| |
| /* we need a clock-rate to convert the rtp timestamps to GStreamer time and to |
| * measure the amount of data in the buffer */ |
| if (!gst_structure_get_int (caps_struct, "clock-rate", &priv->clock_rate)) |
| goto error; |
| |
| if (priv->clock_rate <= 0) |
| goto wrong_rate; |
| |
| GST_DEBUG_OBJECT (jitterbuffer, "got clock-rate %d", priv->clock_rate); |
| |
| rtp_jitter_buffer_set_clock_rate (priv->jbuf, priv->clock_rate); |
| |
| gst_rtp_packet_rate_ctx_reset (&priv->packet_rate_ctx, priv->clock_rate); |
| |
| /* The clock base is the RTP timestamp corrsponding to the npt-start value. We |
| * can use this to track the amount of time elapsed on the sender. */ |
| if (gst_structure_get_uint (caps_struct, "clock-base", &val)) |
| priv->clock_base = val; |
| else |
| priv->clock_base = -1; |
| |
| priv->ext_timestamp = priv->clock_base; |
| |
| GST_DEBUG_OBJECT (jitterbuffer, "got clock-base %" G_GINT64_FORMAT, |
| priv->clock_base); |
| |
| if (gst_structure_get_uint (caps_struct, "seqnum-base", &val)) { |
| /* first expected seqnum, only update when we didn't have a previous base. */ |
| if (priv->next_in_seqnum == -1) |
| priv->next_in_seqnum = val; |
| if (priv->next_seqnum == -1) { |
| priv->next_seqnum = val; |
| JBUF_SIGNAL_EVENT (priv); |
| } |
| priv->seqnum_base = val; |
| } else { |
| priv->seqnum_base = -1; |
| } |
| |
| GST_DEBUG_OBJECT (jitterbuffer, "got seqnum-base %d", priv->next_in_seqnum); |
| |
| /* the start and stop times. The seqnum-base corresponds to the start time. We |
| * will keep track of the seqnums on the output and when we reach the one |
| * corresponding to npt-stop, we emit the npt-stop-reached signal */ |
| if (gst_structure_get_clock_time (caps_struct, "npt-start", &tval)) |
| priv->npt_start = tval; |
| else |
| priv->npt_start = 0; |
| |
| if (gst_structure_get_clock_time (caps_struct, "npt-stop", &tval)) |
| priv->npt_stop = tval; |
| else |
| priv->npt_stop = -1; |
| |
| GST_DEBUG_OBJECT (jitterbuffer, |
| "npt start/stop: %" GST_TIME_FORMAT "-%" GST_TIME_FORMAT, |
| GST_TIME_ARGS (priv->npt_start), GST_TIME_ARGS (priv->npt_stop)); |
| |
| if ((ts_refclk = gst_structure_get_string (caps_struct, "a-ts-refclk"))) { |
| GstClock *clock = NULL; |
| guint64 clock_offset = -1; |
| |
| GST_DEBUG_OBJECT (jitterbuffer, "Have timestamp reference clock %s", |
| ts_refclk); |
| |
| if (g_str_has_prefix (ts_refclk, "ntp=")) { |
| if (g_str_has_prefix (ts_refclk, "ntp=/traceable/")) { |
| GST_FIXME_OBJECT (jitterbuffer, "Can't handle traceable NTP clocks"); |
| } else { |
| const gchar *host, *portstr; |
| gchar *hostname; |
| guint port; |
| |
| host = ts_refclk + sizeof ("ntp=") - 1; |
| if (host[0] == '[') { |
| /* IPv6 */ |
| portstr = strchr (host, ']'); |
| if (portstr && portstr[1] == ':') |
| portstr = portstr + 1; |
| else |
| portstr = NULL; |
| } else { |
| portstr = strrchr (host, ':'); |
| } |
| |
| |
| if (!portstr || sscanf (portstr, ":%u", &port) != 1) |
| port = 123; |
| |
| if (portstr) |
| hostname = g_strndup (host, (portstr - host)); |
| else |
| hostname = g_strdup (host); |
| |
| clock = gst_ntp_clock_new (NULL, hostname, port, 0); |
| g_free (hostname); |
| } |
| } else if (g_str_has_prefix (ts_refclk, "ptp=IEEE1588-2008:")) { |
| const gchar *domainstr = |
| ts_refclk + sizeof ("ptp=IEEE1588-2008:XX-XX-XX-XX-XX-XX-XX-XX") - 1; |
| guint domain; |
| |
| if (domainstr[0] != ':' || sscanf (domainstr, ":%u", &domain) != 1) |
| domain = 0; |
| |
| clock = gst_ptp_clock_new (NULL, domain); |
| } else { |
| GST_FIXME_OBJECT (jitterbuffer, "Unsupported timestamp reference clock"); |
| } |
| |
| if ((mediaclk = gst_structure_get_string (caps_struct, "a-mediaclk"))) { |
| GST_DEBUG_OBJECT (jitterbuffer, "Got media clock %s", mediaclk); |
| |
| if (!g_str_has_prefix (mediaclk, "direct=") |
| || sscanf (mediaclk, "direct=%" G_GUINT64_FORMAT, &clock_offset) != 1) |
| GST_FIXME_OBJECT (jitterbuffer, "Unsupported media clock"); |
| if (strstr (mediaclk, "rate=") != NULL) { |
| GST_FIXME_OBJECT (jitterbuffer, "Rate property not supported"); |
| clock_offset = -1; |
| } |
| } |
| |
| rtp_jitter_buffer_set_media_clock (priv->jbuf, clock, clock_offset); |
| } else { |
| rtp_jitter_buffer_set_media_clock (priv->jbuf, NULL, -1); |
| } |
| |
| return TRUE; |
| |
| /* ERRORS */ |
| error: |
| { |
| GST_DEBUG_OBJECT (jitterbuffer, "No clock-rate in caps!"); |
| return FALSE; |
| } |
| wrong_rate: |
| { |
| GST_DEBUG_OBJECT (jitterbuffer, "Invalid clock-rate %d", priv->clock_rate); |
| return FALSE; |
| } |
| } |
| |
| static void |
| gst_rtp_jitter_buffer_flush_start (GstRtpJitterBuffer * jitterbuffer) |
| { |
| GstRtpJitterBufferPrivate *priv; |
| |
| priv = jitterbuffer->priv; |
| |
| JBUF_LOCK (priv); |
| /* mark ourselves as flushing */ |
| priv->srcresult = GST_FLOW_FLUSHING; |
| GST_DEBUG_OBJECT (jitterbuffer, "Disabling pop on queue"); |
| /* this unblocks any waiting pops on the src pad task */ |
| JBUF_SIGNAL_EVENT (priv); |
| JBUF_SIGNAL_QUERY (priv, FALSE); |
| JBUF_UNLOCK (priv); |
| } |
| |
| static void |
| gst_rtp_jitter_buffer_flush_stop (GstRtpJitterBuffer * jitterbuffer) |
| { |
| GstRtpJitterBufferPrivate *priv; |
| |
| priv = jitterbuffer->priv; |
| |
| JBUF_LOCK (priv); |
| GST_DEBUG_OBJECT (jitterbuffer, "Enabling pop on queue"); |
| /* Mark as non flushing */ |
| priv->srcresult = GST_FLOW_OK; |
| gst_segment_init (&priv->segment, GST_FORMAT_TIME); |
| priv->last_popped_seqnum = -1; |
| priv->last_out_time = -1; |
| priv->next_seqnum = -1; |
| priv->seqnum_base = -1; |
| priv->ips_rtptime = -1; |
| priv->ips_dts = GST_CLOCK_TIME_NONE; |
| priv->packet_spacing = 0; |
| priv->next_in_seqnum = -1; |
| priv->clock_rate = -1; |
| priv->last_pt = -1; |
| priv->eos = FALSE; |
| priv->estimated_eos = -1; |
| priv->last_elapsed = 0; |
| priv->ext_timestamp = -1; |
| priv->avg_jitter = 0; |
| priv->last_dts = -1; |
| priv->last_rtptime = -1; |
| priv->last_in_dts = 0; |
| priv->equidistant = 0; |
| GST_DEBUG_OBJECT (jitterbuffer, "flush and reset jitterbuffer"); |
| rtp_jitter_buffer_flush (priv->jbuf, (GFunc) free_item, NULL); |
| rtp_jitter_buffer_disable_buffering (priv->jbuf, FALSE); |
| rtp_jitter_buffer_reset_skew (priv->jbuf); |
| remove_all_timers (jitterbuffer); |
| g_queue_foreach (&priv->gap_packets, (GFunc) gst_buffer_unref, NULL); |
| g_queue_clear (&priv->gap_packets); |
| JBUF_UNLOCK (priv); |
| } |
| |
| static gboolean |
| gst_rtp_jitter_buffer_src_activate_mode (GstPad * pad, GstObject * parent, |
| GstPadMode mode, gboolean active) |
| { |
| gboolean result; |
| GstRtpJitterBuffer *jitterbuffer = NULL; |
| |
| jitterbuffer = GST_RTP_JITTER_BUFFER (parent); |
| |
| switch (mode) { |
| case GST_PAD_MODE_PUSH: |
| if (active) { |
| /* allow data processing */ |
| gst_rtp_jitter_buffer_flush_stop (jitterbuffer); |
| |
| /* start pushing out buffers */ |
| GST_DEBUG_OBJECT (jitterbuffer, "Starting task on srcpad"); |
| result = gst_pad_start_task (jitterbuffer->priv->srcpad, |
| (GstTaskFunction) gst_rtp_jitter_buffer_loop, jitterbuffer, NULL); |
| } else { |
| /* make sure all data processing stops ASAP */ |
| gst_rtp_jitter_buffer_flush_start (jitterbuffer); |
| |
| /* NOTE this will hardlock if the state change is called from the src pad |
| * task thread because we will _join() the thread. */ |
| GST_DEBUG_OBJECT (jitterbuffer, "Stopping task on srcpad"); |
| result = gst_pad_stop_task (pad); |
| } |
| break; |
| default: |
| result = FALSE; |
| break; |
| } |
| return result; |
| } |
| |
| static GstStateChangeReturn |
| gst_rtp_jitter_buffer_change_state (GstElement * element, |
| GstStateChange transition) |
| { |
| GstRtpJitterBuffer *jitterbuffer; |
| GstRtpJitterBufferPrivate *priv; |
| GstStateChangeReturn ret = GST_STATE_CHANGE_SUCCESS; |
| |
| jitterbuffer = GST_RTP_JITTER_BUFFER (element); |
| priv = jitterbuffer->priv; |
| |
| switch (transition) { |
| case GST_STATE_CHANGE_NULL_TO_READY: |
| break; |
| case GST_STATE_CHANGE_READY_TO_PAUSED: |
| JBUF_LOCK (priv); |
| /* reset negotiated values */ |
| priv->clock_rate = -1; |
| priv->clock_base = -1; |
| priv->peer_latency = 0; |
| priv->last_pt = -1; |
| /* block until we go to PLAYING */ |
| priv->blocked = TRUE; |
| priv->timer_running = TRUE; |
| priv->timer_thread = |
| g_thread_new ("timer", (GThreadFunc) wait_next_timeout, jitterbuffer); |
| JBUF_UNLOCK (priv); |
| break; |
| case GST_STATE_CHANGE_PAUSED_TO_PLAYING: |
| JBUF_LOCK (priv); |
| /* unblock to allow streaming in PLAYING */ |
| priv->blocked = FALSE; |
| JBUF_SIGNAL_EVENT (priv); |
| JBUF_SIGNAL_TIMER (priv); |
| JBUF_UNLOCK (priv); |
| break; |
| default: |
| break; |
| } |
| |
| ret = GST_ELEMENT_CLASS (parent_class)->change_state (element, transition); |
| |
| switch (transition) { |
| case GST_STATE_CHANGE_READY_TO_PAUSED: |
| /* we are a live element because we sync to the clock, which we can only |
| * do in the PLAYING state */ |
| if (ret != GST_STATE_CHANGE_FAILURE) |
| ret = GST_STATE_CHANGE_NO_PREROLL; |
| break; |
| case GST_STATE_CHANGE_PLAYING_TO_PAUSED: |
| JBUF_LOCK (priv); |
| /* block to stop streaming when PAUSED */ |
| priv->blocked = TRUE; |
| unschedule_current_timer (jitterbuffer); |
| JBUF_UNLOCK (priv); |
| if (ret != GST_STATE_CHANGE_FAILURE) |
| ret = GST_STATE_CHANGE_NO_PREROLL; |
| break; |
| case GST_STATE_CHANGE_PAUSED_TO_READY: |
| JBUF_LOCK (priv); |
| gst_buffer_replace (&priv->last_sr, NULL); |
| priv->timer_running = FALSE; |
| unschedule_current_timer (jitterbuffer); |
| JBUF_SIGNAL_TIMER (priv); |
| JBUF_SIGNAL_QUERY (priv, FALSE); |
| JBUF_UNLOCK (priv); |
| g_thread_join (priv->timer_thread); |
| priv->timer_thread = NULL; |
| break; |
| case GST_STATE_CHANGE_READY_TO_NULL: |
| break; |
| default: |
| break; |
| } |
| |
| return ret; |
| } |
| |
| static gboolean |
| gst_rtp_jitter_buffer_src_event (GstPad * pad, GstObject * parent, |
| GstEvent * event) |
| { |
| gboolean ret = TRUE; |
| GstRtpJitterBuffer *jitterbuffer; |
| GstRtpJitterBufferPrivate *priv; |
| |
| jitterbuffer = GST_RTP_JITTER_BUFFER_CAST (parent); |
| priv = jitterbuffer->priv; |
| |
| GST_DEBUG_OBJECT (jitterbuffer, "received %s", GST_EVENT_TYPE_NAME (event)); |
| |
| switch (GST_EVENT_TYPE (event)) { |
| case GST_EVENT_LATENCY: |
| { |
| GstClockTime latency; |
| |
| gst_event_parse_latency (event, &latency); |
| |
| GST_DEBUG_OBJECT (jitterbuffer, |
| "configuring latency of %" GST_TIME_FORMAT, GST_TIME_ARGS (latency)); |
| |
| JBUF_LOCK (priv); |
| /* adjust the overall buffer delay to the total pipeline latency in |
| * buffering mode because if downstream consumes too fast (because of |
| * large latency or queues, we would start rebuffering again. */ |
| if (rtp_jitter_buffer_get_mode (priv->jbuf) == |
| RTP_JITTER_BUFFER_MODE_BUFFER) { |
| rtp_jitter_buffer_set_delay (priv->jbuf, latency); |
| } |
| JBUF_UNLOCK (priv); |
| |
| ret = gst_pad_push_event (priv->sinkpad, event); |
| break; |
| } |
| default: |
| ret = gst_pad_push_event (priv->sinkpad, event); |
| break; |
| } |
| |
| return ret; |
| } |
| |
| /* handles and stores the event in the jitterbuffer, must be called with |
| * LOCK */ |
| static gboolean |
| queue_event (GstRtpJitterBuffer * jitterbuffer, GstEvent * event) |
| { |
| GstRtpJitterBufferPrivate *priv = jitterbuffer->priv; |
| RTPJitterBufferItem *item; |
| gboolean head; |
| |
| switch (GST_EVENT_TYPE (event)) { |
| case GST_EVENT_CAPS: |
| { |
| GstCaps *caps; |
| |
| gst_event_parse_caps (event, &caps); |
| gst_jitter_buffer_sink_parse_caps (jitterbuffer, caps, -1); |
| break; |
| } |
| case GST_EVENT_SEGMENT: |
| { |
| GstSegment segment; |
| gst_event_copy_segment (event, &segment); |
| |
| /* we need time for now */ |
| if (segment.format != GST_FORMAT_TIME) { |
| GST_DEBUG_OBJECT (jitterbuffer, "ignoring non-TIME newsegment"); |
| gst_event_unref (event); |
| |
| gst_segment_init (&segment, GST_FORMAT_TIME); |
| event = gst_event_new_segment (&segment); |
| } |
| |
| priv->segment = segment; |
| break; |
| } |
| case GST_EVENT_EOS: |
| priv->eos = TRUE; |
| rtp_jitter_buffer_disable_buffering (priv->jbuf, TRUE); |
| break; |
| default: |
| break; |
| } |
| |
| |
| GST_DEBUG_OBJECT (jitterbuffer, "adding event"); |
| item = alloc_item (event, ITEM_TYPE_EVENT, -1, -1, -1, 0, -1); |
| rtp_jitter_buffer_insert (priv->jbuf, item, &head, NULL, -1); |
| if (head) |
| JBUF_SIGNAL_EVENT (priv); |
| |
| return TRUE; |
| } |
| |
| static gboolean |
| gst_rtp_jitter_buffer_sink_event (GstPad * pad, GstObject * parent, |
| GstEvent * event) |
| { |
| gboolean ret = TRUE; |
| GstRtpJitterBuffer *jitterbuffer; |
| GstRtpJitterBufferPrivate *priv; |
| |
| jitterbuffer = GST_RTP_JITTER_BUFFER (parent); |
| priv = jitterbuffer->priv; |
| |
| GST_DEBUG_OBJECT (jitterbuffer, "received %s", GST_EVENT_TYPE_NAME (event)); |
| |
| switch (GST_EVENT_TYPE (event)) { |
| case GST_EVENT_FLUSH_START: |
| ret = gst_pad_push_event (priv->srcpad, event); |
| gst_rtp_jitter_buffer_flush_start (jitterbuffer); |
| /* wait for the loop to go into PAUSED */ |
| gst_pad_pause_task (priv->srcpad); |
| break; |
| case GST_EVENT_FLUSH_STOP: |
| ret = gst_pad_push_event (priv->srcpad, event); |
| ret = |
| gst_rtp_jitter_buffer_src_activate_mode (priv->srcpad, parent, |
| GST_PAD_MODE_PUSH, TRUE); |
| break; |
| default: |
| if (GST_EVENT_IS_SERIALIZED (event)) { |
| /* serialized events go in the queue */ |
| JBUF_LOCK (priv); |
| if (priv->srcresult != GST_FLOW_OK) { |
| /* Errors in sticky event pushing are no problem and ignored here |
| * as they will cause more meaningful errors during data flow. |
| * For EOS events, that are not followed by data flow, we still |
| * return FALSE here though. |
| */ |
| if (!GST_EVENT_IS_STICKY (event) || |
| GST_EVENT_TYPE (event) == GST_EVENT_EOS) |
| goto out_flow_error; |
| } |
| /* refuse more events on EOS */ |
| if (priv->eos) |
| goto out_eos; |
| ret = queue_event (jitterbuffer, event); |
| JBUF_UNLOCK (priv); |
| } else { |
| /* non-serialized events are forwarded downstream immediately */ |
| ret = gst_pad_push_event (priv->srcpad, event); |
| } |
| break; |
| } |
| return ret; |
| |
| /* ERRORS */ |
| out_flow_error: |
| { |
| GST_DEBUG_OBJECT (jitterbuffer, |
| "refusing event, we have a downstream flow error: %s", |
| gst_flow_get_name (priv->srcresult)); |
| JBUF_UNLOCK (priv); |
| gst_event_unref (event); |
| return FALSE; |
| } |
| out_eos: |
| { |
| GST_DEBUG_OBJECT (jitterbuffer, "refusing event, we are EOS"); |
| JBUF_UNLOCK (priv); |
| gst_event_unref (event); |
| return FALSE; |
| } |
| } |
| |
| static gboolean |
| gst_rtp_jitter_buffer_sink_rtcp_event (GstPad * pad, GstObject * parent, |
| GstEvent * event) |
| { |
| gboolean ret = TRUE; |
| GstRtpJitterBuffer *jitterbuffer; |
| |
| jitterbuffer = GST_RTP_JITTER_BUFFER (parent); |
| |
| GST_DEBUG_OBJECT (jitterbuffer, "received %s", GST_EVENT_TYPE_NAME (event)); |
| |
| switch (GST_EVENT_TYPE (event)) { |
| case GST_EVENT_FLUSH_START: |
| gst_event_unref (event); |
| break; |
| case GST_EVENT_FLUSH_STOP: |
| gst_event_unref (event); |
| break; |
| default: |
| ret = gst_pad_event_default (pad, parent, event); |
| break; |
| } |
| |
| return ret; |
| } |
| |
| /* |
| * Must be called with JBUF_LOCK held, will release the LOCK when emiting the |
| * signal. The function returns GST_FLOW_ERROR when a parsing error happened and |
| * GST_FLOW_FLUSHING when the element is shutting down. On success |
| * GST_FLOW_OK is returned. |
| */ |
| static GstFlowReturn |
| gst_rtp_jitter_buffer_get_clock_rate (GstRtpJitterBuffer * jitterbuffer, |
| guint8 pt) |
| { |
| GValue ret = { 0 }; |
| GValue args[2] = { {0}, {0} }; |
| GstCaps *caps; |
| gboolean res; |
| |
| g_value_init (&args[0], GST_TYPE_ELEMENT); |
| g_value_set_object (&args[0], jitterbuffer); |
| g_value_init (&args[1], G_TYPE_UINT); |
| g_value_set_uint (&args[1], pt); |
| |
| g_value_init (&ret, GST_TYPE_CAPS); |
| g_value_set_boxed (&ret, NULL); |
| |
| JBUF_UNLOCK (jitterbuffer->priv); |
| g_signal_emitv (args, gst_rtp_jitter_buffer_signals[SIGNAL_REQUEST_PT_MAP], 0, |
| &ret); |
| JBUF_LOCK_CHECK (jitterbuffer->priv, out_flushing); |
| |
| g_value_unset (&args[0]); |
| g_value_unset (&args[1]); |
| caps = (GstCaps *) g_value_dup_boxed (&ret); |
| g_value_unset (&ret); |
| if (!caps) |
| goto no_caps; |
| |
| res = gst_jitter_buffer_sink_parse_caps (jitterbuffer, caps, pt); |
| gst_caps_unref (caps); |
| |
| if (G_UNLIKELY (!res)) |
| goto parse_failed; |
| |
| return GST_FLOW_OK; |
| |
| /* ERRORS */ |
| no_caps: |
| { |
| GST_DEBUG_OBJECT (jitterbuffer, "could not get caps"); |
| return GST_FLOW_ERROR; |
| } |
| out_flushing: |
| { |
| GST_DEBUG_OBJECT (jitterbuffer, "we are flushing"); |
| return GST_FLOW_FLUSHING; |
| } |
| parse_failed: |
| { |
| GST_DEBUG_OBJECT (jitterbuffer, "parse failed"); |
| return GST_FLOW_ERROR; |
| } |
| } |
| |
| /* call with jbuf lock held */ |
| static GstMessage * |
| check_buffering_percent (GstRtpJitterBuffer * jitterbuffer, gint percent) |
| { |
| GstRtpJitterBufferPrivate *priv = jitterbuffer->priv; |
| GstMessage *message = NULL; |
| |
| if (percent == -1) |
| return NULL; |
| |
| /* Post a buffering message */ |
| if (priv->last_percent != percent) { |
| priv->last_percent = percent; |
| message = |
| gst_message_new_buffering (GST_OBJECT_CAST (jitterbuffer), percent); |
| gst_message_set_buffering_stats (message, GST_BUFFERING_LIVE, -1, -1, -1); |
| } |
| |
| return message; |
| } |
| |
| static GstClockTime |
| apply_offset (GstRtpJitterBuffer * jitterbuffer, GstClockTime timestamp) |
| { |
| GstRtpJitterBufferPrivate *priv; |
| |
| priv = jitterbuffer->priv; |
| |
| if (timestamp == -1) |
| return -1; |
| |
| /* apply the timestamp offset, this is used for inter stream sync */ |
| timestamp += priv->ts_offset; |
| /* add the offset, this is used when buffering */ |
| timestamp += priv->out_offset; |
| |
| return timestamp; |
| } |
| |
| static TimerQueue * |
| timer_queue_new (void) |
| { |
| TimerQueue *queue; |
| |
| queue = g_slice_new (TimerQueue); |
| queue->timers = g_queue_new (); |
| queue->hashtable = g_hash_table_new (NULL, NULL); |
| |
| return queue; |
| } |
| |
| static void |
| timer_queue_free (TimerQueue * queue) |
| { |
| if (!queue) |
| return; |
| |
| g_hash_table_destroy (queue->hashtable); |
| g_queue_free_full (queue->timers, g_free); |
| g_slice_free (TimerQueue, queue); |
| } |
| |
| static void |
| timer_queue_append (TimerQueue * queue, const TimerData * timer, |
| GstClockTime timeout, gboolean lost) |
| { |
| TimerData *copy; |
| |
| copy = g_memdup (timer, sizeof (*timer)); |
| copy->timeout = timeout; |
| copy->type = lost ? TIMER_TYPE_LOST : TIMER_TYPE_EXPECTED; |
| copy->idx = -1; |
| |
| GST_LOG ("Append rtx-stats timer #%d, %" GST_TIME_FORMAT, |
| copy->seqnum, GST_TIME_ARGS (copy->timeout)); |
| g_queue_push_tail (queue->timers, copy); |
| g_hash_table_insert (queue->hashtable, GINT_TO_POINTER (copy->seqnum), copy); |
| } |
| |
| static void |
| timer_queue_clear_until (TimerQueue * queue, GstClockTime timeout) |
| { |
| TimerData *test; |
| |
| test = g_queue_peek_head (queue->timers); |
| while (test && test->timeout < timeout) { |
| GST_LOG ("Pop rtx-stats timer #%d, %" GST_TIME_FORMAT " < %" |
| GST_TIME_FORMAT, test->seqnum, GST_TIME_ARGS (test->timeout), |
| GST_TIME_ARGS (timeout)); |
| g_hash_table_remove (queue->hashtable, GINT_TO_POINTER (test->seqnum)); |
| g_free (g_queue_pop_head (queue->timers)); |
| test = g_queue_peek_head (queue->timers); |
| } |
| } |
| |
| static TimerData * |
| timer_queue_find (TimerQueue * queue, guint16 seqnum) |
| { |
| return g_hash_table_lookup (queue->hashtable, GINT_TO_POINTER (seqnum)); |
| } |
| |
| static TimerData * |
| find_timer (GstRtpJitterBuffer * jitterbuffer, guint16 seqnum) |
| { |
| GstRtpJitterBufferPrivate *priv = jitterbuffer->priv; |
| TimerData *timer = NULL; |
| gint i, len; |
| |
| len = priv->timers->len; |
| for (i = 0; i < len; i++) { |
| TimerData *test = &g_array_index (priv->timers, TimerData, i); |
| if (test->seqnum == seqnum) { |
| timer = test; |
| break; |
| } |
| } |
| return timer; |
| } |
| |
| static void |
| unschedule_current_timer (GstRtpJitterBuffer * jitterbuffer) |
| { |
| GstRtpJitterBufferPrivate *priv = jitterbuffer->priv; |
| |
| if (priv->clock_id) { |
| GST_DEBUG_OBJECT (jitterbuffer, "unschedule current timer"); |
| gst_clock_id_unschedule (priv->clock_id); |
| priv->clock_id = NULL; |
| } |
| } |
| |
| static GstClockTime |
| get_timeout (GstRtpJitterBuffer * jitterbuffer, TimerData * timer) |
| { |
| GstRtpJitterBufferPrivate *priv = jitterbuffer->priv; |
| GstClockTime test_timeout; |
| |
| if ((test_timeout = timer->timeout) == -1) |
| return -1; |
| |
| if (timer->type != TIMER_TYPE_EXPECTED) { |
| /* add our latency and offset to get output times. */ |
| test_timeout = apply_offset (jitterbuffer, test_timeout); |
| test_timeout += priv->latency_ns; |
| } |
| return test_timeout; |
| } |
| |
| static void |
| recalculate_timer (GstRtpJitterBuffer * jitterbuffer, TimerData * timer) |
| { |
| GstRtpJitterBufferPrivate *priv = jitterbuffer->priv; |
| |
| if (priv->clock_id) { |
| GstClockTime timeout = get_timeout (jitterbuffer, timer); |
| |
| GST_DEBUG ("%" GST_TIME_FORMAT " <> %" GST_TIME_FORMAT, |
| GST_TIME_ARGS (timeout), GST_TIME_ARGS (priv->timer_timeout)); |
| |
| if (timeout == -1 || timeout < priv->timer_timeout) |
| unschedule_current_timer (jitterbuffer); |
| } |
| } |
| |
| static TimerData * |
| add_timer (GstRtpJitterBuffer * jitterbuffer, TimerType type, |
| guint16 seqnum, guint num, GstClockTime timeout, GstClockTime delay, |
| GstClockTime duration) |
| { |
| GstRtpJitterBufferPrivate *priv = jitterbuffer->priv; |
| TimerData *timer; |
| gint len; |
| |
| GST_DEBUG_OBJECT (jitterbuffer, |
| "add timer %d for seqnum %d to %" GST_TIME_FORMAT ", delay %" |
| GST_TIME_FORMAT, type, seqnum, GST_TIME_ARGS (timeout), |
| GST_TIME_ARGS (delay)); |
| |
| len = priv->timers->len; |
| g_array_set_size (priv->timers, len + 1); |
| timer = &g_array_index (priv->timers, TimerData, len); |
| timer->idx = len; |
| timer->type = type; |
| timer->seqnum = seqnum; |
| timer->num = num; |
| timer->timeout = timeout + delay; |
| timer->duration = duration; |
| if (type == TIMER_TYPE_EXPECTED) { |
| timer->rtx_base = timeout; |
| timer->rtx_delay = delay; |
| timer->rtx_retry = 0; |
| } |
| timer->rtx_last = GST_CLOCK_TIME_NONE; |
| timer->num_rtx_retry = 0; |
| timer->num_rtx_received = 0; |
| recalculate_timer (jitterbuffer, timer); |
| JBUF_SIGNAL_TIMER (priv); |
| |
| return timer; |
| } |
| |
| static void |
| reschedule_timer (GstRtpJitterBuffer * jitterbuffer, TimerData * timer, |
| guint16 seqnum, GstClockTime timeout, GstClockTime delay, gboolean reset) |
| { |
| GstRtpJitterBufferPrivate *priv = jitterbuffer->priv; |
| gboolean seqchange, timechange; |
| guint16 oldseq; |
| |
| seqchange = timer->seqnum != seqnum; |
| timechange = timer->timeout != timeout; |
| |
| if (!seqchange && !timechange) |
| return; |
| |
| oldseq = timer->seqnum; |
| |
| GST_DEBUG_OBJECT (jitterbuffer, |
| "replace timer %d for seqnum %d->%d timeout %" GST_TIME_FORMAT |
| "->%" GST_TIME_FORMAT, timer->type, oldseq, seqnum, |
| GST_TIME_ARGS (timer->timeout), GST_TIME_ARGS (timeout + delay)); |
| |
| timer->timeout = timeout + delay; |
| timer->seqnum = seqnum; |
| if (reset) { |
| GST_DEBUG_OBJECT (jitterbuffer, "reset rtx delay %" GST_TIME_FORMAT |
| "->%" GST_TIME_FORMAT, GST_TIME_ARGS (timer->rtx_delay), |
| GST_TIME_ARGS (delay)); |
| timer->rtx_base = timeout; |
| timer->rtx_delay = delay; |
| timer->rtx_retry = 0; |
| } |
| if (seqchange) { |
| timer->num_rtx_retry = 0; |
| timer->num_rtx_received = 0; |
| } |
| |
| if (priv->clock_id) { |
| /* we changed the seqnum and there is a timer currently waiting with this |
| * seqnum, unschedule it */ |
| if (seqchange && priv->timer_seqnum == oldseq) |
| unschedule_current_timer (jitterbuffer); |
| /* we changed the time, check if it is earlier than what we are waiting |
| * for and unschedule if so */ |
| else if (timechange) |
| recalculate_timer (jitterbuffer, timer); |
| } |
| } |
| |
| static TimerData * |
| set_timer (GstRtpJitterBuffer * jitterbuffer, TimerType type, |
| guint16 seqnum, GstClockTime timeout) |
| { |
| TimerData *timer; |
| |
| /* find the seqnum timer */ |
| timer = find_timer (jitterbuffer, seqnum); |
| if (timer == NULL) { |
| timer = add_timer (jitterbuffer, type, seqnum, 0, timeout, 0, -1); |
| } else { |
| reschedule_timer (jitterbuffer, timer, seqnum, timeout, 0, FALSE); |
| } |
| return timer; |
| } |
| |
| static void |
| remove_timer (GstRtpJitterBuffer * jitterbuffer, TimerData * timer) |
| { |
| GstRtpJitterBufferPrivate *priv = jitterbuffer->priv; |
| guint idx; |
| |
| if (timer->idx == -1) |
| return; |
| |
| if (priv->clock_id && priv->timer_seqnum == timer->seqnum) |
| unschedule_current_timer (jitterbuffer); |
| |
| idx = timer->idx; |
| GST_DEBUG_OBJECT (jitterbuffer, "removed index %d", idx); |
| g_array_remove_index_fast (priv->timers, idx); |
| timer->idx = idx; |
| } |
| |
| static void |
| remove_all_timers (GstRtpJitterBuffer * jitterbuffer) |
| { |
| GstRtpJitterBufferPrivate *priv = jitterbuffer->priv; |
| GST_DEBUG_OBJECT (jitterbuffer, "removed all timers"); |
| g_array_set_size (priv->timers, 0); |
| unschedule_current_timer (jitterbuffer); |
| } |
| |
| /* get the extra delay to wait before sending RTX */ |
| static GstClockTime |
| get_rtx_delay (GstRtpJitterBufferPrivate * priv) |
| { |
| GstClockTime delay; |
| |
| if (priv->rtx_delay == -1) { |
| if (priv->avg_jitter == 0 && priv->packet_spacing == 0) { |
| delay = DEFAULT_AUTO_RTX_DELAY; |
| } else { |
| /* jitter is in nanoseconds, maximum of 2x jitter and half the |
| * packet spacing is a good margin */ |
| delay = MAX (priv->avg_jitter * 2, priv->packet_spacing / 2); |
| } |
| } else { |
| delay = priv->rtx_delay * GST_MSECOND; |
| } |
| if (priv->rtx_min_delay > 0) |
| delay = MAX (delay, priv->rtx_min_delay * GST_MSECOND); |
| |
| return delay; |
| } |
| |
| /* Check if packet with seqnum is already considered definitely lost by being |
| * part of a "lost timer" for multiple packets */ |
| static gboolean |
| already_lost (GstRtpJitterBuffer * jitterbuffer, guint16 seqnum) |
| { |
| GstRtpJitterBufferPrivate *priv = jitterbuffer->priv; |
| gint i, len; |
| |
| len = priv->timers->len; |
| for (i = 0; i < len; i++) { |
| TimerData *test = &g_array_index (priv->timers, TimerData, i); |
| gint gap = gst_rtp_buffer_compare_seqnum (test->seqnum, seqnum); |
| |
| if (test->num > 1 && test->type == TIMER_TYPE_LOST && gap >= 0 && |
| gap < test->num) { |
| GST_DEBUG ("seqnum #%d already considered definitely lost (#%d->#%d)", |
| seqnum, test->seqnum, (test->seqnum + test->num - 1) & 0xffff); |
| return TRUE; |
| } |
| } |
| |
| return FALSE; |
| } |
| |
| /* we just received a packet with seqnum and dts. |
| * |
| * First check for old seqnum that we are still expecting. If the gap with the |
| * current seqnum is too big, unschedule the timeouts. |
| * |
| * If we have a valid packet spacing estimate we can set a timer for when we |
| * should receive the next packet. |
| * If we don't have a valid estimate, we remove any timer we might have |
| * had for this packet. |
| */ |
| static void |
| update_timers (GstRtpJitterBuffer * jitterbuffer, guint16 seqnum, |
| GstClockTime dts, gboolean do_next_seqnum, gboolean is_rtx, |
| TimerData * timer) |
| { |
| GstRtpJitterBufferPrivate *priv = jitterbuffer->priv; |
| |
| /* go through all timers and unschedule the ones with a large gap */ |
| if (priv->do_retransmission && priv->rtx_delay_reorder > 0) { |
| gint i, len; |
| len = priv->timers->len; |
| for (i = 0; i < len; i++) { |
| TimerData *test = &g_array_index (priv->timers, TimerData, i); |
| gint gap; |
| |
| gap = gst_rtp_buffer_compare_seqnum (test->seqnum, seqnum); |
| |
| GST_DEBUG_OBJECT (jitterbuffer, "%d, #%d<->#%d gap %d", |
| test->type, test->seqnum, seqnum, gap); |
| |
| if (gap > priv->rtx_delay_reorder) { |
| /* max gap, we exceeded the max reorder distance and we don't expect the |
| * missing packet to be this reordered */ |
| if (test->num_rtx_retry == 0 && test->type == TIMER_TYPE_EXPECTED) |
| reschedule_timer (jitterbuffer, test, test->seqnum, -1, 0, FALSE); |
| } |
| } |
| } |
| |
| do_next_seqnum = do_next_seqnum && priv->packet_spacing > 0 |
| && priv->do_retransmission && priv->rtx_next_seqnum; |
| |
| if (timer && timer->type != TIMER_TYPE_DEADLINE) { |
| if (timer->num_rtx_retry > 0) { |
| if (is_rtx) { |
| update_rtx_stats (jitterbuffer, timer, dts, TRUE); |
| /* don't try to estimate the next seqnum because this is a retransmitted |
| * packet and it probably did not arrive with the expected packet |
| * spacing. */ |
| do_next_seqnum = FALSE; |
| } |
| |
| if (!is_rtx || timer->num_rtx_retry > 1) { |
| /* Store timer in order to record stats when/if the retransmitted |
| * packet arrives. We should also store timer information if we've |
| * requested retransmission more than once since we may receive |
| * several retransmitted packets. For accuracy we should update the |
| * stats also when the redundant retransmitted packets arrives. */ |
| timer_queue_append (priv->rtx_stats_timers, timer, |
| dts + priv->rtx_stats_timeout * GST_MSECOND, FALSE); |
| } |
| } |
| } |
| |
| if (do_next_seqnum && dts != GST_CLOCK_TIME_NONE) { |
| GstClockTime expected, delay; |
| |
| /* calculate expected arrival time of the next seqnum */ |
| expected = dts + priv->packet_spacing; |
| |
| delay = get_rtx_delay (priv); |
| |
| /* and update/install timer for next seqnum */ |
| GST_DEBUG_OBJECT (jitterbuffer, "Add RTX timer #%d, expected %" |
| GST_TIME_FORMAT ", delay %" GST_TIME_FORMAT ", packet-spacing %" |
| GST_TIME_FORMAT ", jitter %" GST_TIME_FORMAT, priv->next_in_seqnum, |
| GST_TIME_ARGS (expected), GST_TIME_ARGS (delay), |
| GST_TIME_ARGS (priv->packet_spacing), GST_TIME_ARGS (priv->avg_jitter)); |
| |
| if (timer) { |
| reschedule_timer (jitterbuffer, timer, priv->next_in_seqnum, expected, |
| delay, TRUE); |
| } else { |
| add_timer (jitterbuffer, TIMER_TYPE_EXPECTED, priv->next_in_seqnum, 0, |
| expected, delay, priv->packet_spacing); |
| } |
| } else if (timer && timer->type != TIMER_TYPE_DEADLINE) { |
| /* if we had a timer, remove it, we don't know when to expect the next |
| * packet. */ |
| remove_timer (jitterbuffer, timer); |
| } |
| } |
| |
| static void |
| calculate_packet_spacing (GstRtpJitterBuffer * jitterbuffer, guint32 rtptime, |
| GstClockTime dts) |
| { |
| GstRtpJitterBufferPrivate *priv = jitterbuffer->priv; |
| |
| /* we need consecutive seqnums with a different |
| * rtptime to estimate the packet spacing. */ |
| if (priv->ips_rtptime != rtptime) { |
| /* rtptime changed, check dts diff */ |
| if (priv->ips_dts != -1 && dts != -1 && dts > priv->ips_dts) { |
| GstClockTime new_packet_spacing = dts - priv->ips_dts; |
| GstClockTime old_packet_spacing = priv->packet_spacing; |
| |
| /* Biased towards bigger packet spacings to prevent |
| * too many unneeded retransmission requests for next |
| * packets that just arrive a little later than we would |
| * expect */ |
| if (old_packet_spacing > new_packet_spacing) |
| priv->packet_spacing = |
| (new_packet_spacing + 3 * old_packet_spacing) / 4; |
| else if (old_packet_spacing > 0) |
| priv->packet_spacing = |
| (3 * new_packet_spacing + old_packet_spacing) / 4; |
| else |
| priv->packet_spacing = new_packet_spacing; |
| |
| GST_DEBUG_OBJECT (jitterbuffer, |
| "new packet spacing %" GST_TIME_FORMAT |
| " old packet spacing %" GST_TIME_FORMAT |
| " combined to %" GST_TIME_FORMAT, |
| GST_TIME_ARGS (new_packet_spacing), |
| GST_TIME_ARGS (old_packet_spacing), |
| GST_TIME_ARGS (priv->packet_spacing)); |
| } |
| priv->ips_rtptime = rtptime; |
| priv->ips_dts = dts; |
| } |
| } |
| |
| static void |
| calculate_expected (GstRtpJitterBuffer * jitterbuffer, guint32 expected, |
| guint16 seqnum, GstClockTime dts, gint gap) |
| { |
| GstRtpJitterBufferPrivate *priv = jitterbuffer->priv; |
| GstClockTime duration, expected_dts, delay; |
| TimerType type; |
| gboolean equidistant = priv->equidistant > 0; |
| |
| GST_DEBUG_OBJECT (jitterbuffer, |
| "dts %" GST_TIME_FORMAT ", last %" GST_TIME_FORMAT, |
| GST_TIME_ARGS (dts), GST_TIME_ARGS (priv->last_in_dts)); |
| |
| if (dts == GST_CLOCK_TIME_NONE) { |
| GST_WARNING_OBJECT (jitterbuffer, "Have no DTS"); |
| return; |
| } |
| |
| if (equidistant) { |
| GstClockTime total_duration; |
| /* the total duration spanned by the missing packets */ |
| if (dts >= priv->last_in_dts) |
| total_duration = dts - priv->last_in_dts; |
| else |
| total_duration = 0; |
| |
| /* interpolate between the current time and the last time based on |
| * number of packets we are missing, this is the estimated duration |
| * for the missing packet based on equidistant packet spacing. */ |
| duration = total_duration / (gap + 1); |
| |
| GST_DEBUG_OBJECT (jitterbuffer, "duration %" GST_TIME_FORMAT, |
| GST_TIME_ARGS (duration)); |
| |
| if (total_duration > priv->latency_ns) { |
| GstClockTime gap_time; |
| guint lost_packets; |
| |
| if (duration > 0) { |
| GstClockTime gap_dur = gap * duration; |
| if (gap_dur > priv->latency_ns) |
| gap_time = gap_dur - priv->latency_ns; |
| else |
| gap_time = 0; |
| lost_packets = gap_time / duration; |
| } else { |
| gap_time = total_duration - priv->latency_ns; |
| lost_packets = gap; |
| } |
| |
| /* too many lost packets, some of the missing packets are already |
| * too late and we can generate lost packet events for them. */ |
| GST_INFO_OBJECT (jitterbuffer, |
| "lost packets (%d, #%d->#%d) duration too large %" GST_TIME_FORMAT |
| " > %" GST_TIME_FORMAT ", consider %u lost (%" GST_TIME_FORMAT ")", |
| gap, expected, seqnum - 1, GST_TIME_ARGS (total_duration), |
| GST_TIME_ARGS (priv->latency_ns), lost_packets, |
| GST_TIME_ARGS (gap_time)); |
| |
| /* this timer will fire immediately and the lost event will be pushed from |
| * the timer thread */ |
| if (lost_packets > 0) { |
| add_timer (jitterbuffer, TIMER_TYPE_LOST, expected, lost_packets, |
| priv->last_in_dts + duration, 0, gap_time); |
| expected += lost_packets; |
| priv->last_in_dts += gap_time; |
| } |
| } |
| |
| expected_dts = priv->last_in_dts + duration; |
| } else { |
| /* If we cannot assume equidistant packet spacing, the only thing we now |
| * for sure is that the missing packets have expected dts not later than |
| * the last received dts. */ |
| duration = 0; |
| expected_dts = dts; |
| } |
| |
| delay = 0; |
| |
| if (priv->do_retransmission) { |
| TimerData *timer = find_timer (jitterbuffer, expected); |
| |
| type = TIMER_TYPE_EXPECTED; |
| delay = get_rtx_delay (priv); |
| |
| /* if we had a timer for the first missing packet, update it. */ |
| if (timer && timer->type == TIMER_TYPE_EXPECTED) { |
| GstClockTime timeout = timer->timeout; |
| |
| timer->duration = duration; |
| if (timeout > (expected_dts + delay) && timer->num_rtx_retry == 0) { |
| reschedule_timer (jitterbuffer, timer, timer->seqnum, expected_dts, |
| delay, TRUE); |
| } |
| expected++; |
| expected_dts += duration; |
| } |
| } else { |
| type = TIMER_TYPE_LOST; |
| } |
| |
| while (gst_rtp_buffer_compare_seqnum (expected, seqnum) > 0) { |
| add_timer (jitterbuffer, type, expected, 0, expected_dts, delay, duration); |
| expected_dts += duration; |
| expected++; |
| } |
| } |
| |
| static void |
| calculate_jitter (GstRtpJitterBuffer * jitterbuffer, GstClockTime dts, |
| guint32 rtptime) |
| { |
| gint32 rtpdiff; |
| GstClockTimeDiff dtsdiff, rtpdiffns, diff; |
| GstRtpJitterBufferPrivate *priv; |
| |
| priv = jitterbuffer->priv; |
| |
| if (G_UNLIKELY (dts == GST_CLOCK_TIME_NONE) || priv->clock_rate <= 0) |
| goto no_time; |
| |
| if (priv->last_dts != -1) |
| dtsdiff = dts - priv->last_dts; |
| else |
| dtsdiff = 0; |
| |
| if (priv->last_rtptime != -1) |
| rtpdiff = rtptime - (guint32) priv->last_rtptime; |
| else |
| rtpdiff = 0; |
| |
| /* Guess whether stream currently uses equidistant packet spacing. If we |
| * often see identical timestamps it means the packets are not |
| * equidistant. */ |
| if (rtptime == priv->last_rtptime) |
| priv->equidistant -= 2; |
| else |
| priv->equidistant += 1; |
| priv->equidistant = CLAMP (priv->equidistant, -7, 7); |
| |
| priv->last_dts = dts; |
| priv->last_rtptime = rtptime; |
| |
| if (rtpdiff > 0) |
| rtpdiffns = |
| gst_util_uint64_scale_int (rtpdiff, GST_SECOND, priv->clock_rate); |
| else |
| rtpdiffns = |
| -gst_util_uint64_scale_int (-rtpdiff, GST_SECOND, priv->clock_rate); |
| |
| diff = ABS (dtsdiff - rtpdiffns); |
| |
| /* jitter is stored in nanoseconds */ |
| priv->avg_jitter = (diff + (15 * priv->avg_jitter)) >> 4; |
| |
| GST_LOG_OBJECT (jitterbuffer, |
| "dtsdiff %" GST_TIME_FORMAT " rtptime %" GST_TIME_FORMAT |
| ", clock-rate %d, diff %" GST_TIME_FORMAT ", jitter: %" GST_TIME_FORMAT, |
| GST_TIME_ARGS (dtsdiff), GST_TIME_ARGS (rtpdiffns), priv->clock_rate, |
| GST_TIME_ARGS (diff), GST_TIME_ARGS (priv->avg_jitter)); |
| |
| return; |
| |
| /* ERRORS */ |
| no_time: |
| { |
| GST_DEBUG_OBJECT (jitterbuffer, |
| "no dts or no clock-rate, can't calculate jitter"); |
| return; |
| } |
| } |
| |
| static gint |
| compare_buffer_seqnum (GstBuffer * a, GstBuffer * b, gpointer user_data) |
| { |
| GstRTPBuffer rtp_a = GST_RTP_BUFFER_INIT; |
| GstRTPBuffer rtp_b = GST_RTP_BUFFER_INIT; |
| guint seq_a, seq_b; |
| |
| gst_rtp_buffer_map (a, GST_MAP_READ, &rtp_a); |
| seq_a = gst_rtp_buffer_get_seq (&rtp_a); |
| gst_rtp_buffer_unmap (&rtp_a); |
| |
| gst_rtp_buffer_map (b, GST_MAP_READ, &rtp_b); |
| seq_b = gst_rtp_buffer_get_seq (&rtp_b); |
| gst_rtp_buffer_unmap (&rtp_b); |
| |
| return gst_rtp_buffer_compare_seqnum (seq_b, seq_a); |
| } |
| |
| static gboolean |
| handle_big_gap_buffer (GstRtpJitterBuffer * jitterbuffer, gboolean future, |
| GstBuffer * buffer, guint8 pt, guint16 seqnum, gint gap, guint max_dropout, |
| guint max_misorder) |
| { |
| GstRtpJitterBufferPrivate *priv; |
| guint gap_packets_length; |
| gboolean reset = FALSE; |
| |
| priv = jitterbuffer->priv; |
| |
| if ((gap_packets_length = g_queue_get_length (&priv->gap_packets)) > 0) { |
| GList *l; |
| guint32 prev_gap_seq = -1; |
| gboolean all_consecutive = TRUE; |
| |
| g_queue_insert_sorted (&priv->gap_packets, buffer, |
| (GCompareDataFunc) compare_buffer_seqnum, NULL); |
| |
| for (l = priv->gap_packets.head; l; l = l->next) { |
| GstBuffer *gap_buffer = l->data; |
| GstRTPBuffer gap_rtp = GST_RTP_BUFFER_INIT; |
| guint32 gap_seq; |
| |
| gst_rtp_buffer_map (gap_buffer, GST_MAP_READ, &gap_rtp); |
| |
| all_consecutive = (gst_rtp_buffer_get_payload_type (&gap_rtp) == pt); |
| |
| gap_seq = gst_rtp_buffer_get_seq (&gap_rtp); |
| if (prev_gap_seq == -1) |
| prev_gap_seq = gap_seq; |
| else if (gst_rtp_buffer_compare_seqnum (gap_seq, prev_gap_seq) != -1) |
| all_consecutive = FALSE; |
| else |
| prev_gap_seq = gap_seq; |
| |
| gst_rtp_buffer_unmap (&gap_rtp); |
| if (!all_consecutive) |
| break; |
| } |
| |
| if (all_consecutive && gap_packets_length > 3) { |
| GST_DEBUG_OBJECT (jitterbuffer, |
| "buffer too %s %d < %d, got 5 consecutive ones - reset", |
| (future ? "new" : "old"), gap, |
| (future ? max_dropout : -max_misorder)); |
| reset = TRUE; |
| } else if (!all_consecutive) { |
| g_queue_foreach (&priv->gap_packets, (GFunc) gst_buffer_unref, NULL); |
| g_queue_clear (&priv->gap_packets); |
| GST_DEBUG_OBJECT (jitterbuffer, |
| "buffer too %s %d < %d, got no 5 consecutive ones - dropping", |
| (future ? "new" : "old"), gap, |
| (future ? max_dropout : -max_misorder)); |
| buffer = NULL; |
| } else { |
| GST_DEBUG_OBJECT (jitterbuffer, |
| "buffer too %s %d < %d, got %u consecutive ones - waiting", |
| (future ? "new" : "old"), gap, |
| (future ? max_dropout : -max_misorder), gap_packets_length + 1); |
| buffer = NULL; |
| } |
| } else { |
| GST_DEBUG_OBJECT (jitterbuffer, |
| "buffer too %s %d < %d, first one - waiting", (future ? "new" : "old"), |
| gap, -max_misorder); |
| g_queue_push_tail (&priv->gap_packets, buffer); |
| buffer = NULL; |
| } |
| |
| return reset; |
| } |
| |
| static GstClockTime |
| get_current_running_time (GstRtpJitterBuffer * jitterbuffer) |
| { |
| GstClock *clock = gst_element_get_clock (GST_ELEMENT_CAST (jitterbuffer)); |
| GstClockTime running_time = GST_CLOCK_TIME_NONE; |
| |
| if (clock) { |
| GstClockTime base_time = |
| gst_element_get_base_time (GST_ELEMENT_CAST (jitterbuffer)); |
| GstClockTime clock_time = gst_clock_get_time (clock); |
| |
| if (clock_time > base_time) |
| running_time = clock_time - base_time; |
| else |
| running_time = 0; |
| |
| gst_object_unref (clock); |
| } |
| |
| return running_time; |
| } |
| |
| static GstFlowReturn |
| gst_rtp_jitter_buffer_chain (GstPad * pad, GstObject * parent, |
| GstBuffer * buffer) |
| { |
| GstRtpJitterBuffer *jitterbuffer; |
| GstRtpJitterBufferPrivate *priv; |
| guint16 seqnum; |
| guint32 expected, rtptime; |
| GstFlowReturn ret = GST_FLOW_OK; |
| GstClockTime dts, pts; |
| guint64 latency_ts; |
| gboolean head; |
| gint percent = -1; |
| guint8 pt; |
| GstRTPBuffer rtp = GST_RTP_BUFFER_INIT; |
| gboolean do_next_seqnum = FALSE; |
| RTPJitterBufferItem *item; |
| GstMessage *msg = NULL; |
| gboolean estimated_dts = FALSE; |
| guint32 packet_rate, max_dropout, max_misorder; |
| TimerData *timer = NULL; |
| |
| jitterbuffer = GST_RTP_JITTER_BUFFER_CAST (parent); |
| |
| priv = jitterbuffer->priv; |
| |
| if (G_UNLIKELY (!gst_rtp_buffer_map (buffer, GST_MAP_READ, &rtp))) |
| goto invalid_buffer; |
| |
| pt = gst_rtp_buffer_get_payload_type (&rtp); |
| seqnum = gst_rtp_buffer_get_seq (&rtp); |
| rtptime = gst_rtp_buffer_get_timestamp (&rtp); |
| gst_rtp_buffer_unmap (&rtp); |
| |
| /* make sure we have PTS and DTS set */ |
| pts = GST_BUFFER_PTS (buffer); |
| dts = GST_BUFFER_DTS (buffer); |
| if (dts == -1) |
| dts = pts; |
| else if (pts == -1) |
| pts = dts; |
| |
| if (dts == -1) { |
| /* If we have no DTS here, i.e. no capture time, get one from the |
| * clock now to have something to calculate with in the future. */ |
| dts = get_current_running_time (jitterbuffer); |
| pts = dts; |
| |
| /* Remember that we estimated the DTS if we are running already |
| * and this is not our first packet (or first packet after a reset). |
| * If it's the first packet, we somehow must generate a timestamp for |
| * everything, otherwise we can't calculate any times |
| */ |
| estimated_dts = (priv->next_in_seqnum != -1); |
| } else { |
| /* take the DTS of the buffer. This is the time when the packet was |
| * received and is used to calculate jitter and clock skew. We will adjust |
| * this DTS with the smoothed value after processing it in the |
| * jitterbuffer and assign it as the PTS. */ |
| /* bring to running time */ |
| dts = gst_segment_to_running_time (&priv->segment, GST_FORMAT_TIME, dts); |
| } |
| |
| GST_DEBUG_OBJECT (jitterbuffer, |
| "Received packet #%d at time %" GST_TIME_FORMAT ", discont %d, rtx %d", |
| seqnum, GST_TIME_ARGS (dts), GST_BUFFER_IS_DISCONT (buffer), |
| GST_BUFFER_IS_RETRANSMISSION (buffer)); |
| |
| JBUF_LOCK_CHECK (priv, out_flushing); |
| |
| if (G_UNLIKELY (priv->last_pt != pt)) { |
| GstCaps *caps; |
| |
| GST_DEBUG_OBJECT (jitterbuffer, "pt changed from %u to %u", priv->last_pt, |
| pt); |
| |
| priv->last_pt = pt; |
| /* reset clock-rate so that we get a new one */ |
| priv->clock_rate = -1; |
| |
| /* Try to get the clock-rate from the caps first if we can. If there are no |
| * caps we must fire the signal to get the clock-rate. */ |
| if ((caps = gst_pad_get_current_caps (pad))) { |
| gst_jitter_buffer_sink_parse_caps (jitterbuffer, caps, pt); |
| gst_caps_unref (caps); |
| } |
| } |
| |
| if (G_UNLIKELY (priv->clock_rate == -1)) { |
| /* no clock rate given on the caps, try to get one with the signal */ |
| if (gst_rtp_jitter_buffer_get_clock_rate (jitterbuffer, |
| pt) == GST_FLOW_FLUSHING) |
| goto out_flushing; |
| |
| if (G_UNLIKELY (priv->clock_rate == -1)) |
| goto no_clock_rate; |
| |
| gst_rtp_packet_rate_ctx_reset (&priv->packet_rate_ctx, priv->clock_rate); |
| } |
| |
| /* don't accept more data on EOS */ |
| if (G_UNLIKELY (priv->eos)) |
| goto have_eos; |
| |
| if (!GST_BUFFER_IS_RETRANSMISSION (buffer)) |
| calculate_jitter (jitterbuffer, dts, rtptime); |
| |
| if (priv->seqnum_base != -1) { |
| gint gap; |
| |
| gap = gst_rtp_buffer_compare_seqnum (priv->seqnum_base, seqnum); |
| |
| if (gap < 0) { |
| GST_DEBUG_OBJECT (jitterbuffer, |
| "packet seqnum #%d before seqnum-base #%d", seqnum, |
| priv->seqnum_base); |
| gst_buffer_unref (buffer); |
| ret = GST_FLOW_OK; |
| goto finished; |
| } else if (gap > 16384) { |
| /* From now on don't compare against the seqnum base anymore as |
| * at some point in the future we will wrap around and also that |
| * much reordering is very unlikely */ |
| priv->seqnum_base = -1; |
| } |
| } |
| |
| expected = priv->next_in_seqnum; |
| |
| packet_rate = |
| gst_rtp_packet_rate_ctx_update (&priv->packet_rate_ctx, seqnum, rtptime); |
| max_dropout = |
| gst_rtp_packet_rate_ctx_get_max_dropout (&priv->packet_rate_ctx, |
| priv->max_dropout_time); |
| max_misorder = |
| gst_rtp_packet_rate_ctx_get_max_misorder (&priv->packet_rate_ctx, |
| priv->max_misorder_time); |
| GST_TRACE_OBJECT (jitterbuffer, |
| "packet_rate: %d, max_dropout: %d, max_misorder: %d", packet_rate, |
| max_dropout, max_misorder); |
| |
| /* now check against our expected seqnum */ |
| if (G_LIKELY (expected != -1)) { |
| gint gap; |
| |
| /* now calculate gap */ |
| gap = gst_rtp_buffer_compare_seqnum (expected, seqnum); |
| |
| GST_DEBUG_OBJECT (jitterbuffer, "expected #%d, got #%d, gap of %d", |
| expected, seqnum, gap); |
| |
| if (G_LIKELY (gap == 0)) { |
| /* packet is expected */ |
| calculate_packet_spacing (jitterbuffer, rtptime, dts); |
| do_next_seqnum = TRUE; |
| } else { |
| gboolean reset = FALSE; |
| |
| if (gap < 0) { |
| /* we received an old packet */ |
| if (G_UNLIKELY (gap != -1 && gap < -max_misorder)) { |
| reset = |
| handle_big_gap_buffer (jitterbuffer, FALSE, buffer, pt, seqnum, |
| gap, max_dropout, max_misorder); |
| buffer = NULL; |
| } else { |
| GST_DEBUG_OBJECT (jitterbuffer, "old packet received"); |
| } |
| } else { |
| /* new packet, we are missing some packets */ |
| if (G_UNLIKELY (priv->timers->len >= max_dropout)) { |
| /* If we have timers for more than RTP_MAX_DROPOUT packets |
| * pending this means that we have a huge gap overall. We can |
| * reset the jitterbuffer at this point because there's |
| * just too much data missing to be able to do anything |
| * sensible with the past data. Just try again from the |
| * next packet */ |
| GST_WARNING_OBJECT (jitterbuffer, |
| "%d pending timers > %d - resetting", priv->timers->len, |
| max_dropout); |
| reset = TRUE; |
| gst_buffer_unref (buffer); |
| buffer = NULL; |
| } else if (G_UNLIKELY (gap >= max_dropout)) { |
| reset = |
| handle_big_gap_buffer (jitterbuffer, TRUE, buffer, pt, seqnum, |
| gap, max_dropout, max_misorder); |
| buffer = NULL; |
| } else { |
| GST_DEBUG_OBJECT (jitterbuffer, "%d missing packets", gap); |
| /* fill in the gap with EXPECTED timers */ |
| calculate_expected (jitterbuffer, expected, seqnum, dts, gap); |
| |
| do_next_seqnum = TRUE; |
| } |
| } |
| if (G_UNLIKELY (reset)) { |
| GList *events = NULL, *l; |
| GList *buffers; |
| |
| GST_DEBUG_OBJECT (jitterbuffer, "flush and reset jitterbuffer"); |
| rtp_jitter_buffer_flush (priv->jbuf, |
| (GFunc) free_item_and_retain_events, &events); |
| rtp_jitter_buffer_reset_skew (priv->jbuf); |
| remove_all_timers (jitterbuffer); |
| priv->discont = TRUE; |
| priv->last_popped_seqnum = -1; |
| |
| if (priv->gap_packets.head) { |
| GstBuffer *gap_buffer = priv->gap_packets.head->data; |
| GstRTPBuffer gap_rtp = GST_RTP_BUFFER_INIT; |
| |
| gst_rtp_buffer_map (gap_buffer, GST_MAP_READ, &gap_rtp); |
| priv->next_seqnum = gst_rtp_buffer_get_seq (&gap_rtp); |
| gst_rtp_buffer_unmap (&gap_rtp); |
| } else { |
| priv->next_seqnum = seqnum; |
| } |
| |
| priv->last_in_dts = -1; |
| priv->next_in_seqnum = -1; |
| |
| /* Insert all sticky events again in order, otherwise we would |
| * potentially loose STREAM_START, CAPS or SEGMENT events |
| */ |
| events = g_list_reverse (events); |
| for (l = events; l; l = l->next) { |
| RTPJitterBufferItem *item; |
| |
| item = alloc_item (l->data, ITEM_TYPE_EVENT, -1, -1, -1, 0, -1); |
| rtp_jitter_buffer_insert (priv->jbuf, item, &head, NULL, -1); |
| } |
| g_list_free (events); |
| |
| JBUF_SIGNAL_EVENT (priv); |
| |
| /* reset spacing estimation when gap */ |
| priv->ips_rtptime = -1; |
| priv->ips_dts = GST_CLOCK_TIME_NONE; |
| |
| buffers = g_list_copy (priv->gap_packets.head); |
| g_queue_clear (&priv->gap_packets); |
| |
| priv->ips_rtptime = -1; |
| priv->ips_dts = GST_CLOCK_TIME_NONE; |
| JBUF_UNLOCK (jitterbuffer->priv); |
| |
| for (l = buffers; l; l = l->next) { |
| ret = gst_rtp_jitter_buffer_chain (pad, parent, l->data); |
| l->data = NULL; |
| if (ret != GST_FLOW_OK) { |
| l = l->next; |
| break; |
| } |
| } |
| for (; l; l = l->next) |
| gst_buffer_unref (l->data); |
| g_list_free (buffers); |
| |
| return ret; |
| } |
| /* reset spacing estimation when gap */ |
| priv->ips_rtptime = -1; |
| priv->ips_dts = GST_CLOCK_TIME_NONE; |
| } |
| } else { |
| GST_DEBUG_OBJECT (jitterbuffer, "First buffer #%d", seqnum); |
| |
| /* we don't know what the next_in_seqnum should be, wait for the last |
| * possible moment to push this buffer, maybe we get an earlier seqnum |
| * while we wait */ |
| set_timer (jitterbuffer, TIMER_TYPE_DEADLINE, seqnum, dts); |
| do_next_seqnum = TRUE; |
| /* take rtptime and dts to calculate packet spacing */ |
| priv->ips_rtptime = rtptime; |
| priv->ips_dts = dts; |
| } |
| |
| /* We had no huge gap, let's drop all the gap packets */ |
| if (buffer != NULL) { |
| GST_DEBUG_OBJECT (jitterbuffer, "Clearing gap packets"); |
| g_queue_foreach (&priv->gap_packets, (GFunc) gst_buffer_unref, NULL); |
| g_queue_clear (&priv->gap_packets); |
| } else { |
| GST_DEBUG_OBJECT (jitterbuffer, |
| "Had big gap, waiting for more consecutive packets"); |
| JBUF_UNLOCK (jitterbuffer->priv); |
| return GST_FLOW_OK; |
| } |
| |
| if (do_next_seqnum) { |
| priv->last_in_dts = dts; |
| priv->next_in_seqnum = (seqnum + 1) & 0xffff; |
| } |
| |
| timer = find_timer (jitterbuffer, seqnum); |
| if (GST_BUFFER_IS_RETRANSMISSION (buffer)) { |
| if (!timer) |
| timer = timer_queue_find (priv->rtx_stats_timers, seqnum); |
| if (timer) |
| timer->num_rtx_received++; |
| } |
| |
| /* let's check if this buffer is too late, we can only accept packets with |
| * bigger seqnum than the one we last pushed. */ |
| if (G_LIKELY (priv->last_popped_seqnum != -1)) { |
| gint gap; |
| |
| gap = gst_rtp_buffer_compare_seqnum (priv->last_popped_seqnum, seqnum); |
| |
| /* priv->last_popped_seqnum >= seqnum, we're too late. */ |
| if (G_UNLIKELY (gap <= 0)) { |
| if (priv->do_retransmission) { |
| if (GST_BUFFER_IS_RETRANSMISSION (buffer) && timer) { |
| update_rtx_stats (jitterbuffer, timer, dts, FALSE); |
| /* Only count the retranmitted packet too late if it has been |
| * considered lost. If the original packet arrived before the |
| * retransmitted we just count it as a duplicate. */ |
| if (timer->type != TIMER_TYPE_LOST) |
| goto rtx_duplicate; |
| } |
| } |
| goto too_late; |
| } |
| } |
| |
| if (already_lost (jitterbuffer, seqnum)) |
| goto already_lost; |
| |
| /* let's drop oldest packet if the queue is already full and drop-on-latency |
| * is set. We can only do this when there actually is a latency. When no |
| * latency is set, we just pump it in the queue and let the other end push it |
| * out as fast as possible. */ |
| if (priv->latency_ms && priv->drop_on_latency) { |
| latency_ts = |
| gst_util_uint64_scale_int (priv->latency_ms, priv->clock_rate, 1000); |
| |
| if (G_UNLIKELY (rtp_jitter_buffer_get_ts_diff (priv->jbuf) >= latency_ts)) { |
| RTPJitterBufferItem *old_item; |
| |
| old_item = rtp_jitter_buffer_peek (priv->jbuf); |
| |
| if (IS_DROPABLE (old_item)) { |
| old_item = rtp_jitter_buffer_pop (priv->jbuf, &percent); |
| GST_DEBUG_OBJECT (jitterbuffer, "Queue full, dropping old packet %p", |
| old_item); |
| priv->next_seqnum = (old_item->seqnum + old_item->count) & 0xffff; |
| free_item (old_item); |
| } |
| /* we might have removed some head buffers, signal the pushing thread to |
| * see if it can push now */ |
| JBUF_SIGNAL_EVENT (priv); |
| } |
| } |
| |
| /* If we estimated the DTS, don't consider it in the clock skew calculations |
| * later. The code above always sets dts to pts or the other way around if |
| * any of those is valid in the buffer, so we know that if we estimated the |
| * dts that both are unknown */ |
| if (estimated_dts) |
| item = |
| alloc_item (buffer, ITEM_TYPE_BUFFER, GST_CLOCK_TIME_NONE, |
| GST_CLOCK_TIME_NONE, seqnum, 1, rtptime); |
| else |
| item = alloc_item (buffer, ITEM_TYPE_BUFFER, dts, pts, seqnum, 1, rtptime); |
| |
| /* now insert the packet into the queue in sorted order. This function returns |
| * FALSE if a packet with the same seqnum was already in the queue, meaning we |
| * have a duplicate. */ |
| if (G_UNLIKELY (!rtp_jitter_buffer_insert (priv->jbuf, item, |
| &head, &percent, |
| gst_element_get_base_time (GST_ELEMENT_CAST (jitterbuffer))))) { |
| if (GST_BUFFER_IS_RETRANSMISSION (buffer) && timer) |
| update_rtx_stats (jitterbuffer, timer, dts, FALSE); |
| goto duplicate; |
| } |
| |
| /* update timers */ |
| update_timers (jitterbuffer, seqnum, dts, do_next_seqnum, |
| GST_BUFFER_IS_RETRANSMISSION (buffer), timer); |
| |
| /* we had an unhandled SR, handle it now */ |
| if (priv->last_sr) |
| do_handle_sync (jitterbuffer); |
| |
| if (G_UNLIKELY (head)) { |
| /* signal addition of new buffer when the _loop is waiting. */ |
| if (G_LIKELY (priv->active)) |
| JBUF_SIGNAL_EVENT (priv); |
| |
| /* let's unschedule and unblock any waiting buffers. We only want to do this |
| * when the head buffer changed */ |
| if (G_UNLIKELY (priv->clock_id)) { |
| GST_DEBUG_OBJECT (jitterbuffer, "Unscheduling waiting new buffer"); |
| unschedule_current_timer (jitterbuffer); |
| } |
| } |
| |
| GST_DEBUG_OBJECT (jitterbuffer, |
| "Pushed packet #%d, now %d packets, head: %d, " "percent %d", seqnum, |
| rtp_jitter_buffer_num_packets (priv->jbuf), head, percent); |
| |
| msg = check_buffering_percent (jitterbuffer, percent); |
| |
| finished: |
| JBUF_UNLOCK (priv); |
| |
| if (msg) |
| gst_element_post_message (GST_ELEMENT_CAST (jitterbuffer), msg); |
| |
| return ret; |
| |
| /* ERRORS */ |
| invalid_buffer: |
| { |
| /* this is not fatal but should be filtered earlier */ |
| GST_ELEMENT_WARNING (jitterbuffer, STREAM, DECODE, (NULL), |
| ("Received invalid RTP payload, dropping")); |
| gst_buffer_unref (buffer); |
| return GST_FLOW_OK; |
| } |
| no_clock_rate: |
| { |
| GST_WARNING_OBJECT (jitterbuffer, |
| "No clock-rate in caps!, dropping buffer"); |
| gst_buffer_unref (buffer); |
| goto finished; |
| } |
| out_flushing: |
| { |
| ret = priv->srcresult; |
| GST_DEBUG_OBJECT (jitterbuffer, "flushing %s", gst_flow_get_name (ret)); |
| gst_buffer_unref (buffer); |
| goto finished; |
| } |
| have_eos: |
| { |
| ret = GST_FLOW_EOS; |
| GST_WARNING_OBJECT (jitterbuffer, "we are EOS, refusing buffer"); |
| gst_buffer_unref (buffer); |
| goto finished; |
| } |
| too_late: |
| { |
| GST_DEBUG_OBJECT (jitterbuffer, "Packet #%d too late as #%d was already" |
| " popped, dropping", seqnum, priv->last_popped_seqnum); |
| priv->num_late++; |
| gst_buffer_unref (buffer); |
| goto finished; |
| } |
| already_lost: |
| { |
| GST_DEBUG_OBJECT (jitterbuffer, "Packet #%d too late as it was already " |
| "considered lost", seqnum); |
| priv->num_late++; |
| gst_buffer_unref (buffer); |
| goto finished; |
| } |
| duplicate: |
| { |
| GST_DEBUG_OBJECT (jitterbuffer, "Duplicate packet #%d detected, dropping", |
| seqnum); |
| priv->num_duplicates++; |
| free_item (item); |
| goto finished; |
| } |
| rtx_duplicate: |
| { |
| GST_DEBUG_OBJECT (jitterbuffer, |
| "Duplicate RTX packet #%d detected, dropping", seqnum); |
| priv->num_duplicates++; |
| gst_buffer_unref (buffer); |
| goto finished; |
| } |
| } |
| |
| static GstClockTime |
| compute_elapsed (GstRtpJitterBuffer * jitterbuffer, RTPJitterBufferItem * item) |
| { |
| guint64 ext_time, elapsed; |
| guint32 rtp_time; |
| GstRtpJitterBufferPrivate *priv; |
| |
| priv = jitterbuffer->priv; |
| rtp_time = item->rtptime; |
| |
| GST_LOG_OBJECT (jitterbuffer, "rtp %" G_GUINT32_FORMAT ", ext %" |
| G_GUINT64_FORMAT, rtp_time, priv->ext_timestamp); |
| |
| ext_time = priv->ext_timestamp; |
| ext_time = gst_rtp_buffer_ext_timestamp (&ext_time, rtp_time); |
| if (ext_time < priv->ext_timestamp) { |
| ext_time = priv->ext_timestamp; |
| } else { |
| priv->ext_timestamp = ext_time; |
| } |
| |
| if (ext_time > priv->clock_base) |
| elapsed = ext_time - priv->clock_base; |
| else |
| elapsed = 0; |
| |
| elapsed = gst_util_uint64_scale_int (elapsed, GST_SECOND, priv->clock_rate); |
| return elapsed; |
| } |
| |
| static void |
| update_estimated_eos (GstRtpJitterBuffer * jitterbuffer, |
| RTPJitterBufferItem * item) |
| { |
| guint64 total, elapsed, left, estimated; |
| GstClockTime out_time; |
| GstRtpJitterBufferPrivate *priv = jitterbuffer->priv; |
| |
| if (priv->npt_stop == -1 || priv->ext_timestamp == -1 |
| || priv->clock_base == -1 || priv->clock_rate <= 0) |
| return; |
| |
| /* compute the elapsed time */ |
| elapsed = compute_elapsed (jitterbuffer, item); |
| |
| /* do nothing if elapsed time doesn't increment */ |
| if (priv->last_elapsed && elapsed <= priv->last_elapsed) |
| return; |
| |
| priv->last_elapsed = elapsed; |
| |
| /* this is the total time we need to play */ |
| total = priv->npt_stop - priv->npt_start; |
| GST_LOG_OBJECT (jitterbuffer, "total %" GST_TIME_FORMAT, |
| GST_TIME_ARGS (total)); |
| |
| /* this is how much time there is left */ |
| if (total > elapsed) |
| left = total - elapsed; |
| else |
| left = 0; |
| |
| /* if we have less time left that the size of the buffer, we will not |
| * be able to keep it filled, disabled buffering then */ |
| if (left < rtp_jitter_buffer_get_delay (priv->jbuf)) { |
| GST_DEBUG_OBJECT (jitterbuffer, "left %" GST_TIME_FORMAT |
| ", disable buffering close to EOS", GST_TIME_ARGS (left)); |
| rtp_jitter_buffer_disable_buffering (priv->jbuf, TRUE); |
| } |
| |
| /* this is the current time as running-time */ |
| out_time = item->dts; |
| |
| if (elapsed > 0) |
| estimated = gst_util_uint64_scale (out_time, total, elapsed); |
| else { |
| /* if there is almost nothing left, |
| * we may never advance enough to end up in the above case */ |
| if (total < GST_SECOND) |
| estimated = GST_SECOND; |
| else |
| estimated = -1; |
| } |
| GST_LOG_OBJECT (jitterbuffer, "elapsed %" GST_TIME_FORMAT ", estimated %" |
| GST_TIME_FORMAT, GST_TIME_ARGS (elapsed), GST_TIME_ARGS (estimated)); |
| |
| if (estimated != -1 && priv->estimated_eos != estimated) { |
| set_timer (jitterbuffer, TIMER_TYPE_EOS, -1, estimated); |
| priv->estimated_eos = estimated; |
| } |
| } |
| |
| /* take a buffer from the queue and push it */ |
| static GstFlowReturn |
| pop_and_push_next (GstRtpJitterBuffer * jitterbuffer, guint seqnum) |
| { |
| GstRtpJitterBufferPrivate *priv = jitterbuffer->priv; |
| GstFlowReturn result = GST_FLOW_OK; |
| RTPJitterBufferItem *item; |
| GstBuffer *outbuf = NULL; |
| GstEvent *outevent = NULL; |
| GstQuery *outquery = NULL; |
| GstClockTime dts, pts; |
| gint percent = -1; |
| gboolean do_push = TRUE; |
| guint type; |
| GstMessage *msg; |
| |
| /* when we get here we are ready to pop and push the buffer */ |
| item = rtp_jitter_buffer_pop (priv->jbuf, &percent); |
| type = item->type; |
| |
| switch (type) { |
| case ITEM_TYPE_BUFFER: |
| |
| /* we need to make writable to change the flags and timestamps */ |
| outbuf = gst_buffer_make_writable (item->data); |
| |
| if (G_UNLIKELY (priv->discont)) { |
| /* set DISCONT flag when we missed a packet. We pushed the buffer writable |
| * into the jitterbuffer so we can modify now. */ |
| GST_DEBUG_OBJECT (jitterbuffer, "mark output buffer discont"); |
| GST_BUFFER_FLAG_SET (outbuf, GST_BUFFER_FLAG_DISCONT); |
| priv->discont = FALSE; |
| } |
| if (G_UNLIKELY (priv->ts_discont)) { |
| GST_BUFFER_FLAG_SET (outbuf, GST_BUFFER_FLAG_RESYNC); |
| priv->ts_discont = FALSE; |
| } |
| |
| dts = |
| gst_segment_position_from_running_time (&priv->segment, |
| GST_FORMAT_TIME, item->dts); |
| pts = |
| gst_segment_position_from_running_time (&priv->segment, |
| GST_FORMAT_TIME, item->pts); |
| |
| /* apply timestamp with offset to buffer now */ |
| GST_BUFFER_DTS (outbuf) = apply_offset (jitterbuffer, dts); |
| GST_BUFFER_PTS (outbuf) = apply_offset (jitterbuffer, pts); |
| |
| /* update the elapsed time when we need to check against the npt stop time. */ |
| update_estimated_eos (jitterbuffer, item); |
| |
| priv->last_out_time = GST_BUFFER_PTS (outbuf); |
| break; |
| case ITEM_TYPE_LOST: |
| priv->discont = TRUE; |
| if (!priv->do_lost) |
| do_push = FALSE; |
| /* FALLTHROUGH */ |
| case ITEM_TYPE_EVENT: |
| outevent = item->data; |
| break; |
| case ITEM_TYPE_QUERY: |
| outquery = item->data; |
| break; |
| } |
| |
| /* now we are ready to push the buffer. Save the seqnum and release the lock |
| * so the other end can push stuff in the queue again. */ |
| if (seqnum != -1) { |
| priv->last_popped_seqnum = seqnum; |
| priv->next_seqnum = (seqnum + item->count) & 0xffff; |
| } |
| msg = check_buffering_percent (jitterbuffer, percent); |
| JBUF_UNLOCK (priv); |
| |
| item->data = NULL; |
| free_item (item); |
| |
| if (msg) |
| gst_element_post_message (GST_ELEMENT_CAST (jitterbuffer), msg); |
| |
| switch (type) { |
| case ITEM_TYPE_BUFFER: |
| /* push buffer */ |
| GST_DEBUG_OBJECT (jitterbuffer, |
| "Pushing buffer %d, dts %" GST_TIME_FORMAT ", pts %" GST_TIME_FORMAT, |
| seqnum, GST_TIME_ARGS (GST_BUFFER_DTS (outbuf)), |
| GST_TIME_ARGS (GST_BUFFER_PTS (outbuf))); |
| priv->num_pushed++; |
| result = gst_pad_push (priv->srcpad, outbuf); |
| |
| JBUF_LOCK_CHECK (priv, out_flushing); |
| break; |
| case ITEM_TYPE_LOST: |
| case ITEM_TYPE_EVENT: |
| /* We got not enough consecutive packets with a huge gap, we can |
| * as well just drop them here now on EOS */ |
| if (outevent && GST_EVENT_TYPE (outevent) == GST_EVENT_EOS) { |
| GST_DEBUG_OBJECT (jitterbuffer, "Clearing gap packets on EOS"); |
| g_queue_foreach (&priv->gap_packets, (GFunc) gst_buffer_unref, NULL); |
| g_queue_clear (&priv->gap_packets); |
| } |
| |
| GST_DEBUG_OBJECT (jitterbuffer, "%sPushing event %" GST_PTR_FORMAT |
| ", seqnum %d", do_push ? "" : "NOT ", outevent, seqnum); |
| |
| if (do_push) |
| gst_pad_push_event (priv->srcpad, outevent); |
| else if (outevent) |
| gst_event_unref (outevent); |
| |
| result = GST_FLOW_OK; |
| |
| JBUF_LOCK_CHECK (priv, out_flushing); |
| break; |
| case ITEM_TYPE_QUERY: |
| { |
| gboolean res; |
| |
| res = gst_pad_peer_query (priv->srcpad, outquery); |
| |
| JBUF_LOCK_CHECK (priv, out_flushing); |
| result = GST_FLOW_OK; |
| GST_LOG_OBJECT (jitterbuffer, "did query %p, return %d", outquery, res); |
| JBUF_SIGNAL_QUERY (priv, res); |
| break; |
| } |
| } |
| return result; |
| |
| /* ERRORS */ |
| out_flushing: |
| { |
| return priv->srcresult; |
| } |
| } |
| |
| #define GST_FLOW_WAIT GST_FLOW_CUSTOM_SUCCESS |
| |
| /* Peek a buffer and compare the seqnum to the expected seqnum. |
| * If all is fine, the buffer is pushed. |
| * If something is wrong, we wait for some event |
| */ |
| static GstFlowReturn |
| handle_next_buffer (GstRtpJitterBuffer * jitterbuffer) |
| { |
| GstRtpJitterBufferPrivate *priv = jitterbuffer->priv; |
| GstFlowReturn result; |
| RTPJitterBufferItem *item; |
| guint seqnum; |
| guint32 next_seqnum; |
| |
| /* only push buffers when PLAYING and active and not buffering */ |
| if (priv->blocked || !priv->active || |
| rtp_jitter_buffer_is_buffering (priv->jbuf)) { |
| return GST_FLOW_WAIT; |
| } |
| |
| /* peek a buffer, we're just looking at the sequence number. |
| * If all is fine, we'll pop and push it. If the sequence number is wrong we |
| * wait for a timeout or something to change. |
| * The peeked buffer is valid for as long as we hold the jitterbuffer lock. */ |
| item = rtp_jitter_buffer_peek (priv->jbuf); |
| if (item == NULL) { |
| goto wait; |
| } |
| |
| /* get the seqnum and the next expected seqnum */ |
| seqnum = item->seqnum; |
| if (seqnum == -1) { |
| return pop_and_push_next (jitterbuffer, seqnum); |
| } |
| |
| next_seqnum = priv->next_seqnum; |
| |
| /* get the gap between this and the previous packet. If we don't know the |
| * previous packet seqnum assume no gap. */ |
| if (G_UNLIKELY (next_seqnum == -1)) { |
| GST_DEBUG_OBJECT (jitterbuffer, "First buffer #%d", seqnum); |
| /* we don't know what the next_seqnum should be, the chain function should |
| * have scheduled a DEADLINE timer that will increment next_seqnum when it |
| * fires, so wait for that */ |
| result = GST_FLOW_WAIT; |
| } else { |
| gint gap = gst_rtp_buffer_compare_seqnum (next_seqnum, seqnum); |
| |
| if (G_LIKELY (gap == 0)) { |
| /* no missing packet, pop and push */ |
| result = pop_and_push_next (jitterbuffer, seqnum); |
| } else if (G_UNLIKELY (gap < 0)) { |
| /* if we have a packet that we already pushed or considered dropped, pop it |
| * off and get the next packet */ |
| GST_DEBUG_OBJECT (jitterbuffer, "Old packet #%d, next #%d dropping", |
| seqnum, next_seqnum); |
| item = rtp_jitter_buffer_pop (priv->jbuf, NULL); |
| free_item (item); |
| result = GST_FLOW_OK; |
| } else { |
| /* the chain function has scheduled timers to request retransmission or |
| * when to consider the packet lost, wait for that */ |
| GST_DEBUG_OBJECT (jitterbuffer, |
| "Sequence number GAP detected: expected %d instead of %d (%d missing)", |
| next_seqnum, seqnum, gap); |
| result = GST_FLOW_WAIT; |
| } |
| } |
| |
| return result; |
| |
| wait: |
| { |
| GST_DEBUG_OBJECT (jitterbuffer, "no buffer, going to wait"); |
| if (priv->eos) { |
| return GST_FLOW_EOS; |
| } else { |
| return GST_FLOW_WAIT; |
| } |
| } |
| } |
| |
| static GstClockTime |
| get_rtx_retry_timeout (GstRtpJitterBufferPrivate * priv) |
| { |
| GstClockTime rtx_retry_timeout; |
| GstClockTime rtx_min_retry_timeout; |
| |
| if (priv->rtx_retry_timeout == -1) { |
| if (priv->avg_rtx_rtt == 0) |
| rtx_retry_timeout = DEFAULT_AUTO_RTX_TIMEOUT; |
| else |
| /* we want to ask for a retransmission after we waited for a |
| * complete RTT and the additional jitter */ |
| rtx_retry_timeout = priv->avg_rtx_rtt + priv->avg_jitter * 2; |
| } else { |
| rtx_retry_timeout = priv->rtx_retry_timeout * GST_MSECOND; |
| } |
| /* make sure we don't retry too often. On very low latency networks, |
| * the RTT and jitter can be very low. */ |
| if (priv->rtx_min_retry_timeout == -1) { |
| rtx_min_retry_timeout = priv->packet_spacing; |
| } else { |
| rtx_min_retry_timeout = priv->rtx_min_retry_timeout * GST_MSECOND; |
| } |
| rtx_retry_timeout = MAX (rtx_retry_timeout, rtx_min_retry_timeout); |
| |
| return rtx_retry_timeout; |
| } |
| |
| static GstClockTime |
| get_rtx_retry_period (GstRtpJitterBufferPrivate * priv, |
| GstClockTime rtx_retry_timeout) |
| { |
| GstClockTime rtx_retry_period; |
| |
| if (priv->rtx_retry_period == -1) { |
| /* we retry up to the configured jitterbuffer size but leaving some |
| * room for the retransmission to arrive in time */ |
| if (rtx_retry_timeout > priv->latency_ns) { |
| rtx_retry_period = 0; |
| } else { |
| rtx_retry_period = priv->latency_ns - rtx_retry_timeout; |
| } |
| } else { |
| rtx_retry_period = priv->rtx_retry_period * GST_MSECOND; |
| } |
| return rtx_retry_period; |
| } |
| |
| /* |
| 1. For *larger* rtx-rtt, weigh a new measurement as before (1/8th) |
| 2. For *smaller* rtx-rtt, be a bit more conservative and weigh a bit less (1/16th) |
| 3. For very large measurements (> avg * 2), consider them "outliers" |
| and count them a lot less (1/48th) |
| */ |
| static void |
| update_avg_rtx_rtt (GstRtpJitterBufferPrivate * priv, GstClockTime rtt) |
| { |
| gint weight; |
| |
| if (priv->avg_rtx_rtt == 0) { |
| priv->avg_rtx_rtt = rtt; |
| return; |
| } |
| |
| if (rtt > 2 * priv->avg_rtx_rtt) |
| weight = 48; |
| else if (rtt > priv->avg_rtx_rtt) |
| weight = 8; |
| else |
| weight = 16; |
| |
| priv->avg_rtx_rtt = (rtt + (weight - 1) * priv->avg_rtx_rtt) / weight; |
| } |
| |
| static void |
| update_rtx_stats (GstRtpJitterBuffer * jitterbuffer, TimerData * timer, |
| GstClockTime dts, gboolean success) |
| { |
| GstRtpJitterBufferPrivate *priv = jitterbuffer->priv; |
| GstClockTime delay; |
| |
| if (success) { |
| /* we scheduled a retry for this packet and now we have it */ |
| priv->num_rtx_success++; |
| /* all the previous retry attempts failed */ |
| priv->num_rtx_failed += timer->num_rtx_retry - 1; |
| } else { |
| /* All retries failed or was too late */ |
| priv->num_rtx_failed += timer->num_rtx_retry; |
| } |
| |
| /* number of retries before (hopefully) receiving the packet */ |
| if (priv->avg_rtx_num == 0.0) |
| priv->avg_rtx_num = timer->num_rtx_retry; |
| else |
| priv->avg_rtx_num = (timer->num_rtx_retry + 7 * priv->avg_rtx_num) / 8; |
| |
| /* Calculate the delay between retransmission request and receiving this |
| * packet. We have a valid delay if and only if this packet is a response to |
| * our last request. If not we don't know if this is a response to an |
| * earlier request and delay could be way off. For RTT is more important |
| * with correct values than to update for every packet. */ |
| if (timer->num_rtx_retry == timer->num_rtx_received && |
| dts != GST_CLOCK_TIME_NONE && dts > timer->rtx_last) { |
| delay = dts - timer->rtx_last; |
| update_avg_rtx_rtt (priv, delay); |
| } else { |
| delay = 0; |
| } |
| |
| GST_LOG_OBJECT (jitterbuffer, |
| "RTX #%d, result %d, success %" G_GUINT64_FORMAT ", failed %" |
| G_GUINT64_FORMAT ", requests %" G_GUINT64_FORMAT ", dups %" |
| G_GUINT64_FORMAT ", avg-num %g, delay %" GST_TIME_FORMAT ", avg-rtt %" |
| GST_TIME_FORMAT, timer->seqnum, success, priv->num_rtx_success, |
| priv->num_rtx_failed, priv->num_rtx_requests, priv->num_duplicates, |
| priv->avg_rtx_num, GST_TIME_ARGS (delay), |
| GST_TIME_ARGS (priv->avg_rtx_rtt)); |
| } |
| |
| /* the timeout for when we expected a packet expired */ |
| static gboolean |
| do_expected_timeout (GstRtpJitterBuffer * jitterbuffer, TimerData * timer, |
| GstClockTime now) |
| { |
| GstRtpJitterBufferPrivate *priv = jitterbuffer->priv; |
| GstEvent *event; |
| guint delay, delay_ms, avg_rtx_rtt_ms; |
| guint rtx_retry_timeout_ms, rtx_retry_period_ms; |
| guint rtx_deadline_ms; |
| GstClockTime rtx_retry_period; |
| GstClockTime rtx_retry_timeout; |
| GstClock *clock; |
| |
| GST_DEBUG_OBJECT (jitterbuffer, "expected %d didn't arrive, now %" |
| GST_TIME_FORMAT, timer->seqnum, GST_TIME_ARGS (now)); |
| |
| rtx_retry_timeout = get_rtx_retry_timeout (priv); |
| rtx_retry_period = get_rtx_retry_period (priv, rtx_retry_timeout); |
| |
| delay = timer->rtx_delay + timer->rtx_retry; |
| |
| delay_ms = GST_TIME_AS_MSECONDS (delay); |
| rtx_retry_timeout_ms = GST_TIME_AS_MSECONDS (rtx_retry_timeout); |
| rtx_retry_period_ms = GST_TIME_AS_MSECONDS (rtx_retry_period); |
| avg_rtx_rtt_ms = GST_TIME_AS_MSECONDS (priv->avg_rtx_rtt); |
| rtx_deadline_ms = |
| priv->rtx_deadline_ms != -1 ? priv->rtx_deadline_ms : priv->latency_ms; |
| |
| event = gst_event_new_custom (GST_EVENT_CUSTOM_UPSTREAM, |
| gst_structure_new ("GstRTPRetransmissionRequest", |
| "seqnum", G_TYPE_UINT, (guint) timer->seqnum, |
| "running-time", G_TYPE_UINT64, timer->rtx_base, |
| "delay", G_TYPE_UINT, delay_ms, |
| "retry", G_TYPE_UINT, timer->num_rtx_retry, |
| "frequency", G_TYPE_UINT, rtx_retry_timeout_ms, |
| "period", G_TYPE_UINT, rtx_retry_period_ms, |
| "deadline", G_TYPE_UINT, rtx_deadline_ms, |
| "packet-spacing", G_TYPE_UINT64, priv->packet_spacing, |
| "avg-rtt", G_TYPE_UINT, avg_rtx_rtt_ms, NULL)); |
| GST_DEBUG_OBJECT (jitterbuffer, "Request RTX: %" GST_PTR_FORMAT, event); |
| |
| priv->num_rtx_requests++; |
| timer->num_rtx_retry++; |
| |
| GST_OBJECT_LOCK (jitterbuffer); |
| if ((clock = GST_ELEMENT_CLOCK (jitterbuffer))) { |
| timer->rtx_last = gst_clock_get_time (clock); |
| timer->rtx_last -= GST_ELEMENT_CAST (jitterbuffer)->base_time; |
| } else { |
| timer->rtx_last = now; |
| } |
| GST_OBJECT_UNLOCK (jitterbuffer); |
| |
| /* calculate the timeout for the next retransmission attempt */ |
| timer->rtx_retry += rtx_retry_timeout; |
| GST_DEBUG_OBJECT (jitterbuffer, "base %" GST_TIME_FORMAT ", delay %" |
| GST_TIME_FORMAT ", retry %" GST_TIME_FORMAT ", num_retry %u", |
| GST_TIME_ARGS (timer->rtx_base), GST_TIME_ARGS (timer->rtx_delay), |
| GST_TIME_ARGS (timer->rtx_retry), timer->num_rtx_retry); |
| if ((priv->rtx_max_retries != -1 |
| && timer->num_rtx_retry >= priv->rtx_max_retries) |
| || (timer->rtx_retry + timer->rtx_delay > rtx_retry_period) |
| || (timer->rtx_base + rtx_retry_period < now)) { |
| GST_DEBUG_OBJECT (jitterbuffer, "reschedule as LOST timer"); |
| /* too many retransmission request, we now convert the timer |
| * to a lost timer, leave the num_rtx_retry as it is for stats */ |
| timer->type = TIMER_TYPE_LOST; |
| timer->rtx_delay = 0; |
| timer->rtx_retry = 0; |
| } |
| reschedule_timer (jitterbuffer, timer, timer->seqnum, |
| timer->rtx_base + timer->rtx_retry, timer->rtx_delay, FALSE); |
| |
| JBUF_UNLOCK (priv); |
| gst_pad_push_event (priv->sinkpad, event); |
| JBUF_LOCK (priv); |
| |
| return FALSE; |
| } |
| |
| /* a packet is lost */ |
| static gboolean |
| do_lost_timeout (GstRtpJitterBuffer * jitterbuffer, TimerData * timer, |
| GstClockTime now) |
| { |
| GstRtpJitterBufferPrivate *priv = jitterbuffer->priv; |
| guint seqnum, lost_packets, num_rtx_retry, next_in_seqnum; |
| gboolean head; |
| GstEvent *event = NULL; |
| RTPJitterBufferItem *item; |
| |
| seqnum = timer->seqnum; |
| lost_packets = MAX (timer->num, 1); |
| num_rtx_retry = timer->num_rtx_retry; |
| |
| /* we had a gap and thus we lost some packets. Create an event for this. */ |
| if (lost_packets > 1) |
| GST_DEBUG_OBJECT (jitterbuffer, "Packets #%d -> #%d lost", seqnum, |
| seqnum + lost_packets - 1); |
| else |
| GST_DEBUG_OBJECT (jitterbuffer, "Packet #%d lost", seqnum); |
| |
| priv->num_lost += lost_packets; |
| priv->num_rtx_failed += num_rtx_retry; |
| |
| next_in_seqnum = (seqnum + lost_packets) & 0xffff; |
| |
| /* we now only accept seqnum bigger than this */ |
| if (gst_rtp_buffer_compare_seqnum (priv->next_in_seqnum, next_in_seqnum) > 0) { |
| priv->next_in_seqnum = next_in_seqnum; |
| priv->last_in_dts = apply_offset (jitterbuffer, timer->timeout); |
| } |
| |
| /* Avoid creating events if we don't need it. Note that we still need to create |
| * the lost *ITEM* since it will be used to notify the outgoing thread of |
| * lost items (so that we can set discont flags and such) */ |
| if (priv->do_lost) { |
| GstClockTime duration, timestamp; |
| /* create paket lost event */ |
| timestamp = apply_offset (jitterbuffer, timer->timeout); |
| duration = timer->duration; |
| if (duration == GST_CLOCK_TIME_NONE && priv->packet_spacing > 0) |
| duration = priv->packet_spacing; |
| event = gst_event_new_custom (GST_EVENT_CUSTOM_DOWNSTREAM, |
| gst_structure_new ("GstRTPPacketLost", |
| "seqnum", G_TYPE_UINT, (guint) seqnum, |
| "timestamp", G_TYPE_UINT64, timestamp, |
| "duration", G_TYPE_UINT64, duration, |
| "retry", G_TYPE_UINT, num_rtx_retry, NULL)); |
| } |
| item = alloc_item (event, ITEM_TYPE_LOST, -1, -1, seqnum, lost_packets, -1); |
| rtp_jitter_buffer_insert (priv->jbuf, item, &head, NULL, -1); |
| |
| if (GST_CLOCK_TIME_IS_VALID (timer->rtx_last)) { |
| /* Store info to update stats if the packet arrives too late */ |
| timer_queue_append (priv->rtx_stats_timers, timer, |
| now + priv->rtx_stats_timeout * GST_MSECOND, TRUE); |
| } |
| remove_timer (jitterbuffer, timer); |
| |
| if (head) |
| JBUF_SIGNAL_EVENT (priv); |
| |
| return TRUE; |
| } |
| |
| static gboolean |
| do_eos_timeout (GstRtpJitterBuffer * jitterbuffer, TimerData * timer, |
| GstClockTime now) |
| { |
| GstRtpJitterBufferPrivate *priv = jitterbuffer->priv; |
| |
| GST_INFO_OBJECT (jitterbuffer, "got the NPT timeout"); |
| remove_timer (jitterbuffer, timer); |
| if (!priv->eos) { |
| /* there was no EOS in the buffer, put one in there now */ |
| queue_event (jitterbuffer, gst_event_new_eos ()); |
| } |
| JBUF_SIGNAL_EVENT (priv); |
| |
| return TRUE; |
| } |
| |
| static gboolean |
| do_deadline_timeout (GstRtpJitterBuffer * jitterbuffer, TimerData * timer, |
| GstClockTime now) |
| { |
| GstRtpJitterBufferPrivate *priv = jitterbuffer->priv; |
| |
| GST_INFO_OBJECT (jitterbuffer, "got deadline timeout"); |
| |
| /* timer seqnum might have been obsoleted by caps seqnum-base, |
| * only mess with current ongoing seqnum if still unknown */ |
| if (priv->next_seqnum == -1) |
| priv->next_seqnum = timer->seqnum; |
| remove_timer (jitterbuffer, timer); |
| JBUF_SIGNAL_EVENT (priv); |
| |
| return TRUE; |
| } |
| |
| static gboolean |
| do_timeout (GstRtpJitterBuffer * jitterbuffer, TimerData * timer, |
| GstClockTime now) |
| { |
| gboolean removed = FALSE; |
| |
| switch (timer->type) { |
| case TIMER_TYPE_EXPECTED: |
| removed = do_expected_timeout (jitterbuffer, timer, now); |
| break; |
| case TIMER_TYPE_LOST: |
| removed = do_lost_timeout (jitterbuffer, timer, now); |
| break; |
| case TIMER_TYPE_DEADLINE: |
| removed = do_deadline_timeout (jitterbuffer, timer, now); |
| break; |
| case TIMER_TYPE_EOS: |
| removed = do_eos_timeout (jitterbuffer, timer, now); |
| break; |
| } |
| return removed; |
| } |
| |
| /* called when we need to wait for the next timeout. |
| * |
| * We loop over the array of recorded timeouts and wait for the earliest one. |
| * When it timed out, do the logic associated with the timer. |
| * |
| * If there are no timers, we wait on a gcond until something new happens. |
| */ |
| static void |
| wait_next_timeout (GstRtpJitterBuffer * jitterbuffer) |
| { |
| GstRtpJitterBufferPrivate *priv = jitterbuffer->priv; |
| GstClockTime now = 0; |
| |
| JBUF_LOCK (priv); |
| while (priv->timer_running) { |
| TimerData *timer = NULL; |
| GstClockTime timer_timeout = -1; |
| gint i, len; |
| |
| /* If we have a clock, update "now" now with the very |
| * latest running time we have. If timers are unscheduled below we |
| * otherwise wouldn't update now (it's only updated when timers |
| * expire), and also for the very first loop iteration now would |
| * otherwise always be 0 |
| */ |
| GST_OBJECT_LOCK (jitterbuffer); |
| if (GST_ELEMENT_CLOCK (jitterbuffer)) { |
| now = |
| gst_clock_get_time (GST_ELEMENT_CLOCK (jitterbuffer)) - |
| GST_ELEMENT_CAST (jitterbuffer)->base_time; |
| } |
| GST_OBJECT_UNLOCK (jitterbuffer); |
| |
| GST_DEBUG_OBJECT (jitterbuffer, "now %" GST_TIME_FORMAT, |
| GST_TIME_ARGS (now)); |
| |
| /* Clear expired rtx-stats timers */ |
| if (priv->do_retransmission) |
| timer_queue_clear_until (priv->rtx_stats_timers, now); |
| |
| /* Iterate "normal" timers */ |
| len = priv->timers->len; |
| for (i = 0; i < len;) { |
| TimerData *test = &g_array_index (priv->timers, TimerData, i); |
| GstClockTime test_timeout = get_timeout (jitterbuffer, test); |
| gboolean save_best = FALSE; |
| |
| GST_DEBUG_OBJECT (jitterbuffer, |
| "%d, %d, %d, %" GST_TIME_FORMAT " diff:%" GST_STIME_FORMAT, i, |
| test->type, test->seqnum, GST_TIME_ARGS (test_timeout), |
| GST_STIME_ARGS ((gint64) (test_timeout - now))); |
| |
| /* Weed out anything too late */ |
| if (test->type == TIMER_TYPE_LOST && |
| (test_timeout == -1 || test_timeout <= now)) { |
| GST_DEBUG_OBJECT (jitterbuffer, "Weeding out late entry"); |
| do_lost_timeout (jitterbuffer, test, now); |
| if (!priv->timer_running) |
| break; |
| /* We don't move the iterator forward since we just removed the current entry, |
| * but we update the termination condition */ |
| len = priv->timers->len; |
| } else { |
| /* find the smallest timeout */ |
| if (timer == NULL) { |
| save_best = TRUE; |
| } else if (timer_timeout == -1) { |
| /* we already have an immediate timeout, the new timer must be an |
| * immediate timer with smaller seqnum to become the best */ |
| if (test_timeout == -1 |
| && (gst_rtp_buffer_compare_seqnum (test->seqnum, |
| timer->seqnum) > 0)) |
| save_best = TRUE; |
| } else if (test_timeout == -1) { |
| /* first immediate timer */ |
| save_best = TRUE; |
| } else if (test_timeout < timer_timeout) { |
| /* earlier timer */ |
| save_best = TRUE; |
| } else if (test_timeout == timer_timeout |
| && (gst_rtp_buffer_compare_seqnum (test->seqnum, |
| timer->seqnum) > 0)) { |
| /* same timer, smaller seqnum */ |
| save_best = TRUE; |
| } |
| |
| if (save_best) { |
| GST_DEBUG_OBJECT (jitterbuffer, "new best %d", i); |
| timer = test; |
| timer_timeout = test_timeout; |
| } |
| i++; |
| } |
| } |
| if (timer && !priv->blocked) { |
| GstClock *clock; |
| GstClockTime sync_time; |
| GstClockID id; |
| GstClockReturn ret; |
| GstClockTimeDiff clock_jitter; |
| |
| if (timer_timeout == -1 || timer_timeout <= now) { |
| /* We have normally removed all lost timers in the loop above */ |
| g_assert (timer->type != TIMER_TYPE_LOST); |
| |
| do_timeout (jitterbuffer, timer, now); |
| /* check here, do_timeout could have released the lock */ |
| if (!priv->timer_running) |
| break; |
| continue; |
| } |
| |
| GST_OBJECT_LOCK (jitterbuffer); |
| clock = GST_ELEMENT_CLOCK (jitterbuffer); |
| if (!clock) { |
| GST_OBJECT_UNLOCK (jitterbuffer); |
| /* let's just push if there is no clock */ |
| GST_DEBUG_OBJECT (jitterbuffer, "No clock, timeout right away"); |
| now = timer_timeout; |
| continue; |
| } |
| |
| /* prepare for sync against clock */ |
| sync_time = timer_timeout + GST_ELEMENT_CAST (jitterbuffer)->base_time; |
| /* add latency of peer to get input time */ |
| sync_time += priv->peer_latency; |
| |
| GST_DEBUG_OBJECT (jitterbuffer, "sync to timestamp %" GST_TIME_FORMAT |
| " with sync time %" GST_TIME_FORMAT, |
| GST_TIME_ARGS (timer_timeout), GST_TIME_ARGS (sync_time)); |
| |
| /* create an entry for the clock */ |
| id = priv->clock_id = gst_clock_new_single_shot_id (clock, sync_time); |
| priv->timer_timeout = timer_timeout; |
| priv->timer_seqnum = timer->seqnum; |
| GST_OBJECT_UNLOCK (jitterbuffer); |
| |
| /* release the lock so that the other end can push stuff or unlock */ |
| JBUF_UNLOCK (priv); |
| |
| ret = gst_clock_id_wait (id, &clock_jitter); |
| |
| JBUF_LOCK (priv); |
| if (!priv->timer_running) { |
| gst_clock_id_unref (id); |
| priv->clock_id = NULL; |
| break; |
| } |
| |
| if (ret != GST_CLOCK_UNSCHEDULED) { |
| now = timer_timeout + MAX (clock_jitter, 0); |
| GST_DEBUG_OBJECT (jitterbuffer, |
| "sync done, %d, #%d, %" GST_STIME_FORMAT, ret, priv->timer_seqnum, |
| GST_STIME_ARGS (clock_jitter)); |
| } else { |
| GST_DEBUG_OBJECT (jitterbuffer, "sync unscheduled"); |
| } |
| /* and free the entry */ |
| gst_clock_id_unref (id); |
| priv->clock_id = NULL; |
| } else { |
| /* no timers, wait for activity */ |
| JBUF_WAIT_TIMER (priv); |
| } |
| } |
| JBUF_UNLOCK (priv); |
| |
| GST_DEBUG_OBJECT (jitterbuffer, "we are stopping"); |
| return; |
| } |
| |
| /* |
| * This funcion implements the main pushing loop on the source pad. |
| * |
| * It first tries to push as many buffers as possible. If there is a seqnum |
| * mismatch, we wait for the next timeouts. |
| */ |
| static void |
| gst_rtp_jitter_buffer_loop (GstRtpJitterBuffer * jitterbuffer) |
| { |
| GstRtpJitterBufferPrivate *priv; |
| GstFlowReturn result = GST_FLOW_OK; |
| |
| priv = jitterbuffer->priv; |
| |
| JBUF_LOCK_CHECK (priv, flushing); |
| do { |
| result = handle_next_buffer (jitterbuffer); |
| if (G_LIKELY (result == GST_FLOW_WAIT)) { |
| /* now wait for the next event */ |
| JBUF_WAIT_EVENT (priv, flushing); |
| result = GST_FLOW_OK; |
| } |
| } while (result == GST_FLOW_OK); |
| /* store result for upstream */ |
| priv->srcresult = result; |
| /* if we get here we need to pause */ |
| goto pause; |
| |
| /* ERRORS */ |
| flushing: |
| { |
| result = priv->srcresult; |
| goto pause; |
| } |
| pause: |
| { |
| GstEvent *event; |
| |
| JBUF_SIGNAL_QUERY (priv, FALSE); |
| JBUF_UNLOCK (priv); |
| |
| GST_DEBUG_OBJECT (jitterbuffer, "pausing task, reason %s", |
| gst_flow_get_name (result)); |
| gst_pad_pause_task (priv->srcpad); |
| if (result == GST_FLOW_EOS) { |
| event = gst_event_new_eos (); |
| gst_pad_push_event (priv->srcpad, event); |
| } |
| return; |
| } |
| } |
| |
| /* collect the info from the lastest RTCP packet and the jitterbuffer sync, do |
| * some sanity checks and then emit the handle-sync signal with the parameters. |
| * This function must be called with the LOCK */ |
| static void |
| do_handle_sync (GstRtpJitterBuffer * jitterbuffer) |
| { |
| GstRtpJitterBufferPrivate *priv; |
| guint64 base_rtptime, base_time; |
| guint32 clock_rate; |
| guint64 last_rtptime; |
| guint64 clock_base; |
| guint64 ext_rtptime, diff; |
| gboolean valid = TRUE, keep = FALSE; |
| |
| priv = jitterbuffer->priv; |
| |
| /* get the last values from the jitterbuffer */ |
| rtp_jitter_buffer_get_sync (priv->jbuf, &base_rtptime, &base_time, |
| &clock_rate, &last_rtptime); |
| |
| clock_base = priv->clock_base; |
| ext_rtptime = priv->ext_rtptime; |
| |
| GST_DEBUG_OBJECT (jitterbuffer, "ext SR %" G_GUINT64_FORMAT ", base %" |
| G_GUINT64_FORMAT ", clock-rate %" G_GUINT32_FORMAT |
| ", clock-base %" G_GUINT64_FORMAT ", last-rtptime %" G_GUINT64_FORMAT, |
| ext_rtptime, base_rtptime, clock_rate, clock_base, last_rtptime); |
| |
| if (base_rtptime == -1 || clock_rate == -1 || base_time == -1) { |
| /* we keep this SR packet for later. When we get a valid RTP packet the |
| * above values will be set and we can try to use the SR packet */ |
| GST_DEBUG_OBJECT (jitterbuffer, "keeping for later, no RTP values"); |
| keep = TRUE; |
| } else { |
| /* we can't accept anything that happened before we did the last resync */ |
| if (base_rtptime > ext_rtptime) { |
| GST_DEBUG_OBJECT (jitterbuffer, "dropping, older than base time"); |
| valid = FALSE; |
| } else { |
| /* the SR RTP timestamp must be something close to what we last observed |
| * in the jitterbuffer */ |
| if (ext_rtptime > last_rtptime) { |
| /* check how far ahead it is to our RTP timestamps */ |
| diff = ext_rtptime - last_rtptime; |
| /* if bigger than 1 second, we drop it */ |
| if (jitterbuffer->priv->max_rtcp_rtp_time_diff != -1 && |
| diff > |
| gst_util_uint64_scale (jitterbuffer->priv->max_rtcp_rtp_time_diff, |
| clock_rate, 1000)) { |
| GST_DEBUG_OBJECT (jitterbuffer, "too far ahead"); |
| /* should drop this, but some RTSP servers end up with bogus |
| * way too ahead RTCP packet when repeated PAUSE/PLAY, |
| * so still trigger rptbin sync but invalidate RTCP data |
| * (sync might use other methods) */ |
| ext_rtptime = -1; |
| } |
| GST_DEBUG_OBJECT (jitterbuffer, "ext last %" G_GUINT64_FORMAT ", diff %" |
| G_GUINT64_FORMAT, last_rtptime, diff); |
| } |
| } |
| } |
| |
| if (keep) { |
| GST_DEBUG_OBJECT (jitterbuffer, "keeping RTCP packet for later"); |
| } else if (valid) { |
| GstStructure *s; |
| |
| s = gst_structure_new ("application/x-rtp-sync", |
| "base-rtptime", G_TYPE_UINT64, base_rtptime, |
| "base-time", G_TYPE_UINT64, base_time, |
| "clock-rate", G_TYPE_UINT, clock_rate, |
| "clock-base", G_TYPE_UINT64, clock_base, |
| "sr-ext-rtptime", G_TYPE_UINT64, ext_rtptime, |
| "sr-buffer", GST_TYPE_BUFFER, priv->last_sr, NULL); |
| |
| GST_DEBUG_OBJECT (jitterbuffer, "signaling sync"); |
| gst_buffer_replace (&priv->last_sr, NULL); |
| JBUF_UNLOCK (priv); |
| g_signal_emit (jitterbuffer, |
| gst_rtp_jitter_buffer_signals[SIGNAL_HANDLE_SYNC], 0, s); |
| JBUF_LOCK (priv); |
| gst_structure_free (s); |
| } else { |
| GST_DEBUG_OBJECT (jitterbuffer, "dropping RTCP packet"); |
| gst_buffer_replace (&priv->last_sr, NULL); |
| } |
| } |
| |
| static GstFlowReturn |
| gst_rtp_jitter_buffer_chain_rtcp (GstPad * pad, GstObject * parent, |
| GstBuffer * buffer) |
| { |
| GstRtpJitterBuffer *jitterbuffer; |
| GstRtpJitterBufferPrivate *priv; |
| GstFlowReturn ret = GST_FLOW_OK; |
| guint32 ssrc; |
| GstRTCPPacket packet; |
| guint64 ext_rtptime; |
| guint32 rtptime; |
| GstRTCPBuffer rtcp = { NULL, }; |
| |
| jitterbuffer = GST_RTP_JITTER_BUFFER (parent); |
| |
| if (G_UNLIKELY (!gst_rtcp_buffer_validate_reduced (buffer))) |
| goto invalid_buffer; |
| |
| priv = jitterbuffer->priv; |
| |
| gst_rtcp_buffer_map (buffer, GST_MAP_READ, &rtcp); |
| |
| if (!gst_rtcp_buffer_get_first_packet (&rtcp, &packet)) |
| goto empty_buffer; |
| |
| /* first packet must be SR or RR or else the validate would have failed */ |
| switch (gst_rtcp_packet_get_type (&packet)) { |
| case GST_RTCP_TYPE_SR: |
| gst_rtcp_packet_sr_get_sender_info (&packet, &ssrc, NULL, &rtptime, |
| NULL, NULL); |
| break; |
| default: |
| goto ignore_buffer; |
| } |
| gst_rtcp_buffer_unmap (&rtcp); |
| |
| GST_DEBUG_OBJECT (jitterbuffer, "received RTCP of SSRC %08x", ssrc); |
| |
| JBUF_LOCK (priv); |
| /* convert the RTP timestamp to our extended timestamp, using the same offset |
| * we used in the jitterbuffer */ |
| ext_rtptime = priv->jbuf->ext_rtptime; |
| ext_rtptime = gst_rtp_buffer_ext_timestamp (&ext_rtptime, rtptime); |
| |
| priv->ext_rtptime = ext_rtptime; |
| gst_buffer_replace (&priv->last_sr, buffer); |
| |
| do_handle_sync (jitterbuffer); |
| JBUF_UNLOCK (priv); |
| |
| done: |
| gst_buffer_unref (buffer); |
| |
| return ret; |
| |
| invalid_buffer: |
| { |
| /* this is not fatal but should be filtered earlier */ |
| GST_ELEMENT_WARNING (jitterbuffer, STREAM, DECODE, (NULL), |
| ("Received invalid RTCP payload, dropping")); |
| ret = GST_FLOW_OK; |
| goto done; |
| } |
| empty_buffer: |
| { |
| /* this is not fatal but should be filtered earlier */ |
| GST_ELEMENT_WARNING (jitterbuffer, STREAM, DECODE, (NULL), |
| ("Received empty RTCP payload, dropping")); |
| gst_rtcp_buffer_unmap (&rtcp); |
| ret = GST_FLOW_OK; |
| goto done; |
| } |
| ignore_buffer: |
| { |
| GST_DEBUG_OBJECT (jitterbuffer, "ignoring RTCP packet"); |
| gst_rtcp_buffer_unmap (&rtcp); |
| ret = GST_FLOW_OK; |
| goto done; |
| } |
| } |
| |
| static gboolean |
| gst_rtp_jitter_buffer_sink_query (GstPad * pad, GstObject * parent, |
| GstQuery * query) |
| { |
| gboolean res = FALSE; |
| GstRtpJitterBuffer *jitterbuffer; |
| GstRtpJitterBufferPrivate *priv; |
| |
| jitterbuffer = GST_RTP_JITTER_BUFFER (parent); |
| priv = jitterbuffer->priv; |
| |
| switch (GST_QUERY_TYPE (query)) { |
| case GST_QUERY_CAPS: |
| { |
| GstCaps *filter, *caps; |
| |
| gst_query_parse_caps (query, &filter); |
| caps = gst_rtp_jitter_buffer_getcaps (pad, filter); |
| gst_query_set_caps_result (query, caps); |
| gst_caps_unref (caps); |
| res = TRUE; |
| break; |
| } |
| default: |
| if (GST_QUERY_IS_SERIALIZED (query)) { |
| RTPJitterBufferItem *item; |
| gboolean head; |
| |
| JBUF_LOCK_CHECK (priv, out_flushing); |
| if (rtp_jitter_buffer_get_mode (priv->jbuf) != |
| RTP_JITTER_BUFFER_MODE_BUFFER) { |
| GST_DEBUG_OBJECT (jitterbuffer, "adding serialized query"); |
| item = alloc_item (query, ITEM_TYPE_QUERY, -1, -1, -1, 0, -1); |
| rtp_jitter_buffer_insert (priv->jbuf, item, &head, NULL, -1); |
| if (head) |
| JBUF_SIGNAL_EVENT (priv); |
| JBUF_WAIT_QUERY (priv, out_flushing); |
| res = priv->last_query; |
| } else { |
| GST_DEBUG_OBJECT (jitterbuffer, "refusing query, we are buffering"); |
| res = FALSE; |
| } |
| JBUF_UNLOCK (priv); |
| } else { |
| res = gst_pad_query_default (pad, parent, query); |
| } |
| break; |
| } |
| return res; |
| /* ERRORS */ |
| out_flushing: |
| { |
| GST_DEBUG_OBJECT (jitterbuffer, "we are flushing"); |
| JBUF_UNLOCK (priv); |
| return FALSE; |
| } |
| |
| } |
| |
| static gboolean |
| gst_rtp_jitter_buffer_src_query (GstPad * pad, GstObject * parent, |
| GstQuery * query) |
| { |
| GstRtpJitterBuffer *jitterbuffer; |
| GstRtpJitterBufferPrivate *priv; |
| gboolean res = FALSE; |
| |
| jitterbuffer = GST_RTP_JITTER_BUFFER (parent); |
| priv = jitterbuffer->priv; |
| |
| switch (GST_QUERY_TYPE (query)) { |
| case GST_QUERY_LATENCY: |
| { |
| /* We need to send the query upstream and add the returned latency to our |
| * own */ |
| GstClockTime min_latency, max_latency; |
| gboolean us_live; |
| GstClockTime our_latency; |
| |
| if ((res = gst_pad_peer_query (priv->sinkpad, query))) { |
| gst_query_parse_latency (query, &us_live, &min_latency, &max_latency); |
| |
| GST_DEBUG_OBJECT (jitterbuffer, "Peer latency: min %" |
| GST_TIME_FORMAT " max %" GST_TIME_FORMAT, |
| GST_TIME_ARGS (min_latency), GST_TIME_ARGS (max_latency)); |
| |
| /* store this so that we can safely sync on the peer buffers. */ |
| JBUF_LOCK (priv); |
| priv->peer_latency = min_latency; |
| our_latency = priv->latency_ns; |
| JBUF_UNLOCK (priv); |
| |
| GST_DEBUG_OBJECT (jitterbuffer, "Our latency: %" GST_TIME_FORMAT, |
| GST_TIME_ARGS (our_latency)); |
| |
| /* we add some latency but can buffer an infinite amount of time */ |
| min_latency += our_latency; |
| max_latency = -1; |
| |
| GST_DEBUG_OBJECT (jitterbuffer, "Calculated total latency : min %" |
| GST_TIME_FORMAT " max %" GST_TIME_FORMAT, |
| GST_TIME_ARGS (min_latency), GST_TIME_ARGS (max_latency)); |
| |
| gst_query_set_latency (query, TRUE, min_latency, max_latency); |
| } |
| break; |
| } |
| case GST_QUERY_POSITION: |
| { |
| GstClockTime start, last_out; |
| GstFormat fmt; |
| |
| gst_query_parse_position (query, &fmt, NULL); |
| if (fmt != GST_FORMAT_TIME) { |
| res = gst_pad_query_default (pad, parent, query); |
| break; |
| } |
| |
| JBUF_LOCK (priv); |
| start = priv->npt_start; |
| last_out = priv->last_out_time; |
| JBUF_UNLOCK (priv); |
| |
| GST_DEBUG_OBJECT (jitterbuffer, "npt start %" GST_TIME_FORMAT |
| ", last out %" GST_TIME_FORMAT, GST_TIME_ARGS (start), |
| GST_TIME_ARGS (last_out)); |
| |
| if (GST_CLOCK_TIME_IS_VALID (start) && GST_CLOCK_TIME_IS_VALID (last_out)) { |
| /* bring 0-based outgoing time to stream time */ |
| gst_query_set_position (query, GST_FORMAT_TIME, start + last_out); |
| res = TRUE; |
| } else { |
| res = gst_pad_query_default (pad, parent, query); |
| } |
| break; |
| } |
| case GST_QUERY_CAPS: |
| { |
| GstCaps *filter, *caps; |
| |
| gst_query_parse_caps (query, &filter); |
| caps = gst_rtp_jitter_buffer_getcaps (pad, filter); |
| gst_query_set_caps_result (query, caps); |
| gst_caps_unref (caps); |
| res = TRUE; |
| break; |
| } |
| default: |
| res = gst_pad_query_default (pad, parent, query); |
| break; |
| } |
| |
| return res; |
| } |
| |
| static void |
| gst_rtp_jitter_buffer_set_property (GObject * object, |
| guint prop_id, const GValue * value, GParamSpec * pspec) |
| { |
| GstRtpJitterBuffer *jitterbuffer; |
| GstRtpJitterBufferPrivate *priv; |
| |
| jitterbuffer = GST_RTP_JITTER_BUFFER (object); |
| priv = jitterbuffer->priv; |
| |
| switch (prop_id) { |
| case PROP_LATENCY: |
| { |
| guint new_latency, old_latency; |
| |
| new_latency = g_value_get_uint (value); |
| |
| JBUF_LOCK (priv); |
| old_latency = priv->latency_ms; |
| priv->latency_ms = new_latency; |
| priv->latency_ns = priv->latency_ms * GST_MSECOND; |
| rtp_jitter_buffer_set_delay (priv->jbuf, priv->latency_ns); |
| JBUF_UNLOCK (priv); |
| |
| /* post message if latency changed, this will inform the parent pipeline |
| * that a latency reconfiguration is possible/needed. */ |
| if (new_latency != old_latency) { |
| GST_DEBUG_OBJECT (jitterbuffer, "latency changed to: %" GST_TIME_FORMAT, |
| GST_TIME_ARGS (new_latency * GST_MSECOND)); |
| |
| gst_element_post_message (GST_ELEMENT_CAST (jitterbuffer), |
| gst_message_new_latency (GST_OBJECT_CAST (jitterbuffer))); |
| } |
| break; |
| } |
| case PROP_DROP_ON_LATENCY: |
| JBUF_LOCK (priv); |
| priv->drop_on_latency = g_value_get_boolean (value); |
| JBUF_UNLOCK (priv); |
| break; |
| case PROP_TS_OFFSET: |
| JBUF_LOCK (priv); |
| priv->ts_offset = g_value_get_int64 (value); |
| priv->ts_discont = TRUE; |
| JBUF_UNLOCK (priv); |
| break; |
| case PROP_DO_LOST: |
| JBUF_LOCK (priv); |
| priv->do_lost = g_value_get_boolean (value); |
| JBUF_UNLOCK (priv); |
| break; |
| case PROP_MODE: |
| JBUF_LOCK (priv); |
| rtp_jitter_buffer_set_mode (priv->jbuf, g_value_get_enum (value)); |
| JBUF_UNLOCK (priv); |
| break; |
| case PROP_DO_RETRANSMISSION: |
| JBUF_LOCK (priv); |
| priv->do_retransmission = g_value_get_boolean (value); |
| JBUF_UNLOCK (priv); |
| break; |
| case PROP_RTX_NEXT_SEQNUM: |
| JBUF_LOCK (priv); |
| priv->rtx_next_seqnum = g_value_get_boolean (value); |
| JBUF_UNLOCK (priv); |
| break; |
| case PROP_RTX_DELAY: |
| JBUF_LOCK (priv); |
| priv->rtx_delay = g_value_get_int (value); |
| JBUF_UNLOCK (priv); |
| break; |
| case PROP_RTX_MIN_DELAY: |
| JBUF_LOCK (priv); |
| priv->rtx_min_delay = g_value_get_uint (value); |
| JBUF_UNLOCK (priv); |
| break; |
| case PROP_RTX_DELAY_REORDER: |
| JBUF_LOCK (priv); |
| priv->rtx_delay_reorder = g_value_get_int (value); |
| JBUF_UNLOCK (priv); |
| break; |
| case PROP_RTX_RETRY_TIMEOUT: |
| JBUF_LOCK (priv); |
| priv->rtx_retry_timeout = g_value_get_int (value); |
| JBUF_UNLOCK (priv); |
| break; |
| case PROP_RTX_MIN_RETRY_TIMEOUT: |
| JBUF_LOCK (priv); |
| priv->rtx_min_retry_timeout = g_value_get_int (value); |
| JBUF_UNLOCK (priv); |
| break; |
| case PROP_RTX_RETRY_PERIOD: |
| JBUF_LOCK (priv); |
| priv->rtx_retry_period = g_value_get_int (value); |
| JBUF_UNLOCK (priv); |
| break; |
| case PROP_RTX_MAX_RETRIES: |
| JBUF_LOCK (priv); |
| priv->rtx_max_retries = g_value_get_int (value); |
| JBUF_UNLOCK (priv); |
| break; |
| case PROP_RTX_DEADLINE: |
| JBUF_LOCK (priv); |
| priv->rtx_deadline_ms = g_value_get_int (value); |
| JBUF_UNLOCK (priv); |
| break; |
| case PROP_RTX_STATS_TIMEOUT: |
| JBUF_LOCK (priv); |
| priv->rtx_stats_timeout = g_value_get_uint (value); |
| JBUF_UNLOCK (priv); |
| break; |
| case PROP_MAX_RTCP_RTP_TIME_DIFF: |
| JBUF_LOCK (priv); |
| priv->max_rtcp_rtp_time_diff = g_value_get_int (value); |
| JBUF_UNLOCK (priv); |
| break; |
| case PROP_MAX_DROPOUT_TIME: |
| JBUF_LOCK (priv); |
| priv->max_dropout_time = g_value_get_uint (value); |
| JBUF_UNLOCK (priv); |
| break; |
| case PROP_MAX_MISORDER_TIME: |
| JBUF_LOCK (priv); |
| priv->max_misorder_time = g_value_get_uint (value); |
| JBUF_UNLOCK (priv); |
| break; |
| case PROP_RFC7273_SYNC: |
| JBUF_LOCK (priv); |
| rtp_jitter_buffer_set_rfc7273_sync (priv->jbuf, |
| g_value_get_boolean (value)); |
| JBUF_UNLOCK (priv); |
| break; |
| default: |
| G_OBJECT_WARN_INVALID_PROPERTY_ID (object, prop_id, pspec); |
| break; |
| } |
| } |
| |
| static void |
| gst_rtp_jitter_buffer_get_property (GObject * object, |
| guint prop_id, GValue * value, GParamSpec * pspec) |
| { |
| GstRtpJitterBuffer *jitterbuffer; |
| GstRtpJitterBufferPrivate *priv; |
| |
| jitterbuffer = GST_RTP_JITTER_BUFFER (object); |
| priv = jitterbuffer->priv; |
| |
| switch (prop_id) { |
| case PROP_LATENCY: |
| JBUF_LOCK (priv); |
| g_value_set_uint (value, priv->latency_ms); |
| JBUF_UNLOCK (priv); |
| break; |
| case PROP_DROP_ON_LATENCY: |
| JBUF_LOCK (priv); |
| g_value_set_boolean (value, priv->drop_on_latency); |
| JBUF_UNLOCK (priv); |
| break; |
| case PROP_TS_OFFSET: |
| JBUF_LOCK (priv); |
| g_value_set_int64 (value, priv->ts_offset); |
| JBUF_UNLOCK (priv); |
| break; |
| case PROP_DO_LOST: |
| JBUF_LOCK (priv); |
| g_value_set_boolean (value, priv->do_lost); |
| JBUF_UNLOCK (priv); |
| break; |
| case PROP_MODE: |
| JBUF_LOCK (priv); |
| g_value_set_enum (value, rtp_jitter_buffer_get_mode (priv->jbuf)); |
| JBUF_UNLOCK (priv); |
| break; |
| case PROP_PERCENT: |
| { |
| gint percent; |
| |
| JBUF_LOCK (priv); |
| if (priv->srcresult != GST_FLOW_OK) |
| percent = 100; |
| else |
| percent = rtp_jitter_buffer_get_percent (priv->jbuf); |
| |
| g_value_set_int (value, percent); |
| JBUF_UNLOCK (priv); |
| break; |
| } |
| case PROP_DO_RETRANSMISSION: |
| JBUF_LOCK (priv); |
| g_value_set_boolean (value, priv->do_retransmission); |
| JBUF_UNLOCK (priv); |
| break; |
| case PROP_RTX_NEXT_SEQNUM: |
| JBUF_LOCK (priv); |
| g_value_set_boolean (value, priv->rtx_next_seqnum); |
| JBUF_UNLOCK (priv); |
| break; |
| case PROP_RTX_DELAY: |
| JBUF_LOCK (priv); |
| g_value_set_int (value, priv->rtx_delay); |
| JBUF_UNLOCK (priv); |
| break; |
| case PROP_RTX_MIN_DELAY: |
| JBUF_LOCK (priv); |
| g_value_set_uint (value, priv->rtx_min_delay); |
| JBUF_UNLOCK (priv); |
| break; |
| case PROP_RTX_DELAY_REORDER: |
| JBUF_LOCK (priv); |
| g_value_set_int (value, priv->rtx_delay_reorder); |
| JBUF_UNLOCK (priv); |
| break; |
| case PROP_RTX_RETRY_TIMEOUT: |
| JBUF_LOCK (priv); |
| g_value_set_int (value, priv->rtx_retry_timeout); |
| JBUF_UNLOCK (priv); |
| break; |
| case PROP_RTX_MIN_RETRY_TIMEOUT: |
| JBUF_LOCK (priv); |
| g_value_set_int (value, priv->rtx_min_retry_timeout); |
| JBUF_UNLOCK (priv); |
| break; |
| case PROP_RTX_RETRY_PERIOD: |
| JBUF_LOCK (priv); |
| g_value_set_int (value, priv->rtx_retry_period); |
| JBUF_UNLOCK (priv); |
| break; |
| case PROP_RTX_MAX_RETRIES: |
| JBUF_LOCK (priv); |
| g_value_set_int (value, priv->rtx_max_retries); |
| JBUF_UNLOCK (priv); |
| break; |
| case PROP_RTX_DEADLINE: |
| JBUF_LOCK (priv); |
| g_value_set_int (value, priv->rtx_deadline_ms); |
| JBUF_UNLOCK (priv); |
| break; |
| case PROP_RTX_STATS_TIMEOUT: |
| JBUF_LOCK (priv); |
| g_value_set_uint (value, priv->rtx_stats_timeout); |
| JBUF_UNLOCK (priv); |
| break; |
| case PROP_STATS: |
| g_value_take_boxed (value, |
| gst_rtp_jitter_buffer_create_stats (jitterbuffer)); |
| break; |
| case PROP_MAX_RTCP_RTP_TIME_DIFF: |
| JBUF_LOCK (priv); |
| g_value_set_int (value, priv->max_rtcp_rtp_time_diff); |
| JBUF_UNLOCK (priv); |
| break; |
| case PROP_MAX_DROPOUT_TIME: |
| JBUF_LOCK (priv); |
| g_value_set_uint (value, priv->max_dropout_time); |
| JBUF_UNLOCK (priv); |
| break; |
| case PROP_MAX_MISORDER_TIME: |
| JBUF_LOCK (priv); |
| g_value_set_uint (value, priv->max_misorder_time); |
| JBUF_UNLOCK (priv); |
| break; |
| case PROP_RFC7273_SYNC: |
| JBUF_LOCK (priv); |
| g_value_set_boolean (value, |
| rtp_jitter_buffer_get_rfc7273_sync (priv->jbuf)); |
| JBUF_UNLOCK (priv); |
| break; |
| default: |
| G_OBJECT_WARN_INVALID_PROPERTY_ID (object, prop_id, pspec); |
| break; |
| } |
| } |
| |
| static GstStructure * |
| gst_rtp_jitter_buffer_create_stats (GstRtpJitterBuffer * jbuf) |
| { |
| GstRtpJitterBufferPrivate *priv = jbuf->priv; |
| GstStructure *s; |
| |
| JBUF_LOCK (priv); |
| s = gst_structure_new ("application/x-rtp-jitterbuffer-stats", |
| "num-pushed", G_TYPE_UINT64, priv->num_pushed, |
| "num-lost", G_TYPE_UINT64, priv->num_lost, |
| "num-late", G_TYPE_UINT64, priv->num_late, |
| "num-duplicates", G_TYPE_UINT64, priv->num_duplicates, |
| "avg-jitter", G_TYPE_UINT64, priv->avg_jitter, |
| "rtx-count", G_TYPE_UINT64, priv->num_rtx_requests, |
| "rtx-success-count", G_TYPE_UINT64, priv->num_rtx_success, |
| "rtx-per-packet", G_TYPE_DOUBLE, priv->avg_rtx_num, |
| "rtx-rtt", G_TYPE_UINT64, priv->avg_rtx_rtt, NULL); |
| JBUF_UNLOCK (priv); |
| |
| return s; |
| } |