| /* GStreamer |
| * |
| * Copyright (C) <2015> Centricular Ltd |
| * @author: Edward Hervey <edward@centricular.com> |
| * @author: Jan Schmidt <jan@centricular.com> |
| * |
| * This library is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU Library General Public |
| * License as published by the Free Software Foundation; either |
| * version 2 of the License, or (at your option) any later version. |
| * |
| * This library is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * Library General Public License for more details. |
| * |
| * You should have received a copy of the GNU Library General Public |
| * License along with this library; if not, write to the |
| * Free Software Foundation, Inc., 51 Franklin St, Fifth Floor, |
| * Boston, MA 02110-1301, USA. |
| */ |
| |
| #ifdef HAVE_CONFIG_H |
| #include "config.h" |
| #endif |
| |
| #include <glib.h> |
| #include <glib-object.h> |
| #include <glib/gprintf.h> |
| #include <gst/gst.h> |
| #include <gst/pbutils/pbutils.h> |
| |
| #include "gstplayback.h" |
| #include "gstplay-enum.h" |
| #include "gstrawcaps.h" |
| |
| /** |
| * SECTION:element-decodebin3 |
| * @title: decodebin3 |
| * |
| * #GstBin that auto-magically constructs a decoding pipeline using available |
| * decoders and demuxers via auto-plugging. The output is raw audio, video |
| * or subtitle streams. |
| * |
| * decodebin3 differs from the previous decodebin (decodebin2) in important ways: |
| * |
| * * supports publication and selection of stream information via |
| * GstStreamCollection messages and #GST_EVENT_SELECT_STREAM events. |
| * |
| * * dynamically switches stream connections internally, and |
| * reuses decoder elements when stream selections change, so that in |
| * the normal case it maintains 1 decoder of each type (video/audio/subtitle) |
| * and only creates new elements when streams change and an existing decoder |
| * is not capable of handling the new format. |
| * |
| * * supports multiple input pads for the parallel decoding of auxilliary streams |
| * not muxed with the primary stream. |
| * |
| * * does not handle network stream buffering. decodebin3 expects that network stream |
| * buffering is handled upstream, before data is passed to it. |
| * |
| * <emphasis>decodebin3 is still experimental API and a technology preview. |
| * Its behaviour and exposed API is subject to change.</emphasis> |
| * |
| */ |
| |
| /** |
| * Global design |
| * |
| * 1) From sink pad to elementary streams (GstParseBin) |
| * |
| * The input sink pads are fed to GstParseBin. GstParseBin will feed them |
| * through typefind. When the caps are detected (or changed) we recursively |
| * figure out which demuxer, parser or depayloader is needed until we get to |
| * elementary streams. |
| * |
| * All elementary streams (whether decoded or not, whether exposed or not) are |
| * fed through multiqueue. There is only *one* multiqueue in decodebin3. |
| * |
| * => MultiQueue is the cornerstone. |
| * => No buffering before multiqueue |
| * |
| * 2) Elementary streams |
| * |
| * After GstParseBin, there are 3 main components: |
| * 1) Input Streams (provided by GstParseBin) |
| * 2) Multiqueue slots |
| * 3) Output Streams |
| * |
| * Input Streams correspond to the stream coming from GstParseBin and that gets |
| * fed into a multiqueue slot. |
| * |
| * Output Streams correspond to the combination of a (optional) decoder and an |
| * output ghostpad. Output Streams can be moved from one multiqueue slot to |
| * another, can reconfigure itself (different decoders), and can be |
| * added/removed depending on the configuration (all streams outputted, only one |
| * of each type, ...). |
| * |
| * Multiqueue slots correspond to a pair of sink/src pad from multiqueue. For |
| * each 'active' Input Stream there is a corresponding slot. |
| * Slots might have different streams on input and output (due to internal |
| * buffering). |
| * |
| * Due to internal queuing/buffering/..., all those components (might) behave |
| * asynchronously. Therefore probes will be used on each component source pad to |
| * detect various key-points: |
| * * EOS : |
| * the stream is done => Mark that component as done, optionally freeing/removing it |
| * * STREAM_START : |
| * a new stream is starting => link it further if needed |
| * |
| * 3) Gradual replacement |
| * |
| * If the caps change at any point in decodebin (input sink pad, demuxer output, |
| * multiqueue output, ..), we gradually replace (if needed) the following elements. |
| * |
| * This is handled by the probes in various locations: |
| * a) typefind output |
| * b) multiqueue input (source pad of Input Streams) |
| * c) multiqueue output (source pad of Multiqueue Slots) |
| * d) final output (target of source ghostpads) |
| * |
| * When CAPS event arrive at those points, one of three things can happen: |
| * a) There is no elements downstream yet, just create/link-to following elements |
| * b) There are downstream elements, do a ACCEPT_CAPS query |
| * b.1) The new CAPS are accepted, keep current configuration |
| * b.2) The new CAPS are not accepted, remove following elements then do a) |
| * |
| * Components: |
| * |
| * MultiQ Output |
| * Input(s) Slots Streams |
| * /-------------------------------------------\ /-----\ /------------- \ |
| * |
| * +-------------------------------------------------------------------------+ |
| * | | |
| * | +---------------------------------------------+ | |
| * | | GstParseBin(s) | | |
| * | | +--------------+ | +-----+ | |
| * | | | |---[parser]-[|--| Mul |---[ decoder ]-[| |
| * |]--[ typefind ]---| demuxer(s) |------------[| | ti | | |
| * | | | (if needed) |---[parser]-[|--| qu | | |
| * | | | |---[parser]-[|--| eu |---[ decoder ]-[| |
| * | | +--------------+ | +------ ^ | |
| * | +---------------------------------------------+ ^ | | |
| * | ^ | | | |
| * +-----------------------------------------------+--------+-------------+--+ |
| * | | | |
| * | | | |
| * Probes --/--------/-------------/ |
| * |
| * ATOMIC SWITCHING |
| * |
| * We want to ensure we re-use decoders when switching streams. This takes place |
| * at the multiqueue output level. |
| * |
| * MAIN CONCEPTS |
| * 1) Activating a stream (i.e. linking a slot to an output) is only done within |
| * the streaming thread in the multiqueue_src_probe() and only if the |
| stream is in the REQUESTED selection. |
| * 2) Deactivating a stream (i.e. unlinking a slot from an output) is also done |
| * within the stream thread, but only in a purposefully called IDLE probe |
| * that calls reassign_slot(). |
| * |
| * Based on those two principles, 3 "selection" of streams (stream-id) are used: |
| * 1) requested_selection |
| * All streams within that list should be activated |
| * 2) active_selection |
| * List of streams that are exposed by decodebin |
| * 3) to_activate |
| * List of streams that will be moved to requested_selection in the |
| * reassign_slot() method (i.e. once a stream was deactivated, and the output |
| * was retargetted) |
| */ |
| |
| |
| GST_DEBUG_CATEGORY_STATIC (decodebin3_debug); |
| #define GST_CAT_DEFAULT decodebin3_debug |
| |
| #define GST_TYPE_DECODEBIN3 (gst_decodebin3_get_type ()) |
| |
| #define EXTRA_DEBUG 1 |
| |
| typedef struct _GstDecodebin3 GstDecodebin3; |
| typedef struct _GstDecodebin3Class GstDecodebin3Class; |
| |
| typedef struct _DecodebinInputStream DecodebinInputStream; |
| typedef struct _DecodebinInput DecodebinInput; |
| typedef struct _DecodebinOutputStream DecodebinOutputStream; |
| |
| struct _GstDecodebin3 |
| { |
| GstBin bin; |
| |
| /* input_lock protects the following variables */ |
| GMutex input_lock; |
| /* Main input (static sink pad) */ |
| DecodebinInput *main_input; |
| /* Supplementary input (request sink pads) */ |
| GList *other_inputs; |
| /* counter for input */ |
| guint32 input_counter; |
| /* Current stream group_id (default : GST_GROUP_ID_INVALID) */ |
| /* FIXME : Needs to be resetted appropriately (when upstream changes ?) */ |
| guint32 current_group_id; |
| /* End of variables protected by input_lock */ |
| |
| GstElement *multiqueue; |
| |
| /* selection_lock protects access to following variables */ |
| GMutex selection_lock; |
| GList *input_streams; /* List of DecodebinInputStream for active collection */ |
| GList *output_streams; /* List of DecodebinOutputStream used for output */ |
| GList *slots; /* List of MultiQueueSlot */ |
| guint slot_id; |
| |
| /* Active collection */ |
| GstStreamCollection *collection; |
| /* requested selection of stream-id to activate post-multiqueue */ |
| GList *requested_selection; |
| /* list of stream-id currently activated in output */ |
| GList *active_selection; |
| /* List of stream-id that need to be activated (after a stream switch for ex) */ |
| GList *to_activate; |
| /* Pending select streams event */ |
| guint32 select_streams_seqnum; |
| /* pending list of streams to select (from downstream) */ |
| GList *pending_select_streams; |
| /* TRUE if requested_selection was updated, will become FALSE once |
| * it has fully transitioned to active */ |
| gboolean selection_updated; |
| /* End of variables protected by selection_lock */ |
| |
| /* List of pending collections. |
| * FIXME : Is this really needed ? */ |
| GList *pending_collection; |
| |
| /* Factories */ |
| GMutex factories_lock; |
| guint32 factories_cookie; |
| /* All DECODABLE factories */ |
| GList *factories; |
| /* Only DECODER factories */ |
| GList *decoder_factories; |
| /* DECODABLE but not DECODER factories */ |
| GList *decodable_factories; |
| |
| /* counters for pads */ |
| guint32 apadcount, vpadcount, tpadcount, opadcount; |
| |
| /* Properties */ |
| GstCaps *caps; |
| }; |
| |
| struct _GstDecodebin3Class |
| { |
| GstBinClass class; |
| |
| gint (*select_stream) (GstDecodebin3 * dbin, |
| GstStreamCollection * collection, GstStream * stream); |
| }; |
| |
| /* Input of decodebin, controls input pad and parsebin */ |
| struct _DecodebinInput |
| { |
| GstDecodebin3 *dbin; |
| |
| gboolean is_main; |
| |
| GstPad *ghost_sink; |
| GstPad *parsebin_sink; |
| |
| GstStreamCollection *collection; /* Active collection */ |
| |
| guint group_id; |
| |
| GstElement *parsebin; |
| |
| gulong pad_added_sigid; |
| gulong pad_removed_sigid; |
| gulong drained_sigid; |
| |
| /* TRUE if the input got drained |
| * FIXME : When do we reset it if re-used ? |
| */ |
| gboolean drained; |
| |
| /* HACK : Remove these fields */ |
| /* List of PendingPad structures */ |
| GList *pending_pads; |
| }; |
| |
| /* Multiqueue Slots */ |
| typedef struct _MultiQueueSlot |
| { |
| guint id; |
| |
| GstDecodebin3 *dbin; |
| /* Type of stream handled by this slot */ |
| GstStreamType type; |
| |
| /* Linked input and output */ |
| DecodebinInputStream *input; |
| |
| /* pending => last stream received on sink pad */ |
| GstStream *pending_stream; |
| /* active => last stream outputted on source pad */ |
| GstStream *active_stream; |
| |
| GstPad *sink_pad, *src_pad; |
| |
| /* id of the MQ src_pad event probe */ |
| gulong probe_id; |
| |
| gboolean is_drained; |
| |
| DecodebinOutputStream *output; |
| } MultiQueueSlot; |
| |
| /* Streams that are exposed downstream (i.e. output) */ |
| struct _DecodebinOutputStream |
| { |
| GstDecodebin3 *dbin; |
| /* The type of stream handled by this output stream */ |
| GstStreamType type; |
| |
| /* The slot to which this output stream is currently connected to */ |
| MultiQueueSlot *slot; |
| |
| GstElement *decoder; /* Optional */ |
| GstPad *decoder_sink, *decoder_src; |
| gboolean linked; |
| |
| /* ghostpad */ |
| GstPad *src_pad; |
| /* Flag if ghost pad is exposed */ |
| gboolean src_exposed; |
| |
| /* keyframe dropping probe */ |
| gulong drop_probe_id; |
| }; |
| |
| /* Pending pads from parsebin */ |
| typedef struct _PendingPad |
| { |
| GstDecodebin3 *dbin; |
| DecodebinInput *input; |
| GstPad *pad; |
| |
| gulong buffer_probe; |
| gulong event_probe; |
| gboolean saw_eos; |
| } PendingPad; |
| |
| /* properties */ |
| enum |
| { |
| PROP_0, |
| PROP_CAPS |
| }; |
| |
| /* signals */ |
| enum |
| { |
| SIGNAL_SELECT_STREAM, |
| SIGNAL_ABOUT_TO_FINISH, |
| LAST_SIGNAL |
| }; |
| static guint gst_decodebin3_signals[LAST_SIGNAL] = { 0 }; |
| |
| #define SELECTION_LOCK(dbin) G_STMT_START { \ |
| GST_LOG_OBJECT (dbin, \ |
| "selection locking from thread %p", \ |
| g_thread_self ()); \ |
| g_mutex_lock (&dbin->selection_lock); \ |
| GST_LOG_OBJECT (dbin, \ |
| "selection locked from thread %p", \ |
| g_thread_self ()); \ |
| } G_STMT_END |
| |
| #define SELECTION_UNLOCK(dbin) G_STMT_START { \ |
| GST_LOG_OBJECT (dbin, \ |
| "selection unlocking from thread %p", \ |
| g_thread_self ()); \ |
| g_mutex_unlock (&dbin->selection_lock); \ |
| } G_STMT_END |
| |
| #define INPUT_LOCK(dbin) G_STMT_START { \ |
| GST_LOG_OBJECT (dbin, \ |
| "input locking from thread %p", \ |
| g_thread_self ()); \ |
| g_mutex_lock (&dbin->input_lock); \ |
| GST_LOG_OBJECT (dbin, \ |
| "input locked from thread %p", \ |
| g_thread_self ()); \ |
| } G_STMT_END |
| |
| #define INPUT_UNLOCK(dbin) G_STMT_START { \ |
| GST_LOG_OBJECT (dbin, \ |
| "input unlocking from thread %p", \ |
| g_thread_self ()); \ |
| g_mutex_unlock (&dbin->input_lock); \ |
| } G_STMT_END |
| |
| GType gst_decodebin3_get_type (void); |
| #define gst_decodebin3_parent_class parent_class |
| G_DEFINE_TYPE (GstDecodebin3, gst_decodebin3, GST_TYPE_BIN); |
| |
| static GstStaticCaps default_raw_caps = GST_STATIC_CAPS (DEFAULT_RAW_CAPS); |
| |
| static GstStaticPadTemplate sink_template = GST_STATIC_PAD_TEMPLATE ("sink", |
| GST_PAD_SINK, |
| GST_PAD_ALWAYS, |
| GST_STATIC_CAPS_ANY); |
| |
| static GstStaticPadTemplate request_sink_template = |
| GST_STATIC_PAD_TEMPLATE ("sink_%u", |
| GST_PAD_SINK, |
| GST_PAD_REQUEST, |
| GST_STATIC_CAPS_ANY); |
| |
| static GstStaticPadTemplate video_src_template = |
| GST_STATIC_PAD_TEMPLATE ("video_%u", |
| GST_PAD_SRC, |
| GST_PAD_SOMETIMES, |
| GST_STATIC_CAPS_ANY); |
| |
| static GstStaticPadTemplate audio_src_template = |
| GST_STATIC_PAD_TEMPLATE ("audio_%u", |
| GST_PAD_SRC, |
| GST_PAD_SOMETIMES, |
| GST_STATIC_CAPS_ANY); |
| |
| static GstStaticPadTemplate text_src_template = |
| GST_STATIC_PAD_TEMPLATE ("text_%u", |
| GST_PAD_SRC, |
| GST_PAD_SOMETIMES, |
| GST_STATIC_CAPS_ANY); |
| |
| static GstStaticPadTemplate src_template = GST_STATIC_PAD_TEMPLATE ("src_%u", |
| GST_PAD_SRC, |
| GST_PAD_SOMETIMES, |
| GST_STATIC_CAPS_ANY); |
| |
| |
| static void gst_decodebin3_dispose (GObject * object); |
| static void gst_decodebin3_set_property (GObject * object, guint prop_id, |
| const GValue * value, GParamSpec * pspec); |
| static void gst_decodebin3_get_property (GObject * object, guint prop_id, |
| GValue * value, GParamSpec * pspec); |
| |
| static gboolean parsebin_autoplug_continue_cb (GstElement * |
| parsebin, GstPad * pad, GstCaps * caps, GstDecodebin3 * dbin); |
| |
| static gint |
| gst_decodebin3_select_stream (GstDecodebin3 * dbin, |
| GstStreamCollection * collection, GstStream * stream) |
| { |
| GST_LOG_OBJECT (dbin, "default select-stream, returning -1"); |
| |
| return -1; |
| } |
| |
| static GstPad *gst_decodebin3_request_new_pad (GstElement * element, |
| GstPadTemplate * temp, const gchar * name, const GstCaps * caps); |
| static void gst_decodebin3_handle_message (GstBin * bin, GstMessage * message); |
| static GstStateChangeReturn gst_decodebin3_change_state (GstElement * element, |
| GstStateChange transition); |
| static gboolean gst_decodebin3_send_event (GstElement * element, |
| GstEvent * event); |
| |
| static void gst_decode_bin_update_factories_list (GstDecodebin3 * dbin); |
| #if 0 |
| static gboolean have_factory (GstDecodebin3 * dbin, GstCaps * caps, |
| GstElementFactoryListType ftype); |
| #endif |
| |
| static void free_input (GstDecodebin3 * dbin, DecodebinInput * input); |
| static void free_input_async (GstDecodebin3 * dbin, DecodebinInput * input); |
| static DecodebinInput *create_new_input (GstDecodebin3 * dbin, gboolean main); |
| static gboolean set_input_group_id (DecodebinInput * input, guint32 * group_id); |
| |
| static void reconfigure_output_stream (DecodebinOutputStream * output, |
| MultiQueueSlot * slot); |
| static void free_output_stream (GstDecodebin3 * dbin, |
| DecodebinOutputStream * output); |
| static DecodebinOutputStream *create_output_stream (GstDecodebin3 * dbin, |
| GstStreamType type); |
| |
| static GstPadProbeReturn slot_unassign_probe (GstPad * pad, |
| GstPadProbeInfo * info, MultiQueueSlot * slot); |
| static gboolean reassign_slot (GstDecodebin3 * dbin, MultiQueueSlot * slot); |
| static MultiQueueSlot *get_slot_for_input (GstDecodebin3 * dbin, |
| DecodebinInputStream * input); |
| static void link_input_to_slot (DecodebinInputStream * input, |
| MultiQueueSlot * slot); |
| static void free_multiqueue_slot (GstDecodebin3 * dbin, MultiQueueSlot * slot); |
| static void free_multiqueue_slot_async (GstDecodebin3 * dbin, |
| MultiQueueSlot * slot); |
| |
| static GstStreamCollection *get_merged_collection (GstDecodebin3 * dbin); |
| static void update_requested_selection (GstDecodebin3 * dbin); |
| |
| /* FIXME: Really make all the parser stuff a self-contained helper object */ |
| #include "gstdecodebin3-parse.c" |
| |
| static gboolean |
| _gst_int_accumulator (GSignalInvocationHint * ihint, |
| GValue * return_accu, const GValue * handler_return, gpointer dummy) |
| { |
| gint res = g_value_get_int (handler_return); |
| |
| if (!(ihint->run_type & G_SIGNAL_RUN_CLEANUP)) |
| g_value_set_int (return_accu, res); |
| |
| if (res == -1) |
| return TRUE; |
| |
| return FALSE; |
| } |
| |
| static void |
| gst_decodebin3_class_init (GstDecodebin3Class * klass) |
| { |
| GObjectClass *gobject_klass = (GObjectClass *) klass; |
| GstElementClass *element_class = (GstElementClass *) klass; |
| GstBinClass *bin_klass = (GstBinClass *) klass; |
| |
| gobject_klass->dispose = gst_decodebin3_dispose; |
| gobject_klass->set_property = gst_decodebin3_set_property; |
| gobject_klass->get_property = gst_decodebin3_get_property; |
| |
| /* FIXME : ADD PROPERTIES ! */ |
| g_object_class_install_property (gobject_klass, PROP_CAPS, |
| g_param_spec_boxed ("caps", "Caps", |
| "The caps on which to stop decoding. (NULL = default)", |
| GST_TYPE_CAPS, G_PARAM_READWRITE | G_PARAM_STATIC_STRINGS)); |
| |
| /* FIXME : ADD SIGNALS ! */ |
| /** |
| * GstDecodebin3::select-stream |
| * @decodebin: a #GstDecodebin3 |
| * @collection: a #GstStreamCollection |
| * @stream: a #GstStream |
| * |
| * This signal is emitted whenever @decodebin needs to decide whether |
| * to expose a @stream of a given @collection. |
| * |
| * Returns: 1 if the stream should be selected, 0 if it shouldn't be selected. |
| * A value of -1 (default) lets @decodebin decide what to do with the stream. |
| * */ |
| gst_decodebin3_signals[SIGNAL_SELECT_STREAM] = |
| g_signal_new ("select-stream", G_TYPE_FROM_CLASS (klass), |
| G_SIGNAL_RUN_LAST, G_STRUCT_OFFSET (GstDecodebin3Class, select_stream), |
| _gst_int_accumulator, NULL, g_cclosure_marshal_generic, |
| G_TYPE_INT, 2, GST_TYPE_STREAM_COLLECTION, GST_TYPE_STREAM); |
| |
| /** |
| * GstDecodebin3::about-to-finish: |
| * |
| * This signal is emitted when the data for the selected URI is |
| * entirely buffered and it is safe to specify anothe URI. |
| */ |
| gst_decodebin3_signals[SIGNAL_ABOUT_TO_FINISH] = |
| g_signal_new ("about-to-finish", G_TYPE_FROM_CLASS (klass), |
| G_SIGNAL_RUN_LAST, 0, NULL, NULL, g_cclosure_marshal_generic, G_TYPE_NONE, |
| 0, G_TYPE_NONE); |
| |
| |
| element_class->request_new_pad = |
| GST_DEBUG_FUNCPTR (gst_decodebin3_request_new_pad); |
| element_class->change_state = GST_DEBUG_FUNCPTR (gst_decodebin3_change_state); |
| element_class->send_event = GST_DEBUG_FUNCPTR (gst_decodebin3_send_event); |
| |
| gst_element_class_add_pad_template (element_class, |
| gst_static_pad_template_get (&sink_template)); |
| gst_element_class_add_pad_template (element_class, |
| gst_static_pad_template_get (&request_sink_template)); |
| gst_element_class_add_pad_template (element_class, |
| gst_static_pad_template_get (&video_src_template)); |
| gst_element_class_add_pad_template (element_class, |
| gst_static_pad_template_get (&audio_src_template)); |
| gst_element_class_add_pad_template (element_class, |
| gst_static_pad_template_get (&text_src_template)); |
| gst_element_class_add_pad_template (element_class, |
| gst_static_pad_template_get (&src_template)); |
| |
| gst_element_class_set_static_metadata (element_class, |
| "Decoder Bin 3", "Generic/Bin/Decoder", |
| "Autoplug and decode to raw media", |
| "Edward Hervey <edward@centricular.com>"); |
| |
| bin_klass->handle_message = gst_decodebin3_handle_message; |
| |
| klass->select_stream = gst_decodebin3_select_stream; |
| } |
| |
| static void |
| gst_decodebin3_init (GstDecodebin3 * dbin) |
| { |
| /* Create main input */ |
| dbin->main_input = create_new_input (dbin, TRUE); |
| |
| dbin->multiqueue = gst_element_factory_make ("multiqueue", NULL); |
| g_object_set (dbin->multiqueue, "sync-by-running-time", TRUE, |
| "max-size-buffers", 0, "use-interleave", TRUE, NULL); |
| gst_bin_add ((GstBin *) dbin, dbin->multiqueue); |
| |
| dbin->current_group_id = GST_GROUP_ID_INVALID; |
| |
| g_mutex_init (&dbin->factories_lock); |
| g_mutex_init (&dbin->selection_lock); |
| g_mutex_init (&dbin->input_lock); |
| |
| dbin->caps = gst_static_caps_get (&default_raw_caps); |
| |
| GST_OBJECT_FLAG_SET (dbin, GST_BIN_FLAG_STREAMS_AWARE); |
| } |
| |
| static void |
| gst_decodebin3_dispose (GObject * object) |
| { |
| GstDecodebin3 *dbin = (GstDecodebin3 *) object; |
| GList *walk, *next; |
| |
| if (dbin->factories) |
| gst_plugin_feature_list_free (dbin->factories); |
| if (dbin->decoder_factories) |
| g_list_free (dbin->decoder_factories); |
| if (dbin->decodable_factories) |
| g_list_free (dbin->decodable_factories); |
| g_list_free_full (dbin->requested_selection, g_free); |
| g_list_free (dbin->active_selection); |
| g_list_free (dbin->to_activate); |
| g_list_free (dbin->pending_select_streams); |
| g_clear_object (&dbin->collection); |
| |
| free_input (dbin, dbin->main_input); |
| |
| for (walk = dbin->other_inputs; walk; walk = next) { |
| DecodebinInput *input = walk->data; |
| |
| next = g_list_next (walk); |
| |
| free_input (dbin, input); |
| dbin->other_inputs = g_list_delete_link (dbin->other_inputs, walk); |
| } |
| |
| G_OBJECT_CLASS (parent_class)->dispose (object); |
| } |
| |
| static void |
| gst_decodebin3_set_property (GObject * object, guint prop_id, |
| const GValue * value, GParamSpec * pspec) |
| { |
| GstDecodebin3 *dbin = (GstDecodebin3 *) object; |
| |
| /* FIXME : IMPLEMENT */ |
| switch (prop_id) { |
| case PROP_CAPS: |
| GST_OBJECT_LOCK (dbin); |
| if (dbin->caps) |
| gst_caps_unref (dbin->caps); |
| dbin->caps = g_value_dup_boxed (value); |
| GST_OBJECT_UNLOCK (dbin); |
| break; |
| default: |
| G_OBJECT_WARN_INVALID_PROPERTY_ID (object, prop_id, pspec); |
| break; |
| } |
| } |
| |
| static void |
| gst_decodebin3_get_property (GObject * object, guint prop_id, GValue * value, |
| GParamSpec * pspec) |
| { |
| GstDecodebin3 *dbin = (GstDecodebin3 *) object; |
| |
| /* FIXME : IMPLEMENT */ |
| switch (prop_id) { |
| case PROP_CAPS: |
| GST_OBJECT_LOCK (dbin); |
| g_value_set_boxed (value, dbin->caps); |
| GST_OBJECT_UNLOCK (dbin); |
| break; |
| default: |
| G_OBJECT_WARN_INVALID_PROPERTY_ID (object, prop_id, pspec); |
| break; |
| } |
| } |
| |
| static gboolean |
| parsebin_autoplug_continue_cb (GstElement * parsebin, GstPad * pad, |
| GstCaps * caps, GstDecodebin3 * dbin) |
| { |
| GST_DEBUG_OBJECT (pad, "caps %" GST_PTR_FORMAT, caps); |
| |
| /* If it matches our target caps, expose it */ |
| if (gst_caps_can_intersect (caps, dbin->caps)) |
| return FALSE; |
| |
| return TRUE; |
| } |
| |
| /* This method should be called whenever a STREAM_START event |
| * comes out of a given parsebin. |
| * The caller shall replace the group_id if the function returns TRUE */ |
| static gboolean |
| set_input_group_id (DecodebinInput * input, guint32 * group_id) |
| { |
| GstDecodebin3 *dbin = input->dbin; |
| |
| if (input->group_id != *group_id) { |
| if (input->group_id != GST_GROUP_ID_INVALID) |
| GST_WARNING_OBJECT (dbin, |
| "Group id changed (%" G_GUINT32_FORMAT " -> %" G_GUINT32_FORMAT |
| ") on input %p ", input->group_id, *group_id, input); |
| input->group_id = *group_id; |
| } |
| |
| if (*group_id != dbin->current_group_id) { |
| if (dbin->current_group_id == GST_GROUP_ID_INVALID) { |
| GST_DEBUG_OBJECT (dbin, "Setting current group id to %" G_GUINT32_FORMAT, |
| *group_id); |
| dbin->current_group_id = *group_id; |
| } |
| *group_id = dbin->current_group_id; |
| return TRUE; |
| } |
| |
| return FALSE; |
| } |
| |
| static void |
| parsebin_drained_cb (GstElement * parsebin, DecodebinInput * input) |
| { |
| GstDecodebin3 *dbin = input->dbin; |
| gboolean all_drained; |
| GList *tmp; |
| |
| GST_WARNING_OBJECT (dbin, "input %p drained", input); |
| input->drained = TRUE; |
| |
| all_drained = dbin->main_input->drained; |
| for (tmp = dbin->other_inputs; tmp; tmp = tmp->next) { |
| DecodebinInput *data = (DecodebinInput *) tmp->data; |
| |
| all_drained &= data->drained; |
| } |
| |
| if (all_drained) { |
| GST_WARNING_OBJECT (dbin, "All inputs drained. Posting about-to-finish"); |
| g_signal_emit (dbin, gst_decodebin3_signals[SIGNAL_ABOUT_TO_FINISH], 0, |
| NULL); |
| } |
| } |
| |
| /* Call with INPUT_LOCK taken */ |
| static gboolean |
| ensure_input_parsebin (GstDecodebin3 * dbin, DecodebinInput * input) |
| { |
| gboolean set_state = FALSE; |
| |
| if (input->parsebin == NULL) { |
| input->parsebin = gst_element_factory_make ("parsebin", NULL); |
| if (input->parsebin == NULL) |
| goto no_parsebin; |
| input->parsebin = gst_object_ref (input->parsebin); |
| input->parsebin_sink = gst_element_get_static_pad (input->parsebin, "sink"); |
| input->pad_added_sigid = |
| g_signal_connect (input->parsebin, "pad-added", |
| (GCallback) parsebin_pad_added_cb, input); |
| input->pad_removed_sigid = |
| g_signal_connect (input->parsebin, "pad-removed", |
| (GCallback) parsebin_pad_removed_cb, input); |
| input->drained_sigid = |
| g_signal_connect (input->parsebin, "drained", |
| (GCallback) parsebin_drained_cb, input); |
| g_signal_connect (input->parsebin, "autoplug-continue", |
| (GCallback) parsebin_autoplug_continue_cb, dbin); |
| } |
| |
| if (GST_OBJECT_PARENT (GST_OBJECT (input->parsebin)) != GST_OBJECT (dbin)) { |
| gst_bin_add (GST_BIN (dbin), input->parsebin); |
| set_state = TRUE; |
| } |
| |
| gst_ghost_pad_set_target (GST_GHOST_PAD (input->ghost_sink), |
| input->parsebin_sink); |
| if (set_state) |
| gst_element_sync_state_with_parent (input->parsebin); |
| |
| return TRUE; |
| |
| /* ERRORS */ |
| no_parsebin: |
| { |
| gst_element_post_message ((GstElement *) dbin, |
| gst_missing_element_message_new ((GstElement *) dbin, "parsebin")); |
| return FALSE; |
| } |
| } |
| |
| static GstPadLinkReturn |
| gst_decodebin3_input_pad_link (GstPad * pad, GstObject * parent, GstPad * peer) |
| { |
| GstDecodebin3 *dbin = (GstDecodebin3 *) parent; |
| GstPadLinkReturn res = GST_PAD_LINK_OK; |
| DecodebinInput *input; |
| |
| GST_LOG_OBJECT (parent, "Got link on input pad %" GST_PTR_FORMAT |
| ". Creating parsebin if needed", pad); |
| |
| if ((input = g_object_get_data (G_OBJECT (pad), "decodebin.input")) == NULL) |
| goto fail; |
| |
| INPUT_LOCK (dbin); |
| if (!ensure_input_parsebin (dbin, input)) |
| res = GST_PAD_LINK_REFUSED; |
| INPUT_UNLOCK (dbin); |
| |
| return res; |
| fail: |
| GST_ERROR_OBJECT (parent, "Failed to retrieve input state from ghost pad"); |
| return GST_PAD_LINK_REFUSED; |
| } |
| |
| /* Drop duration query during _input_pad_unlink */ |
| static GstPadProbeReturn |
| query_duration_drop_probe (GstPad * pad, GstPadProbeInfo * info, |
| DecodebinInput * input) |
| { |
| GstPadProbeReturn ret = GST_PAD_PROBE_OK; |
| |
| if (GST_IS_QUERY (GST_PAD_PROBE_INFO_DATA (info))) { |
| GstQuery *query = GST_PAD_PROBE_INFO_QUERY (info); |
| if (GST_QUERY_TYPE (query) == GST_QUERY_DURATION) { |
| GST_LOG_OBJECT (pad, "stop forwarding query duration"); |
| ret = GST_PAD_PROBE_HANDLED; |
| } |
| } |
| |
| return ret; |
| } |
| |
| static void |
| gst_decodebin3_input_pad_unlink (GstPad * pad, GstObject * parent) |
| { |
| GstDecodebin3 *dbin = (GstDecodebin3 *) parent; |
| DecodebinInput *input; |
| |
| GST_LOG_OBJECT (parent, "Got unlink on input pad %" GST_PTR_FORMAT |
| ". Removing parsebin.", pad); |
| |
| if ((input = g_object_get_data (G_OBJECT (pad), "decodebin.input")) == NULL) |
| goto fail; |
| |
| INPUT_LOCK (dbin); |
| if (input->parsebin == NULL) { |
| INPUT_UNLOCK (dbin); |
| return; |
| } |
| |
| if (GST_OBJECT_PARENT (GST_OBJECT (input->parsebin)) == GST_OBJECT (dbin)) { |
| GstStreamCollection *collection = NULL; |
| gulong probe_id = gst_pad_add_probe (input->parsebin_sink, |
| GST_PAD_PROBE_TYPE_QUERY_UPSTREAM, |
| (GstPadProbeCallback) query_duration_drop_probe, input, NULL); |
| |
| /* Clear stream-collection corresponding to current INPUT and post new |
| * stream-collection message, if needed */ |
| if (input->collection) { |
| gst_object_unref (input->collection); |
| input->collection = NULL; |
| } |
| |
| SELECTION_LOCK (dbin); |
| collection = get_merged_collection (dbin); |
| if (collection && collection != dbin->collection) { |
| GstMessage *msg; |
| GST_DEBUG_OBJECT (dbin, "Update Stream Collection"); |
| |
| if (dbin->collection) |
| gst_object_unref (dbin->collection); |
| dbin->collection = collection; |
| |
| msg = |
| gst_message_new_stream_collection ((GstObject *) dbin, |
| dbin->collection); |
| |
| SELECTION_UNLOCK (dbin); |
| gst_element_post_message (GST_ELEMENT_CAST (dbin), msg); |
| update_requested_selection (dbin); |
| } else |
| SELECTION_UNLOCK (dbin); |
| |
| gst_bin_remove (GST_BIN (dbin), input->parsebin); |
| gst_element_set_state (input->parsebin, GST_STATE_NULL); |
| g_signal_handler_disconnect (input->parsebin, input->pad_removed_sigid); |
| g_signal_handler_disconnect (input->parsebin, input->pad_added_sigid); |
| g_signal_handler_disconnect (input->parsebin, input->drained_sigid); |
| gst_pad_remove_probe (input->parsebin_sink, probe_id); |
| gst_object_unref (input->parsebin); |
| gst_object_unref (input->parsebin_sink); |
| |
| input->parsebin = NULL; |
| input->parsebin_sink = NULL; |
| |
| if (!input->is_main) { |
| dbin->other_inputs = g_list_remove (dbin->other_inputs, input); |
| free_input_async (dbin, input); |
| } |
| } |
| INPUT_UNLOCK (dbin); |
| return; |
| |
| fail: |
| GST_ERROR_OBJECT (parent, "Failed to retrieve input state from ghost pad"); |
| return; |
| } |
| |
| static void |
| free_input (GstDecodebin3 * dbin, DecodebinInput * input) |
| { |
| GST_DEBUG ("Freeing input %p", input); |
| gst_ghost_pad_set_target (GST_GHOST_PAD (input->ghost_sink), NULL); |
| gst_element_remove_pad (GST_ELEMENT (dbin), input->ghost_sink); |
| if (input->parsebin) { |
| g_signal_handler_disconnect (input->parsebin, input->pad_removed_sigid); |
| g_signal_handler_disconnect (input->parsebin, input->pad_added_sigid); |
| g_signal_handler_disconnect (input->parsebin, input->drained_sigid); |
| gst_element_set_state (input->parsebin, GST_STATE_NULL); |
| gst_object_unref (input->parsebin); |
| gst_object_unref (input->parsebin_sink); |
| } |
| if (input->collection) |
| gst_object_unref (input->collection); |
| g_free (input); |
| } |
| |
| static void |
| free_input_async (GstDecodebin3 * dbin, DecodebinInput * input) |
| { |
| GST_LOG_OBJECT (dbin, "pushing input %p on thread pool to free", input); |
| gst_element_call_async (GST_ELEMENT_CAST (dbin), |
| (GstElementCallAsyncFunc) free_input, input, NULL); |
| } |
| |
| /* Call with INPUT_LOCK taken */ |
| static DecodebinInput * |
| create_new_input (GstDecodebin3 * dbin, gboolean main) |
| { |
| DecodebinInput *input; |
| |
| input = g_new0 (DecodebinInput, 1); |
| input->dbin = dbin; |
| input->is_main = main; |
| input->group_id = GST_GROUP_ID_INVALID; |
| if (main) |
| input->ghost_sink = gst_ghost_pad_new_no_target ("sink", GST_PAD_SINK); |
| else { |
| gchar *pad_name = g_strdup_printf ("sink_%u", dbin->input_counter++); |
| input->ghost_sink = gst_ghost_pad_new_no_target (pad_name, GST_PAD_SINK); |
| g_free (pad_name); |
| } |
| g_object_set_data (G_OBJECT (input->ghost_sink), "decodebin.input", input); |
| gst_pad_set_link_function (input->ghost_sink, gst_decodebin3_input_pad_link); |
| gst_pad_set_unlink_function (input->ghost_sink, |
| gst_decodebin3_input_pad_unlink); |
| |
| gst_pad_set_active (input->ghost_sink, TRUE); |
| gst_element_add_pad ((GstElement *) dbin, input->ghost_sink); |
| |
| return input; |
| |
| } |
| |
| static GstPad * |
| gst_decodebin3_request_new_pad (GstElement * element, GstPadTemplate * temp, |
| const gchar * name, const GstCaps * caps) |
| { |
| GstDecodebin3 *dbin = (GstDecodebin3 *) element; |
| DecodebinInput *input; |
| GstPad *res = NULL; |
| |
| /* We are ignoring names for the time being, not sure it makes any sense |
| * within the context of decodebin3 ... */ |
| input = create_new_input (dbin, FALSE); |
| if (input) { |
| INPUT_LOCK (dbin); |
| dbin->other_inputs = g_list_append (dbin->other_inputs, input); |
| res = input->ghost_sink; |
| INPUT_UNLOCK (dbin); |
| } |
| |
| return res; |
| } |
| |
| /* Must be called with factories lock! */ |
| static void |
| gst_decode_bin_update_factories_list (GstDecodebin3 * dbin) |
| { |
| guint cookie; |
| |
| cookie = gst_registry_get_feature_list_cookie (gst_registry_get ()); |
| if (!dbin->factories || dbin->factories_cookie != cookie) { |
| GList *tmp; |
| if (dbin->factories) |
| gst_plugin_feature_list_free (dbin->factories); |
| if (dbin->decoder_factories) |
| g_list_free (dbin->decoder_factories); |
| if (dbin->decodable_factories) |
| g_list_free (dbin->decodable_factories); |
| dbin->factories = |
| gst_element_factory_list_get_elements |
| (GST_ELEMENT_FACTORY_TYPE_DECODABLE, GST_RANK_MARGINAL); |
| dbin->factories = |
| g_list_sort (dbin->factories, gst_plugin_feature_rank_compare_func); |
| dbin->factories_cookie = cookie; |
| |
| /* Filter decoder and other decodables */ |
| dbin->decoder_factories = NULL; |
| dbin->decodable_factories = NULL; |
| for (tmp = dbin->factories; tmp; tmp = tmp->next) { |
| GstElementFactory *fact = (GstElementFactory *) tmp->data; |
| if (gst_element_factory_list_is_type (fact, |
| GST_ELEMENT_FACTORY_TYPE_DECODER)) |
| dbin->decoder_factories = g_list_append (dbin->decoder_factories, fact); |
| else |
| dbin->decodable_factories = |
| g_list_append (dbin->decodable_factories, fact); |
| } |
| } |
| } |
| |
| /* Must be called with appropriate lock if list is a protected variable */ |
| static const gchar * |
| stream_in_list (GList * list, const gchar * sid) |
| { |
| GList *tmp; |
| |
| #if EXTRA_DEBUG |
| for (tmp = list; tmp; tmp = tmp->next) { |
| gchar *osid = (gchar *) tmp->data; |
| GST_DEBUG ("Checking %s against %s", sid, osid); |
| } |
| #endif |
| |
| for (tmp = list; tmp; tmp = tmp->next) { |
| const gchar *osid = (gchar *) tmp->data; |
| if (!g_strcmp0 (sid, osid)) |
| return osid; |
| } |
| |
| return NULL; |
| } |
| |
| static void |
| update_requested_selection (GstDecodebin3 * dbin) |
| { |
| guint i, nb; |
| GList *tmp = NULL; |
| GstStreamType used_types = 0; |
| GstStreamCollection *collection; |
| |
| /* 1. Is there a pending SELECT_STREAMS we can return straight away since |
| * the switch handler will take care of the pending selection */ |
| SELECTION_LOCK (dbin); |
| if (dbin->pending_select_streams) { |
| GST_DEBUG_OBJECT (dbin, |
| "No need to create pending selection, SELECT_STREAMS underway"); |
| goto beach; |
| } |
| |
| collection = dbin->collection; |
| if (G_UNLIKELY (collection == NULL)) { |
| GST_DEBUG_OBJECT (dbin, "No current GstStreamCollection"); |
| goto beach; |
| } |
| nb = gst_stream_collection_get_size (collection); |
| |
| /* 2. If not, are we in EXPOSE_ALL_MODE ? If so, match everything */ |
| GST_FIXME_OBJECT (dbin, "Implement EXPOSE_ALL_MODE"); |
| |
| /* 3. If not, check if we already have some of the streams in the |
| * existing active/requested selection */ |
| for (i = 0; i < nb; i++) { |
| GstStream *stream = gst_stream_collection_get_stream (collection, i); |
| const gchar *sid = gst_stream_get_stream_id (stream); |
| gint request = -1; |
| /* Fire select-stream signal to see if outside components want to |
| * hint at which streams should be selected */ |
| g_signal_emit (G_OBJECT (dbin), |
| gst_decodebin3_signals[SIGNAL_SELECT_STREAM], 0, collection, stream, |
| &request); |
| GST_DEBUG_OBJECT (dbin, "stream %s , request:%d", sid, request); |
| if (request == 1 || (request == -1 |
| && (stream_in_list (dbin->requested_selection, sid) |
| || stream_in_list (dbin->active_selection, sid)))) { |
| GstStreamType curtype = gst_stream_get_stream_type (stream); |
| if (request == 1) |
| GST_DEBUG_OBJECT (dbin, |
| "Using stream requested by 'select-stream' signal : %s", sid); |
| else |
| GST_DEBUG_OBJECT (dbin, |
| "Re-using stream already present in requested or active selection : %s", |
| sid); |
| tmp = g_list_append (tmp, (gchar *) sid); |
| used_types |= curtype; |
| } |
| } |
| |
| /* 4. If not, match one stream of each type */ |
| for (i = 0; i < nb; i++) { |
| GstStream *stream = gst_stream_collection_get_stream (collection, i); |
| GstStreamType curtype = gst_stream_get_stream_type (stream); |
| if (!(used_types & curtype)) { |
| const gchar *sid = gst_stream_get_stream_id (stream); |
| GST_DEBUG_OBJECT (dbin, "Selecting stream '%s' of type %s", |
| sid, gst_stream_type_get_name (curtype)); |
| tmp = g_list_append (tmp, (gchar *) sid); |
| used_types |= curtype; |
| } |
| } |
| |
| beach: |
| /* Finally set the requested selection */ |
| if (tmp) { |
| if (dbin->requested_selection) { |
| GST_FIXME_OBJECT (dbin, |
| "Replacing non-NULL requested_selection, what should we do ??"); |
| g_list_free_full (dbin->requested_selection, g_free); |
| } |
| dbin->requested_selection = |
| g_list_copy_deep (tmp, (GCopyFunc) g_strdup, NULL); |
| dbin->selection_updated = TRUE; |
| g_list_free (tmp); |
| } |
| SELECTION_UNLOCK (dbin); |
| } |
| |
| /* Call with INPUT_LOCK taken */ |
| static GstStreamCollection * |
| get_merged_collection (GstDecodebin3 * dbin) |
| { |
| gboolean needs_merge = FALSE; |
| GstStreamCollection *res = NULL; |
| GList *tmp; |
| guint i, nb_stream; |
| |
| /* First check if we need to do a merge or just return the only collection */ |
| res = dbin->main_input->collection; |
| |
| for (tmp = dbin->other_inputs; tmp; tmp = tmp->next) { |
| DecodebinInput *input = (DecodebinInput *) tmp->data; |
| if (input->collection) { |
| if (res) { |
| needs_merge = TRUE; |
| break; |
| } |
| res = input->collection; |
| } |
| } |
| |
| if (!needs_merge) { |
| GST_DEBUG_OBJECT (dbin, "No need to merge, returning %p", res); |
| return res ? gst_object_ref (res) : NULL; |
| } |
| |
| /* We really need to create a new collection */ |
| /* FIXME : Some numbering scheme maybe ?? */ |
| res = gst_stream_collection_new ("decodebin3"); |
| if (dbin->main_input->collection) { |
| nb_stream = gst_stream_collection_get_size (dbin->main_input->collection); |
| GST_DEBUG_OBJECT (dbin, "main input %p %d", dbin->main_input, nb_stream); |
| for (i = 0; i < nb_stream; i++) { |
| GstStream *stream = |
| gst_stream_collection_get_stream (dbin->main_input->collection, i); |
| gst_stream_collection_add_stream (res, gst_object_ref (stream)); |
| } |
| } |
| |
| for (tmp = dbin->other_inputs; tmp; tmp = tmp->next) { |
| DecodebinInput *input = (DecodebinInput *) tmp->data; |
| GST_DEBUG_OBJECT (dbin, "input %p , collection %p", input, |
| input->collection); |
| if (input->collection) { |
| nb_stream = gst_stream_collection_get_size (input->collection); |
| GST_DEBUG_OBJECT (dbin, "nb_stream : %d", nb_stream); |
| for (i = 0; i < nb_stream; i++) { |
| GstStream *stream = |
| gst_stream_collection_get_stream (input->collection, i); |
| gst_stream_collection_add_stream (res, gst_object_ref (stream)); |
| } |
| } |
| } |
| |
| return res; |
| } |
| |
| /* Call with INPUT_LOCK taken */ |
| static DecodebinInput * |
| find_message_parsebin (GstDecodebin3 * dbin, GstElement * child) |
| { |
| DecodebinInput *input = NULL; |
| GstElement *parent = gst_object_ref (child); |
| GList *tmp; |
| |
| do { |
| GstElement *next_parent; |
| |
| GST_DEBUG_OBJECT (dbin, "parent %s", |
| parent ? GST_ELEMENT_NAME (parent) : "<NONE>"); |
| |
| if (parent == dbin->main_input->parsebin) { |
| input = dbin->main_input; |
| break; |
| } |
| for (tmp = dbin->other_inputs; tmp; tmp = tmp->next) { |
| DecodebinInput *cur = (DecodebinInput *) tmp->data; |
| if (parent == cur->parsebin) { |
| input = cur; |
| break; |
| } |
| } |
| next_parent = (GstElement *) gst_element_get_parent (parent); |
| gst_object_unref (parent); |
| parent = next_parent; |
| |
| } while (parent && parent != (GstElement *) dbin); |
| |
| if (parent) |
| gst_object_unref (parent); |
| |
| return input; |
| } |
| |
| static const gchar * |
| stream_in_collection (GstDecodebin3 * dbin, gchar * sid) |
| { |
| guint i, len; |
| |
| if (dbin->collection == NULL) |
| return NULL; |
| len = gst_stream_collection_get_size (dbin->collection); |
| for (i = 0; i < len; i++) { |
| GstStream *stream = gst_stream_collection_get_stream (dbin->collection, i); |
| const gchar *osid = gst_stream_get_stream_id (stream); |
| if (!g_strcmp0 (sid, osid)) |
| return osid; |
| } |
| |
| return NULL; |
| } |
| |
| /* Call with INPUT_LOCK taken */ |
| static void |
| handle_stream_collection (GstDecodebin3 * dbin, |
| GstStreamCollection * collection, GstElement * child) |
| { |
| #ifndef GST_DISABLE_GST_DEBUG |
| const gchar *upstream_id; |
| guint i; |
| #endif |
| DecodebinInput *input = find_message_parsebin (dbin, child); |
| |
| if (!input) { |
| GST_DEBUG_OBJECT (dbin, |
| "Couldn't find corresponding input, most likely shutting down"); |
| return; |
| } |
| |
| /* Replace collection in input */ |
| if (input->collection) |
| gst_object_unref (input->collection); |
| input->collection = gst_object_ref (collection); |
| GST_DEBUG_OBJECT (dbin, "Setting collection %p on input %p", collection, |
| input); |
| |
| /* Merge collection if needed */ |
| collection = get_merged_collection (dbin); |
| |
| #ifndef GST_DISABLE_GST_DEBUG |
| /* Just some debugging */ |
| upstream_id = gst_stream_collection_get_upstream_id (collection); |
| GST_DEBUG ("Received Stream Collection. Upstream_id : %s", upstream_id); |
| GST_DEBUG ("From input %p", input); |
| GST_DEBUG (" %d streams", gst_stream_collection_get_size (collection)); |
| for (i = 0; i < gst_stream_collection_get_size (collection); i++) { |
| GstStream *stream = gst_stream_collection_get_stream (collection, i); |
| GstTagList *taglist; |
| GstCaps *caps; |
| |
| GST_DEBUG (" Stream '%s'", gst_stream_get_stream_id (stream)); |
| GST_DEBUG (" type : %s", |
| gst_stream_type_get_name (gst_stream_get_stream_type (stream))); |
| GST_DEBUG (" flags : 0x%x", gst_stream_get_stream_flags (stream)); |
| taglist = gst_stream_get_tags (stream); |
| GST_DEBUG (" tags : %" GST_PTR_FORMAT, taglist); |
| caps = gst_stream_get_caps (stream); |
| GST_DEBUG (" caps : %" GST_PTR_FORMAT, caps); |
| if (taglist) |
| gst_tag_list_unref (taglist); |
| if (caps) |
| gst_caps_unref (caps); |
| } |
| #endif |
| |
| /* Store collection for later usage */ |
| SELECTION_LOCK (dbin); |
| if (dbin->collection == NULL) { |
| dbin->collection = collection; |
| } else { |
| /* We need to check who emitted this collection (the owner). |
| * If we already had a collection from that user, this one is an update, |
| * that is to say that we need to figure out how we are going to re-use |
| * the streams/slot */ |
| GST_FIXME_OBJECT (dbin, "New collection but already had one ..."); |
| /* FIXME : When do we switch from pending collection to active collection ? |
| * When all streams from active collection are drained in multiqueue output ? */ |
| gst_object_unref (dbin->collection); |
| dbin->collection = collection; |
| /* dbin->pending_collection = */ |
| /* g_list_append (dbin->pending_collection, collection); */ |
| } |
| SELECTION_UNLOCK (dbin); |
| } |
| |
| static void |
| gst_decodebin3_handle_message (GstBin * bin, GstMessage * message) |
| { |
| GstDecodebin3 *dbin = (GstDecodebin3 *) bin; |
| gboolean posting_collection = FALSE; |
| |
| GST_DEBUG_OBJECT (bin, "Got Message %s", GST_MESSAGE_TYPE_NAME (message)); |
| |
| switch (GST_MESSAGE_TYPE (message)) { |
| case GST_MESSAGE_STREAM_COLLECTION: |
| { |
| GstStreamCollection *collection = NULL; |
| gst_message_parse_stream_collection (message, &collection); |
| if (collection) { |
| INPUT_LOCK (dbin); |
| handle_stream_collection (dbin, collection, |
| (GstElement *) GST_MESSAGE_SRC (message)); |
| posting_collection = TRUE; |
| INPUT_UNLOCK (dbin); |
| } |
| |
| SELECTION_LOCK (dbin); |
| if (dbin->collection && collection != dbin->collection) { |
| /* Replace collection message, we most likely aggregated it */ |
| GstMessage *new_msg; |
| new_msg = |
| gst_message_new_stream_collection ((GstObject *) dbin, |
| dbin->collection); |
| gst_message_unref (message); |
| message = new_msg; |
| } |
| SELECTION_UNLOCK (dbin); |
| |
| if (collection) |
| gst_object_unref (collection); |
| break; |
| } |
| default: |
| break; |
| } |
| |
| GST_BIN_CLASS (parent_class)->handle_message (bin, message); |
| |
| if (posting_collection) { |
| /* Figure out a selection for that collection */ |
| update_requested_selection (dbin); |
| } |
| } |
| |
| static DecodebinOutputStream * |
| find_free_compatible_output (GstDecodebin3 * dbin, GstStream * stream) |
| { |
| GList *tmp; |
| GstStreamType stype = gst_stream_get_stream_type (stream); |
| |
| for (tmp = dbin->output_streams; tmp; tmp = tmp->next) { |
| DecodebinOutputStream *output = (DecodebinOutputStream *) tmp->data; |
| if (output->type == stype && output->slot && output->slot->active_stream) { |
| GstStream *tstream = output->slot->active_stream; |
| if (!stream_in_list (dbin->requested_selection, |
| (gchar *) gst_stream_get_stream_id (tstream))) { |
| return output; |
| } |
| } |
| } |
| |
| return NULL; |
| } |
| |
| /* Give a certain slot, figure out if it should be linked to an |
| * output stream |
| * CALL WITH SELECTION LOCK TAKEN !*/ |
| static DecodebinOutputStream * |
| get_output_for_slot (MultiQueueSlot * slot) |
| { |
| GstDecodebin3 *dbin = slot->dbin; |
| DecodebinOutputStream *output = NULL; |
| const gchar *stream_id; |
| GstCaps *caps; |
| gchar *id_in_list = NULL; |
| |
| /* If we already have a configured output, just use it */ |
| if (slot->output != NULL) |
| return slot->output; |
| |
| /* |
| * FIXME |
| * |
| * This method needs to be split into multiple parts |
| * |
| * 1) Figure out whether stream should be exposed or not |
| * This is based on autoplug-continue, EXPOSE_ALL_MODE, or presence |
| * in the default stream attribution |
| * |
| * 2) Figure out whether an output stream should be created, whether |
| * we can re-use the output stream already linked to the slot, or |
| * whether we need to get re-assigned another (currently used) output |
| * stream. |
| */ |
| |
| stream_id = gst_stream_get_stream_id (slot->active_stream); |
| caps = gst_stream_get_caps (slot->active_stream); |
| GST_DEBUG_OBJECT (dbin, "stream %s , %" GST_PTR_FORMAT, stream_id, caps); |
| gst_caps_unref (caps); |
| |
| /* 0. Emit autoplug-continue signal for pending caps ? */ |
| GST_FIXME_OBJECT (dbin, "emit autoplug-continue"); |
| |
| /* 1. if in EXPOSE_ALL_MODE, just accept */ |
| GST_FIXME_OBJECT (dbin, "Handle EXPOSE_ALL_MODE"); |
| |
| #if 0 |
| /* FIXME : The idea around this was to avoid activating a stream for |
| * which we have no decoder. Unfortunately it is way too |
| * expensive. Need to figure out a better solution */ |
| /* 2. Is there a potential decoder (if one is required) */ |
| if (!gst_caps_can_intersect (caps, dbin->caps) |
| && !have_factory (dbin, (GstCaps *) caps, |
| GST_ELEMENT_FACTORY_TYPE_DECODER)) { |
| GST_WARNING_OBJECT (dbin, "Don't have a decoder for %" GST_PTR_FORMAT, |
| caps); |
| SELECTION_UNLOCK (dbin); |
| gst_element_post_message (GST_ELEMENT_CAST (dbin), |
| gst_missing_decoder_message_new (GST_ELEMENT_CAST (dbin), caps)); |
| SELECTION_LOCK (dbin); |
| return NULL; |
| } |
| #endif |
| |
| /* 3. In default mode check if we should expose */ |
| id_in_list = (gchar *) stream_in_list (dbin->requested_selection, stream_id); |
| if (id_in_list) { |
| /* Check if we can steal an existing output stream we could re-use. |
| * that is: |
| * * an output stream whose slot->stream is not in requested |
| * * and is of the same type as this stream |
| */ |
| output = find_free_compatible_output (dbin, slot->active_stream); |
| if (output) { |
| /* Move this output from its current slot to this slot */ |
| dbin->to_activate = |
| g_list_append (dbin->to_activate, (gchar *) stream_id); |
| dbin->requested_selection = |
| g_list_remove (dbin->requested_selection, id_in_list); |
| g_free (id_in_list); |
| SELECTION_UNLOCK (dbin); |
| gst_pad_add_probe (output->slot->src_pad, GST_PAD_PROBE_TYPE_IDLE, |
| (GstPadProbeCallback) slot_unassign_probe, output->slot, NULL); |
| SELECTION_LOCK (dbin); |
| return NULL; |
| } |
| |
| output = create_output_stream (dbin, slot->type); |
| output->slot = slot; |
| GST_DEBUG ("Linking slot %p to new output %p", slot, output); |
| slot->output = output; |
| dbin->active_selection = |
| g_list_append (dbin->active_selection, (gchar *) stream_id); |
| } else |
| GST_DEBUG ("Not creating any output for slot %p", slot); |
| |
| return output; |
| } |
| |
| /* Returns SELECTED_STREAMS message if active_selection is equal to |
| * requested_selection, else NULL. |
| * Must be called with LOCK taken */ |
| static GstMessage * |
| is_selection_done (GstDecodebin3 * dbin) |
| { |
| GList *tmp; |
| GstMessage *msg; |
| |
| if (!dbin->selection_updated) |
| return NULL; |
| |
| GST_LOG_OBJECT (dbin, "Checking"); |
| |
| if (dbin->to_activate != NULL) { |
| GST_DEBUG ("Still have streams to activate"); |
| return NULL; |
| } |
| for (tmp = dbin->requested_selection; tmp; tmp = tmp->next) { |
| GST_DEBUG ("Checking requested stream %s", (gchar *) tmp->data); |
| if (!stream_in_list (dbin->active_selection, (gchar *) tmp->data)) { |
| GST_DEBUG ("Not in active selection, returning"); |
| return NULL; |
| } |
| } |
| |
| GST_DEBUG_OBJECT (dbin, "Selection active, creating message"); |
| |
| /* We are completely active */ |
| msg = gst_message_new_streams_selected ((GstObject *) dbin, dbin->collection); |
| GST_MESSAGE_SEQNUM (msg) = dbin->select_streams_seqnum; |
| for (tmp = dbin->output_streams; tmp; tmp = tmp->next) { |
| DecodebinOutputStream *output = (DecodebinOutputStream *) tmp->data; |
| if (output->slot) { |
| GST_DEBUG_OBJECT (dbin, "Adding stream %s", |
| gst_stream_get_stream_id (output->slot->active_stream)); |
| |
| gst_message_streams_selected_add (msg, output->slot->active_stream); |
| } else |
| GST_WARNING_OBJECT (dbin, "No valid slot for output %p", output); |
| } |
| dbin->selection_updated = FALSE; |
| return msg; |
| } |
| |
| /* Must be called with SELECTION_LOCK taken */ |
| static void |
| check_all_slot_for_eos (GstDecodebin3 * dbin) |
| { |
| gboolean all_drained = TRUE; |
| GList *iter; |
| |
| GST_DEBUG_OBJECT (dbin, "check slot for eos"); |
| |
| for (iter = dbin->slots; iter; iter = iter->next) { |
| MultiQueueSlot *slot = iter->data; |
| |
| if (!slot->output) |
| continue; |
| |
| if (slot->is_drained) { |
| GST_LOG_OBJECT (slot->sink_pad, "slot %p is drained", slot); |
| continue; |
| } |
| |
| all_drained = FALSE; |
| break; |
| } |
| |
| if (all_drained) { |
| INPUT_LOCK (dbin); |
| if (!pending_pads_are_eos (dbin->main_input)) |
| all_drained = FALSE; |
| |
| if (all_drained) { |
| for (iter = dbin->other_inputs; iter; iter = iter->next) { |
| if (!pending_pads_are_eos ((DecodebinInput *) iter->data)) { |
| all_drained = FALSE; |
| break; |
| } |
| } |
| } |
| INPUT_UNLOCK (dbin); |
| } |
| |
| if (all_drained) { |
| GST_DEBUG_OBJECT (dbin, |
| "All active slots are drained, and no pending input, push EOS"); |
| |
| for (iter = dbin->input_streams; iter; iter = iter->next) { |
| DecodebinInputStream *input = (DecodebinInputStream *) iter->data; |
| GstPad *peer = gst_pad_get_peer (input->srcpad); |
| |
| /* Send EOS to all slots */ |
| if (peer) { |
| GstStructure *s; |
| GstEvent *stream_start, *eos; |
| |
| stream_start = |
| gst_pad_get_sticky_event (input->srcpad, GST_EVENT_STREAM_START, 0); |
| |
| /* First forward a custom STREAM_START event to reset the EOS status (if any) */ |
| if (stream_start) { |
| GstStructure *s; |
| GstEvent *custom_stream_start = gst_event_copy (stream_start); |
| gst_event_unref (stream_start); |
| s = (GstStructure *) gst_event_get_structure (custom_stream_start); |
| gst_structure_set (s, "decodebin3-flushing-stream-start", |
| G_TYPE_BOOLEAN, TRUE, NULL); |
| gst_pad_send_event (peer, custom_stream_start); |
| } |
| |
| eos = gst_event_new_eos (); |
| s = gst_event_writable_structure (eos); |
| gst_structure_set (s, "decodebin3-custom-final-eos", G_TYPE_BOOLEAN, |
| TRUE, NULL); |
| gst_pad_send_event (peer, eos); |
| gst_object_unref (peer); |
| } else |
| GST_DEBUG_OBJECT (dbin, "no output"); |
| } |
| } |
| } |
| |
| static GstPadProbeReturn |
| multiqueue_src_probe (GstPad * pad, GstPadProbeInfo * info, |
| MultiQueueSlot * slot) |
| { |
| GstPadProbeReturn ret = GST_PAD_PROBE_OK; |
| GstDecodebin3 *dbin = slot->dbin; |
| |
| if (GST_IS_EVENT (GST_PAD_PROBE_INFO_DATA (info))) { |
| GstEvent *ev = GST_PAD_PROBE_INFO_EVENT (info); |
| |
| GST_DEBUG_OBJECT (pad, "Got event %p %s", ev, GST_EVENT_TYPE_NAME (ev)); |
| switch (GST_EVENT_TYPE (ev)) { |
| case GST_EVENT_STREAM_START: |
| { |
| GstStream *stream = NULL; |
| const GstStructure *s = gst_event_get_structure (ev); |
| |
| /* Drop STREAM_START events used to cleanup multiqueue */ |
| if (s |
| && gst_structure_has_field (s, |
| "decodebin3-flushing-stream-start")) { |
| ret = GST_PAD_PROBE_HANDLED; |
| gst_event_unref (ev); |
| break; |
| } |
| |
| gst_event_parse_stream (ev, &stream); |
| if (stream == NULL) { |
| GST_ERROR_OBJECT (pad, |
| "Got a STREAM_START event without a GstStream"); |
| break; |
| } |
| slot->is_drained = FALSE; |
| GST_DEBUG_OBJECT (pad, "Stream Start '%s'", |
| gst_stream_get_stream_id (stream)); |
| if (slot->active_stream == NULL) { |
| slot->active_stream = stream; |
| } else if (slot->active_stream != stream) { |
| GST_FIXME_OBJECT (pad, "Handle stream changes (%s => %s) !", |
| gst_stream_get_stream_id (slot->active_stream), |
| gst_stream_get_stream_id (stream)); |
| gst_object_unref (slot->active_stream); |
| slot->active_stream = stream; |
| } else |
| gst_object_unref (stream); |
| #if 0 /* Disabled because stream-start is pushed for every buffer on every unlinked pad */ |
| { |
| gboolean is_active, is_requested; |
| /* Quick check to see if we're in the current selection */ |
| /* FIXME : Re-check all slot<=>output mappings based on requested_selection */ |
| SELECTION_LOCK (dbin); |
| GST_DEBUG_OBJECT (dbin, "Checking active selection"); |
| is_active = stream_in_list (dbin->active_selection, stream_id); |
| GST_DEBUG_OBJECT (dbin, "Checking requested selection"); |
| is_requested = stream_in_list (dbin->requested_selection, stream_id); |
| SELECTION_UNLOCK (dbin); |
| if (is_active) |
| GST_DEBUG_OBJECT (pad, "Slot in ACTIVE selection (output:%p)", |
| slot->output); |
| if (is_requested) |
| GST_DEBUG_OBJECT (pad, "Slot in REQUESTED selection (output:%p)", |
| slot->output); |
| else if (slot->output) { |
| GST_DEBUG_OBJECT (pad, |
| "Slot needs to be deactivated ? It's no longer in requested selection"); |
| } else if (!is_active) |
| GST_DEBUG_OBJECT (pad, |
| "Slot in neither active nor requested selection"); |
| } |
| #endif |
| } |
| break; |
| case GST_EVENT_CAPS: |
| { |
| /* Configure the output slot if needed */ |
| DecodebinOutputStream *output; |
| GstMessage *msg = NULL; |
| SELECTION_LOCK (dbin); |
| output = get_output_for_slot (slot); |
| if (output) { |
| reconfigure_output_stream (output, slot); |
| msg = is_selection_done (dbin); |
| } |
| SELECTION_UNLOCK (dbin); |
| if (msg) |
| gst_element_post_message ((GstElement *) slot->dbin, msg); |
| } |
| break; |
| case GST_EVENT_EOS: |
| { |
| const GstStructure *s = gst_event_get_structure (ev); |
| gboolean was_drained = slot->is_drained; |
| slot->is_drained = TRUE; |
| |
| /* Custom EOS handling first */ |
| if (s && gst_structure_has_field (s, "decodebin3-custom-eos")) { |
| GST_LOG_OBJECT (pad, "Received custom EOS"); |
| ret = GST_PAD_PROBE_HANDLED; |
| SELECTION_LOCK (dbin); |
| if (slot->input == NULL) { |
| GST_DEBUG_OBJECT (pad, |
| "Got custom-eos from null input stream, remove output stream"); |
| /* Remove the output */ |
| if (slot->output) { |
| DecodebinOutputStream *output = slot->output; |
| dbin->output_streams = |
| g_list_remove (dbin->output_streams, output); |
| free_output_stream (dbin, output); |
| } |
| slot->probe_id = 0; |
| dbin->slots = g_list_remove (dbin->slots, slot); |
| free_multiqueue_slot_async (dbin, slot); |
| ret = GST_PAD_PROBE_REMOVE; |
| } else if (!was_drained) { |
| check_all_slot_for_eos (dbin); |
| } |
| SELECTION_UNLOCK (dbin); |
| break; |
| } |
| |
| GST_FIXME_OBJECT (pad, "EOS on multiqueue source pad. input:%p", |
| slot->input); |
| if (slot->input == NULL) { |
| GstPad *peer; |
| GST_DEBUG_OBJECT (pad, |
| "last EOS for input, forwarding and removing slot"); |
| peer = gst_pad_get_peer (pad); |
| if (peer) { |
| gst_pad_send_event (peer, ev); |
| gst_object_unref (peer); |
| } else { |
| gst_event_unref (ev); |
| } |
| SELECTION_LOCK (dbin); |
| /* FIXME : Shouldn't we try to re-assign the output instead of just |
| * removing it ? */ |
| /* Remove the output */ |
| if (slot->output) { |
| DecodebinOutputStream *output = slot->output; |
| dbin->output_streams = g_list_remove (dbin->output_streams, output); |
| free_output_stream (dbin, output); |
| } |
| slot->probe_id = 0; |
| dbin->slots = g_list_remove (dbin->slots, slot); |
| SELECTION_UNLOCK (dbin); |
| |
| free_multiqueue_slot_async (dbin, slot); |
| ret = GST_PAD_PROBE_REMOVE; |
| } else if (s |
| && gst_structure_has_field (s, "decodebin3-custom-final-eos")) { |
| GST_DEBUG_OBJECT (pad, "Got final eos, propagating downstream"); |
| } else { |
| GST_DEBUG_OBJECT (pad, "Got regular eos (all_inputs_are_eos)"); |
| /* drop current event as eos will be sent in check_all_slot_for_eos |
| * when all output streams are also eos */ |
| ret = GST_PAD_PROBE_DROP; |
| SELECTION_LOCK (dbin); |
| check_all_slot_for_eos (dbin); |
| SELECTION_UNLOCK (dbin); |
| } |
| } |
| break; |
| default: |
| break; |
| } |
| } else if (GST_IS_QUERY (GST_PAD_PROBE_INFO_DATA (info))) { |
| GstQuery *query = GST_PAD_PROBE_INFO_QUERY (info); |
| switch (GST_QUERY_TYPE (query)) { |
| case GST_QUERY_CAPS: |
| { |
| GST_DEBUG_OBJECT (pad, "Intercepting CAPS query"); |
| gst_query_set_caps_result (query, GST_CAPS_ANY); |
| ret = GST_PAD_PROBE_HANDLED; |
| } |
| break; |
| |
| case GST_QUERY_ACCEPT_CAPS: |
| { |
| GST_DEBUG_OBJECT (pad, "Intercepting Accept Caps query"); |
| /* If the current decoder doesn't accept caps, we'll reconfigure |
| * on the actual caps event. So accept any caps. */ |
| gst_query_set_accept_caps_result (query, TRUE); |
| ret = GST_PAD_PROBE_HANDLED; |
| } |
| default: |
| break; |
| } |
| } |
| |
| return ret; |
| } |
| |
| /* Create a new multiqueue slot for the given type |
| * |
| * It is up to the caller to know whether that slot is needed or not |
| * (and release it when no longer needed) */ |
| static MultiQueueSlot * |
| create_new_slot (GstDecodebin3 * dbin, GstStreamType type) |
| { |
| MultiQueueSlot *slot; |
| GstIterator *it = NULL; |
| GValue item = { 0, }; |
| |
| GST_DEBUG_OBJECT (dbin, "Creating new slot for type %s", |
| gst_stream_type_get_name (type)); |
| slot = g_new0 (MultiQueueSlot, 1); |
| slot->dbin = dbin; |
| |
| slot->id = dbin->slot_id++; |
| |
| slot->type = type; |
| slot->sink_pad = gst_element_get_request_pad (dbin->multiqueue, "sink_%u"); |
| if (slot->sink_pad == NULL) |
| goto fail; |
| |
| it = gst_pad_iterate_internal_links (slot->sink_pad); |
| if (!it || (gst_iterator_next (it, &item)) != GST_ITERATOR_OK |
| || ((slot->src_pad = g_value_dup_object (&item)) == NULL)) { |
| GST_ERROR ("Couldn't get srcpad from multiqueue for sink pad %s:%s", |
| GST_DEBUG_PAD_NAME (slot->src_pad)); |
| goto fail; |
| } |
| gst_iterator_free (it); |
| g_value_reset (&item); |
| |
| g_object_set (slot->sink_pad, "group-id", (guint) type, NULL); |
| |
| /* Add event probe */ |
| slot->probe_id = |
| gst_pad_add_probe (slot->src_pad, |
| GST_PAD_PROBE_TYPE_EVENT_DOWNSTREAM | GST_PAD_PROBE_TYPE_QUERY_DOWNSTREAM, |
| (GstPadProbeCallback) multiqueue_src_probe, slot, NULL); |
| |
| GST_DEBUG ("Created new slot %u (%p) (%s:%s)", slot->id, slot, |
| GST_DEBUG_PAD_NAME (slot->src_pad)); |
| |
| dbin->slots = g_list_append (dbin->slots, slot); |
| |
| return slot; |
| |
| /* ERRORS */ |
| fail: |
| { |
| if (slot->sink_pad) |
| gst_element_release_request_pad (dbin->multiqueue, slot->sink_pad); |
| g_free (slot); |
| return NULL; |
| } |
| } |
| |
| /* Must be called with SELECTION_LOCK */ |
| static MultiQueueSlot * |
| get_slot_for_input (GstDecodebin3 * dbin, DecodebinInputStream * input) |
| { |
| GList *tmp; |
| MultiQueueSlot *empty_slot = NULL; |
| GstStreamType input_type = 0; |
| gchar *stream_id = NULL; |
| |
| GST_DEBUG_OBJECT (dbin, "input %p (stream %p %s)", |
| input, input->active_stream, |
| input-> |
| active_stream ? gst_stream_get_stream_id (input->active_stream) : ""); |
| |
| if (input->active_stream) { |
| input_type = gst_stream_get_stream_type (input->active_stream); |
| stream_id = (gchar *) gst_stream_get_stream_id (input->active_stream); |
| } |
| |
| /* Go over existing slots and check if there is already one for it */ |
| for (tmp = dbin->slots; tmp; tmp = tmp->next) { |
| MultiQueueSlot *slot = (MultiQueueSlot *) tmp->data; |
| /* Already used input, return that one */ |
| if (slot->input == input) { |
| GST_DEBUG_OBJECT (dbin, "Returning already specified slot %d", slot->id); |
| return slot; |
| } |
| } |
| |
| /* Go amongst all unused slots of the right type and try to find a candidate */ |
| for (tmp = dbin->slots; tmp; tmp = tmp->next) { |
| MultiQueueSlot *slot = (MultiQueueSlot *) tmp->data; |
| if (slot->input == NULL && input_type == slot->type) { |
| /* Remember this empty slot for later */ |
| empty_slot = slot; |
| /* Check if available slot is of the same stream_id */ |
| GST_LOG_OBJECT (dbin, "Checking candidate slot %d (active_stream:%p)", |
| slot->id, slot->active_stream); |
| if (stream_id && slot->active_stream) { |
| gchar *ostream_id = |
| (gchar *) gst_stream_get_stream_id (slot->active_stream); |
| GST_DEBUG_OBJECT (dbin, "Checking slot %d %s against %s", slot->id, |
| ostream_id, stream_id); |
| if (!g_strcmp0 (stream_id, ostream_id)) |
| break; |
| } |
| } |
| } |
| |
| if (empty_slot) { |
| GST_DEBUG_OBJECT (dbin, "Re-using existing unused slot %d", empty_slot->id); |
| empty_slot->input = input; |
| return empty_slot; |
| } |
| |
| if (input_type) |
| return create_new_slot (dbin, input_type); |
| |
| return NULL; |
| } |
| |
| static void |
| link_input_to_slot (DecodebinInputStream * input, MultiQueueSlot * slot) |
| { |
| if (slot->input != NULL && slot->input != input) { |
| GST_ERROR_OBJECT (slot->dbin, |
| "Trying to link input to an already used slot"); |
| return; |
| } |
| gst_pad_link_full (input->srcpad, slot->sink_pad, GST_PAD_LINK_CHECK_NOTHING); |
| slot->pending_stream = input->active_stream; |
| slot->input = input; |
| } |
| |
| #if 0 |
| static gboolean |
| have_factory (GstDecodebin3 * dbin, GstCaps * caps, |
| GstElementFactoryListType ftype) |
| { |
| gboolean ret = FALSE; |
| GList *res; |
| |
| g_mutex_lock (&dbin->factories_lock); |
| gst_decode_bin_update_factories_list (dbin); |
| if (ftype == GST_ELEMENT_FACTORY_TYPE_DECODER) |
| res = |
| gst_element_factory_list_filter (dbin->decoder_factories, |
| caps, GST_PAD_SINK, TRUE); |
| else |
| res = |
| gst_element_factory_list_filter (dbin->decodable_factories, |
| caps, GST_PAD_SINK, TRUE); |
| g_mutex_unlock (&dbin->factories_lock); |
| |
| if (res) { |
| ret = TRUE; |
| gst_plugin_feature_list_free (res); |
| } |
| |
| return ret; |
| } |
| #endif |
| |
| static GstElement * |
| create_element (GstDecodebin3 * dbin, GstStream * stream, |
| GstElementFactoryListType ftype) |
| { |
| GList *res; |
| GstElement *element = NULL; |
| GstCaps *caps; |
| |
| g_mutex_lock (&dbin->factories_lock); |
| gst_decode_bin_update_factories_list (dbin); |
| caps = gst_stream_get_caps (stream); |
| if (ftype == GST_ELEMENT_FACTORY_TYPE_DECODER) |
| res = |
| gst_element_factory_list_filter (dbin->decoder_factories, |
| caps, GST_PAD_SINK, TRUE); |
| else |
| res = |
| gst_element_factory_list_filter (dbin->decodable_factories, |
| caps, GST_PAD_SINK, TRUE); |
| g_mutex_unlock (&dbin->factories_lock); |
| |
| if (res) { |
| element = |
| gst_element_factory_create ((GstElementFactory *) res->data, NULL); |
| GST_DEBUG ("Created element '%s'", GST_ELEMENT_NAME (element)); |
| gst_plugin_feature_list_free (res); |
| } else { |
| GST_DEBUG ("Could not find an element for caps %" GST_PTR_FORMAT, caps); |
| } |
| |
| gst_caps_unref (caps); |
| return element; |
| } |
| |
| /* FIXME : VERY NAIVE. ASSUMING FIRST ONE WILL WORK */ |
| static GstElement * |
| create_decoder (GstDecodebin3 * dbin, GstStream * stream) |
| { |
| return create_element (dbin, stream, GST_ELEMENT_FACTORY_TYPE_DECODER); |
| } |
| |
| static GstPadProbeReturn |
| keyframe_waiter_probe (GstPad * pad, GstPadProbeInfo * info, |
| DecodebinOutputStream * output) |
| { |
| GstBuffer *buf = GST_PAD_PROBE_INFO_BUFFER (info); |
| /* If we have a keyframe, remove the probe and let all data through */ |
| /* FIXME : HANDLE HEADER BUFFER ?? */ |
| if (!GST_BUFFER_FLAG_IS_SET (buf, GST_BUFFER_FLAG_DELTA_UNIT) || |
| GST_BUFFER_FLAG_IS_SET (buf, GST_BUFFER_FLAG_HEADER)) { |
| GST_DEBUG_OBJECT (pad, |
| "Buffer is keyframe or header, letting through and removing probe"); |
| output->drop_probe_id = 0; |
| return GST_PAD_PROBE_REMOVE; |
| } |
| GST_DEBUG_OBJECT (pad, "Buffer is not a keyframe, dropping"); |
| return GST_PAD_PROBE_DROP; |
| } |
| |
| static void |
| reconfigure_output_stream (DecodebinOutputStream * output, |
| MultiQueueSlot * slot) |
| { |
| GstDecodebin3 *dbin = output->dbin; |
| GstCaps *new_caps = (GstCaps *) gst_stream_get_caps (slot->active_stream); |
| gboolean needs_decoder; |
| |
| needs_decoder = gst_caps_can_intersect (new_caps, dbin->caps) != TRUE; |
| |
| GST_DEBUG_OBJECT (dbin, |
| "Reconfiguring output %p to slot %p, needs_decoder:%d", output, slot, |
| needs_decoder); |
| |
| /* FIXME : Maybe make the output un-hook itself automatically ? */ |
| if (output->slot != NULL && output->slot != slot) { |
| GST_WARNING_OBJECT (dbin, |
| "Output still linked to another slot (%p)", output->slot); |
| gst_caps_unref (new_caps); |
| return; |
| } |
| |
| /* Check if existing config is reusable as-is by checking if |
| * the existing decoder accepts the new caps, if not delete |
| * it and create a new one */ |
| if (output->decoder) { |
| gboolean can_reuse_decoder; |
| |
| if (needs_decoder) { |
| can_reuse_decoder = |
| gst_pad_query_accept_caps (output->decoder_sink, new_caps); |
| } else |
| can_reuse_decoder = FALSE; |
| |
| if (can_reuse_decoder) { |
| if (output->type & GST_STREAM_TYPE_VIDEO && output->drop_probe_id == 0) { |
| GST_DEBUG_OBJECT (dbin, "Adding keyframe-waiter probe"); |
| output->drop_probe_id = |
| gst_pad_add_probe (slot->src_pad, GST_PAD_PROBE_TYPE_BUFFER, |
| (GstPadProbeCallback) keyframe_waiter_probe, output, NULL); |
| } |
| GST_DEBUG_OBJECT (dbin, "Reusing existing decoder for slot %p", slot); |
| if (output->linked == FALSE) { |
| gst_pad_link_full (slot->src_pad, output->decoder_sink, |
| GST_PAD_LINK_CHECK_NOTHING); |
| output->linked = TRUE; |
| } |
| gst_caps_unref (new_caps); |
| return; |
| } |
| |
| GST_DEBUG_OBJECT (dbin, "Removing old decoder for slot %p", slot); |
| |
| if (output->linked) |
| gst_pad_unlink (slot->src_pad, output->decoder_sink); |
| output->linked = FALSE; |
| if (output->drop_probe_id) { |
| gst_pad_remove_probe (slot->src_pad, output->drop_probe_id); |
| output->drop_probe_id = 0; |
| } |
| |
| if (!gst_ghost_pad_set_target ((GstGhostPad *) output->src_pad, NULL)) { |
| GST_ERROR_OBJECT (dbin, "Could not release decoder pad"); |
| gst_caps_unref (new_caps); |
| goto cleanup; |
| } |
| |
| gst_element_set_locked_state (output->decoder, TRUE); |
| gst_element_set_state (output->decoder, GST_STATE_NULL); |
| |
| gst_bin_remove ((GstBin *) dbin, output->decoder); |
| output->decoder = NULL; |
| } |
| |
| gst_caps_unref (new_caps); |
| |
| gst_object_replace ((GstObject **) & output->decoder_sink, NULL); |
| gst_object_replace ((GstObject **) & output->decoder_src, NULL); |
| |
| /* If a decoder is required, create one */ |
| if (needs_decoder) { |
| /* If we don't have a decoder yet, instantiate one */ |
| output->decoder = create_decoder (dbin, slot->active_stream); |
| if (output->decoder == NULL) { |
| GstCaps *caps; |
| |
| SELECTION_UNLOCK (dbin); |
| /* FIXME : Should we be smarter if there's a missing decoder ? |
| * Should we deactivate that stream ? */ |
| caps = gst_stream_get_caps (slot->active_stream); |
| gst_element_post_message (GST_ELEMENT_CAST (dbin), |
| gst_missing_decoder_message_new (GST_ELEMENT_CAST (dbin), caps)); |
| gst_caps_unref (caps); |
| SELECTION_LOCK (dbin); |
| goto cleanup; |
| } |
| if (!gst_bin_add ((GstBin *) dbin, output->decoder)) { |
| GST_ERROR_OBJECT (dbin, "could not add decoder to pipeline"); |
| goto cleanup; |
| } |
| output->decoder_sink = gst_element_get_static_pad (output->decoder, "sink"); |
| output->decoder_src = gst_element_get_static_pad (output->decoder, "src"); |
| if (output->type & GST_STREAM_TYPE_VIDEO) { |
| GST_DEBUG_OBJECT (dbin, "Adding keyframe-waiter probe"); |
| output->drop_probe_id = |
| gst_pad_add_probe (slot->src_pad, GST_PAD_PROBE_TYPE_BUFFER, |
| (GstPadProbeCallback) keyframe_waiter_probe, output, NULL); |
| } |
| if (gst_pad_link_full (slot->src_pad, output->decoder_sink, |
| GST_PAD_LINK_CHECK_NOTHING) != GST_PAD_LINK_OK) { |
| GST_ERROR_OBJECT (dbin, "could not link to %s:%s", |
| GST_DEBUG_PAD_NAME (output->decoder_sink)); |
| goto cleanup; |
| } |
| } else { |
| output->decoder_src = gst_object_ref (slot->src_pad); |
| output->decoder_sink = NULL; |
| } |
| output->linked = TRUE; |
| if (!gst_ghost_pad_set_target ((GstGhostPad *) output->src_pad, |
| output->decoder_src)) { |
| GST_ERROR_OBJECT (dbin, "Could not expose decoder pad"); |
| goto cleanup; |
| } |
| if (output->src_exposed == FALSE) { |
| output->src_exposed = TRUE; |
| gst_element_add_pad (GST_ELEMENT_CAST (dbin), output->src_pad); |
| } |
| |
| if (output->decoder) |
| gst_element_sync_state_with_parent (output->decoder); |
| |
| output->slot = slot; |
| return; |
| |
| cleanup: |
| { |
| GST_DEBUG_OBJECT (dbin, "Cleanup"); |
| if (output->decoder_sink) { |
| gst_object_unref (output->decoder_sink); |
| output->decoder_sink = NULL; |
| } |
| if (output->decoder_src) { |
| gst_object_unref (output->decoder_src); |
| output->decoder_src = NULL; |
| } |
| if (output->decoder) { |
| gst_element_set_state (output->decoder, GST_STATE_NULL); |
| gst_bin_remove ((GstBin *) dbin, output->decoder); |
| output->decoder = NULL; |
| } |
| } |
| } |
| |
| static GstPadProbeReturn |
| idle_reconfigure (GstPad * pad, GstPadProbeInfo * info, MultiQueueSlot * slot) |
| { |
| GstMessage *msg = NULL; |
| DecodebinOutputStream *output; |
| |
| SELECTION_LOCK (slot->dbin); |
| output = get_output_for_slot (slot); |
| |
| GST_DEBUG_OBJECT (pad, "output : %p", output); |
| |
| if (output) { |
| reconfigure_output_stream (output, slot); |
| msg = is_selection_done (slot->dbin); |
| } |
| SELECTION_UNLOCK (slot->dbin); |
| if (msg) |
| gst_element_post_message ((GstElement *) slot->dbin, msg); |
| |
| return GST_PAD_PROBE_REMOVE; |
| } |
| |
| static MultiQueueSlot * |
| find_slot_for_stream_id (GstDecodebin3 * dbin, const gchar * sid) |
| { |
| GList *tmp; |
| |
| for (tmp = dbin->slots; tmp; tmp = tmp->next) { |
| MultiQueueSlot *slot = (MultiQueueSlot *) tmp->data; |
| const gchar *stream_id; |
| if (slot->active_stream) { |
| stream_id = gst_stream_get_stream_id (slot->active_stream); |
| if (!g_strcmp0 (sid, stream_id)) |
| return slot; |
| } |
| if (slot->pending_stream && slot->pending_stream != slot->active_stream) { |
| stream_id = gst_stream_get_stream_id (slot->pending_stream); |
| if (!g_strcmp0 (sid, stream_id)) |
| return slot; |
| } |
| } |
| |
| return NULL; |
| } |
| |
| /* This function handles the reassignment of a slot. Call this from |
| * the streaming thread of a slot. */ |
| static gboolean |
| reassign_slot (GstDecodebin3 * dbin, MultiQueueSlot * slot) |
| { |
| DecodebinOutputStream *output; |
| MultiQueueSlot *target_slot = NULL; |
| GList *tmp; |
| const gchar *sid, *tsid; |
| |
| SELECTION_LOCK (dbin); |
| output = slot->output; |
| |
| if (G_UNLIKELY (slot->active_stream == NULL)) { |
| GST_DEBUG_OBJECT (slot->src_pad, |
| "Called on inactive slot (active_stream == NULL)"); |
| SELECTION_UNLOCK (dbin); |
| return FALSE; |
| } |
| |
| if (G_UNLIKELY (output == NULL)) { |
| GST_DEBUG_OBJECT (slot->src_pad, |
| "Slot doesn't have any output to be removed"); |
| SELECTION_UNLOCK (dbin); |
| return FALSE; |
| } |
| |
| sid = gst_stream_get_stream_id (slot->active_stream); |
| GST_DEBUG_OBJECT (slot->src_pad, "slot %s %p", sid, slot); |
| |
| /* Recheck whether this stream is still in the list of streams to deactivate */ |
| if (stream_in_list (dbin->requested_selection, sid)) { |
| /* Stream is in the list of requested streams, don't remove */ |
| SELECTION_UNLOCK (dbin); |
| GST_DEBUG_OBJECT (slot->src_pad, |
| "Stream '%s' doesn't need to be deactivated", sid); |
| return FALSE; |
| } |
| |
| /* Unlink slot from output */ |
| /* FIXME : Handle flushing ? */ |
| /* FIXME : Handle outputs without decoders */ |
| GST_DEBUG_OBJECT (slot->src_pad, "Unlinking from decoder %p", |
| output->decoder_sink); |
| if (output->decoder_sink) |
| gst_pad_unlink (slot->src_pad, output->decoder_sink); |
| output->linked = FALSE; |
| slot->output = NULL; |
| output->slot = NULL; |
| /* Remove sid from active selection */ |
| for (tmp = dbin->active_selection; tmp; tmp = tmp->next) |
| if (!g_strcmp0 (sid, tmp->data)) { |
| dbin->active_selection = g_list_delete_link (dbin->active_selection, tmp); |
| break; |
| } |
| |
| /* Can we re-assign this output to a requested stream ? */ |
| GST_DEBUG_OBJECT (slot->src_pad, "Attempting to re-assing output stream"); |
| for (tmp = dbin->to_activate; tmp; tmp = tmp->next) { |
| MultiQueueSlot *tslot = find_slot_for_stream_id (dbin, tmp->data); |
| GST_LOG_OBJECT (tslot->src_pad, "Checking slot %p (output:%p , stream:%s)", |
| tslot, tslot->output, gst_stream_get_stream_id (tslot->active_stream)); |
| if (tslot && tslot->type == output->type && tslot->output == NULL) { |
| GST_DEBUG_OBJECT (tslot->src_pad, "Using as reassigned slot"); |
| target_slot = tslot; |
| tsid = tmp->data; |
| /* Pass target stream id to requested selection */ |
| dbin->requested_selection = |
| g_list_append (dbin->requested_selection, g_strdup (tmp->data)); |
| dbin->to_activate = g_list_remove (dbin->to_activate, tmp->data); |
| break; |
| } |
| } |
| |
| if (target_slot) { |
| GST_DEBUG_OBJECT (slot->src_pad, "Assigning output to slot %p '%s'", |
| target_slot, tsid); |
| target_slot->output = output; |
| output->slot = target_slot; |
| dbin->active_selection = |
| g_list_append (dbin->active_selection, (gchar *) tsid); |
| SELECTION_UNLOCK (dbin); |
| |
| /* Wakeup the target slot so that it retries to send events/buffers |
| * thereby triggering the output reconfiguration codepath */ |
| gst_pad_add_probe (target_slot->src_pad, GST_PAD_PROBE_TYPE_IDLE, |
| (GstPadProbeCallback) idle_reconfigure, target_slot, NULL); |
| /* gst_pad_send_event (target_slot->src_pad, gst_event_new_reconfigure ()); */ |
| } else { |
| GstMessage *msg; |
| |
| dbin->output_streams = g_list_remove (dbin->output_streams, output); |
| free_output_stream (dbin, output); |
| msg = is_selection_done (slot->dbin); |
| SELECTION_UNLOCK (dbin); |
| |
| if (msg) |
| gst_element_post_message ((GstElement *) slot->dbin, msg); |
| } |
| |
| return TRUE; |
| } |
| |
| /* Idle probe called when a slot should be unassigned from its output stream. |
| * This is needed to ensure nothing is flowing when unlinking the slot. |
| * |
| * Also, this method will search for a pending stream which could re-use |
| * the output stream. */ |
| static GstPadProbeReturn |
| slot_unassign_probe (GstPad * pad, GstPadProbeInfo * info, |
| MultiQueueSlot * slot) |
| { |
| GstDecodebin3 *dbin = slot->dbin; |
| |
| reassign_slot (dbin, slot); |
| |
| return GST_PAD_PROBE_REMOVE; |
| } |
| |
| static gboolean |
| handle_stream_switch (GstDecodebin3 * dbin, GList * select_streams, |
| guint32 seqnum) |
| { |
| gboolean ret = TRUE; |
| GList *tmp; |
| /* List of slots to (de)activate. */ |
| GList *to_deactivate = NULL; |
| GList *to_activate = NULL; |
| /* List of unknown stream id, most likely means the event |
| * should be sent upstream so that elements can expose the requested stream */ |
| GList *unknown = NULL; |
| GList *to_reassign = NULL; |
| GList *future_request_streams = NULL; |
| GList *pending_streams = NULL; |
| GList *slots_to_reassign = NULL; |
| |
| SELECTION_LOCK (dbin); |
| if (G_UNLIKELY (seqnum != dbin->select_streams_seqnum)) { |
| GST_DEBUG_OBJECT (dbin, "New SELECT_STREAMS has arrived in the meantime"); |
| SELECTION_UNLOCK (dbin); |
| return TRUE; |
| } |
| /* Remove pending select_streams */ |
| g_list_free (dbin->pending_select_streams); |
| dbin->pending_select_streams = NULL; |
| |
| /* COMPARE the requested streams to the active and requested streams |
| * on multiqueue. */ |
| |
| /* First check the slots to activate and which ones are unknown */ |
| for (tmp = select_streams; tmp; tmp = tmp->next) { |
| const gchar *sid = (const gchar *) tmp->data; |
| MultiQueueSlot *slot; |
| GST_DEBUG_OBJECT (dbin, "Checking stream '%s'", sid); |
| slot = find_slot_for_stream_id (dbin, sid); |
| /* Find the corresponding slot */ |
| if (slot == NULL) { |
| if (stream_in_collection (dbin, (gchar *) sid)) { |
| pending_streams = g_list_append (pending_streams, (gchar *) sid); |
| } else { |
| GST_DEBUG_OBJECT (dbin, "We don't have a slot for stream '%s'", sid); |
| unknown = g_list_append (unknown, (gchar *) sid); |
| } |
| } else if (slot->output == NULL) { |
| GST_DEBUG_OBJECT (dbin, "We need to activate slot %p for stream '%s')", |
| slot, sid); |
| to_activate = g_list_append (to_activate, slot); |
| } else { |
| GST_DEBUG_OBJECT (dbin, |
| "Stream '%s' from slot %p is already active on output %p", sid, slot, |
| slot->output); |
| future_request_streams = |
| g_list_append (future_request_streams, (gchar *) sid); |
| } |
| } |
| |
| for (tmp = dbin->slots; tmp; tmp = tmp->next) { |
| MultiQueueSlot *slot = (MultiQueueSlot *) tmp->data; |
| /* For slots that have an output, check if it's part of the streams to |
| * be active */ |
| if (slot->output) { |
| gboolean slot_to_deactivate = TRUE; |
| |
| if (slot->active_stream) { |
| if (stream_in_list (select_streams, |
| gst_stream_get_stream_id (slot->active_stream))) |
| slot_to_deactivate = FALSE; |
| } |
| if (slot_to_deactivate && slot->pending_stream |
| && slot->pending_stream != slot->active_stream) { |
| if (stream_in_list (select_streams, |
| gst_stream_get_stream_id (slot->pending_stream))) |
| slot_to_deactivate = FALSE; |
| } |
| if (slot_to_deactivate) { |
| GST_DEBUG_OBJECT (dbin, |
| "Slot %p (%s) should be deactivated, no longer used", slot, |
| slot-> |
| active_stream ? gst_stream_get_stream_id (slot->active_stream) : |
| "NULL"); |
| to_deactivate = g_list_append (to_deactivate, slot); |
| } |
| } |
| } |
| |
| if (to_deactivate != NULL) { |
| GST_DEBUG_OBJECT (dbin, "Check if we can reassign slots"); |
| /* We need to compare what needs to be activated and deactivated in order |
| * to determine whether there are outputs that can be transferred */ |
| /* Take the stream-id of the slots that are to be activated, for which there |
| * is a slot of the same type that needs to be deactivated */ |
| tmp = to_deactivate; |
| while (tmp) { |
| MultiQueueSlot *slot_to_deactivate = (MultiQueueSlot *) tmp->data; |
| gboolean removeit = FALSE; |
| GList *tmp2, *next; |
| GST_DEBUG_OBJECT (dbin, |
| "Checking if slot to deactivate (%p) has a candidate slot to activate", |
| slot_to_deactivate); |
| for (tmp2 = to_activate; tmp2; tmp2 = tmp2->next) { |
| MultiQueueSlot *slot_to_activate = (MultiQueueSlot *) tmp2->data; |
| GST_DEBUG_OBJECT (dbin, "Comparing to slot %p", slot_to_activate); |
| if (slot_to_activate->type == slot_to_deactivate->type) { |
| GST_DEBUG_OBJECT (dbin, "Re-using"); |
| to_reassign = g_list_append (to_reassign, (gchar *) |
| gst_stream_get_stream_id (slot_to_activate->active_stream)); |
| slots_to_reassign = |
| g_list_append (slots_to_reassign, slot_to_deactivate); |
| to_activate = g_list_remove (to_activate, slot_to_activate); |
| removeit = TRUE; |
| break; |
| } |
| } |
| next = tmp->next; |
| if (removeit) |
| to_deactivate = g_list_delete_link (to_deactivate, tmp); |
| tmp = next; |
| } |
| } |
| |
| for (tmp = to_deactivate; tmp; tmp = tmp->next) { |
| MultiQueueSlot *slot = (MultiQueueSlot *) tmp->data; |
| GST_DEBUG_OBJECT (dbin, |
| "Really need to deactivate slot %p, but no available alternative", |
| slot); |
| |
| slots_to_reassign = g_list_append (slots_to_reassign, slot); |
| } |
| |
| /* The only slots left to activate are the ones that won't be reassigned and |
| * therefore really need to have a new output created */ |
| for (tmp = to_activate; tmp; tmp = tmp->next) { |
| MultiQueueSlot *slot = (MultiQueueSlot *) tmp->data; |
| if (slot->active_stream) |
| future_request_streams = |
| g_list_append (future_request_streams, |
| (gchar *) gst_stream_get_stream_id (slot->active_stream)); |
| else if (slot->pending_stream) |
| future_request_streams = |
| g_list_append (future_request_streams, |
| (gchar *) gst_stream_get_stream_id (slot->pending_stream)); |
| else |
| GST_ERROR_OBJECT (dbin, "No stream for slot %p !!", slot); |
| } |
| |
| if (to_activate == NULL && pending_streams != NULL) { |
| GST_DEBUG_OBJECT (dbin, "Stream switch requested for future collection"); |
| if (dbin->requested_selection) |
| g_list_free_full (dbin->requested_selection, g_free); |
| dbin->requested_selection = |
| g_list_copy_deep (select_streams, (GCopyFunc) g_strdup, NULL); |
| g_list_free (to_deactivate); |
| g_list_free (pending_streams); |
| to_deactivate = NULL; |
| pending_streams = NULL; |
| } else { |
| if (dbin->requested_selection) |
| g_list_free_full (dbin->requested_selection, g_free); |
| dbin->requested_selection = |
| g_list_copy_deep (future_request_streams, (GCopyFunc) g_strdup, NULL); |
| dbin->requested_selection = |
| g_list_concat (dbin->requested_selection, |
| g_list_copy_deep (pending_streams, (GCopyFunc) g_strdup, NULL)); |
| if (dbin->to_activate) |
| g_list_free (dbin->to_activate); |
| dbin->to_activate = g_list_copy (to_reassign); |
| } |
| |
| dbin->selection_updated = TRUE; |
| SELECTION_UNLOCK (dbin); |
| |
| if (unknown) { |
| GST_FIXME_OBJECT (dbin, "Got request for an unknown stream"); |
| g_list_free (unknown); |
| } |
| |
| if (to_activate && !slots_to_reassign) { |
| for (tmp = to_activate; tmp; tmp = tmp->next) { |
| MultiQueueSlot *slot = (MultiQueueSlot *) tmp->data; |
| gst_pad_add_probe (slot->src_pad, GST_PAD_PROBE_TYPE_IDLE, |
| (GstPadProbeCallback) idle_reconfigure, slot, NULL); |
| } |
| } |
| |
| /* For all streams to deactivate, add an idle probe where we will do |
| * the unassignment and switch over */ |
| for (tmp = slots_to_reassign; tmp; tmp = tmp->next) { |
| MultiQueueSlot *slot = (MultiQueueSlot *) tmp->data; |
| gst_pad_add_probe (slot->src_pad, GST_PAD_PROBE_TYPE_IDLE, |
| (GstPadProbeCallback) slot_unassign_probe, slot, NULL); |
| } |
| |
| if (to_deactivate) |
| g_list_free (to_deactivate); |
| if (to_activate) |
| g_list_free (to_activate); |
| if (to_reassign) |
| g_list_free (to_reassign); |
| if (future_request_streams) |
| g_list_free (future_request_streams); |
| if (pending_streams) |
| g_list_free (pending_streams); |
| if (slots_to_reassign) |
| g_list_free (slots_to_reassign); |
| |
| return ret; |
| } |
| |
| static GstPadProbeReturn |
| ghost_pad_event_probe (GstPad * pad, GstPadProbeInfo * info, |
| DecodebinOutputStream * output) |
| { |
| GstPadProbeReturn ret = GST_PAD_PROBE_OK; |
| GstDecodebin3 *dbin = output->dbin; |
| GstEvent *event = GST_PAD_PROBE_INFO_EVENT (info); |
| |
| GST_DEBUG_OBJECT (pad, "Got event %p %s", event, GST_EVENT_TYPE_NAME (event)); |
| |
| switch (GST_EVENT_TYPE (event)) { |
| case GST_EVENT_SELECT_STREAMS: |
| { |
| GstPad *peer; |
| GList *streams = NULL; |
| guint32 seqnum = gst_event_get_seqnum (event); |
| |
| SELECTION_LOCK (dbin); |
| if (seqnum == dbin->select_streams_seqnum) { |
| SELECTION_UNLOCK (dbin); |
| GST_DEBUG_OBJECT (pad, |
| "Already handled/handling that SELECT_STREAMS event"); |
| gst_event_unref (event); |
| ret = GST_PAD_PROBE_HANDLED; |
| break; |
| } |
| dbin->select_streams_seqnum = seqnum; |
| if (dbin->pending_select_streams != NULL) { |
| GST_LOG_OBJECT (dbin, "Replacing pending select streams"); |
| g_list_free (dbin->pending_select_streams); |
| dbin->pending_select_streams = NULL; |
| } |
| gst_event_parse_select_streams (event, &streams); |
| dbin->pending_select_streams = g_list_copy (streams); |
| SELECTION_UNLOCK (dbin); |
| |
| /* Send event upstream */ |
| if ((peer = gst_pad_get_peer (pad))) { |
| gst_pad_send_event (peer, event); |
| gst_object_unref (peer); |
| } else { |
| gst_event_unref (event); |
| } |
| /* Finally handle the switch */ |
| if (streams) { |
| handle_stream_switch (dbin, streams, seqnum); |
| g_list_free_full (streams, g_free); |
| } |
| ret = GST_PAD_PROBE_HANDLED; |
| } |
| break; |
| default: |
| break; |
| } |
| |
| return ret; |
| } |
| |
| static gboolean |
| gst_decodebin3_send_event (GstElement * element, GstEvent * event) |
| { |
| GST_DEBUG_OBJECT (element, "event %s", GST_EVENT_TYPE_NAME (event)); |
| if (GST_EVENT_TYPE (event) == GST_EVENT_SELECT_STREAMS) { |
| GstDecodebin3 *dbin = (GstDecodebin3 *) element; |
| GList *streams = NULL; |
| guint32 seqnum = gst_event_get_seqnum (event); |
| |
| SELECTION_LOCK (dbin); |
| if (seqnum == dbin->select_streams_seqnum) { |
| SELECTION_UNLOCK (dbin); |
| GST_DEBUG_OBJECT (dbin, |
| "Already handled/handling that SELECT_STREAMS event"); |
| return TRUE; |
| } |
| dbin->select_streams_seqnum = seqnum; |
| if (dbin->pending_select_streams != NULL) { |
| GST_LOG_OBJECT (dbin, "Replacing pending select streams"); |
| g_list_free (dbin->pending_select_streams); |
| dbin->pending_select_streams = NULL; |
| } |
| gst_event_parse_select_streams (event, &streams); |
| dbin->pending_select_streams = g_list_copy (streams); |
| SELECTION_UNLOCK (dbin); |
| |
| /* FIXME : We don't have an upstream ?? */ |
| #if 0 |
| /* Send event upstream */ |
| if ((peer = gst_pad_get_peer (pad))) { |
| gst_pad_send_event (peer, event); |
| gst_object_unref (peer); |
| } |
| #endif |
| /* Finally handle the switch */ |
| if (streams) { |
| handle_stream_switch (dbin, streams, seqnum); |
| g_list_free_full (streams, g_free); |
| } |
| |
| gst_event_unref (event); |
| return TRUE; |
| } |
| return GST_ELEMENT_CLASS (parent_class)->send_event (element, event); |
| } |
| |
| |
| static void |
| free_multiqueue_slot (GstDecodebin3 * dbin, MultiQueueSlot * slot) |
| { |
| if (slot->probe_id) |
| gst_pad_remove_probe (slot->src_pad, slot->probe_id); |
| if (slot->input) { |
| if (slot->input->srcpad) |
| gst_pad_unlink (slot->input->srcpad, slot->sink_pad); |
| } |
| |
| gst_element_release_request_pad (dbin->multiqueue, slot->sink_pad); |
| gst_object_replace ((GstObject **) & slot->sink_pad, NULL); |
| gst_object_replace ((GstObject **) & slot->src_pad, NULL); |
| gst_object_replace ((GstObject **) & slot->active_stream, NULL); |
| g_free (slot); |
| } |
| |
| static void |
| free_multiqueue_slot_async (GstDecodebin3 * dbin, MultiQueueSlot * slot) |
| { |
| GST_LOG_OBJECT (dbin, "pushing multiqueue slot on thread pool to free"); |
| gst_element_call_async (GST_ELEMENT_CAST (dbin), |
| (GstElementCallAsyncFunc) free_multiqueue_slot, slot, NULL); |
| } |
| |
| /* Create a DecodebinOutputStream for a given type |
| * Note: It will be empty initially, it needs to be configured |
| * afterwards */ |
| static DecodebinOutputStream * |
| create_output_stream (GstDecodebin3 * dbin, GstStreamType type) |
| { |
| DecodebinOutputStream *res = g_new0 (DecodebinOutputStream, 1); |
| gchar *pad_name; |
| const gchar *prefix; |
| GstStaticPadTemplate *templ; |
| GstPadTemplate *ptmpl; |
| guint32 *counter; |
| GstPad *internal_pad; |
| |
| GST_DEBUG_OBJECT (dbin, "Created new output stream %p for type %s", |
| res, gst_stream_type_get_name (type)); |
| |
| res->type = type; |
| res->dbin = dbin; |
| |
| if (type & GST_STREAM_TYPE_VIDEO) { |
| templ = &video_src_template; |
| counter = &dbin->vpadcount; |
| prefix = "video"; |
| } else if (type & GST_STREAM_TYPE_AUDIO) { |
| templ = &audio_src_template; |
| counter = &dbin->apadcount; |
| prefix = "audio"; |
| } else if (type & GST_STREAM_TYPE_TEXT) { |
| templ = &text_src_template; |
| counter = &dbin->tpadcount; |
| prefix = "text"; |
| } else { |
| templ = &src_template; |
| counter = &dbin->opadcount; |
| prefix = "src"; |
| } |
| |
| pad_name = g_strdup_printf ("%s_%u", prefix, *counter); |
| *counter += 1; |
| ptmpl = gst_static_pad_template_get (templ); |
| res->src_pad = gst_ghost_pad_new_no_target_from_template (pad_name, ptmpl); |
| gst_object_unref (ptmpl); |
| g_free (pad_name); |
| gst_pad_set_active (res->src_pad, TRUE); |
| /* Put an event probe on the internal proxy pad to detect upstream |
| * events */ |
| internal_pad = |
| (GstPad *) gst_proxy_pad_get_internal ((GstProxyPad *) res->src_pad); |
| gst_pad_add_probe (internal_pad, GST_PAD_PROBE_TYPE_EVENT_UPSTREAM, |
| (GstPadProbeCallback) ghost_pad_event_probe, res, NULL); |
| gst_object_unref (internal_pad); |
| |
| dbin->output_streams = g_list_append (dbin->output_streams, res); |
| |
| return res; |
| } |
| |
| static void |
| free_output_stream (GstDecodebin3 * dbin, DecodebinOutputStream * output) |
| { |
| if (output->slot) { |
| if (output->decoder_sink && output->decoder) |
| gst_pad_unlink (output->slot->src_pad, output->decoder_sink); |
| |
| output->slot->output = NULL; |
| output->slot = NULL; |
| } |
| gst_object_replace ((GstObject **) & output->decoder_sink, NULL); |
| gst_ghost_pad_set_target ((GstGhostPad *) output->src_pad, NULL); |
| gst_object_replace ((GstObject **) & output->decoder_src, NULL); |
| if (output->src_exposed) { |
| gst_element_remove_pad ((GstElement *) dbin, output->src_pad); |
| } |
| if (output->decoder) { |
| gst_element_set_locked_state (output->decoder, TRUE); |
| gst_element_set_state (output->decoder, GST_STATE_NULL); |
| gst_bin_remove ((GstBin *) dbin, output->decoder); |
| } |
| g_free (output); |
| } |
| |
| static GstStateChangeReturn |
| gst_decodebin3_change_state (GstElement * element, GstStateChange transition) |
| { |
| GstDecodebin3 *dbin = (GstDecodebin3 *) element; |
| GstStateChangeReturn ret; |
| |
| /* Upwards */ |
| switch (transition) { |
| default: |
| break; |
| } |
| ret = GST_ELEMENT_CLASS (parent_class)->change_state (element, transition); |
| if (ret == GST_STATE_CHANGE_FAILURE) |
| goto beach; |
| |
| switch (transition) { |
| case GST_STATE_CHANGE_PAUSED_TO_READY: |
| { |
| GList *tmp; |
| |
| /* Free output streams */ |
| for (tmp = dbin->output_streams; tmp; tmp = tmp->next) { |
| DecodebinOutputStream *output = (DecodebinOutputStream *) tmp->data; |
| free_output_stream (dbin, output); |
| } |
| g_list_free (dbin->output_streams); |
| dbin->output_streams = NULL; |
| /* Free multiqueue slots */ |
| for (tmp = dbin->slots; tmp; tmp = tmp->next) { |
| MultiQueueSlot *slot = (MultiQueueSlot *) tmp->data; |
| free_multiqueue_slot (dbin, slot); |
| } |
| g_list_free (dbin->slots); |
| dbin->slots = NULL; |
| dbin->current_group_id = GST_GROUP_ID_INVALID; |
| /* Free inputs */ |
| } |
| break; |
| default: |
| break; |
| } |
| beach: |
| return ret; |
| } |
| |
| gboolean |
| gst_decodebin3_plugin_init (GstPlugin * plugin) |
| { |
| GST_DEBUG_CATEGORY_INIT (decodebin3_debug, "decodebin3", 0, "decoder bin"); |
| |
| return gst_element_register (plugin, "decodebin3", GST_RANK_NONE, |
| GST_TYPE_DECODEBIN3); |
| } |