blob: 7650a64e4d9a01f6f7d16e15a40e709362e7a5f5 [file] [log] [blame]
# Makefile.in generated by automake 1.14.1 from Makefile.am.
# @configure_input@
# Copyright (C) 1994-2013 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
@SET_MAKE@
# this snippet is to be included by both our docbook manuals
# and gtk-doc API references
# it adds an upload target to each of these dir's Makefiles
# each Makefile.am should define the following variables:
# - DOC: the base name of the documentation
# (faq, manual, pwg, gstreamer, gstreamer-libs)
# - FORMATS: the formats in which DOC is output
# (html ps pdf)
# if you want to use it, make sure your $HOME/.ssh/config file contains the
# correct User entry for the Host entry for the DOC_SERVER
# This is an include file specifically tuned for building documentation
# for GStreamer plug-ins
VPATH = @srcdir@
am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
am__make_running_with_option = \
case $${target_option-} in \
?) ;; \
*) echo "am__make_running_with_option: internal error: invalid" \
"target option '$${target_option-}' specified" >&2; \
exit 1;; \
esac; \
has_opt=no; \
sane_makeflags=$$MAKEFLAGS; \
if $(am__is_gnu_make); then \
sane_makeflags=$$MFLAGS; \
else \
case $$MAKEFLAGS in \
*\\[\ \ ]*) \
bs=\\; \
sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
| sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
esac; \
fi; \
skip_next=no; \
strip_trailopt () \
{ \
flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
}; \
for flg in $$sane_makeflags; do \
test $$skip_next = yes && { skip_next=no; continue; }; \
case $$flg in \
*=*|--*) continue;; \
-*I) strip_trailopt 'I'; skip_next=yes;; \
-*I?*) strip_trailopt 'I';; \
-*O) strip_trailopt 'O'; skip_next=yes;; \
-*O?*) strip_trailopt 'O';; \
-*l) strip_trailopt 'l'; skip_next=yes;; \
-*l?*) strip_trailopt 'l';; \
-[dEDm]) skip_next=yes;; \
-[JT]) skip_next=yes;; \
esac; \
case $$flg in \
*$$target_option*) has_opt=yes; break;; \
esac; \
done; \
test $$has_opt = yes
am__make_dryrun = (target_option=n; $(am__make_running_with_option))
am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
target_triplet = @target@
DIST_COMMON = $(top_srcdir)/common/upload-doc.mak \
$(top_srcdir)/common/gtk-doc-plugins.mak $(srcdir)/Makefile.in \
$(srcdir)/Makefile.am
subdir = docs/plugins
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/common/m4/as-ac-expand.m4 \
$(top_srcdir)/common/m4/as-auto-alt.m4 \
$(top_srcdir)/common/m4/as-compiler-flag.m4 \
$(top_srcdir)/common/m4/as-libtool.m4 \
$(top_srcdir)/common/m4/as-version.m4 \
$(top_srcdir)/common/m4/ax_create_stdint_h.m4 \
$(top_srcdir)/common/m4/gst-arch.m4 \
$(top_srcdir)/common/m4/gst-args.m4 \
$(top_srcdir)/common/m4/gst-check.m4 \
$(top_srcdir)/common/m4/gst-default.m4 \
$(top_srcdir)/common/m4/gst-dowhile.m4 \
$(top_srcdir)/common/m4/gst-error.m4 \
$(top_srcdir)/common/m4/gst-feature.m4 \
$(top_srcdir)/common/m4/gst-gettext.m4 \
$(top_srcdir)/common/m4/gst-glib2.m4 \
$(top_srcdir)/common/m4/gst-package-release-datetime.m4 \
$(top_srcdir)/common/m4/gst-platform.m4 \
$(top_srcdir)/common/m4/gst-plugin-docs.m4 \
$(top_srcdir)/common/m4/gst-plugindir.m4 \
$(top_srcdir)/common/m4/gst-x11.m4 \
$(top_srcdir)/common/m4/gst.m4 \
$(top_srcdir)/common/m4/gtk-doc.m4 \
$(top_srcdir)/common/m4/introspection.m4 \
$(top_srcdir)/common/m4/orc.m4 $(top_srcdir)/common/m4/pkg.m4 \
$(top_srcdir)/m4/gettext.m4 $(top_srcdir)/m4/gsettings.m4 \
$(top_srcdir)/m4/gst-fionread.m4 $(top_srcdir)/m4/gst-sdl.m4 \
$(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/intlmacosx.m4 \
$(top_srcdir)/m4/lib-ld.m4 $(top_srcdir)/m4/lib-link.m4 \
$(top_srcdir)/m4/lib-prefix.m4 $(top_srcdir)/m4/libgcrypt.m4 \
$(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
$(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
$(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/nls.m4 \
$(top_srcdir)/m4/po.m4 $(top_srcdir)/m4/progtest.m4 \
$(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
AM_V_P = $(am__v_P_@AM_V@)
am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
am__v_P_0 = false
am__v_P_1 = :
AM_V_GEN = $(am__v_GEN_@AM_V@)
am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
am__v_GEN_0 = @echo " GEN " $@;
am__v_GEN_1 =
AM_V_at = $(am__v_at_@AM_V@)
am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
am__v_at_0 = @
am__v_at_1 =
SOURCES =
DIST_SOURCES =
RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
ctags-recursive dvi-recursive html-recursive info-recursive \
install-data-recursive install-dvi-recursive \
install-exec-recursive install-html-recursive \
install-info-recursive install-pdf-recursive \
install-ps-recursive install-recursive installcheck-recursive \
installdirs-recursive pdf-recursive ps-recursive \
tags-recursive uninstall-recursive
am__can_run_installinfo = \
case $$AM_UPDATE_INFO_DIR in \
n|no|NO) false;; \
*) (install-info --version) >/dev/null 2>&1;; \
esac
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
distclean-recursive maintainer-clean-recursive
am__recursive_targets = \
$(RECURSIVE_TARGETS) \
$(RECURSIVE_CLEAN_TARGETS) \
$(am__extra_recursive_targets)
AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
distdir
am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
# Read a list of newline-separated strings from the standard input,
# and print each of them once, without duplicates. Input order is
# *not* preserved.
am__uniquify_input = $(AWK) '\
BEGIN { nonempty = 0; } \
{ items[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in items) print i; }; } \
'
# Make sure the list of sources is unique. This is necessary because,
# e.g., the same source file might be shared among _SOURCES variables
# for different programs/libraries.
am__define_uniq_tagged_files = \
list='$(am__tagged_files)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | $(am__uniquify_input)`
ETAGS = etags
CTAGS = ctags
DIST_SUBDIRS = $(SUBDIRS)
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
am__relativize = \
dir0=`pwd`; \
sed_first='s,^\([^/]*\)/.*$$,\1,'; \
sed_rest='s,^[^/]*/*,,'; \
sed_last='s,^.*/\([^/]*\)$$,\1,'; \
sed_butlast='s,/*[^/]*$$,,'; \
while test -n "$$dir1"; do \
first=`echo "$$dir1" | sed -e "$$sed_first"`; \
if test "$$first" != "."; then \
if test "$$first" = ".."; then \
dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
else \
first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
if test "$$first2" = "$$first"; then \
dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
else \
dir2="../$$dir2"; \
fi; \
dir0="$$dir0"/"$$first"; \
fi; \
fi; \
dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
done; \
reldir="$$dir2"
ACLOCAL = @ACLOCAL@
ACLOCAL_AMFLAGS = @ACLOCAL_AMFLAGS@
ACMENC_CFLAGS = @ACMENC_CFLAGS@
ACMMP3DEC_CFLAGS = @ACMMP3DEC_CFLAGS@
AMTAR = @AMTAR@
AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
APEXSINK_CFLAGS = @APEXSINK_CFLAGS@
APEXSINK_LIBS = @APEXSINK_LIBS@
AR = @AR@
AS = @AS@
ASSRENDER_CFLAGS = @ASSRENDER_CFLAGS@
ASSRENDER_LIBS = @ASSRENDER_LIBS@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
BLUEZ_CFLAGS = @BLUEZ_CFLAGS@
BLUEZ_LIBS = @BLUEZ_LIBS@
BZ2_LIBS = @BZ2_LIBS@
CC = @CC@
CCASFLAGS = @CCASFLAGS@
CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@
CHROMAPRINT_CFLAGS = @CHROMAPRINT_CFLAGS@
CHROMAPRINT_LIBS = @CHROMAPRINT_LIBS@
CLUTTER_CFLAGS = @CLUTTER_CFLAGS@
CLUTTER_GLX_CFLAGS = @CLUTTER_GLX_CFLAGS@
CLUTTER_GLX_LIBS = @CLUTTER_GLX_LIBS@
CLUTTER_LIBS = @CLUTTER_LIBS@
CLUTTER_X11_CFLAGS = @CLUTTER_X11_CFLAGS@
CLUTTER_X11_LIBS = @CLUTTER_X11_LIBS@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CURL_CFLAGS = @CURL_CFLAGS@
CURL_LIBS = @CURL_LIBS@
CXX = @CXX@
CXXCPP = @CXXCPP@
CXXDEPMODE = @CXXDEPMODE@
CXXFLAGS = @CXXFLAGS@
CYGPATH_W = @CYGPATH_W@
DAALA_CFLAGS = @DAALA_CFLAGS@
DAALA_LIBS = @DAALA_LIBS@
DBUS_CFLAGS = @DBUS_CFLAGS@
DBUS_LIBS = @DBUS_LIBS@
DCCP_LIBS = @DCCP_LIBS@
DECKLINK_CXXFLAGS = @DECKLINK_CXXFLAGS@
DECKLINK_LIBS = @DECKLINK_LIBS@
DEFAULT_AUDIOSINK = @DEFAULT_AUDIOSINK@
DEFAULT_AUDIOSRC = @DEFAULT_AUDIOSRC@
DEFAULT_VIDEOSINK = @DEFAULT_VIDEOSINK@
DEFAULT_VIDEOSRC = @DEFAULT_VIDEOSRC@
DEFAULT_VISUALIZER = @DEFAULT_VISUALIZER@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
DEPRECATED_CFLAGS = @DEPRECATED_CFLAGS@
DIRECT3D_LIBS = @DIRECT3D_LIBS@
DIRECTDRAW_LIBS = @DIRECTDRAW_LIBS@
DIRECTFB_CFLAGS = @DIRECTFB_CFLAGS@
DIRECTFB_LIBS = @DIRECTFB_LIBS@
DIRECTSOUND_LIBS = @DIRECTSOUND_LIBS@
DIRECTX_CFLAGS = @DIRECTX_CFLAGS@
DIRECTX_LDFLAGS = @DIRECTX_LDFLAGS@
DLLTOOL = @DLLTOOL@
DSYMUTIL = @DSYMUTIL@
DTS_LIBS = @DTS_LIBS@
DUMPBIN = @DUMPBIN@
DVDNAV_CFLAGS = @DVDNAV_CFLAGS@
DVDNAV_LIBS = @DVDNAV_LIBS@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
ERROR_CFLAGS = @ERROR_CFLAGS@
ERROR_CXXFLAGS = @ERROR_CXXFLAGS@
ERROR_OBJCFLAGS = @ERROR_OBJCFLAGS@
EXEEXT = @EXEEXT@
EXIF_CFLAGS = @EXIF_CFLAGS@
EXIF_LIBS = @EXIF_LIBS@
FAAC_LIBS = @FAAC_LIBS@
FAAD_IS_NEAAC = @FAAD_IS_NEAAC@
FAAD_LIBS = @FAAD_LIBS@
FFLAGS = @FFLAGS@
FGREP = @FGREP@
FLITE_CFLAGS = @FLITE_CFLAGS@
FLITE_LIBS = @FLITE_LIBS@
FLUIDSYNTH_CFLAGS = @FLUIDSYNTH_CFLAGS@
FLUIDSYNTH_LIBS = @FLUIDSYNTH_LIBS@
GCOV = @GCOV@
GCOV_CFLAGS = @GCOV_CFLAGS@
GCOV_LIBS = @GCOV_LIBS@
GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
GETTEXT_PACKAGE = @GETTEXT_PACKAGE@
GIO_CFLAGS = @GIO_CFLAGS@
GIO_LDFLAGS = @GIO_LDFLAGS@
GIO_LIBS = @GIO_LIBS@
GLIB_CFLAGS = @GLIB_CFLAGS@
GLIB_COMPILE_SCHEMAS = @GLIB_COMPILE_SCHEMAS@
GLIB_EXTRA_CFLAGS = @GLIB_EXTRA_CFLAGS@
GLIB_GENMARSHAL = @GLIB_GENMARSHAL@
GLIB_LIBS = @GLIB_LIBS@
GLIB_MKENUMS = @GLIB_MKENUMS@
GLIB_PREFIX = @GLIB_PREFIX@
GLIB_REQ = @GLIB_REQ@
GL_CFLAGS = @GL_CFLAGS@
GL_LIBS = @GL_LIBS@
GL_OBJCFLAGS = @GL_OBJCFLAGS@
GME_LIBS = @GME_LIBS@
GMODULE_EXPORT_CFLAGS = @GMODULE_EXPORT_CFLAGS@
GMODULE_EXPORT_LIBS = @GMODULE_EXPORT_LIBS@
GMODULE_NO_EXPORT_CFLAGS = @GMODULE_NO_EXPORT_CFLAGS@
GMODULE_NO_EXPORT_LIBS = @GMODULE_NO_EXPORT_LIBS@
GMSGFMT = @GMSGFMT@
GMSGFMT_015 = @GMSGFMT_015@
GMYTH_CFLAGS = @GMYTH_CFLAGS@
GMYTH_LIBS = @GMYTH_LIBS@
GRAPHENE_CFLAGS = @GRAPHENE_CFLAGS@
GRAPHENE_LIBS = @GRAPHENE_LIBS@
GREP = @GREP@
GSETTINGS_CFLAGS = @GSETTINGS_CFLAGS@
GSETTINGS_DISABLE_SCHEMAS_COMPILE = @GSETTINGS_DISABLE_SCHEMAS_COMPILE@
GSETTINGS_LIBS = @GSETTINGS_LIBS@
GSM_LIBS = @GSM_LIBS@
GSTPB_PLUGINS_DIR = @GSTPB_PLUGINS_DIR@
GSTPB_PREFIX = @GSTPB_PREFIX@
GST_AGE = @GST_AGE@
GST_ALL_LDFLAGS = @GST_ALL_LDFLAGS@
GST_API_VERSION = @GST_API_VERSION@
GST_BASE_CFLAGS = @GST_BASE_CFLAGS@
GST_BASE_LIBS = @GST_BASE_LIBS@
GST_CFLAGS = @GST_CFLAGS@
GST_CHECK_CFLAGS = @GST_CHECK_CFLAGS@
GST_CHECK_LIBS = @GST_CHECK_LIBS@
GST_CONTROLLER_CFLAGS = @GST_CONTROLLER_CFLAGS@
GST_CONTROLLER_LIBS = @GST_CONTROLLER_LIBS@
GST_CURRENT = @GST_CURRENT@
GST_CXXFLAGS = @GST_CXXFLAGS@
GST_LEVEL_DEFAULT = @GST_LEVEL_DEFAULT@
GST_LIBS = @GST_LIBS@
GST_LIBVERSION = @GST_LIBVERSION@
GST_LIB_LDFLAGS = @GST_LIB_LDFLAGS@
GST_LICENSE = @GST_LICENSE@
GST_LT_LDFLAGS = @GST_LT_LDFLAGS@
GST_OBJCFLAGS = @GST_OBJCFLAGS@
GST_OPTION_CFLAGS = @GST_OPTION_CFLAGS@
GST_OPTION_CXXFLAGS = @GST_OPTION_CXXFLAGS@
GST_OPTION_OBJCFLAGS = @GST_OPTION_OBJCFLAGS@
GST_PACKAGE_NAME = @GST_PACKAGE_NAME@
GST_PACKAGE_ORIGIN = @GST_PACKAGE_ORIGIN@
GST_PKG_CONFIG_PATH = @GST_PKG_CONFIG_PATH@
GST_PLUGINS_ALL = @GST_PLUGINS_ALL@
GST_PLUGINS_BAD_CFLAGS = @GST_PLUGINS_BAD_CFLAGS@
GST_PLUGINS_BAD_CXXFLAGS = @GST_PLUGINS_BAD_CXXFLAGS@
GST_PLUGINS_BAD_OBJCFLAGS = @GST_PLUGINS_BAD_OBJCFLAGS@
GST_PLUGINS_BASE_CFLAGS = @GST_PLUGINS_BASE_CFLAGS@
GST_PLUGINS_BASE_DIR = @GST_PLUGINS_BASE_DIR@
GST_PLUGINS_BASE_LIBS = @GST_PLUGINS_BASE_LIBS@
GST_PLUGINS_DIR = @GST_PLUGINS_DIR@
GST_PLUGINS_GOOD_CFLAGS = @GST_PLUGINS_GOOD_CFLAGS@
GST_PLUGINS_GOOD_DIR = @GST_PLUGINS_GOOD_DIR@
GST_PLUGINS_GOOD_LIBS = @GST_PLUGINS_GOOD_LIBS@
GST_PLUGINS_LIBAV_CFLAGS = @GST_PLUGINS_LIBAV_CFLAGS@
GST_PLUGINS_LIBAV_DIR = @GST_PLUGINS_LIBAV_DIR@
GST_PLUGINS_LIBAV_LIBS = @GST_PLUGINS_LIBAV_LIBS@
GST_PLUGINS_NONPORTED = @GST_PLUGINS_NONPORTED@
GST_PLUGINS_SELECTED = @GST_PLUGINS_SELECTED@
GST_PLUGINS_UGLY_CFLAGS = @GST_PLUGINS_UGLY_CFLAGS@
GST_PLUGINS_UGLY_DIR = @GST_PLUGINS_UGLY_DIR@
GST_PLUGINS_UGLY_LIBS = @GST_PLUGINS_UGLY_LIBS@
GST_PLUGIN_LDFLAGS = @GST_PLUGIN_LDFLAGS@
GST_PLUGIN_LIBTOOLFLAGS = @GST_PLUGIN_LIBTOOLFLAGS@
GST_PREFIX = @GST_PREFIX@
GST_REVISION = @GST_REVISION@
GST_TOOLS_DIR = @GST_TOOLS_DIR@
GST_VIDEO_CFLAGS = @GST_VIDEO_CFLAGS@
GST_VIDEO_LIBS = @GST_VIDEO_LIBS@
GTK3_CFLAGS = @GTK3_CFLAGS@
GTK3_LIBS = @GTK3_LIBS@
GTKDOC_CHECK = @GTKDOC_CHECK@
GTKDOC_DEPS_CFLAGS = @GTKDOC_DEPS_CFLAGS@
GTKDOC_DEPS_LIBS = @GTKDOC_DEPS_LIBS@
GTKDOC_MKPDF = @GTKDOC_MKPDF@
GTKDOC_REBASE = @GTKDOC_REBASE@
GTK_BASE_DIR = @GTK_BASE_DIR@
GTK_CFLAGS = @GTK_CFLAGS@
GTK_LIBS = @GTK_LIBS@
GTK_VERSION = @GTK_VERSION@
G_UDEV_CFLAGS = @G_UDEV_CFLAGS@
G_UDEV_LIBS = @G_UDEV_LIBS@
HAVE_CLUTTER = @HAVE_CLUTTER@
HAVE_CLUTTER_GLX = @HAVE_CLUTTER_GLX@
HAVE_CLUTTER_X11 = @HAVE_CLUTTER_X11@
HAVE_CXX = @HAVE_CXX@
HAVE_DIRECT3D = @HAVE_DIRECT3D@
HAVE_DIRECTDRAW = @HAVE_DIRECTDRAW@
HAVE_DIRECTSOUND = @HAVE_DIRECTSOUND@
HAVE_DTS = @HAVE_DTS@
HAVE_EGL = @HAVE_EGL@
HAVE_FAAC = @HAVE_FAAC@
HAVE_FAAD = @HAVE_FAAD@
HAVE_FLITE = @HAVE_FLITE@
HAVE_GL = @HAVE_GL@
HAVE_GLES2 = @HAVE_GLES2@
HAVE_GLU = @HAVE_GLU@
HAVE_GRAPHENE = @HAVE_GRAPHENE@
HAVE_GSM = @HAVE_GSM@
HAVE_GTK3 = @HAVE_GTK3@
HAVE_JPEG = @HAVE_JPEG@
HAVE_NAS = @HAVE_NAS@
HAVE_OPENJPEG = @HAVE_OPENJPEG@
HAVE_PNG = @HAVE_PNG@
HAVE_SRTP = @HAVE_SRTP@
HAVE_WASAPI = @HAVE_WASAPI@
HAVE_WILDMIDI = @HAVE_WILDMIDI@
HAVE_WINKS = @HAVE_WINKS@
HAVE_WINSCREENCAP = @HAVE_WINSCREENCAP@
HAVE_X = @HAVE_X@
HAVE_X11 = @HAVE_X11@
HTML_DIR = @HTML_DIR@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
INTLLIBS = @INTLLIBS@
INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
INTROSPECTION_CFLAGS = @INTROSPECTION_CFLAGS@
INTROSPECTION_COMPILER = @INTROSPECTION_COMPILER@
INTROSPECTION_GENERATE = @INTROSPECTION_GENERATE@
INTROSPECTION_GIRDIR = @INTROSPECTION_GIRDIR@
INTROSPECTION_LIBS = @INTROSPECTION_LIBS@
INTROSPECTION_MAKEFILE = @INTROSPECTION_MAKEFILE@
INTROSPECTION_SCANNER = @INTROSPECTION_SCANNER@
INTROSPECTION_TYPELIBDIR = @INTROSPECTION_TYPELIBDIR@
JPEG_LIBS = @JPEG_LIBS@
KATE_CFLAGS = @KATE_CFLAGS@
KATE_LIBS = @KATE_LIBS@
LD = @LD@
LDFLAGS = @LDFLAGS@
LIBDC1394_CFLAGS = @LIBDC1394_CFLAGS@
LIBDC1394_LIBS = @LIBDC1394_LIBS@
LIBDIR = @LIBDIR@
LIBGCRYPT_CFLAGS = @LIBGCRYPT_CFLAGS@
LIBGCRYPT_CONFIG = @LIBGCRYPT_CONFIG@
LIBGCRYPT_LIBS = @LIBGCRYPT_LIBS@
LIBICONV = @LIBICONV@
LIBINTL = @LIBINTL@
LIBM = @LIBM@
LIBMMS_CFLAGS = @LIBMMS_CFLAGS@
LIBMMS_LIBS = @LIBMMS_LIBS@
LIBOBJS = @LIBOBJS@
LIBPNG_CFLAGS = @LIBPNG_CFLAGS@
LIBPNG_LIBS = @LIBPNG_LIBS@
LIBS = @LIBS@
LIBTOOL = @LIBTOOL@
LIBUDEV_CFLAGS = @LIBUDEV_CFLAGS@
LIBUDEV_LIBS = @LIBUDEV_LIBS@
LIBUSB_CFLAGS = @LIBUSB_CFLAGS@
LIBUSB_LIBS = @LIBUSB_LIBS@
LIBVISUAL_CFLAGS = @LIBVISUAL_CFLAGS@
LIBVISUAL_LIBS = @LIBVISUAL_LIBS@
LIBXML2_CFLAGS = @LIBXML2_CFLAGS@
LIBXML2_LIBS = @LIBXML2_LIBS@
LIPO = @LIPO@
LN_S = @LN_S@
LOCALEDIR = @LOCALEDIR@
LRDF_CFLAGS = @LRDF_CFLAGS@
LRDF_LIBS = @LRDF_LIBS@
LTLIBICONV = @LTLIBICONV@
LTLIBINTL = @LTLIBINTL@
LTLIBOBJS = @LTLIBOBJS@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
MANIFEST_TOOL = @MANIFEST_TOOL@
MIMIC_CFLAGS = @MIMIC_CFLAGS@
MIMIC_LIBS = @MIMIC_LIBS@
MJPEG_CFLAGS = @MJPEG_CFLAGS@
MJPEG_LIBS = @MJPEG_LIBS@
MKDIR_P = @MKDIR_P@
MODPLUG_CFLAGS = @MODPLUG_CFLAGS@
MODPLUG_LIBS = @MODPLUG_LIBS@
MPEG2ENC_CFLAGS = @MPEG2ENC_CFLAGS@
MPEG2ENC_LIBS = @MPEG2ENC_LIBS@
MPG123_CFLAGS = @MPG123_CFLAGS@
MPG123_LIBS = @MPG123_LIBS@
MPLEX_CFLAGS = @MPLEX_CFLAGS@
MPLEX_LDFLAGS = @MPLEX_LDFLAGS@
MPLEX_LIBS = @MPLEX_LIBS@
MSGFMT = @MSGFMT@
MSGFMT_015 = @MSGFMT_015@
MSGMERGE = @MSGMERGE@
MUSEPACK_LIBS = @MUSEPACK_LIBS@
NAS_CFLAGS = @NAS_CFLAGS@
NAS_LIBS = @NAS_LIBS@
NEON_CFLAGS = @NEON_CFLAGS@
NEON_LIBS = @NEON_LIBS@
NETTLE_CFLAGS = @NETTLE_CFLAGS@
NETTLE_LIBS = @NETTLE_LIBS@
NM = @NM@
NMEDIT = @NMEDIT@
OBJC = @OBJC@
OBJCDEPMODE = @OBJCDEPMODE@
OBJCFLAGS = @OBJCFLAGS@
OBJDUMP = @OBJDUMP@
OBJEXT = @OBJEXT@
OFA_CFLAGS = @OFA_CFLAGS@
OFA_LIBS = @OFA_LIBS@
OPENAL_CFLAGS = @OPENAL_CFLAGS@
OPENAL_LIBS = @OPENAL_LIBS@
OPENCV_CFLAGS = @OPENCV_CFLAGS@
OPENCV_LIBS = @OPENCV_LIBS@
OPENCV_PREFIX = @OPENCV_PREFIX@
OPENEXR_CFLAGS = @OPENEXR_CFLAGS@
OPENEXR_LIBS = @OPENEXR_LIBS@
OPENJPEG_CFLAGS = @OPENJPEG_CFLAGS@
OPENJPEG_LIBS = @OPENJPEG_LIBS@
OPENNI2_CFLAGS = @OPENNI2_CFLAGS@
OPENNI2_LIBS = @OPENNI2_LIBS@
OPUS_CFLAGS = @OPUS_CFLAGS@
OPUS_LIBS = @OPUS_LIBS@
ORCC = @ORCC@
ORCC_FLAGS = @ORCC_FLAGS@
ORC_CFLAGS = @ORC_CFLAGS@
ORC_LIBS = @ORC_LIBS@
OTOOL = @OTOOL@
OTOOL64 = @OTOOL64@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PACKAGE_VERSION_MAJOR = @PACKAGE_VERSION_MAJOR@
PACKAGE_VERSION_MICRO = @PACKAGE_VERSION_MICRO@
PACKAGE_VERSION_MINOR = @PACKAGE_VERSION_MINOR@
PACKAGE_VERSION_NANO = @PACKAGE_VERSION_NANO@
PACKAGE_VERSION_RELEASE = @PACKAGE_VERSION_RELEASE@
PATH_SEPARATOR = @PATH_SEPARATOR@
PKG_CONFIG = @PKG_CONFIG@
PLUGINDIR = @PLUGINDIR@
POSUB = @POSUB@
PROFILE_CFLAGS = @PROFILE_CFLAGS@
PVR_CFLAGS = @PVR_CFLAGS@
PVR_LIBS = @PVR_LIBS@
PYTHON = @PYTHON@
PYTHON_EXEC_PREFIX = @PYTHON_EXEC_PREFIX@
PYTHON_PLATFORM = @PYTHON_PLATFORM@
PYTHON_PREFIX = @PYTHON_PREFIX@
PYTHON_VERSION = @PYTHON_VERSION@
RANLIB = @RANLIB@
RSVG_2_36_2_CFLAGS = @RSVG_2_36_2_CFLAGS@
RSVG_2_36_2_LIBS = @RSVG_2_36_2_LIBS@
RSVG_CFLAGS = @RSVG_CFLAGS@
RSVG_LIBS = @RSVG_LIBS@
RTMP_CFLAGS = @RTMP_CFLAGS@
RTMP_LIBS = @RTMP_LIBS@
SBC_CFLAGS = @SBC_CFLAGS@
SBC_LIBS = @SBC_LIBS@
SCHRO_CFLAGS = @SCHRO_CFLAGS@
SCHRO_LIBS = @SCHRO_LIBS@
SDL_CFLAGS = @SDL_CFLAGS@
SDL_CLUTTER = @SDL_CLUTTER@
SDL_CONFIG = @SDL_CONFIG@
SDL_LIBS = @SDL_LIBS@
SED = @SED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
SHM_LIBS = @SHM_LIBS@
SLV2_CFLAGS = @SLV2_CFLAGS@
SLV2_LIBS = @SLV2_LIBS@
SNDFILE_CFLAGS = @SNDFILE_CFLAGS@
SNDFILE_LIBS = @SNDFILE_LIBS@
SNDIO_LIBS = @SNDIO_LIBS@
SOUNDTOUCH_CFLAGS = @SOUNDTOUCH_CFLAGS@
SOUNDTOUCH_LIBS = @SOUNDTOUCH_LIBS@
SPANDSP_CFLAGS = @SPANDSP_CFLAGS@
SPANDSP_LIBS = @SPANDSP_LIBS@
SPC_LIBS = @SPC_LIBS@
SRTP_LIBS = @SRTP_LIBS@
SSH2_CFLAGS = @SSH2_CFLAGS@
SSH2_LIBS = @SSH2_LIBS@
STRIP = @STRIP@
TELETEXTDEC_CFLAGS = @TELETEXTDEC_CFLAGS@
TELETEXTDEC_LIBS = @TELETEXTDEC_LIBS@
TIGER_CFLAGS = @TIGER_CFLAGS@
TIGER_LIBS = @TIGER_LIBS@
TIMIDITY_CFLAGS = @TIMIDITY_CFLAGS@
TIMIDITY_LIBS = @TIMIDITY_LIBS@
USE_GLES2 = @USE_GLES2@
USE_NLS = @USE_NLS@
USE_OPENGL = @USE_OPENGL@
VALGRIND_CFLAGS = @VALGRIND_CFLAGS@
VALGRIND_LIBS = @VALGRIND_LIBS@
VALGRIND_PATH = @VALGRIND_PATH@
VDPAU_CFLAGS = @VDPAU_CFLAGS@
VDPAU_LIBS = @VDPAU_LIBS@
VERSION = @VERSION@
VOAACENC_CFLAGS = @VOAACENC_CFLAGS@
VOAACENC_LIBS = @VOAACENC_LIBS@
VOAMRWBENC_CFLAGS = @VOAMRWBENC_CFLAGS@
VOAMRWBENC_LIBS = @VOAMRWBENC_LIBS@
WARNING_CFLAGS = @WARNING_CFLAGS@
WARNING_CXXFLAGS = @WARNING_CXXFLAGS@
WARNING_OBJCFLAGS = @WARNING_OBJCFLAGS@
WASAPI_LIBS = @WASAPI_LIBS@
WAYLAND_CFLAGS = @WAYLAND_CFLAGS@
WAYLAND_EGL_CFLAGS = @WAYLAND_EGL_CFLAGS@
WAYLAND_EGL_LIBS = @WAYLAND_EGL_LIBS@
WAYLAND_LIBS = @WAYLAND_LIBS@
WEBP_CFLAGS = @WEBP_CFLAGS@
WEBP_LIBS = @WEBP_LIBS@
WILDMIDI_CFLAGS = @WILDMIDI_CFLAGS@
WILDMIDI_LIBS = @WILDMIDI_LIBS@
WINKS_LIBS = @WINKS_LIBS@
WINSCREENCAP_LIBS = @WINSCREENCAP_LIBS@
WINSOCK2_LIBS = @WINSOCK2_LIBS@
X11_CFLAGS = @X11_CFLAGS@
X11_LIBS = @X11_LIBS@
XCOMPOSITE_CFLAGS = @XCOMPOSITE_CFLAGS@
XCOMPOSITE_LIBS = @XCOMPOSITE_LIBS@
XGETTEXT = @XGETTEXT@
XGETTEXT_015 = @XGETTEXT_015@
XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
XMKMF = @XMKMF@
XVID_LIBS = @XVID_LIBS@
X_CFLAGS = @X_CFLAGS@
X_EXTRA_LIBS = @X_EXTRA_LIBS@
X_LIBS = @X_LIBS@
X_PRE_LIBS = @X_PRE_LIBS@
ZBAR_CFLAGS = @ZBAR_CFLAGS@
ZBAR_LIBS = @ZBAR_LIBS@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_AR = @ac_ct_AR@
ac_ct_CC = @ac_ct_CC@
ac_ct_CXX = @ac_ct_CXX@
ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
ac_ct_OBJC = @ac_ct_OBJC@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__tar = @am__tar@
am__untar = @am__untar@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
dvidir = @dvidir@
exec_prefix = @exec_prefix@
gsettingsschemadir = @gsettingsschemadir@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
pkgpyexecdir = @pkgpyexecdir@
pkgpythondir = @pkgpythondir@
plugindir = @plugindir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
pyexecdir = @pyexecdir@
pythondir = @pythondir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target = @target@
target_alias = @target_alias@
target_cpu = @target_cpu@
target_os = @target_os@
target_vendor = @target_vendor@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
wayland_scanner = @wayland_scanner@
GST_DOC_SCANOBJ = $(top_srcdir)/common/gstdoc-scangobj
# The name of the module, e.g. 'glib'.
#DOC_MODULE=gst-plugins-libs-@GST_API_VERSION@
MODULE = gst-plugins-bad
DOC_MODULE = $(MODULE)-plugins
# for upload-doc.mak
DOC = $(MODULE)-plugins
FORMATS = html
# these variables define the location of the online docs
DOC_SERVER = gstreamer.freedesktop.org
DOC_BASE = /srv/gstreamer.freedesktop.org/www/data/doc
DOC_URL = $(DOC_SERVER):$(DOC_BASE)
# The top-level SGML file. Change it if you want.
DOC_MAIN_SGML_FILE = $(DOC_MODULE)-docs.sgml
# The directory containing the source code.
# gtk-doc will search all .c & .h files beneath here for inline comments
# documenting functions and macros.
DOC_SOURCE_DIR = $(top_srcdir)/gst $(top_srcdir)/ext $(top_srcdir)/sys
# Extra options to supply to gtkdoc-scan.
SCAN_OPTIONS =
# Extra options to supply to gtkdoc-mkdb.
MKDB_OPTIONS = --sgml-mode --source-suffixes=c,h,cc,m
# Extra options to supply to gtkdoc-fixref.
FIXXREF_OPTIONS = --extra-dir=$(GLIB_PREFIX)/share/gtk-doc/html \
--extra-dir=$(GST_PREFIX)/share/gtk-doc/html \
--extra-dir=$(GSTPB_PREFIX)/share/gtk-doc/html
# Used for dependencies.
HFILE_GLOB = \
$(top_srcdir)/gst/*/*.h $(top_srcdir)/ext/*/*.h $(top_srcdir)/sys/*/*.h \
$(top_srcdir)/ext/*/*.hh
CFILE_GLOB = \
$(top_srcdir)/gst/*/*.c $(top_srcdir)/ext/*/*.c $(top_srcdir)/sys/*/*.c \
$(top_srcdir)/ext/*/*.cc $(top_srcdir)/sys/*/*.m
# Header files to ignore when scanning.
IGNORE_HFILES =
IGNORE_CFILES =
# we add all .h files of elements that have signals/args we want
# sadly this also pulls in the private methods - maybe we should
# move those around in the source ?
#
# also, we should add some stuff here conditionally based on whether
# or not the plugin will actually build
# but I'm not sure about that - it might be this Just Works given that
# the registry won't have the element
# -> it just works (TM) (ensonic)
# FIXME: not ported yet
# $(top_srcdir)/ext/gnomevfs/gstgnomevfssink.c
# example code that needs to be converted to xml and placed in xml/
EXAMPLE_CFILES = \
$(top_srcdir)/ext/directfb/dfb-example.c
EXTRA_HFILES = \
$(top_srcdir)/ext/assrender/gstassrender.h \
$(top_srcdir)/ext/curl/gstcurlbasesink.h \
$(top_srcdir)/ext/curl/gstcurlfilesink.h \
$(top_srcdir)/ext/curl/gstcurlftpsink.h \
$(top_srcdir)/ext/curl/gstcurlhttpsink.h \
$(top_srcdir)/ext/curl/gstcurlsmtpsink.h \
$(top_srcdir)/ext/curl/gstcurltlssink.h \
$(top_srcdir)/ext/dc1394/gstdc1394.h \
$(top_srcdir)/ext/directfb/dfbvideosink.h \
$(top_srcdir)/ext/dts/gstdtsdec.h \
$(top_srcdir)/ext/faac/gstfaac.h \
$(top_srcdir)/ext/faad/gstfaad.h \
$(top_srcdir)/ext/kate/gstkateenc.h \
$(top_srcdir)/ext/kate/gstkatedec.h \
$(top_srcdir)/ext/kate/gstkateparse.h \
$(top_srcdir)/ext/kate/gstkatetag.h \
$(top_srcdir)/ext/kate/gstkatetiger.h \
$(top_srcdir)/ext/ladspa/gstladspa.h \
$(top_srcdir)/ext/mimic/gstmimenc.h \
$(top_srcdir)/ext/mimic/gstmimdec.h \
$(top_srcdir)/ext/modplug/gstmodplug.h \
$(top_srcdir)/ext/mpeg2enc/gstmpeg2enc.hh \
$(top_srcdir)/ext/mplex/gstmplex.hh \
$(top_srcdir)/ext/mythtv/gstmythtvsrc.h \
$(top_srcdir)/ext/opencv/gstcvdilate.h \
$(top_srcdir)/ext/opencv/gstcverode.h \
$(top_srcdir)/ext/opencv/gstcvequalizehist.h \
$(top_srcdir)/ext/opencv/gstcvlaplace.h \
$(top_srcdir)/ext/opencv/gstcvsmooth.h \
$(top_srcdir)/ext/opencv/gstcvsobel.h \
$(top_srcdir)/ext/opencv/gstedgedetect.h \
$(top_srcdir)/ext/opencv/gstfaceblur.h \
$(top_srcdir)/ext/opencv/gstfacedetect.h \
$(top_srcdir)/ext/opencv/gstpyramidsegment.h \
$(top_srcdir)/ext/opencv/gsttemplatematch.h \
$(top_srcdir)/ext/opencv/gsttextoverlay.h \
$(top_srcdir)/ext/openni2/gstopenni2src.h \
$(top_srcdir)/ext/rsvg/gstrsvgdec.h \
$(top_srcdir)/ext/rsvg/gstrsvgoverlay.h \
$(top_srcdir)/ext/spandsp/gstspanplc.h \
$(top_srcdir)/ext/spandsp/gstdtmfdetect.h \
$(top_srcdir)/ext/sdl/sdlaudiosink.h \
$(top_srcdir)/ext/sdl/sdlvideosink.h \
$(top_srcdir)/ext/timidity/gsttimidity.h \
$(top_srcdir)/ext/timidity/gstwildmidi.h \
$(top_srcdir)/ext/voaacenc/gstvoaacenc.h \
$(top_srcdir)/ext/voamrwbenc/gstvoamrwbenc.h \
$(top_srcdir)/ext/zbar/gstzbar.h \
$(top_srcdir)/gst/aiff/aiffparse.h \
$(top_srcdir)/gst/aiff/aiffmux.h \
$(top_srcdir)/gst/autoconvert/gstautoconvert.h \
$(top_srcdir)/gst/audiovisualizers/gstaudiovisualizer.h \
$(top_srcdir)/gst/audiovisualizers/gstspacescope.h \
$(top_srcdir)/gst/audiovisualizers/gstspectrascope.h \
$(top_srcdir)/gst/audiovisualizers/gstsynaescope.h \
$(top_srcdir)/gst/audiovisualizers/gstwavescope.h \
$(top_srcdir)/gst/camerabin2/gstcamerabin2.h \
$(top_srcdir)/gst/coloreffects/gstcoloreffects.h \
$(top_srcdir)/gst/dataurisrc/gstdataurisrc.h \
$(top_srcdir)/gst/dccp/gstdccpclientsink.h \
$(top_srcdir)/gst/dccp/gstdccpclientsrc.h \
$(top_srcdir)/gst/dccp/gstdccpserversink.h \
$(top_srcdir)/gst/dccp/gstdccpserversrc.h \
$(top_srcdir)/gst/debugutils/fpsdisplaysink.h \
$(top_srcdir)/gst/dvdspu/gstdvdspu.h \
$(top_srcdir)/gst/festival/gstfestival.h \
$(top_srcdir)/gst/gaudieffects/gstburn.h \
$(top_srcdir)/gst/gaudieffects/gstchromium.h \
$(top_srcdir)/gst/gaudieffects/gstdilate.h \
$(top_srcdir)/gst/gaudieffects/gstdodge.h \
$(top_srcdir)/gst/gaudieffects/gstexclusion.h \
$(top_srcdir)/gst/gaudieffects/gstgaussblur.h \
$(top_srcdir)/gst/gaudieffects/gstplugin.h \
$(top_srcdir)/gst/gaudieffects/gstsolarize.h \
$(top_srcdir)/gst/geometrictransform/gstbulge.h \
$(top_srcdir)/gst/geometrictransform/gstcircle.h \
$(top_srcdir)/gst/geometrictransform/gstdiffuse.h \
$(top_srcdir)/gst/geometrictransform/gstfisheye.h \
$(top_srcdir)/gst/geometrictransform/gstkaleidoscope.h \
$(top_srcdir)/gst/geometrictransform/gstmarble.h \
$(top_srcdir)/gst/geometrictransform/gstmirror.h \
$(top_srcdir)/gst/geometrictransform/gstpinch.h \
$(top_srcdir)/gst/geometrictransform/gstsphere.h \
$(top_srcdir)/gst/geometrictransform/gstsquare.h \
$(top_srcdir)/gst/geometrictransform/gststretch.h \
$(top_srcdir)/gst/geometrictransform/gsttunnel.h \
$(top_srcdir)/gst/geometrictransform/gsttwirl.h \
$(top_srcdir)/gst/geometrictransform/gstwaterripple.h \
$(top_srcdir)/gst/ivfparse/gstivfparse.h \
$(top_srcdir)/gst/jpegformat/gstjpegparse.h \
$(top_srcdir)/gst/liveadder/liveadder.h \
$(top_srcdir)/gst/mxf/mxfdemux.h \
$(top_srcdir)/gst/mxf/mxfmux.h \
$(top_srcdir)/gst/nuvdemux/gstnuvdemux.h \
$(top_srcdir)/gst/pcapparse/gstpcapparse.h \
$(top_srcdir)/gst/rawparse/gstaudioparse.h \
$(top_srcdir)/gst/rawparse/gstvideoparse.h \
$(top_srcdir)/gst/sdp/gstsdpdemux.h \
$(top_srcdir)/gst/speed/gstspeed.h \
$(top_srcdir)/gst/stereo/gststereo.h \
$(top_srcdir)/gst/videosignal/gstvideoanalyse.h \
$(top_srcdir)/sys/directdraw/gstdirectdrawsink.h \
$(top_srcdir)/sys/dvb/gstdvbsrc.h \
$(top_srcdir)/sys/shm/gstshmsink.h \
$(top_srcdir)/sys/shm/gstshmsrc.h \
$(top_srcdir)/gst-libs/gst/interfaces/photography.h
# Images to copy into HTML directory.
HTML_IMAGES = camerabin.png
# Extra SGML files that are included by $(DOC_MAIN_SGML_FILE).
content_files =
# Other files to distribute.
extra_files =
# CFLAGS and LDFLAGS for compiling scan program. Only needed if your app/lib
# contains GtkObjects/GObjects and you want to document signals and properties.
GTKDOC_CFLAGS = -DGST_USE_UNSTABLE_API $(GST_PLUGINS_BAD_CFLAGS) $(GST_BASE_CFLAGS) -I$(top_builddir)
GTKDOC_LIBS = \
$(top_builddir)/gst-libs/gst/interfaces/libgstphotography-@GST_API_VERSION@.la \
$(GST_BASE_LIBS)
GTKDOC_CC = $(LIBTOOL) --tag=CC --mode=compile $(CC)
GTKDOC_LD = $(LIBTOOL) --tag=CC --mode=link $(CC)
# If you need to override some of the declarations, place them in this file
# and uncomment this line.
#DOC_OVERRIDES = $(DOC_MODULE)-overrides.txt
DOC_OVERRIDES =
# We set GPATH here; this gives us semantics for GNU make
# which are more like other make's VPATH, when it comes to
# whether a source that is a target of one rule is then
# searched for in VPATH/GPATH.
#
GPATH = $(srcdir)
# thomas: make docs parallel installable
TARGET_DIR = $(HTML_DIR)/$(DOC_MODULE)-@GST_API_VERSION@
MAINTAINER_DOC_STAMPS = \
scanobj-build.stamp
EXTRA_DIST = $(MAINTAINER_DOC_STAMPS) $(srcdir)/inspect/*.xml \
$(SCANOBJ_FILES) $(content_files) $(extra_files) \
$(HTML_IMAGES) $(DOC_MAIN_SGML_FILE) $(DOC_OVERRIDES) \
$(DOC_MODULE)-sections.txt $(FIGURES_SOURCEFILES)
# we don't add scanobj-build.stamp here since they are built manually by docs
# maintainers and result is commited to git
DOC_STAMPS = \
scan-build.stamp \
tmpl-build.stamp \
sgml-build.stamp \
html-build.stamp \
scan.stamp \
tmpl.stamp \
sgml.stamp \
html.stamp
# files generated/updated by gtkdoc-scangobj
SCANOBJ_FILES = \
$(DOC_MODULE).args \
$(DOC_MODULE).hierarchy \
$(DOC_MODULE).interfaces \
$(DOC_MODULE).prerequisites \
$(DOC_MODULE).signals \
$(DOC_MODULE).types
SCANOBJ_FILES_O = \
.libs/$(DOC_MODULE)-scan.o
# files generated/updated by gtkdoc-scan
SCAN_FILES = \
$(DOC_MODULE)-sections.txt \
$(DOC_MODULE)-overrides.txt \
$(DOC_MODULE)-decl.txt \
$(DOC_MODULE)-decl-list.txt
REPORT_FILES = \
$(DOC_MODULE)-undocumented.txt \
$(DOC_MODULE)-undeclared.txt \
$(DOC_MODULE)-unused.txt
CLEANFILES = \
$(SCANOBJ_FILES_O) \
$(REPORT_FILES) \
$(DOC_STAMPS) \
inspect-registry.xml
INSPECT_DIR = inspect
### inspect GStreamer plug-ins; done by documentation maintainer ###
# only look at the plugins in this module when building inspect .xml stuff
@ENABLE_GTK_DOC_TRUE@INSPECT_REGISTRY = $(top_builddir)/docs/plugins/inspect-registry.xml
@ENABLE_GTK_DOC_TRUE@INSPECT_ENVIRONMENT = \
@ENABLE_GTK_DOC_TRUE@ LC_ALL=C \
@ENABLE_GTK_DOC_TRUE@ GST_PLUGIN_SYSTEM_PATH_1_0= \
@ENABLE_GTK_DOC_TRUE@ GST_PLUGIN_PATH_1_0=$(top_builddir)/gst:$(top_builddir)/sys:$(top_builddir)/ext:$(top_builddir)/plugins:$(top_builddir)/src:$(top_builddir)/gnl \
@ENABLE_GTK_DOC_TRUE@ GST_REGISTRY_1_0=$(INSPECT_REGISTRY) \
@ENABLE_GTK_DOC_TRUE@ PKG_CONFIG_PATH="$(GST_PKG_CONFIG_PATH)" \
@ENABLE_GTK_DOC_TRUE@ $(INSPECT_EXTRA_ENVIRONMENT)
MAINTAINERCLEANFILES = $(MAINTAINER_DOC_STAMPS)
# wildcard is apparently not portable to other makes, hence the use of find
inspect_files = $(shell find $(srcdir)/$(INSPECT_DIR) -name '*.xml')
SUBDIRS =
FIGURES_SOURCEFILES = camerabin.dot
FIGURES_IMAGES = camerabin.png
all: all-recursive
.SUFFIXES:
.SUFFIXES: .dot .png
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/common/upload-doc.mak $(top_srcdir)/common/gtk-doc-plugins.mak $(am__configure_deps)
@for dep in $?; do \
case '$(am__configure_deps)' in \
*$$dep*) \
( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
&& { if test -f $@; then exit 0; else break; fi; }; \
exit 1;; \
esac; \
done; \
echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu docs/plugins/Makefile'; \
$(am__cd) $(top_srcdir) && \
$(AUTOMAKE) --gnu docs/plugins/Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
*config.status*) \
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
*) \
echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
esac;
$(top_srcdir)/common/upload-doc.mak $(top_srcdir)/common/gtk-doc-plugins.mak:
$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(am__aclocal_m4_deps):
mostlyclean-libtool:
-rm -f *.lo
clean-libtool:
-rm -rf .libs _libs
# This directory's subdirectories are mostly independent; you can cd
# into them and run 'make' without going through this Makefile.
# To change the values of 'make' variables: instead of editing Makefiles,
# (1) if the variable is set in 'config.status', edit 'config.status'
# (which will cause the Makefiles to be regenerated when you run 'make');
# (2) otherwise, pass the desired values on the 'make' command line.
$(am__recursive_targets):
@fail=; \
if $(am__make_keepgoing); then \
failcom='fail=yes'; \
else \
failcom='exit 1'; \
fi; \
dot_seen=no; \
target=`echo $@ | sed s/-recursive//`; \
case "$@" in \
distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
*) list='$(SUBDIRS)' ;; \
esac; \
for subdir in $$list; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
dot_seen=yes; \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| eval $$failcom; \
done; \
if test "$$dot_seen" = "no"; then \
$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
fi; test -z "$$fail"
ID: $(am__tagged_files)
$(am__define_uniq_tagged_files); mkid -fID $$unique
tags: tags-recursive
TAGS: tags
tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
set x; \
here=`pwd`; \
if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
include_option=--etags-include; \
empty_fix=.; \
else \
include_option=--include; \
empty_fix=; \
fi; \
list='$(SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
test ! -f $$subdir/TAGS || \
set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
fi; \
done; \
$(am__define_uniq_tagged_files); \
shift; \
if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
test -n "$$unique" || unique=$$empty_fix; \
if test $$# -gt 0; then \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
"$$@" $$unique; \
else \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
$$unique; \
fi; \
fi
ctags: ctags-recursive
CTAGS: ctags
ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
$(am__define_uniq_tagged_files); \
test -z "$(CTAGS_ARGS)$$unique" \
|| $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
$$unique
GTAGS:
here=`$(am__cd) $(top_builddir) && pwd` \
&& $(am__cd) $(top_srcdir) \
&& gtags -i $(GTAGS_ARGS) "$$here"
cscopelist: cscopelist-recursive
cscopelist-am: $(am__tagged_files)
list='$(am__tagged_files)'; \
case "$(srcdir)" in \
[\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
*) sdir=$(subdir)/$(srcdir) ;; \
esac; \
for i in $$list; do \
if test -f "$$i"; then \
echo "$(subdir)/$$i"; \
else \
echo "$$sdir/$$i"; \
fi; \
done >> $(top_builddir)/cscope.files
distclean-tags:
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
distdir: $(DISTFILES)
@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
list='$(DISTFILES)'; \
dist_files=`for file in $$list; do echo $$file; done | \
sed -e "s|^$$srcdirstrip/||;t" \
-e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
case $$dist_files in \
*/*) $(MKDIR_P) `echo "$$dist_files" | \
sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
sort -u` ;; \
esac; \
for file in $$dist_files; do \
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
if test -d $$d/$$file; then \
dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
if test -d "$(distdir)/$$file"; then \
find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
else \
test -f "$(distdir)/$$file" \
|| cp -p $$d/$$file "$(distdir)/$$file" \
|| exit 1; \
fi; \
done
@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
$(am__make_dryrun) \
|| test -d "$(distdir)/$$subdir" \
|| $(MKDIR_P) "$(distdir)/$$subdir" \
|| exit 1; \
dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
$(am__relativize); \
new_distdir=$$reldir; \
dir1=$$subdir; dir2="$(top_distdir)"; \
$(am__relativize); \
new_top_distdir=$$reldir; \
echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
($(am__cd) $$subdir && \
$(MAKE) $(AM_MAKEFLAGS) \
top_distdir="$$new_top_distdir" \
distdir="$$new_distdir" \
am__remove_distdir=: \
am__skip_length_check=: \
am__skip_mode_fix=: \
distdir) \
|| exit 1; \
fi; \
done
$(MAKE) $(AM_MAKEFLAGS) \
top_distdir="$(top_distdir)" distdir="$(distdir)" \
dist-hook
check-am: all-am
check: check-recursive
all-am: Makefile all-local
installdirs: installdirs-recursive
installdirs-am:
install: install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
installcheck: installcheck-recursive
install-strip:
if test -z '$(STRIP)'; then \
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
install; \
else \
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
"INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
fi
mostlyclean-generic:
clean-generic:
-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
distclean-generic:
-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@echo "it deletes files that may require special tools to rebuild."
-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
clean: clean-recursive
clean-am: clean-generic clean-libtool clean-local mostlyclean-am
distclean: distclean-recursive
-rm -f Makefile
distclean-am: clean-am distclean-generic distclean-local \
distclean-tags
dvi: dvi-recursive
dvi-am:
html-am:
info: info-recursive
info-am:
install-data-am: install-data-local
install-dvi: install-dvi-recursive
install-dvi-am:
install-exec-am:
install-html: install-html-recursive
install-html-am:
install-info: install-info-recursive
install-info-am:
install-man:
install-pdf: install-pdf-recursive
install-pdf-am:
install-ps: install-ps-recursive
install-ps-am:
installcheck-am:
maintainer-clean: maintainer-clean-recursive
-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic
mostlyclean: mostlyclean-recursive
mostlyclean-am: mostlyclean-generic mostlyclean-libtool
pdf: pdf-recursive
pdf-am:
ps: ps-recursive
ps-am:
uninstall-am: uninstall-local
.MAKE: $(am__recursive_targets) install-am install-strip
.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am all-local \
check check-am clean clean-generic clean-libtool clean-local \
cscopelist-am ctags ctags-am dist-hook distclean \
distclean-generic distclean-libtool distclean-local \
distclean-tags distdir dvi dvi-am html html-am info info-am \
install install-am install-data install-data-am \
install-data-local install-dvi install-dvi-am install-exec \
install-exec-am install-html install-html-am install-info \
install-info-am install-man install-pdf install-pdf-am \
install-ps install-ps-am install-strip installcheck \
installcheck-am installdirs installdirs-am maintainer-clean \
maintainer-clean-generic mostlyclean mostlyclean-generic \
mostlyclean-libtool pdf pdf-am ps ps-am tags tags-am uninstall \
uninstall-am uninstall-local
html: html-build.stamp
upload: $(FORMATS)
@if echo $(FORMATS) | grep html > /dev/null; then \
echo "Preparing docs for upload (rebasing cross-references) ..." ; \
if test x$(builddir) != x$(srcdir); then \
echo "make upload can only be used if srcdir == builddir"; \
exit 1; \
fi; \
# gtkdoc-rebase sometimes gets confused, so reset everything to \
# local links before rebasing to online links \
gtkdoc-rebase --html-dir=$(builddir)/html 2>/dev/null 2>/dev/null ; \
rebase=`gtkdoc-rebase --verbose --online --html-dir=$(builddir)/html` ; \
echo "$$rebase" | grep -e "On-*line"; \
for req in glib gobject gstreamer gstreamer-libs gst-plugins-base-libs; do \
if ! ( echo "$$rebase" | grep -i -e "On-*line.*/$$req/" ); then \
echo "===============================================================================" ; \
echo " Could not determine online location for $$req docs. Cross-referencing will be " ; \
echo " broken, so not uploading. Make sure the library's gtk-doc documentation is " ; \
echo " installed somewhere in /usr/share/gtk-doc. " ; \
echo "===============================================================================" ; \
exit 1; \
fi; \
done; \
export SRC="$$SRC html"; \
fi; \
if echo $(FORMATS) | grep ps > /dev/null; then export SRC="$$SRC $(DOC).ps"; fi; \
if echo $(FORMATS) | grep pdf > /dev/null; then export SRC="$$SRC $(DOC).pdf"; fi; \
\
# upload releases to both X.Y/ and head/ subdirectories \
export DIR=$(DOC_BASE)/gstreamer/$(PACKAGE_VERSION_MAJOR).$(PACKAGE_VERSION_MINOR)/$(DOC); \
echo Uploading $$SRC to $(DOC_SERVER):$$DIR; \
ssh $(DOC_SERVER) mkdir -p $$DIR; \
rsync -rv -e ssh --delete $$SRC $(DOC_SERVER):$$DIR; \
ssh $(DOC_SERVER) chmod -R g+w $$DIR; \
\
export DIR=$(DOC_BASE)/gstreamer/head/$(DOC); \
echo Uploading $$SRC to $(DOC_SERVER):$$DIR; \
ssh $(DOC_SERVER) mkdir -p $$DIR; \
rsync -rv -e ssh --delete $$SRC $(DOC_SERVER):$$DIR; \
ssh $(DOC_SERVER) chmod -R g+w $$DIR; \
\
if echo $(FORMATS) | grep html > /dev/null; then \
echo "Un-preparing docs for upload (rebasing cross-references) ..." ; \
gtkdoc-rebase --html-dir=$(builddir)/html ; \
fi; \
echo Done
help:
@echo
@echo "If you are a doc maintainer, run 'make update' to update"
@echo "the documentation files maintained in git"
@echo
@echo Other useful make targets:
@echo
@echo check-inspected-versions: make sure the inspected plugin info
@echo is up to date before a release
@echo
# update the stuff maintained by doc maintainers
update: scanobj-update
$(MAKE) check-outdated-docs
@ENABLE_GTK_DOC_TRUE@all-local: html-build.stamp
#### scan gobjects; done by documentation maintainer ####
@ENABLE_GTK_DOC_TRUE@scanobj-update:
@ENABLE_GTK_DOC_TRUE@ -rm scanobj-build.stamp
@ENABLE_GTK_DOC_TRUE@ $(MAKE) scanobj-build.stamp
# gstdoc-scanobj produces 5 output files (.new)
# scangobj-merge.py merges them into the file which we commit later
# TODO: also merge the hierarchy
@ENABLE_GTK_DOC_TRUE@scanobj-build.stamp: $(SCANOBJ_DEPS) $(basefiles)
@ENABLE_GTK_DOC_TRUE@ @echo " DOC Introspecting gobjects"
@ENABLE_GTK_DOC_TRUE@ @if test x"$(srcdir)" != x. ; then \
@ENABLE_GTK_DOC_TRUE@ for f in $(SCANOBJ_FILES) $(SCAN_FILES); \
@ENABLE_GTK_DOC_TRUE@ do \
@ENABLE_GTK_DOC_TRUE@ if test -e $(srcdir)/$$f; then cp -u $(srcdir)/$$f . ; fi; \
@ENABLE_GTK_DOC_TRUE@ done; \
@ENABLE_GTK_DOC_TRUE@ fi; \
@ENABLE_GTK_DOC_TRUE@ mkdir -p $(INSPECT_DIR); \
@ENABLE_GTK_DOC_TRUE@ scanobj_options=""; \
@ENABLE_GTK_DOC_TRUE@ if test "x$(V)" = "x1"; then \
@ENABLE_GTK_DOC_TRUE@ scanobj_options="--verbose"; \
@ENABLE_GTK_DOC_TRUE@ fi; \
@ENABLE_GTK_DOC_TRUE@ $(INSPECT_ENVIRONMENT) \
@ENABLE_GTK_DOC_TRUE@ CC="$(GTKDOC_CC)" LD="$(GTKDOC_LD)" \
@ENABLE_GTK_DOC_TRUE@ CFLAGS="$(GTKDOC_CFLAGS) $(CFLAGS) $(WARNING_CFLAGS)" \
@ENABLE_GTK_DOC_TRUE@ LDFLAGS="$(GTKDOC_LIBS) $(LDFLAGS)" \
@ENABLE_GTK_DOC_TRUE@ $(GST_DOC_SCANOBJ) $$scanobj_options --type-init-func="gst_init(NULL,NULL)" \
@ENABLE_GTK_DOC_TRUE@ --module=$(DOC_MODULE) --source=$(PACKAGE) --inspect-dir=$(INSPECT_DIR) && \
@ENABLE_GTK_DOC_TRUE@ echo " DOC Merging introspection data" && \
@ENABLE_GTK_DOC_TRUE@ $(PYTHON) \
@ENABLE_GTK_DOC_TRUE@ $(top_srcdir)/common/scangobj-merge.py $(DOC_MODULE) || exit 1; \
@ENABLE_GTK_DOC_TRUE@ if test x"$(srcdir)" != x. ; then \
@ENABLE_GTK_DOC_TRUE@ for f in $(SCANOBJ_FILES); \
@ENABLE_GTK_DOC_TRUE@ do \
@ENABLE_GTK_DOC_TRUE@ cmp -s ./$$f $(srcdir)/$$f || cp ./$$f $(srcdir)/ ; \
@ENABLE_GTK_DOC_TRUE@ done; \
@ENABLE_GTK_DOC_TRUE@ fi; \
@ENABLE_GTK_DOC_TRUE@ touch scanobj-build.stamp
@ENABLE_GTK_DOC_TRUE@$(DOC_MODULE)-decl.txt $(SCANOBJ_FILES) $(SCANOBJ_FILES_O): scan-build.stamp
@ENABLE_GTK_DOC_TRUE@ @true
### scan headers; done on every build ###
@ENABLE_GTK_DOC_TRUE@scan-build.stamp: $(HFILE_GLOB) $(EXTRA_HFILES) $(basefiles) scanobj-build.stamp
@ENABLE_GTK_DOC_TRUE@ @echo ' DOC Scanning header files'
@ENABLE_GTK_DOC_TRUE@ @if test x"$(srcdir)" != x. ; then \
@ENABLE_GTK_DOC_TRUE@ for f in $(SCANOBJ_FILES) $(SCAN_FILES); \
@ENABLE_GTK_DOC_TRUE@ do \
@ENABLE_GTK_DOC_TRUE@ if test -e $(srcdir)/$$f; then cp -u $(srcdir)/$$f . ; fi; \
@ENABLE_GTK_DOC_TRUE@ done; \
@ENABLE_GTK_DOC_TRUE@ fi
@ENABLE_GTK_DOC_TRUE@ @_source_dir='' ; \
@ENABLE_GTK_DOC_TRUE@ for i in $(DOC_SOURCE_DIR) ; do \
@ENABLE_GTK_DOC_TRUE@ _source_dir="$${_source_dir} --source-dir=$$i" ; \
@ENABLE_GTK_DOC_TRUE@ done ; \
@ENABLE_GTK_DOC_TRUE@ gtkdoc-scan \
@ENABLE_GTK_DOC_TRUE@ $(SCAN_OPTIONS) $(EXTRA_HFILES) \
@ENABLE_GTK_DOC_TRUE@ --module=$(DOC_MODULE) \
@ENABLE_GTK_DOC_TRUE@ $${_source_dir} \
@ENABLE_GTK_DOC_TRUE@ --ignore-headers="$(IGNORE_HFILES)"; \
@ENABLE_GTK_DOC_TRUE@ touch scan-build.stamp
#### update templates; done on every build ####
# in a non-srcdir build, we need to copy files from the previous step
# and the files from previous runs of this step
@ENABLE_GTK_DOC_TRUE@tmpl-build.stamp: $(DOC_MODULE)-decl.txt $(SCANOBJ_FILES) $(DOC_MODULE)-sections.txt $(DOC_OVERRIDES)
@ENABLE_GTK_DOC_TRUE@ @echo ' DOC Rebuilding template files'
@ENABLE_GTK_DOC_TRUE@ @if test x"$(srcdir)" != x. ; then \
@ENABLE_GTK_DOC_TRUE@ for f in $(SCANOBJ_FILES) $(SCAN_FILES); \
@ENABLE_GTK_DOC_TRUE@ do \
@ENABLE_GTK_DOC_TRUE@ if test -e $(srcdir)/$$f; then cp -u $(srcdir)/$$f . ; fi; \
@ENABLE_GTK_DOC_TRUE@ done; \
@ENABLE_GTK_DOC_TRUE@ fi
@ENABLE_GTK_DOC_TRUE@ @gtkdoc-mktmpl --module=$(DOC_MODULE)
@ENABLE_GTK_DOC_TRUE@ @$(PYTHON) \
@ENABLE_GTK_DOC_TRUE@ $(top_srcdir)/common/mangle-tmpl.py $(srcdir)/$(INSPECT_DIR) tmpl
@ENABLE_GTK_DOC_TRUE@ @touch tmpl-build.stamp
@ENABLE_GTK_DOC_TRUE@tmpl.stamp: tmpl-build.stamp
@ENABLE_GTK_DOC_TRUE@ @true
#### xml ####
@ENABLE_GTK_DOC_TRUE@sgml-build.stamp: tmpl.stamp scan-build.stamp $(CFILE_GLOB) $(top_srcdir)/common/plugins.xsl $(expand_content_files)
@ENABLE_GTK_DOC_TRUE@ @echo ' DOC Building XML'
@ENABLE_GTK_DOC_TRUE@ @-mkdir -p xml
@ENABLE_GTK_DOC_TRUE@ @for a in $(srcdir)/$(INSPECT_DIR)/*.xml; do \
@ENABLE_GTK_DOC_TRUE@ xsltproc --stringparam module $(MODULE) \
@ENABLE_GTK_DOC_TRUE@ $(top_srcdir)/common/plugins.xsl $$a > xml/`basename $$a`; done
@ENABLE_GTK_DOC_TRUE@ @for f in $(EXAMPLE_CFILES); do \
@ENABLE_GTK_DOC_TRUE@ $(PYTHON) $(top_srcdir)/common/c-to-xml.py $$f > xml/element-`basename $$f .c`.xml; done
@ENABLE_GTK_DOC_TRUE@ @gtkdoc-mkdb \
@ENABLE_GTK_DOC_TRUE@ --module=$(DOC_MODULE) \
@ENABLE_GTK_DOC_TRUE@ --source-dir=$(DOC_SOURCE_DIR) \
@ENABLE_GTK_DOC_TRUE@ --expand-content-files="$(expand_content_files)" \
@ENABLE_GTK_DOC_TRUE@ --main-sgml-file=$(srcdir)/$(DOC_MAIN_SGML_FILE) \
@ENABLE_GTK_DOC_TRUE@ --output-format=xml \
@ENABLE_GTK_DOC_TRUE@ --ignore-files="$(IGNORE_HFILES) $(IGNORE_CFILES)" \
@ENABLE_GTK_DOC_TRUE@ $(MKDB_OPTIONS)
@ENABLE_GTK_DOC_TRUE@ @cp ../version.entities xml
@ENABLE_GTK_DOC_TRUE@ @touch sgml-build.stamp
@ENABLE_GTK_DOC_TRUE@sgml.stamp: sgml-build.stamp
@ENABLE_GTK_DOC_TRUE@ @true
#### html ####
@ENABLE_GTK_DOC_TRUE@html-build.stamp: sgml.stamp $(DOC_MAIN_SGML_FILE) $(content_files)
@ENABLE_GTK_DOC_TRUE@ @echo ' DOC Building HTML'
@ENABLE_GTK_DOC_TRUE@ @rm -rf html
@ENABLE_GTK_DOC_TRUE@ @mkdir html
@ENABLE_GTK_DOC_TRUE@ @cp $(srcdir)/$(DOC_MAIN_SGML_FILE) html
@ENABLE_GTK_DOC_TRUE@ @for f in $(content_files); do cp $(srcdir)/$$f html; done
@ENABLE_GTK_DOC_TRUE@ @cp -pr xml html
@ENABLE_GTK_DOC_TRUE@ @cp ../version.entities html
@ENABLE_GTK_DOC_TRUE@ @mkhtml_options=""; \
@ENABLE_GTK_DOC_TRUE@ gtkdoc-mkhtml 2>&1 --help | grep >/dev/null "\-\-verbose"; \
@ENABLE_GTK_DOC_TRUE@ if test "$(?)" = "0"; then \
@ENABLE_GTK_DOC_TRUE@ if test "x$(V)" = "x1"; then \
@ENABLE_GTK_DOC_TRUE@ mkhtml_options="$$mkhtml_options --verbose"; \
@ENABLE_GTK_DOC_TRUE@ fi; \
@ENABLE_GTK_DOC_TRUE@ fi; \
@ENABLE_GTK_DOC_TRUE@ cd html && gtkdoc-mkhtml $$mkhtml_options $(DOC_MODULE)-@GST_API_VERSION@ $(DOC_MAIN_SGML_FILE)
@ENABLE_GTK_DOC_TRUE@ @rm -f html/$(DOC_MAIN_SGML_FILE)
@ENABLE_GTK_DOC_TRUE@ @rm -rf html/xml
@ENABLE_GTK_DOC_TRUE@ @rm -f html/version.entities
@ENABLE_GTK_DOC_TRUE@ @test "x$(HTML_IMAGES)" = "x" || for i in "" $(HTML_IMAGES) ; do \
@ENABLE_GTK_DOC_TRUE@ if test "$$i" != ""; then cp $(srcdir)/$$i html ; fi; done
@ENABLE_GTK_DOC_TRUE@ @echo ' DOC Fixing cross-references'
@ENABLE_GTK_DOC_TRUE@ @gtkdoc-fixxref --module=$(DOC_MODULE) --module-dir=html --html-dir=$(HTML_DIR) $(FIXXREF_OPTIONS)
@ENABLE_GTK_DOC_TRUE@ @touch html-build.stamp
@ENABLE_GTK_DOC_TRUE@clean-local-gtkdoc:
@ENABLE_GTK_DOC_TRUE@ @rm -rf xml tmpl html
# clean files copied for nonsrcdir templates build
@ENABLE_GTK_DOC_TRUE@ @if test x"$(srcdir)" != x. ; then \
@ENABLE_GTK_DOC_TRUE@ rm -rf $(SCANOBJ_FILES) $(SCAN_FILES) $(REPORT_FILES) \
@ENABLE_GTK_DOC_TRUE@ $(MAINTAINER_DOC_STAMPS); \
@ENABLE_GTK_DOC_TRUE@ fi
@ENABLE_GTK_DOC_FALSE@all-local:
@ENABLE_GTK_DOC_FALSE@clean-local-gtkdoc:
clean-local: clean-local-gtkdoc
@rm -f *~ *.bak
@rm -rf .libs
distclean-local:
@rm -f $(REPORT_FILES) \
$(DOC_MODULE)-decl-list.txt $(DOC_MODULE)-decl.txt
@rm -rf tmpl/*.sgml.bak
@rm -f $(DOC_MODULE).hierarchy
@rm -f *.stamp || true
@if test "$(abs_srcdir)" != "$(abs_builddir)" ; then \
rm -f $(DOC_MODULE)-docs.sgml ; \
rm -f $(DOC_MODULE).types ; \
rm -f $(DOC_MODULE).interfaces ; \
rm -f $(DOC_MODULE)-overrides.txt ; \
rm -f $(DOC_MODULE).prerequisites ; \
rm -f $(DOC_MODULE)-sections.txt ; \
rm -rf tmpl/*.sgml ; \
rm -rf $(INSPECT_DIR); \
fi
@rm -rf *.o
# thomas: make docs parallel installable; devhelp requires majorminor too
install-data-local:
(installfiles=`echo $(builddir)/html/*.sgml $(builddir)/html/*.html $(builddir)/html/*.png $(builddir)/html/*.css`; \
if test "$$installfiles" = '$(builddir)/html/*.sgml $(builddir)/html/*.html $(builddir)/html/*.png $(builddir)/html/*.css'; \
then echo '-- Nothing to install' ; \
else \
$(mkinstalldirs) $(DESTDIR)$(TARGET_DIR); \
for i in $$installfiles; do \
echo '-- Installing '$$i ; \
$(INSTALL_DATA) $$i $(DESTDIR)$(TARGET_DIR); \
done; \
pngfiles=`echo ./html/*.png`; \
if test "$$pngfiles" != './html/*.png'; then \
for i in $$pngfiles; do \
echo '-- Installing '$$i ; \
$(INSTALL_DATA) $$i $(DESTDIR)$(TARGET_DIR); \
done; \
fi; \
echo '-- Installing $(builddir)/html/$(DOC_MODULE)-@GST_API_VERSION@.devhelp2' ; \
if test -e $(builddir)/html/$(DOC_MODULE)-@GST_API_VERSION@.devhelp2; then \
$(INSTALL_DATA) $(builddir)/html/$(DOC_MODULE)-@GST_API_VERSION@.devhelp2 \
$(DESTDIR)$(TARGET_DIR)/$(DOC_MODULE)-@GST_API_VERSION@.devhelp2; \
fi; \
$(GTKDOC_REBASE) --relative --dest-dir=$(DESTDIR) --html-dir=$(DESTDIR)$(TARGET_DIR) || true ; \
fi)
uninstall-local:
if test -d $(DESTDIR)$(TARGET_DIR); then \
rm -rf $(DESTDIR)$(TARGET_DIR)/*; \
rmdir -p $(DESTDIR)$(TARGET_DIR) 2>/dev/null || true; \
else \
echo '-- Nothing to uninstall' ; \
fi;
#
# Checks
#
@ENABLE_GTK_DOC_TRUE@check-hierarchy: $(DOC_MODULE).hierarchy
@ENABLE_GTK_DOC_TRUE@ @if grep ' ' $(DOC_MODULE).hierarchy; then \
@ENABLE_GTK_DOC_TRUE@ echo "$(DOC_MODULE).hierarchy contains tabs, please fix"; \
@ENABLE_GTK_DOC_TRUE@ /bin/false; \
@ENABLE_GTK_DOC_TRUE@ fi
@ENABLE_GTK_DOC_TRUE@check: check-hierarchy
check-inspected-versions:
@echo Checking plugin versions of inspected plugin data ...; \
fail=0 ; \
for each in $(inspect_files) ; do \
if (grep -H '<version>' $$each | grep -v '<version>$(VERSION)'); then \
echo $$each should be fixed to say version $(VERSION) or be removed ; \
echo "sed -i -e 's/<version.*version>/<version>$(VERSION)<\/version>/'" $$each; \
echo ; \
fail=1; \
fi ; \
done ; \
exit $$fail
check-outdated-docs:
$(AM_V_GEN)echo Checking for outdated plugin inspect data ...; \
fail=0 ; \
if [ -d $(top_srcdir)/.git/ ]; then \
files=`find $(srcdir)/inspect/ -name '*xml'`; \
for f in $$files; do \
ver=`grep '<version>$(PACKAGE_VERSION)</version>' $$f`; \
if test "x$$ver" = "x"; then \
plugin=`echo $$f | sed -e 's/^.*plugin-//' -e 's/.xml//'`; \
# echo "Checking $$plugin $$f"; \
pushd "$(top_srcdir)" >/dev/null; \
pinit=`git grep -A3 GST_PLUGIN_DEFINE -- ext/ gst/ sys/ | grep "\"$$plugin\""`; \
popd >/dev/null; \
# echo "[$$pinit]"; \
if test "x$$pinit" = "x"; then \
printf " **** outdated docs for plugin %-15s: %s\n" $$plugin $$f; \
fail=1; \
fi; \
fi; \
done; \
fi ; \
exit $$fail
#
# Require gtk-doc when making dist
#
@ENABLE_GTK_DOC_TRUE@dist-check-gtkdoc:
@ENABLE_GTK_DOC_FALSE@dist-check-gtkdoc:
@ENABLE_GTK_DOC_FALSE@ @echo "*** gtk-doc must be installed and enabled in order to make dist"
@ENABLE_GTK_DOC_FALSE@ @false
# FIXME: decide whether we want to dist generated html or not
# also this only works, if the project has been build before
# we could dist html only if its there, but that might lead to missing html in
# tarballs
dist-hook: dist-check-gtkdoc dist-hook-local
mkdir $(distdir)/html
cp html/* $(distdir)/html
-cp $(srcdir)/$(DOC_MODULE).types $(distdir)/
-cp $(srcdir)/$(DOC_MODULE)-sections.txt $(distdir)/
cd $(distdir) && rm -f $(DISTCLEANFILES)
-gtkdoc-rebase --online --relative --html-dir=$(distdir)/html
.PHONY : dist-hook-local docs check-outdated-docs inspect
# avoid spurious build errors when distchecking with -jN
.NOTPARALLEL:
.dot.png:
dot -Tpng $< -o$@
update-figures: $(FIGURES_IMAGES)
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: